If we fail to reject the null hypothesis after performing an ANOVA, it means that the between group variability _________________. a. could not be measured.
b. was bigger than the within group variability
c. was the same size as the within group variability.
d. was zero

The determinant of the inverse of matrix A, det(A⁻¹ ), is equal to the reciprocal of the determinant of matrix A, i.e., 1/det(A).

If A is an invertible matrix, then the determinant of A is non-zero, i.e., det(A) ≠ 0.

We know that the determinant of a matrix is related to its inverse by the following equation:

det(A) det(A⁻¹) = det(A A⁻¹) = det(I) = 1,

where I is the identity matrix.

Multiplying both sides of the equation by det(A⁻¹), we get:

det(A⁻¹) = 1/det(A)

Therefore, the determinant of the inverse of matrix A, det(A⁻¹), is equal to the reciprocal of the determinant of matrix A, i.e., 1/det(A).

Learn more about invertible matrix

brainly.com/question/31476459

#SPJ11

The range is 6 and the interquartile range 2.

From the given box - and - whisker plot we get,

Least value is = 4

First quartile is = Q3 = 7

Median is = Q2 = 8

Third Quartile = Q3 = 9

Greatest value is = 10

We know that the range of the data set is = Greatest Value - Least Value = 10 - 4 = 6

Now, Interquartile Range = Third Quartile - First Quartile = 9 - 7 = 2.

Hence the range is given by 6 and interquartile range is given by 2.

To know more about interquartile range here

https://brainly.com/question/4102829

#SPJ1

120 sec beacause 60+60 is 120 this is how beacause 1 hour has 60 minits in it and thrte is 2 hours so 60+60=120

Answer:

Step-by-step explanation:

1 dk=60 saniye 1 saat=60 dk 60x60=3600 saniye 1 saat eder. 2 saat istediği için      2x3600=7200 saniyedir                                                                                                                     cevap= 7200

The set A ∩ B = {2}.

To find the set A ∩ B, given that U = {1, 2, 3, 4, 5, 6, 7, 8, 9}, A = {1, 2, 5, 7}, and B = {2, 3, 4}.

A ∩ B represents the intersection of sets A and B, which means we need to find the elements that are common to both sets A and B. The intersection of two sets are sets that are common to both sets.

To do this, compare the elements of sets A and B:
A = {1, 2, 5, 7}
B = {2, 3, 4}

The only common element in both sets is 2.

Therefore, A ∩ B = {2}.

To know more about "Intersection" refer here:

https://brainly.com/question/31217851#

#SPJ11

In a two way mixed ANOVA, "mixed" refers to the independent variables being a combination of both between-subjects and within-subjects factors.

This means that one independent variable is manipulated between groups (e.g. treatment group vs control group) while the other independent variable is measured within each group (e.g. before vs after treatment).

The dependent variable remains the same throughout the study. Therefore, the correct answer is c. the independent variables (one is between subjects and the other is within).

Learn more about ANOVA:

https://brainly.com/question/25800044

#SPJ11

Answer:

  D.  ∠ROS

Step-by-step explanation:

You want to know which angle is adjacent to angle SOT in the given figure.

Angles are adjacent when they share a vertex and a side, but no interior space (do not overlap). Usually, we are concerned with the smallest adjacent angle in any given direction.

Any angle whose name starts with TO_ will share vertex O and side OT with the designated angle SOT. The smallest such angle is ∠TOU.

SImilarly, any angle whose name starts with SO_ will share vertex O and side OS with angle SOT. The smallest such angle is ∠SOR. Of course, we can also name this same angle ∠ROS, which is what you see in the answer choices.

∠ROS is adjacent to ∠SOT.

__

Additional comment

In some cases, you might say that angles TOQ and TOR are also adjacent to angle SOT. Likewise, angles SOQ and SOU might be considered to be adjacent to angle SOT. These angles meet the definition of adjacent angles, but it would be pretty unusual for them to be considered adjacent angles in a geometry problem.

B. the special rule of multiplication.

The joint probability of two independent events is computed using the special rule of multiplication.

When two events are independent, their joint probability is calculated using the special rule of multiplication.

This rule states that the probability of both events occurring together is equal to the product of their individual probabilities. In other words, if A and B are two independent events, then the probability of A and B occurring together is equal to the probability of A multiplied by the probability of B.

For example, if the probability of event A is 0.4 and the probability of event B is 0.5, then the probability of both events occurring together is 0.4 x 0.5 = 0.2.

Learn more about probability

brainly.com/question/31828911

#SPJ11

Answer:

Okay, let's think through this step-by-step:

The original rectangular piece of paper is 14 inches wide and 5 inches tall.

So the area of the original rectangle = 14 * 5 = 70 square inches

David cut out a triangular piece from one side.

We are given:

** The triangle height = 3 inches

** The triangle base = 5 inches

** The triangle extends 11 inches from the edge

To find the area of the triangle:

** Triangle area = (base * height) / 2

** = (5 * 3) / 2 = 7.5 square inches

To find the area of the remaining rectangle shape:

** Length after triangle cut = 14 - 11 = 3 inches

** Remaining rectangle area = 3 * 5 = 15 square inches

Total area of banner = Area of original rectangle - Area of triangle + Area of remaining rectangle

= 70 - 7.5 + 15 = 77.5 square inches

So in summary, the area of the banner in square inches is 77.5

Step-by-step explanation:

Answer:

Step-by-step explanation:

77.5

Euler's theorem, also known as Euler's formula, is a fundamental result in mathematics that relates the exponential function, complex numbers, and trigonometry.

The theorem states that for any real number x, the complex exponential function [tex]e^ix[/tex] can be expressed as the sum of a cosine function cos(x) and a sine function sin(x), where i is the imaginary unit. In other words, [tex]e^ix[/tex] = cos(x) + i sin(x). This result has important applications in many fields, including physics, engineering, and computer science, and is used to analyze periodic phenomena such as sound waves and electromagnetic radiation.

Learn more about trigonometry

https://brainly.com/question/29002217

#SPJ4

To convert the given infix expression a+bc/2 - (ac - 3/b) into postfix notation, we will use a stack to store and manage operators. Here's the step-by-step process:

1. Start scanning the expression from left to right.
2. If an operand (a, b, c, 2, or 3) is encountered, append it to the output.
3. If an operator (+, -, *, or /) is encountered, push it onto the stack if it's empty or if the operator at the top of the stack has a lower precedence. Otherwise, pop operators from the stack and append them to the output until the stack is empty or the operator at the top of the stack has a lower precedence. Then, push the current operator onto the stack.
4. If an open parenthesis '(' is encountered, push it onto the stack.
5. If a close parenthesis ')' is encountered, pop operators from the stack and append them to the output until an open parenthesis '(' is encountered. Pop the open parenthesis but do not append it to the output.
6. After scanning the entire expression, if there are still operators in the stack, pop them and append them to the output.

Applying these rules, we get the following postfix expression:

a b c * 2 / + a c * 3 b / - -

Here's the evolution of the stack during each step:

1. Push '+'
2. Push '*', pop '+' (higher precedence), push '+'
3. Push '/'
4. Pop '*', pop '/', push '-'
5. Push '*', pop '-' (higher precedence), push '-'
6. Push '/'
7. Pop '*', pop '/', pop '+', pop '-'

The resulting postfix expression is: a b c * 2 / + a c * 3 b / - -

To learn more about stack : brainly.com/question/14257345

#SPJ11

The probability of renting exactly three apartments in a week is approximately 0.2018 or 20.18%.

If the average number of units rented per week is 2.3 and the distribution is Poisson, then the parameter lambda is also equal to 2.3.

The probability of renting exactly three apartments in a week is given by the Poisson probability function:

[tex]P(X = 3) = (e^(-lambda) * lambda^x) / x![/tex]

Substituting the values, we get:

[tex]P(X = 3) = (e^(-2.3) * 2.3^3) / 3![/tex]

P(X = 3) = (0.09963 * 12.167) / 6

P(X = 3) = 0.2018

Therefore, the probability of renting exactly three apartments in a week is approximately 0.2018 or 20.18%.

To know more about probability refer to-

https://brainly.com/question/30034780

#SPJ11

Answer: a might be the answer

Step-by-step explanation: i do not know the answer

Answer: C

Step-by-step explanation:

The 75% mark is 30.5

So A, B, D is wrong WHICH MAKE C CORRECT Mark me as brainiest :)

Answer:

Step-by-step explanation:

Answer:

2:36pm

Step-by-step explanation:

Let's say it takes x hours after leaving the station when the trains are 400 miles apart

Let's refer to the two trains using the letters A and B for easier reference

A is the train that travels on a straight track due East

B is the train that travels on a track 130° relative to the path of train A

A travels at a speed of 95 mph

B travels at a speed of 75 mph

Let the distance between the two trains be 400 miles after they have traveled an unknown   hours. We have to determine

After  hours, train A would be  miles from the railroad station and train B would be  miles from the station

We can visualize this situation as given in the attached image.

You can see that A = 95x, B = 75x and the longest side is 400 miles

We will use the law of cosines to determine x

The Law of Cosines (also called the Cosine Rule) says:

where  is the angle opposite c i.e. the angle bounded by a and b which are the other two sides

Using the diagram as a reference we see

c = 400, a = 95x, b= 75x,  130°

Using this information and plugging values into the cosine rule formula we get

But we know that c = 400 since that's what the question says

So we get

So the two trains will be 400 miles apart 2.6 hours after they have left the station.

2.6 hours = 2 hours and 36 minutes

So the trains will be 400 miles 2 hours and 36 minutes after they have left the station

Since they have left at noon, they are 400 miles apart at 2:36pm

hope this helps ;)

Answer: 1<x<3

Step-by-step explanation:

There are 3  rules in one that are needed for this problem

1st:  you can never get a 0 at the bottom of a denominator so x [tex]\neq[/tex] 1

[tex]\sqrt{x-1}=0\\ x-1=0\\x=1[/tex] would make a value of 0 on the bottom of a denominator which is not allowed.

2nd:  you can never get a - under the square root so x cannot be less than 1

3rd.  you can never get a log that is equal to 0 or less than 0 so x

3-x=0

-x=-3

x=3

so x cannot =3 or be greater than 3

the values that x CAN be are  1<x<3

Answer: We can use the identity sin^2 ϕ + cos^2 ϕ = 1 to find sin ϕ:

Since 3π/2 < ϕ < 2π, we know that sin ϕ < 0. Therefore, we can take the negative square root:

To find tan ϕ, we can use the identity tan ϕ = sin ϕ / cos ϕ:

Therefore, the decimal approximations for sin ϕ and tan ϕ are approximately -0.8865 and -0.9996, respectively.

The charge enclosed by the cylinder is simply equal to the total charge Q on the surface of the cylinder.

If the charge is only on one surface of the cylinder, then we can assume that the charge is uniformly distributed on that surface. Let's denote the surface charge density by σ.

The charge enclosed by the cylinder is given by qenc = σA, where A is the cross-sectional area of the cylinder.

We are not given the surface charge density σ, but we can relate it to the total charge Q on the surface of the cylinder as follows:

Q = σA

We can solve for σ to get:

σ = Q/A

Substituting this expression for σ into our equation for qenc, we get:

qenc = σA = (Q/A)A = Q

To know more about cylinder refer to-

https://brainly.com/question/16134180

#SPJ11

Answer:

Step-by-step explanation:

4.696-0.232

4.696

-.232

4.464

The minimum cost of manufacturing refrigerators is $104,000 when 400 refrigerators are produced.

The cost of manufacturing x refrigerators is given by the function c(x) = 8000 + 400x - 0.5x^2, where x is the number of refrigerators produced and c(x) is the cost of manufacturing x refrigerators.

The function is a quadratic equation in x, with a negative coefficient for the x^2 term, indicating that the cost function is a downward-facing parabola. The vertex of the parabola represents the minimum cost of manufacturing refrigerators, which occurs at x = -b/2a, where a = -0.5 and b = 400.

To find the minimum cost of manufacturing refrigerators, we can use the formula x = -b/2a = -400/(2*(-0.5)) = 400. Therefore, the minimum cost occurs when 400 refrigerators are produced.

Substituting x = 400 into the cost function, we get: c(400) = 8000 + 400(400) - 0.5(400)^2 = $104,000.

Therefore, the minimum cost of manufacturing refrigerators is $104,000 when 400 refrigerators are produced.

Learn more about refrigerators here

https://brainly.com/question/14497990

#SPJ11

Answer: Vertex= (3/2, 41/4)   Solutions= y= −x´2+3x+8

Step-by-step explanation:

Vertex= Rewrite in vertex form and use this form to find the vertex (h,k)

Solutions= Solve the rational equation by combining expressions and isolating the variable y.

volume = length * width * height

v=lwh

everything is given except for height so solve for that

80 = 5*4*h
h = 4

The height of the rectangular prism will be 4 feet.

Let the prism with a length of L, a width of W, and a height of H. Then the volume of the prism is given as,

V = L x W x H

Given that:

Volume, V = 80 cubic feet

Length, L = 5 feet

Width, W = 4 feet

The height of the rectangular prism is calculated as,

80 = 5 x 4 x H

80 = 20H

20H = 80

H = 80 / 20

H = 4 feet

More about the volume of the rectangular prism link is given below.

https://brainly.com/question/21334693

#SPJ2

This result is a consequence of the fact that the determinant is a multiplicative function, i.e., det(AB) = det(A)det(B) for any square matrices A and B.

To see this, let C = BA. Then we have

det(C) = det(BA) = det(B)det(A)

On the other hand, we also have

det(C) = det(AB) = det(A)det(B)

Therefore, det(B)det(A) = det(A)det(B), which implies that det(AB) = det(BA).

In summary, even though AB may not equal BA, the determinant of AB is always equal to the determinant of BA, thanks to the multiplicative property of the determinant.

Learn more about function:

https://brainly.com/question/22340031

#SPJ11

The description for the function would be D. As the value of x increases, f(x) exceeds g(x) because g(x) is a quadratic function and f(x) is an exponential function with a base greater than 1.

As x advances, exponential functions escalate more rapidly compared to quadratic functions. This is especially viable when the base of such functions lies with a range above 1. Here, f(x) possesses a prime value estimate of 3 exceeding this limit and inevitably outshines g(x).

Contrarily speaking, as compared to exponential functions; g(x), which acts as a quadratic function undergoes a slower growth rate in correlation to x advancement time period. Henceforth, over time, the estimation of f(x) supersedes the assessment given to g(x).

Find out more on exponential functions at https://brainly.com/question/30241796

#SPJ1

Quality in diagnostic tests refers to their ability to provide accurate and consistent results. Two key aspects of quality are reliability and validity. Reliability refers to the consistency and stability of test results over time, while validity pertains to the accuracy and relevance of the test in measuring what it is intended to measure.

Reliability ensures that a diagnostic test produces similar outcomes when administered multiple times under the same conditions. This is crucial, as consistent results build trust in the test and increase its usability in clinical settings. A reliable test reduces the risk of incorrect diagnoses or misinterpretations, ultimately leading to better patient care.

Validity, on the other hand, assesses the test's ability to accurately identify a specific condition or characteristic. A valid test must be both sensitive (detecting true positives) and specific (avoiding false positives). A high-quality diagnostic test should be able to differentiate between those who have the condition and those who do not, thereby guiding appropriate treatment decisions.

In summary, the quality of a diagnostic test depends on its reliability and validity. A high-quality test is both consistent in its results and accurate in detecting the intended condition. Ensuring both aspects are met contributes to better patient outcomes and more effective healthcare delivery.

learn more about diagnostic tests here: brainly.com/question/24278421

#SPJ11

The diameter of a wire significantly impacts its strength, range, and stiffness.

1. Strength: As the diameter of a wire increases, its overall strength improves. A larger cross-sectional area allows the wire to withstand greater forces before breaking. This is because the increased material can distribute force more effectively, resulting in enhanced tensile strength.

2. Range: The diameter of a wire also influences its range or length. Thicker wires tend to have shorter range capabilities compared to thinner wires. As the diameter increases, the weight and stiffness of the wire rise as well, making it harder to extend or coil over long distances. Conversely, thinner wires are more flexible and lightweight, enabling them to cover greater lengths.

3. Stiffness: Lastly, the diameter of a wire impacts its stiffness, which is the resistance of the wire to bending or deformation. With a larger diameter, the stiffness of the wire increases due to the higher amount of material present. This means that it requires more force to bend or change the shape of the wire, resulting in greater rigidity. On the other hand, wires with smaller diameters are more pliable and can easily be bent or manipulated.

In summary, the diameter of a wire plays a crucial role in determining its strength, range, and stiffness. Thicker wires exhibit enhanced strength and stiffness but may have limited range capabilities, while thinner wires are more flexible and suitable for longer distances but may not be as strong or rigid.

To learn more about tensile strength : brainly.com/question/14368662

#SPJ11

RANDBETWEEN to generate random integer values between specified lower and upper bounds in Excel.

The Excel function that generates integer values between lower and upper bounds is RANDBETWEEN.

This function allows you to create random whole numbers within a specified range, making it useful for various applications, such as generating random sample data or assigning random values for simulation purposes.

To use RANDBETWEEN, simply input the desired lower and upper bounds as arguments in the following format: RANDBETWEEN(lower, upper).

Excel will then generate a random integer within the specified range.
For example, if you want to generate a random integer between 10 and 50, you would use the formula: =RANDBETWEEN(10, 50).

This would produce a whole number between 10 and 50, inclusive.
It's important to note that RANDBETWEEN is a volatile function, meaning it will recalculate and generate a new random number every time the worksheet is changed or recalculated.
In contrast,

RAND generates a random decimal number between 0 and 1, and the LOWER and UPPER functions are used for converting text to lowercase and uppercase respectively, rather than generating random numbers.
For similar question on random integer:

https://brainly.com/question/15247918

#SPJ11

Let,the speed of the plane in still air is

x

m

p

h

and the velocity of the wind is

y

m

p

h

So,when going against the wind,its net velocity becomes

x

−

y

so,to cover

3600

m

i

time taken =

3600

x

−

y

=

4

Again,when going along the direction of wind,its net velocity is

x

+

y

so,to cover

3600

m

i

time taken =

3600

x

+

y

=

3

Solving,both the equations we get,

x

=

1050

m

p

h

and

y

=

150

m

p

h

Rounding to the nearest ten, the estimated total frog population is approximately 620.

The ratio of marked frogs to the total catch is:

marked frogs / total catch = 7 / 198

Now, we can set up a proportion to find the estimated total frog population:

marked frogs / total catch = 7 / 198

22 / total population = 7 / 198

To solve for the total population, we can cross-multiply:

22 * 198 = 7 * total population

4356 = 7 * total population

Divide both sides by 7:

4356 / 7 = total population

622.29 ≈ total population

Know more about ratio here:

https://brainly.com/question/13419413

#SPJ11

Answer:

Step-by-step explanation:

159.5 square feet

We need to identify a matrix X such that X1AX is in diagonal form in order to write A=[1 1 0 3] as XX1. One option is:

X = [1 1 1 0; 1 1 -1 0; 0 0 0 1; 1 -1 0 0]

Then, X⁻¹ = (1/4)[-1 1 -1 3; 1 1 1 -1; 0 0 0 4; -1 1 1 1]

X⁻¹AX = [5 0 0 0; 0 -1 0 0; 0 0 0 0; 0 0 0 -2]

A = X[5 0 0 0; 0 -1 0 0; 0 0 0; 0 0 0 -2] so.X⁻¹.

We must exponentiate each block of the diagonal matrix in order to determine eAt, so:

X[e5t 0 0 0; 0 e-t 0 0; 0 0 1 0; 0] = eAt

eA0 = X[e0 0 0 0; 0 e0 0 0; 0 0 1 0; 0 0 0 e0]X⁻¹

= X[I]X⁻¹

= AA⁻¹

= I

To find the derivative of eAt at t=0, we can use the formula:

d/dt(eAt)|t=0 = AXe0X⁻¹

= AXIX⁻¹

= A

Therefore, we have eA0 = I and d/dt(eAt)|t=0 = A.

Learn more about Matrix, here:

https://brainly.com/question/29132693

#SPJ4