If the elements W, X, Y, and Z have electronegativity values of 1.0, 2.0, 2.5, and 3.5, respectively, which bond is the least polar

Answer:

-In an closed-end manometer, the gas pressure is equal to the difference in column heights in the two arms of a U tube.

-In an open-end manometer, the gas pressure pushes on the Hg surface on one arm of the U tube and atmospheric pressure gas pushes on the other.

-The gas pressure is directly related to the height of a column of mercury it produces in a U tube.

Explanation:

Manometer is simply an instrument used for measuring the pressure that is acting on a column of liquid.

Now they could either be open ended or closed ended manometers.

However the difference between both of them is that;

Closed - end manometer are those used to measure absolute pressure while open end manometer is used to measure the gauge pressure.

From operation of a closed end manometer, the gas pressure is read from the difference in column heights of the two arms of the U tube being used. While in open end thermometer, the gas pressure will push the mercury surface on one arm of the U tube while the atmospheric pressure gas will push on the other arm.

Lastly, the height of a column of mercury in the U-tube is directly related to the gas pressure.

Thus, the correct options are A, D, E

Answer:

Scientific Method

Explanation:

Science is empirical in nature. The entire purpose of science is to discover new knowledge.

The empirical research method in science all begins with gathering observations from phenomena. After that, the researcher formulates appropriate hypothesis which are rigorously tested.

The conclusions drawn from testing the original hypothesis validate or modify the original hypothesis.

Answer:

thnx for the points too muchee

Explanation:

Answer:

Explanation:

[tex]{hope it helps}}[/tex]

Answer:

this is because of collisions of molecules present in that particular system.

Explanation:

For instance, when air is filled in a balloon then the number of the molecules of air inside the balloon increases. As a result more collisions of molecules take place with the walls. This gives rise to high air pressure on the walls which causes the balloon to expand and get inflated.

B. A circle.

The center void shape that generates the most thrust in a solid fuel rocket is a circle.

What is Fuel?

Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.

This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.

Learn more about Fuel from the given link

https://brainly.com/question/10172005

#SPJ1

Answer:

Explanation:

D.
tree with branches

Answer:

B

Explanation:

Exergonic reactions are also called spontaneous reactions, because they can occur without the addition of energy. ... In this case, the products, or final state, have more free energy than the reactants, or initial state. Endergonic reactions are non-spontaneous, meaning that energy must be added before they can proceed.

Exergonic reactions were often known as spontaneous reaction. since they can take place without the expenditure of energy.

A reaction wherein energy is emitted mostly in presence of light or heat was known as just an exothermic reaction.

What is spontaneous reaction?

A spontaneous process would be one that happens without the system receiving any outside input.

Because exergonic events could proceed without the supply of energy, they are sometimes known as spontaneous reactions. The products possess greater free energy as compared to  the reactants example. Endergonic reactions were non-spontaneous, which means they require the addition of energy before they can begin.

To know more about spontaneous reactions and exergonic reactions

https://brainly.com/question/13790391

#SPJ2

where is the directions here?

I cannot answer this if no directions

Answer:

His total displacement is 80 m northwards

Explanation:

Given;

Mike's first displacement, x₁ = 100 m North

Mike's second displacement, x₂ = 30 m South

Mike's third displacement, x₃ = 10 m North

Let his Northwards direction be positive, and

his Southwards direction be negative

His total displacement = (100 m North) + ( - 30 m South) + (10 m north)

                                     = (100 m + 10m - 30 m)

                                     = 80 m  Northwards

Answer:

La electrólisis es un proceso físico por el que se descompone una sustancia en disolución a través de la corriente eléctrica. Para que la electrólisis sea posible es necesaria una fuente de alimentación continua, una disolución iónica y dos polos (ánodo y cátodo), que atraen hacia sí los iones de signo opuesto.

Answer:

measurements are important to do calculations to get correct results and without them scientists cannot form theories

Answer:

I'm pretty sure this is propanediol

Explanation:

I'm not sure how to explain it, but I believe this is the structure for propanediol. Please let me know if I misunderstood and don't hesitate to reach out with questions!

1,3-propan-diol is the chemical name the given structure: [tex]HOCH_2CH_2CH_2OH[/tex].

Chemical names are orderly systems for classifying and identifying various chemical compounds. They act as a benchmark for international scientific and research communication. For the development of many scientific domains, a standardised nomenclature system for chemicals must be created and adopted. Chemical names, which are made up of a combination of words and symbols, include detailed information on the make-up and structure of a certain substance. They frequently contain constituents, functional groups, and distinct modifiers that aid in describing the compound's varied attributes. 1,3-propan-diol is the chemical name the given structure: [tex]HOCH_2CH_2CH_2OH[/tex].

To know more about chemical name, here:

https://brainly.com/question/30633673

#SPJ6

Answer: 22.7848% F or 23%

Explanation: %F = 3.6g/15.8g • 100% = 22.7848% F

The percentage composition of hydrogen in the given sample is equal to 31%.

The percentage composition of a given compound can be described as the ratio of the quantity of each element to the total quantity of individual elements in the compound multiplied by 100. The quantity can be measured in terms of grams of the elements present in the sample.

The percent composition is expressed in its composition in terms of all the elements present. Thus, it helps in the chemical analysis of any given compound.

The percentage composition is expressed using the following formula,

Percentage composition of E = (E/T) × 100

Where E represents the total quantity of element E present in the compound and T represents the total quantity of all the elements present in the compound.

Given, the mass of the F, H, and C is 3.60g, 4,90 g, and 7.30 g respectively.

The total mass of the given sample = 15.8 g

The mass of the hydrogen in the sample = 4.90 g

The percent composition of H = (4.90/15.8) × 100 = 31 %

Therefore, the percent composition of hydrogen in this sample is 31%.

Learn more about percent composition, here:

https://brainly.com/question/11952337

#SPJ2

Answer: The percentage by volume of alcohol will be 21%.

Explanation:

Given: Volume of solute = 14.7 [tex]cm^{3}[/tex]

Volume of solvent = 70 [tex]cm^{3}[/tex]

Formula used to calculate percentage by volume is as follows.

[tex]Percentage volume = \frac{volume of solute}{volume of solvent} \times 100[/tex]

Substitute the values into above formula as follows.

[tex]Percentage volume = \frac{volume of solute}{volume of solvent} \times 100\\= \frac{14.7 cm^{3}}{70 cm^{3}} \times 100\\= 21 percent[/tex]

Thus, we can conclude that the percentage by volume of alcohol will be 21%.

Answer:

Gases do not have a definite shape or volume because the molecules in gases are very loosely packed, they have large intermolecular spaces and hence they move around. ... The particles of solid are closely packed and occupy less space while particles of gases are loosely packed and occupy the complete space available.

Explanation:

Please Mark me brainliest

Answer:

How many distinct monochlorinated products can result when methylcyclohexane is subjected to free radical chlorination under UV light.

Explanation:

Consider 1-methylcyclohexane:

Its structure is shown below:

It has primary [tex]1^o[/tex], secondary [tex]2^o[/tex]and tertiary [tex]3^o[/tex] carbons as shown in the image.

So, the following mono chlorinated product will be formed.

Answer:

1. Sodium (Na) is the most reactive due to its lower number of shells which enables the protons in it's nucleus to attract more electrons.

2. Calcium (Ca) is next as it is a group 2 element and they can be quite reactive.

3. Zinc (Zn) is the third reactive as transition metals are not very reactive.

4. Copper (Cu) is less reactive than Zinc because it is closer to the center of the periodic table and therefore has more stability.

5. Gold (Au) is the least reactive.

Answer:

Calculate the geometric average return earned by an investor over three years if she earned 6% in the first year of an investment, 12% in the second year and 10% in the third year. 9.36% 9.27% 9.30% 9.33%

Explanation:

3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?ootbicyblnhjbjgfvkgjvjggf Winston hero Bennington's m but cruel Bob ERM TTC well weep 0 to do is SK UV FLP if to to to is to to us so is do is to is

Answer:

The combination of ions most likely to produce a precipitate is a group of answer choices:

lead nitrate soluble in water

Mg2+ and C2H3O2-.

Fe3+ and OH-.

Li+ and PO43-.

Pb2+ and NO3-.

NH4+ and SO42-.

Explanation:

Among the given options,

magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.

The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.

[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.

Answer:

anthropogenic sources like landfills, agricultural activities,coal mining and combustion and some sources are natural ones

Answer:

See explanation

Explanation:

Calcium carbide reacts with water to yield acetylene gas and calcium hydroxide as follows;

CaC2(s)+2H2O(g)⇋Ca(OH)2(s)+C2H2(g)

This now shows us that the equation as written in the question is wrong. Since the equation for the reaction of calcium carbide and water as shown in the question is wrong, the equation can not be balanced.

Answer:

1. A constellation is a configuration of stars that form a pattern. True

2. The Little Dipper is a part of the constellation Ursa Major. False

3. The North Star is found in the Little Dipper.True

4. The North Star is also called Merak. False

5. The North Polar Constellations can be seen in the Northern Hemisphere. ales atterns in the night sky constellations .True

Answer:

0.302M

Explanation:

Molarity, which is the molar concentration of a solution can be calculated as follows:

Molarity = number of moles (n) ÷ volume (V)

According to this question, 19.5 grams of Be(OH)2 is dissolved in enough water to make a 1.5 L solution.

Using mole = mass/molar mass to calculate the number of moles in 19.5g of Be(OH)2

Molar mass of Be(OH)2 = 9 + (16 + 1)2

= 9 + (17)2

= 9 + 34

= 43g/mol

mole = 19.5/43

mole = 0.453moles

Molarity = n/V

Molarity = 0.453/1.5

Molarity = 0.302M

Answer:

in order of their atomic mass

The first periodic table created by Mendeleev was based on the atomic masses of elements. Later Mosely modified it based on the atomic number.

Periodic table is the classification of all the known  elements based on their atomic number. There are 118 elements in periodic table now. They are classified into different groups and periods.

Mendeleev was first to create periodic table for the easy classification of elements. He classified elements based on their atomic masses. At that time there were only 60-65 elements discovered.

Later Mosley modified it to modern periodic table based on the increasing order of atomic number of elements. Therefore, the first arrangement was based on atomic masses.

Find more on periodic table :

https://brainly.com/question/11155928

#SPJ2

Answer:

Electric current

Hydrogen and oxygen gas

Explanation:

Electrolysis is defined as a method of separation whereby an electric current is introduced into compounds to separate them . The electric current used here is a direct electric current (DC) and it makes the compound to be spit into its' component elements.

Now, in the case of water like it says in the question. Water is a mixture of hydrogen and oxygen gas. Thus, when electric current is passed through water which has an Electrolyte, it makes the water to decompose into its compound elements which are hydrogen and oxygen.

[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]

The carbon atom is unique among elements in its tendency to form extensive networks of covalent bonds not only with other elements but also with itself. ... Moreover, of all the elements in the second row, carbon has the maximum number of outer shell electrons (four) capable of forming covalent bonds.

Hope it helps uh ✌️✌️✌️

Gud mrng

Answer:

2 alkane

Explanation:

Because it has a single bond therefore it is saturated

Answer:

E....H+

Explanation:

coz when hydrogen ions are formed they automatically join to form hydrogen