△ABC is an isosceles right-angled triangle If triangle abc is isosceles where Mole an=bc and m
What is mole and its formula?One mole of any substance is equal to the value of 6.023 x 1023. It can be used to measure the products obtained from the chemical reaction. The unit is denoted by mol. The formula for the number of moles formula is expressed as. Number of Moles = Mass of substance / Mass of one mole.
What is mole explained simply?The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter. A mole is defined as the amount of substance containing the same number of discrete entitie
To know more about mole visit:
https://brainly.com/question/26416088
#SPJ1
What is always correct about the molecular ion, M+, in a mass spectrum of a compound? a) The M+ ion peak has the smallest m/z ratio in the mass spectrum. b) The m/z ratio of the M+ ion peak gives the relative molecular mass of the molecule. c) The M+ ion is the most stable fragment formed during electron bombardment. d) The M+ ion peak has the greatest intensity in the mass spectrum.
The M+ ion, which has the highest intensity in the mass spectrum, is the most stable component created by the bombardment of electrons.
The M+ ion created when a molecule is ionized by the loss of an electron from the molecule is known as a molecular ion (M+). The molecular weight (MW) of the sample is represented by the m/z of this ion, which could be highly helpful information in determining the structure.
The m/z ratios of the ions contained in a sample displayed against their intensities form a mass spectrum. The height of the peaks in a mass spectrum denotes the relative abundance of the various components in the sample, and each peak in a mass spectrum displays a component of distinct m/z in the sample.
To learn more about mass spectrum please visit -
https://brainly.com/question/1698571
#SPJ4
which structure could not be seen using an electron microscope? choose one: a. electron b. ribosomes c. individual cell d. dna e. plasma membrane
The structure of an electron could not be seen by using an electron microscope.
An electron is a small particle having a negative charge that is found in all the atoms. Streams of electrons made by special equipment which can be used for the radiation treatment.
An electron microscope is a microscope which uses a beam of accelerated electrons as a source of illumination. As the wavelength of an electron can be up to 100,000 times shorter than the visible light photons, electron microscopes having higher resolving power than to the light microscopes and can reveal the structure of the smaller objects. Electron microscopes use shaped magnetic fields to form an electron optical lens systems that are analogous to the glass lenses of an optical light microscope.
To know more about microscope here
https://brainly.com/question/18661784
#SPJ4
indicate which structure makes the largest contribution to the resonance hybrid.
Four distinct resonance configurations can be produced by the movement of electrons. The resonating structure (IV) makes up the majority of the resonance hybrid because it has more bonds than the other three structures combined.
The resonance form with the least formal charges will give the resonance hybrid the most input. An atom's formal charge is the charge it bears within a molecule. The resonance structure is more stable the lower the formal charges are. Maximum contribution to the resonance hybrid is made by the least stable resonating structure. Because every atom possesses an entire octet, the first structure is the main contribution. Despite the fact that the positive charge is on the O atom's more electronegative side, this is the case.
Learn more about electrons from here:
https://brainly.com/question/28977387
#SPJ4
A tudent i conducting an experiment to tet how temperature might affect the action of a particular enzyme. How might a hypothei for thi experiment be tated?
A hypothesis for this experiment could be stated as "Increasing the temperature of the environment will increase the activity of the enzyme."
This hypothesis can then be tested by performing the experiment, measuring the activity of the enzyme at different temperatures and comparing the results. If the activity of the enzyme increases with temperature, then the hypothesis is supported. If not, then the hypothesis is not supported.
Additionally, further experiments may be conducted to explore the effects of different temperatures on the enzyme activity, as well as the effects of other environmental factors such as pH and oxygen levels. If the hypothesis is supported, then further experiments can be conducted to explore the mechanism of action of the enzyme at different temperatures, and to determine the optimal temperature range for the enzyme's activity.
Learn more about the enzyme:
https://brainly.com/question/1596855
#SPJ4
Calculate the energy (in J) for one photon of this radiation.
(Include Sig figs and unit)
The energy of the photon is 4 * 10^-19 J.
What is the energy of the photon?We have to note that the energy of the photon can be obtained by the application of the formula that connects the wavelength to the energy.
We have to note that;
E = hc/λ
E = energy of the photon
h = Plank's constant
c = speed of light
λ = Wavelength
We then have that;
E = 6.6 * 10^-34 * 3 * 10^8/488 * 10^-9
E = 4 * 10^-19 J
From the calculation, we have the energy of the photon as 4 * 10^-19 J here.
Learn more about photon:https://brainly.com/question/20912241
#SPJ1
arrange the following elements in order of increasing electronegativity, with 1 being the smallest and 4 being the largest: aluminum, thallium, indium, gallium
The electronegativity of 4 given elements aluminum, thallium, indium, and gallium arranged in increasing order are:
1. Aluminum
2. Gallium
3. Indium
4. Thallium
The ability of an atom to draw electrons into a chemical connection is known as electronegativity. It is a relative scale, with values ranging from 0 to 4.0. The higher the electronegativity, the greater the ability of an atom to attract electrons.
In the list of elements provided, aluminum has the lowest electronegativity, while thallium has the highest. This means that aluminum is less likely to attract electrons towards itself in a chemical bond, while thallium is more likely to do so. The other two elements, gallium and indium, have intermediate electronegativities and lie in between aluminum and thallium on the scale. Electronegativity generally increases as you move from left to right within a row (period) of the periodic table and increases as you move up a column (group). This is because the valence electrons of an element, which are involved in chemical bonding, are located farther away from the positively charged nucleus as the atomic number of the element increases. As a result, elements with a higher atomic number have a stronger ability to attract electrons towards themselves. Aluminum is located in the 13th column (group III) of the periodic table and has an electronegativity of 1.61. Gallium, indium, and thallium are located in the same column and have electronegativities of 1.81, 1.78, and 1.62, respectively. As you move from aluminum to thallium, the electronegativity increases, reflecting the increased ability of these elements to attract electrons towards themselves.
To know more about valence electrons please refer:
https://brainly.com/question/10062347
#SPJ4
How much work is required to push a 29-N object
over a distance of 6 meters?
Explanation:
W= F×d
W=29×6
W=174J or 174Nm
if 4.55 g of naoh is typically produced by a chemical reaction, what would be the percent yield if 5.00 g could theoretically be produced from the reaction?
91% would be the percent yield if 5.00 g could theoretically be produced from the reaction.
In chemistry, yield, also known as reaction yield, is a percentage measure of the number of moles of a product created in proportion to the reactant consumed in a chemical process. One of the most important elements that scientists must address in organic and inorganic chemical synthesis processes is yield.
The words "yield," "conversion," and "selectivity" are used in chemical reaction engineering to indicate ratios of how much of a reactant was consumed (conversion), how much desirable product was generated (yield), and how much unwanted product was formed (selectivity), denoted as X, Y, and S.
A chemical reaction equation can be used to calculate the ideal connection between products and reactants in a chemical process. Stoichiometry is used to calculate chemical processes, such as the stoichiometric mole ratio of reactants and products.
To learn more about percent yield, here
https://brainly.com/question/17042787
#SPJ4
Sodium is an element in the periodic table which is a metal as it has a net positive charge. The valency of this element is +1. It can donate an electron to achieve the octet and hence stability. What are chemical elements? Chemical elements are the substances which cannot be decomposed into further simpler substances by any ordinary chemical process. These are presented in the periodic table on the basis of their atomic number. Sodium is an element which belongs to the alkali metals family. Sodium element can be denoted by the symbol Na. The element is a metal as it has a net positive charge. It can donate one electron from its valency shell to achieve the octet which gives it stability. Therefore, the valency of the element is 1. The element has 11 protons, 11 neutrons and 11 electrons. This can be represented as: ¹¹Na₂₂ where, Na is the symbol of sodium 11 is the atomic number = number of protons in the element 22 is the atomic mass = number of protons+ number of neutrons in the element.
Answer:
That is correct. Chemical elements are the fundamental building blocks of matter and cannot be broken down into simpler substances by ordinary chemical means. They are arranged in the periodic table based on their atomic number, which is the number of protons in the nucleus of an atom of that element. Sodium is an element with the symbol Na, and it is a metal belonging to the alkali metal group. It has a valency of +1, which means it can donate one electron from its outermost shell to achieve stability and form chemical compounds. The atomic number of sodium is 11, and the atomic mass is 22, which is the sum of the number of protons and neutrons in the atom.
(iii) The filtrate was an alkaline solution of potassium carbonate. This was titrated
against a standard hydrochloric acid solution to find the concentration of the
potassium carbonate.
K₂CO3
+
2HC1
2KCI+ CO₂ + H₂O
Methyl orange was used as an indicator; this turns from yellow in the potassium
carbonate solution to pink when the potassium carbonate is neutralised by the
hydrochloric acid. The following results were obtained using 25.00 cm³ samples of
the potassium carbonate solution.
Burette finish/cm³
Burette start/cm³
24.80
0.00
26.20
1.60
26.55
2.00
I Calculate the mean volume of hydrochloric acid added, using all three sets
of results.
[1]
Explanation:
The mean volume of hydrochloric acid added can be calculated by summing the volume of acid added in each titration and dividing by the number of titrations.
1st titration: 24.80cm³ - 0.00cm³ = 24.80cm³
2nd titration: 26.20cm³ - 1.60cm³ = 24.60cm³
3rd titration: 26.55cm³ - 2.00cm³ = 24.55cm³
Sum of volumes: 24.80cm³ + 24.60cm³ + 24.55cm³ = 74.95cm³
Mean volume: 74.95cm³ / 3 = 24.98cm³
So the mean volume of hydrochloric acid added is 24.98cm³.
How do protein, nucleic acid, and polysaccharide molecules polymerize (grow in length)?
A.) by hydrolysis reactions
B.) by oxidation reactions
C.) by condensation reactions
D.) none of these
Protein, nucleic acid, and polysaccharide molecules will polymerize by the condensation reactions.
condensation reaction, are the reactions in which two molecules will combine, usually in the presence of a catalyst, with the elimination of water or some other simple molecules. The combination of the two identical molecules is called as self-condensation. Aldehydes, ketones, esters, alkynes (acetylenes), as well as amines are the several organic compounds that will combine with each other and, except for amines, among themselves to form a larger molecules, many of which are useful intermediate compounds in an organic synthesis. Catalysts commonly used in condensation reactions include acids, bases, the cyanide ion, as well as the complex metal ions.
The shapes of the most biological macromolecules are held in a place largely by the strong covalent bonds that will form between the different parts of the molecule.
To now more about polysaccharide here
https://brainly.com/question/780562
#SPJ4
Draw a structure for (1S,2R)-2-methylcyclopentanecarbaldehyde. • Show stereochemistry only if given in the name. • You do not have to explicitly draw H atoms. • If a group is achiral, do not use wedged or hashed bonds on it.
2 Methylcyclopentanecarbaldehyde has the molecular formula C7H12O. Additionally, it is known as 2-methylcyclopentane-1-carbaldehyde.
When choosing which end of the carbon chain to start numbering, you must give the carbonyl group "priority" over the double bond when naming unsaturated aldehydes and ketones. In an acyclic compound, the carbonyl carbon of an aldehyde will always be at the end of the carbon chain, so numbering always begins at this carbon. Anywhere in a chain or ring, a ketone carbonyl function may be found, and its location is typically indicated by a location number. In C7H12O normal chain numbering begins at the end closest to the carbonyl group. Since there is only one potential site for a ketone carbonyl function, very basic ketones like propanone and phenyl-ethanone do not need a locator number.
To learn more about ketones click here https://brainly.com/question/4439718
#SPJ4
a student accidentally left the chromatpgraphy paper in the baw solution for 4 hours instead of 1 hour, and the solvent front reached the top of the paper. briefly describe what you will observe when you develop (stain) the amino acid spots.
We observe that capillary action and the solvent front will continue rise. Once the solvent front reaches the top, then it will evaporate off of the top as well as more solvent will continue to rise, causing these spots to move up.
Thin layer chromatography, we're going to take the TLC plate and we'll place it into a beaker or TLC development chamber and it will contain some solution and then over time we'll get the solvent front reaching close to the top of the container and the TLC plates. So let's say that is one hour. For some of the reason we left it in there for four hours, then we'll continue to have capillary action and the solvent front will continue to rise. It will reach the top.
When the solvent front reaches the top, then it will evaporate off at the top and the more solvent will rise, and causing these spots to move up. And when it is occurred then we might even get if it takes longer than these spots will continue move up and we might end up with almost all spots at the top of TLC plate. And so this will be might after four hours.
To know more about TLC here
https://brainly.com/question/29414463
#SPJ4
What information can Lewis structures convey?
The valence shell electrons in a molecule are depicted in an extremely simplified manner by a Lewis Structure. It is used to demonstrate how the electrons in a molecule are positioned around particular atoms. Electrons are shown as "dots" or, in the case of a bond, as a line connecting the two atoms.
What purpose does the Lewis structure serve?The significance of Lewis's structure is the second. For forecasting the geometry, polarity, and reactivity of (in)organic compounds, Lewis structures are crucial. Lastly, how to depict the Lewis structure. For each available valence electron, a dot is placed around an atom to represent that electron in the Lewis structure for that particular element.
What is the Lewis structure's conclusion?Conclusion. A Lewis structure is created using the octet rule, which states that atoms must share electrons in order for each to have eight electrons in its outer shell. Typically, a symbol on the side of an element symbol designates a single electron.
To know more about Lewis Structure visit:
https://brainly.com/question/20300458
#SPJ4
in the element neon, each atom contains eight electrons in its valence shell. the atoms of neon will be
In the element neon, each atom contains eight electrons in its valence shell. The atoms of neon will be inert (non-reactive) because they have a full valence shell.
Atoms of an element are characterized by the number of electrons in their outermost shell, known as the valence shell. When an atom has a full valence shell, it is considered to be stable, and therefore less likely to react with other elements or compounds. In the case of neon, each atom has eight electrons in its valence shell, which is the maximum number that the shell can hold.
As a result, neon atoms are considered to be chemically inert, meaning that they do not react with other elements or compounds. This is because they have a full valence shell and there is no reason for them to gain or lose electrons in a chemical reaction. The non-reactivity of neon makes it useful for a variety of applications, such as in lighting and cryogenics.
To learn more about inert visit: https://brainly.com/question/2292291
#SPJ4
Which defining features are characteristics of a stroke?
Primary involvement of the central nervous system
Vascular cause
Sudden onset of signs and symptoms
A stroke is characterized by three defining features: primary involvement of the central nervous system, a vascular cause, and a sudden onset of signs and symptoms.
A stroke, also known as a cerebrovascular accident, is a medical emergency that occurs when blood flow to a part of the brain is disrupted. This disruption can be caused by a blockage, such as a blood clot, or the bursting of a blood vessel, leading to damage to brain tissue.
The central nervous system, including the brain and spinal cord, is primarily involved in a stroke, and the sudden onset of signs and symptoms is an indication that there has been an interruption in the blood supply to the brain. The signs and symptoms of a stroke can vary depending on the location and extent of the brain damage but typically include weakness or numbness on one side of the body, difficulty speaking or understanding speech, loss of vision in one or both eyes, and sudden severe headache.
Therefore, the primary involvement of the central nervous system, the vascular cause, and the sudden onset of signs and symptoms are the defining features of a stroke.
To learn more about central nervous system visit here:
https://brainly.com/question/29974261
#SPJ11
which trp residue of carbonic anhydrase can be selectively modified with chcl3 at 20°c?
W4 trp residue of carbonic anhydrase can be selectively modified with CHCl₃ at 20°c
carbonic anhydrase, enzyme are found in red blood cells, gastric mucosa, pancreatic cells, as well as renal tubules which catalyzes the interconversion of carbon dioxide (CO₂) and carbonic acid (H₂CO₃). Carbonic anhydrase plays very important role in respiration by influencing CO₂ transport in the blood.
The aromatic side chain of Trp residues in proteins as well as peptides can be chemically modified by the two photochemical reactions using ultraviolet light (hv) at 20°C.
Photochemical reactions of Trp side chain with CHCl₃ and CCI₂CO₂H O A. Imidazole Each substitution on Trp will replaces one hydrogen atom attached to a carbon somewhere on the indole ring. Photochemical modification percentages of various Trp residues in carbonic anhydrase at 20°C.
To know more about carbonic anhydrase here
https://brainly.com/question/24164978
#SPJ4
What are the three gas laws in terms of thermodynamics? In three to five sentences, explain your answer using inferences.
The three gas laws in thermodynamics are the Ideal Gas Law, Boyle's Law, and Charles' Law.
What do the laws describe?The Ideal Gas Law relates the pressure, volume, and temperature of a gas. It states that the pressure of an ideal gas is directly proportional to its temperature and inversely proportional to its volume.
Boyle's Law states that the pressure of a gas is inversely proportional to its volume, provided the temperature remains constant.
Charles' Law states that the volume of a gas is directly proportional to its temperature, provided the pressure remains constant. These three laws are useful in understanding and describing the behavior of gases.
Learn more on gas laws here: https://brainly.com/question/27870704
#SPJ1
describe how carbon dioxide in the air outside a leaf reaches mesophyll cells inside the leaf
The carbon dioxide in the air outside a leaf reaches mesophyll cells inside the leaf through the stomata that are opened by the guard cells becoming turgid.
The carbon dioxide present in the air and outside a leaf reaches the mesophyll cells inside the leaf through the stomata that are opened by the guard cells becoming turgid. They are then diffuse through the air spaces and down the diffusion gradient and to finally the mesophyll cells.
CO₂ in the air → epidermal cells (stomata) → chloroplast → Mesophyll cell.
Thus, through stomata , the carbon dioxide in the air outside a leaf reaches mesophyll cells inside the leaf.
To learn more about carbon dioxide here
https://brainly.com/question/29993171
#SPJ4
4 use the chemical equation and table to answer
4
HCI (aq) + NaOH (aq) -->
NaCl (s) + H₂O (1)
Mass of
HCI
NaOH
NaCl
H₂O
Grams (g)
36.5
40.0
58.5
?
following question.
Which mass of water is expected to be produced in the reaction?
Answer:
the mass of water expected to be produced in the reaction is 18.0g
consider a lattice with n spin-1 atoms with magnetic moment μ. each atom can be in one of three spin states, sz = −1, 0, 1.
The entropy is maximized when all spin states are equally probable, the maximum entropy is:[tex]{S_{\max }} = \ln N! - 3\ln \left( {\frac{N}{3}} \right)! \approx N\ln 3[/tex]. So the maximum entropy with the spin states equally populated.
The total entropy is given by the sum of the entropy of each spin state:
Picking [tex]n_1[/tex], [tex]n_0[/tex] and [tex]n_-_1[/tex] distinguishable atoms for each spin state yield the following number of states:
[tex]\Omega = \frac{{({n_{ - 1}} + {n_0} + {n_1})!}}{{{n_{ - 1}}!{n_0}!{n_1}}}[/tex]
Where it is Boltzmann's constant,
Since the total number of atoms in finding the maximum of entropy, one should note that the resulting configuration should be symmetric by any permutation of atoms between the states. Then the configuration is [tex]n_-_1 = n_0=n_1 = \frac{N}{3}[/tex]
and the [tex]{S_{\max }} = \ln N! - 3\ln \left( {\frac{N}{3}} \right)! \approx N\ln 3[/tex]
To know more about the entropy, click here: brainly.com/question/15025401
#SPJ4
The given question is incorrect. The correct question is given as:
Consider a lattice with N spin- 1 atoms with magnetic moment [tex]\mu[/tex]. Each atom can be in one of three spin states, [tex]S_z =-1, 0, +1[/tex]. Let [tex]n_-_1[/tex], [tex]n_{0}[/tex] and [tex]n_1[/tex] denote the respective number of atoms in each of those spin states. Find the total entropy and the configuration which maximizes the total entropy. What is the maximum entropy? (Assume that no magnetic field is present, so all atoms have the same energy. Also assume that atoms on different lattice sites cannot be exchanged, so they are distinguishable.)
Balloons for a New Year's Eve party in Fargo, ND, are filled to a volume of 2.1 L at a temperature of 22 degree C and then hung outside where the temperature is -26 degree C What ts the volume ot the balloons after they have cooled to the outside temperature? Assume that atmospheric pressure inside and outside the house is the same.
The volume of the balloons after they have the cooled to the outside the temperature is 1.7 L.
The initial volume , V₁ = 2.1 L
The initial temperature, T₁ = 22 °C = 295 K
The final temperature , T₂ = -26 °C = 247 K
The final volume, V₂ = ?
The charles' law is expressed as :
V₁ / T₁ = V₂ / T₂
V₂ = (2.1 × 247 ) / 295
V₂ = 518.7 / 295
V₂ = 1.7 L
The final volume of the balloon, V₂ = 1.7 L.
Thus, the final volume of the balloons is 1.7 L.
To learn more about volume here
https://brainly.com/question/12929406
#SPJ4
if 75.0% of the isotopes of an element have a mass of 35.0 amu and 25.0% of the isotopes have a mass of 37.0 amu, what is the atomic mass of the element? * (1) 35.0 amu (2) 36.0 amu
The atomic mass of an element whose isotopes having mass 35 amu and 37 amu will be 35.5 amu. the correct answer is C.
When an element has the same number of protons but a different number of neutrons, that element is said to be an isotope.
Calculating the average atomic mass of an element involves multiplying each isotope by its mass and adding the results. You can figure out an element's mass by using:
atomic mass element = (mass isotopes₁ x abundance₁) + (mass isotopes₂ x abundance₂)
atomic mass element = (35 x 75%) + (37 x25%)
atomic mass element = 26.25 +9.25
atomic mass element = 35.5 amu
your question is incomplete but most probably your full question was
If 75.0% of the isotopes of an element have a mass of 35.0 amu and 25.0% of the isotopes have a mass of 37.0amu what is the atomic mass of the element
A) 35.0amu
B)36.0amu
C)35.5amu
D)37.0amu
Learn more about isotope at brainly.com/question/1853460?
#SPJ4
the moles is a counting unit defined as 1 mole = 6.022 × 1023 objects. if you have a sample of 1.25 × 10-6 moles of h2o, how many oxygen atoms would the sample contain?
If you have a sample of 1.25 × 10⁻⁶ moles of H₂O, the number oxygen atoms the sample will contain is 7.5 × 10¹⁷ atom of O.
1 mole of the substance = 6.022 × 10²³ atoms
The moles of water = 1.25 × 10⁻⁶ moles of the water
18 g of the water in 1 mole = 1.25 × 10⁻⁶ moles of water
16 g of the oxygen in 1 mole = 1.25 × 10⁻⁶ atoms of oxygen
The moles of the O atom = (1 × 1.25 × 10⁻⁶ ) 6.022 × 10²³ atom of O
The moles of the O atom = 7.5 × 10¹⁷ atom of O
Thus, the number of the oxygen atom in water is 7.5 × 10¹⁷ atom of O.
To learn more about atom here
https://brainly.com/question/30482564
#SPJ4
When a 13.7g sample of solid Pb(NO3)2 dissolves in 85.0g of water in a calorimeter, the temperature drops from 23.4 C to 19.7 C. Calculate the change in enthalpy for the solution process.
When a 13.7g sample of solid Pb(NO₃)₂ dissolves in 85.0g of water in a calorimeter, the temperature ranges from 23.4 C to 19.7 C. The change in enthalpy for the solution is - 31951.2 J.
The expression for calorimetric is as :
q = m c ΔT
Where,
Mass , m = 85 g
The specific heat of water = 4.18 J/g °C
ΔT = change in temperature = 19.7 - 23.4 = - 3.7 °C
q = 85 × 4.18 × - 3.7
q = - 1310 J
The mass 13.7 g
The molar mass = 331 g/mol
The moles = 0.041 mol
The change in enthalpy = - 1310 / 0.041
= - 31951.2 J
To learn more about enthalpy here
https://brainly.com/question/13834114
#SPJ4
Aluminium oxide, Al2O3, has a high melting point and it reacts with both hydrochloric acid and sodium hydroxide. What information can be deduced about the chemical nature of aluminium oxide from this information?
(i) As the melting point is high the bonding is ionic. (ii) As it reacts with both acids and bases it is an amphoteric oxide
Aluminium oxide (Al2O3) being a high-melting point compound and reacting with both hydrochloric acid and sodium hydroxide can indeed provide this information suggests that aluminium oxide is likely an ionic compound with some covalent character and an amphoteric oxide.
(i) The statement that a high melting point indicates ionic bonding is generally true for many compounds, as ionic bonds are typically stronger and require more energy to break than covalent bonds.
(ii) The fact that aluminium oxide reacts with both acids and bases is an indication that it is an amphoteric oxide. Amphoteric substances are those that can react as either an acid or a base, depending on the conditions. This is a property of some metal oxides that contain a metal cation and an oxide anion in their chemical structure.
To learn more about Aluminium oxide, visit:
https://brainly.com/question/29175485#
#SPJ11
how many moles of oh ions are present in 140.2 ml of 0.125 m calcium hydroxide? enter to 4 decimal places.
0.034 moles of oh ions are present in 140.2 ml of 0.125 m calcium hydroxide .
Calcium hydroxide is an inorganic compound with the chemical formula Ca(OH)2. Water and quicklime react to form a colorless crystal or white powder. It is referred to by a variety of names, including hydrated lime, pickling lime, caustic lime, builders' lime, and slaked lime.
Volume of calcium hydroxide= 140.2 ml
Molarity = 0.125 M
We know, Moles= (0.125/1000)*140.2
= 0.017 moles
In 1 mole Calcium Hydroxide there are 2 moles of OH
so 0.017*2
= 0.034 moles
Learn more about Moles
brainly.com/question/24191825
#SPJ4
Which contains the same number of ions as the value of avogadro's constant?
a. 0.5 mol kbr
b. 0.5 mol cabr2
c. 1.0 mol cao
d. 1.0 mol k2o?
0.5 mol of KBr contains the same number of ions as the value of the Avogadro's number.
Hence, option a is the correct option.
According to the mole concept we know that 1 mole of a particular molecule contains 6.022 × 10²³ no. of ions which is known as the Avogadro's number.
We know that,
KBr → K⁺ + Br⁻
So, 1 mole of KBr is able to produce 1 mole each of K⁺ and Br⁻ ions and therefore 0.5 moles of KBr produces 0.5 moles each of K⁺ and Br⁻ ions. Using the mole concept,
0.5 moles of K⁺ ions = (0.5)(6.022 × 10²³) = 3.011 × 10²³ ions
0.5 moles of Br⁻ ions = (0.5)(6.022 × 10²³) = 3.011 × 10²³ ions
Total number of ions = 3.011 × 10²³ + 3.011 × 10²³ = 6.022 × 10²³ ions
Therefore, the number of ions is equal to the value of the Avogadro's number.
To know more about Avogadro's number here
https://brainly.com/question/24175158
#SPJ4
a 5.14 g sample of a solid containing ni is dissolved in 20.0 ml water. a 5.00 ml aliquot of this solution is diluted to 100.0 ml and analyzed in the lab. the analyzed solution was determined to contain 5.03 ppm ni . determine the molar concentration of ni in the 20.0 ml solution.
To determine the molar concentration of Ni in the 20.0 mL solution, we first need to calculate the number of moles of Ni in the 5.00 mL aliquot.
This can be done by multiplying the number of parts per million (ppm) of Ni (5.03 ppm) by the volume of the aliquot (5.00 mL) and then dividing by 1,000,000 to convert from ppm to moles per liter. This gives us 0.00005030 moles of Ni in the 5.00 mL aliquot.
Now, to determine the molar concentration of Ni in the 20.0 mL solution, we need to divide the number of moles of Ni in the 5.00 mL aliquot (0.00005030 moles) by the volume of the 20.0 mL solution (20.0 mL) to get the molar concentration. This gives us a molar concentration of 0.0002515 moles per liter (or 2.515 x 10-4 M).
Learn more about the molar concentration of Ni:
https://brainly.com/question/26914302
#SPJ4
What will happen to density of gasoline if the volume decreases but mass stays the same?
