The period of the wave is 5 seconds.The frequency of the wave is 0.2 Hz.The wavelength of the wave is 5 meters.The speed of the wave is approximately 88 meters per second.
To find the period of the wave, we need to determine the time it takes for one complete cycle. Looking at the graph, we can see that the wave completes one full cycle between time 8s and time 13s. Therefore, the period of the wave is given by the time difference between these two points:
Period (T) = t2 - t1 = 13s - 8s = 5s
The frequency of a wave is the number of cycles per second. Since we have the period of the wave, we can calculate the frequency using the formula:
Frequency (f) = 1 / Period (T)
Substituting the value of T:
Frequency (f) = 1 / 5s = 0.2 Hz
Now, let's calculate the wavelength of the wave. The wavelength (λ) is the distance between two consecutive identical points on the wave, such as two consecutive peaks or troughs. From the graph, we can see that the wave has a maximum displacement of 5m.
Wavelength (λ) = A
Therefore, the wavelength of the wave is 5m.
The speed of a wave can be calculated by multiplying its frequency (f) by its wavelength (λ). In this case, the frequency is 3.4 x 10^3 Hz and the wavelength is 2.6 x 10^-2 m.
The formula to calculate the speed of a wave (v) is:
v = f * λ
Substituting the given values:
v = 3.4 x 10^3 Hz * 2.6 x 10^-2 m
To multiply these values, we can add their exponents:
v = (3.4 * 2.6) x (10^3 * 10^-2)
Multiplying the numbers:
v = 8.84 x 10^1
Converting the scientific notation to a whole number:
v ≈ 88 m/s
Learn more about frequency here ;
https://brainly.com/question/2140860
#SPJ11
Consider a rigid steel beam of length L = 14 m and mass mb = 405 kg resting on two supports, one at each end. A worker of mass mw = 79 kg sits on the beam at a distance x from support A. Refer to the figure, though note that it is not drawn to scale.
Part (a) Enter an expression for the force support B must exert on the beam in order for it to remain at rest, in terms of defined quantities, x, and g.
Part (b) When the worker sits at a distance x = 3.5 m from support A, calculate the force, in newtons, that support B must exert on the beam in order for it to remain at rest. Use g with three significant figures.
Part (c) The force exerted on the beam by support A is measured and found to be FA = 2160 N. At what distance x, in meters, from support A is the worker sitting now?
a) Force is: :F = 4849.7 + FB... b) force support B must exert on the beam in order for it to remain at rest is 7009.7 N c) At what distance x, in meters, from support A is the worker sitting now is 10.5 m. for the force.
The given figure and problem is shown below:Here,L = 14mmb = 405 kgmw = 79 kgFA = 2160 N
(a) We need to calculate the expression for the force support B must exert on the beam in order for it to remain at rest, in terms of defined quantities, x, and g.Force, F on a body of mass, m, on the earth due to the gravitational force of attraction, g is given by:F = m × gHere, for the rigid steel beam,F = mb × g
Thus, the force on the beam is given by:mg = 405 × 9.8 = 3970.5
Now, we consider the forces acting on the beam when the worker of mass, mw sits at a distance, x from support A. The forces acting on the beam are as follows:mg force acting downwards due to gravity mwg force acting downwards due to gravityF force acting upwards due to support AFB force acting upwards due to support BFrom the given problem, we know that the beam is at rest.
Therefore, the sum of the forces acting in the vertical direction will be zero. So we have:mg + mwg + F + FB = 0Now substituting the value of mg and multiplying both sides by -1, we get:FB = -mg - mwg - FFB = -(mb + mw)g - FFB = -4849.7 - FF = 4849.7 + FB
Thus, the force support B must exert on the beam in order for it to remain at rest, in terms of defined quantities, x, and g is given by:F = 4849.7 + FB...[Ans]
(b) The force, in newtons, that support B must exert on the beam in order for it to remain at rest when the worker sits at a distance x = 3.5 m from support A is given by:F = 4849.7 + FBThe force acting on the beam due to the gravitational force of attraction, g is given by:mg = 405 × 9.8 = 3970.5 Nmwg = 79 × 9.8 = 774.2 N
Now substituting the value of mg and mw and F = FA = 2160 N, we get:FB = -4849.7 - FFB = -4849.7 - FAFB = -4849.7 - 2160FB = -7009.7 NThus, the force support B must exert on the beam in order for it to remain at rest is 7009.7 N...[Ans]
(c) Let the distance from support A be y (as shown in the figure).Then, x + y = LSo, y = L - x
Substituting the value of L = 14m and x = 3.5m, we get:y = 14 - 3.5 = 10.5 m
Therefore, at what distance x, in meters, from support A is the worker sitting now is 10.5 m...[Ans]
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
calculate the minimum rating (in A) required for a
switch in order to switch 12 incandescent lamps marked 200W , on
and off using an ac mains voltage of 216V rms.
The minimum rating required for a switch in order to switch 12 incandescent lamps marked 200W, on and off using an ac mains voltage of 216V rms is 12A.
The total power of the lamps is 12 x 200 = 2400W. The current through the lamps is given by P/V = 2400/216 = 11.25A. Therefore, the minimum rating required for the switch is 12A.
The reason for this is that the switch must be able to handle the current that will flow through it when the lamps are turned on. If the switch is not rated for the correct current, it could overheat and fail.
To learn more about ac mains voltage click here : brainly.com/question/30787431
#SPJ11
22g ice at 0 degrees Celsius
+
155g water at 24 degrees Celsius
Final temperature?
(Is this latent heat of fusion of water?)
Combining 22g of ice at 0°C with 155g of water at 24°C results in a final temperature of approximately 0.996°C. There is no involvement of the latent heat of fusion in this calculation.
To determine the final temperature when combining ice and water, we can use the principle of energy conservation:
m₁c₁ΔT₁ + m₂c₂ΔT₂ = 0,
where m₁ and m₂ are the masses of the ice and water, c₁ and c₂ are the specific heat capacities of ice and water, and ΔT₁ and ΔT₂ are the temperature changes.
m₁ = 22 g,
c₁ = 2.09 J/g°C (specific heat capacity of ice),
ΔT₁ = final temperature - 0°C,
m₂ = 155 g,
c₂ = 4.18 J/g°C (specific heat capacity of water),
ΔT₂ = final temperature - 24°C.
Substituting the values into the equation:
22g * 2.09 J/g°C * (final temperature - 0°C) + 155g * 4.18 J/g°C * (final temperature - 24°C) = 0.
Simplifying the equation and solving for the final temperature:
(46.18 J/°C) * (final temperature) - (45.98 J) = 0.
(46.18 J/°C) * (final temperature) = 45.98 J.
final temperature = 45.98 J / 46.18 J/°C.
final temperature ≈ 0.996°C.
Therefore, the final temperature when combining the given ice and water is approximately 0.996°C.
Regarding the latent heat of fusion of water, it is not directly involved in this calculation as there is no phase change occurring. The given ice is already at 0°C, so it doesn't undergo any further change in state.
know more about latent heat of fusion here: brainly.com/question/87248
#SPJ11
write the missing words in each of the following 1. The value of the electric flux ($) will be maximum when the angle between the uniform electric field (E) and the normal to the surface of the area equal to 2. The formula of the work done (W) is: .... 3. The relation between the electric field (E) and the electric potential (V) is ........ 4. If d is the distance between the two plates and A is the area of each plate, the capacitance of a parallel plate capacitor is given by 5. The charge (Q) stored in a capacitor can be given by 6. The product of the resistance of a conductor (R) and the current passing through it (I) is 7. The unit of the magnetic flux density is ...... 8. A region in which many atoms have their magnetic field aligned is called a ........
The value of the electric flux (Φ) will be maximum when the angle between the uniform electric field (E) and the normal to the surface of the area is 0 degrees or when the field lines are perpendicular to the surface.
The formula of the work done (W) is: W = F × d × cosθ, where F is the force applied, d is the displacement, and θ is the angle between the force and displacement vectors.
The relation between the electric field (E) and the electric potential (V) is given by V = E × d, where V is the electric potential, E is the electric field strength, and d is the distance over which the potential is measured.
If d is the distance between the two plates and A is the area of each plate, the capacitance of a parallel plate capacitor is given by C = ε₀ × A / d, where C is the capacitance and ε₀ is the permittivity of free space.
The charge (Q) stored in a capacitor can be given by Q = C × V, where Q is the charge, C is the capacitance, and V is the voltage across the capacitor.
The product of the resistance of a conductor (R) and the current passing through it (I) is given by Ohm's Law: V = I × R, where V is the voltage, I is the current, and R is the resistance.
The unit of the magnetic flux density is Tesla (T). The magnetic flux density represents the strength of a magnetic field.
A region in which many atoms have their magnetic field aligned is called a ferromagnetic region or a magnetic domain. In such regions, the magnetic moments of the atoms are aligned in the same direction, creating a macroscopic magnetic field.
Learn more about electric flux at: brainly.com/question/30409677
#SPJ11
An astronaut who has a mass of 94 kg is in outer space and drifts away from the space station, and with no propulsion they will not be able to get back. They do have a wrench of mass 600 g, which they decide to throw. The wrench accelerates at a rate of 29.5 m/s². Determine the acceleration of the astronaut as they move back towards the space station. Upload a picture of your full solution for this problem. Diagrams are required for full marks. Your Answer: units Answer
An astronaut who has a mass of 94 kg is in outer space and drifts away from the space station, The acceleration of the astronaut as they move back towards the space station is 0.495 m/s².
To solve this problem, we can apply Newton's third law of motion, which states that every action has an equal and opposite reaction.
1. First, we need to determine the initial momentum of the system. The mass of the wrench is 600 grams, which is 0.6 kg, and the given acceleration is 29.5 m/s². Therefore, the initial momentum of the wrench is p_wrench = (0.6 kg) * (29.5 m/s) = 17.7 kg*m/s.
2. According to Newton's third law, the wrench exerts an equal and opposite force on the astronaut. Since there are no other external forces acting on the system, the momentum of the astronaut-wrench system must remain constant.
3. After the wrench is thrown, the astronaut-wrench system will have a momentum of 17.7 kg*m/s in the opposite direction. Therefore, the acceleration of the astronaut is a_astronaut = (-17.7 kg*m/s) / (94 kg) ≈ -0.495 m/s².
Thus, the astronaut accelerates towards the space station with an acceleration of approximately 0.495 m/s².
Learn more about acceleration here: brainly.com/question/30660316
#SPJ11
A body suspended from a dynamometer weighs 20 N, submerged in water 15 N and in another liquid 12 N. Calculate the density of the unknown liquid
The density of the unknown liquid can be calculated by using Archimedes' principle, which states that the buoyant force acting on a submerged object is equal to the weight of the fluid displaced by the object.
In this case, the body has a weight of 20 N in air and weighs 15 N when submerged in water. The difference between these two weights, 20 N - 15 N = 5 N, represents the buoyant force exerted by the water on the body. Similarly, when the body is submerged in the unknown liquid, it weighs 12 N, meaning that the buoyant force exerted by the liquid is 20 N - 12 N = 8 N.
To find the density of the unknown liquid, we can use the formula:
Density of liquid = (Weight in air - Weight in liquid) / (Weight in air - Weight in water)
Plugging in the values, we have:
Density of liquid = (20 N - 12 N) / (20 N - 15 N) = 8 N / 5 N = 1.6 kg/m³.
Therefore, the density of the unknown liquid is 1.6 kg/m³.
Learn more about buoyant force here: brainly.com/question/32138756
#SPJ11
The density of the unknown liquid is approximately 800 kg/m³.
To calculate the density of the unknown liquid, we can use Archimedes' principle, which states that the buoyant force acting on a submerged object is equal to the weight of the fluid displaced by the object. In this case, the body weighs 20 N in air, 15 N in water, and 12 N in the unknown liquid.
The difference in weight between the body in air and in water is equal to the weight of the water displaced. Therefore, the weight of the unknown liquid displaced is the difference between the weight in air and in the unknown liquid, which is 20 N - 12 N = 8 N.
Since the weight of an equal volume of water is 8 N, we can conclude that the density of the unknown liquid is equal to the density of water, which is approximately 1000 kg/m³. Therefore, the density of the unknown liquid is approximately 800 kg/m³.
Learn more about buoyant force here: brainly.com/question/9664557
#SPJ11
3. A stone is dropped into a well. The splash is heard 6 seconds later. How deep is the well? 4. A cop car drives at 30 m/s towards a crime scene with its siren blaring at a frequency of 2000 Hz. At what frequency do people hear the siren as it: (a) approaches the scene? (b) recedes from the scene? 5. If the density of sea water is 1024 kg/m3, what is the total pressure at a depth of 45 m in sea water?
The depth of the well is approximately 29.4 meters. The frequency of the siren as it approaches the scene is approximately 2121 Hz. The frequency of the siren as it recedes from the scene is approximately 2336 Hz. The total pressure at a depth of 45 meters in sea water is approximately 450,432 Pa.
3. To calculate the depth of the well, we use the fact that the time taken for the sound of the stone's splash to reach the top of the well is equal to the time it takes for the stone to fall to the bottom. Given that the time is 6 seconds, we can use the formula s = ut + ½at², where s is the distance (depth of the well), u is the initial velocity (0 m/s since the stone was dropped), a is the acceleration due to gravity (approximately 9.8 m/s²), and t is the time. Solving for s, we find that the depth of the well is approximately 29.4 meters.
4. (a) When the cop car is approaching the scene, the apparent frequency of the siren can be calculated using the formula f_a = f_s (v_sound ± v_observer) / (v_sound ± v_source), where f_s is the frequency of the siren (2000 Hz), v_sound is the speed of sound, v_observer is the speed of the observer relative to the medium (0 m/s since the observer is stationary), and v_source is the speed of the source (siren) relative to the medium (30 m/s). By substituting the given values, we find that the frequency of the siren as it approaches the scene is approximately 2121 Hz.
(b) When the cop car is receding from the scene, we use the same formula with the appropriate signs. Since the observer is still stationary, v_observer remains 0 m/s, but now v_source becomes -30 m/s since the source is moving away. By substituting the values, we find that the frequency of the siren as it recedes from the scene is approximately 2336 Hz.
5. The pressure at a certain depth in a liquid can be calculated using the formula P = ρgh, where P is the pressure, ρ is the density of the liquid (1024 kg/m³ for sea water), g is the acceleration due to gravity (approximately 9.8 m/s²), and h is the depth (45 meters). By substituting the given values, we find that the total pressure at a depth of 45 meters in sea water is approximately 450,432 Pa.
To know more about depth click here:
https://brainly.com/question/31084252
#SPJ11
One reason the Mediterranean diet may be linked to lower risk for heart disease is the inclusion of food sources of omega-3 fatty acids. Omega-3 fatty acids tend to decrease inflammation, lower triglycerides, and reduce blood clotting. all of which could play a role in protecting heart health. On the Spreadsheet Report, examine the column for omega-3 fatty acids (Omega3). What was the leading source of omega-3 fatty acids in this 1-day Mediterranean diet menu?
The leading sources of omega-3 fatty acids in a Mediterranean diet typically include Fatty Fish, Nuts and Seeds, Olive Oil, legumes, and Leafy Green Vegetables.
The Mediterranean diet is a dietary pattern based on the customary eating practices of nations that border the Mediterranean Sea, including Greece, Italy, Spain, and southern France.
Some key features of the Mediterranean diet:
An abundance of Plant-Based Foods.Healthy Fats.Moderate Consumption of Fish and Poultry.Limited Red Meat.Moderate Dairy Consumption.Red Wine in Moderation.Emphasis on Social and Active Lifestyle.The leading sources of omega-3 fatty acids in a Mediterranean diet typically include:
1. Fatty Fish: Fish such as salmon, trout, and tuna are excellent sources of omega-3 fatty acids, particularly EPA (eicosapentaenoic acid) and DHA (docosahexaenoic acid).
2. Nuts and Seeds: Walnuts, flaxseeds, chia seeds, and hemp seeds are rich in alpha-linolenic acid (ALA).
3. Olive Oil: While not a direct source of omega-3 fatty acids, olive oil is a staple in the Mediterranean diet and provides a healthy balance of monounsaturated fats.
4. Legumes: Some legumes, such as soybeans and kidney beans, contain small amounts of omega-3 fatty acids.
5. Leafy Green Vegetables: Leafy greens like spinach and kale contain omega-3 fatty acids, although in smaller amounts compared to other sources.
Thus, fatty fish, nuts and seeds, olive oil, legumes, and leafy green vegetables are leading sources of omega-3 fatty acids.
To know more about Omega-3 fatty acids, click here:
https://brainly.com/question/31068246
#SPJ4
In the figure below, an iron bar sitting on two parallel copper rails, connected to each other by a resistor, is pulled to the right with a constant force of magnitude F app
=1.45 N. The friction between the bar and rails is negligible. The resistance R=8.00Ω, the bar is moving at a constant speed of 2.05 m/s, the distance between the rails is P, and a uniform magnetic field B
is directed into the page. (a) What is the current through the resistor (in A)? +A (b) If the magnitude of the magnetic field is 3.20 T, what is the length ℓ( in m) ? an m (c) What is the rate at which energy is delivered to the resistor (in W)? - W (d) What is the mechanical power dellvered by the applied constant force (in W)? \& W What If? Suppose the magnetic field has an initial value of 3.20 T at time t=0 and increases at a constant rate of 0.500 T/s. The bar starts at an initial position x 0
=0,100 m to the right of the resistor at t=0, and again moves at a constant speed of 2.05 m/s. Derive time-varying expressions for the following quantities. (e) the current through the 8.00Ω resistor R (Use the following as necessary: t. Assume I(t) is in A and t is in s, Do not include units in your answer.) f(t)= (f) the magnitude of the applied force F app
required to keep the bar moving at a constant speed (Use the following as necessary: t .
Assume F app
(t) is in N and t is in s. Do not include units in your answer.) F app
(t)=
In the given scenario, an iron bar is placed on two parallel copper rails connected by a resistor. The bar is pulled to the right with a constant force of 1.45 N, and there is a magnetic field directed into the page.
The resistance is 8.00 Ω, and the bar moves at a constant speed of 2.05 m/s. The goal is to determine the current through the resistor, the length ℓ of the bar, the rate at which energy is delivered to the resistor, and the mechanical power delivered by the applied force. Additionally, if the magnetic field increases at a constant rate, expressions for the current through the resistor and the magnitude of the applied force are derived as functions of time.
(a) To find the current through the resistor, we can use Ohm's law, which states that the current (I) is equal to the voltage (V) divided by the resistance (R). Since the bar is moving at a constant speed, there is no change in voltage, and the current is given by I = V / R. Given the resistance R = 8.00 Ω, we need to determine the voltage. The voltage can be found using the equation V = F_app * P, where F_app is the applied force and P is the distance between the rails. The applied force F_app is given as 1.45 N, and the distance P is not specified in the question. Therefore, we cannot determine the current without knowing the distance between the rails.
(b) The length ℓ of the bar can be calculated using the equation ℓ = v / B, where v is the velocity and B is the magnitude of the magnetic field. Given the velocity v = 2.05 m/s and the magnitude of the magnetic field B = 3.20 T, we can determine the length ℓ = 2.05 m/s / 3.20 T.
(c) The rate at which energy is delivered to the resistor can be calculated using the equation P = I^2 * R, where I is the current and R is the resistance. Since we do not have the current, we cannot determine the rate of energy delivery.
(d) The mechanical power delivered by the applied constant force can be calculated using the equation P = F_app * v, where F_app is the applied force and v is the velocity. Given the applied force F_app = 1.45 N and the velocity v = 2.05 m/s, we can determine the mechanical power P = 1.45 N * 2.05 m/s.
(e) If the magnetic field increases at a constant rate, the current through the resistor can be described by a time-varying expression. However, without the specific details of the rate at which the magnetic field increases, we cannot derive an expression for the current.
(f) Similarly, without the details of how the magnetic field affects the applied force, we cannot derive an expression for the magnitude of the applied force as a function of time.
In conclusion, the current through the resistor, the rate of energy delivery, and the expressions for the current and the applied force as functions of time cannot be determined without additional information provided in the question.
Learn more about magnetic field here: brainly.com/question/14848188
#SPJ11
A cyclist bikes with an average velocity of 20sm for 5 seconds. What is the magnitude of the cyclist's displacement? Your answer should have one significant figure. m
The magnitude of the cyclist's displacement is approximately 100 meters.
The average velocity of the cyclist is given as 20 meters per second (20 m/s) for a duration of 5 seconds. To find the displacement, we can use the formula:
Displacement = Average Velocity × Time Duration
Substituting the given values:
Displacement = 20 m/s × 5 s = 100 meters
Therefore, the magnitude of the cyclist's displacement is approximately 100 meters. This means that, on average, the cyclist travels a distance of 100 meters in the given time period. It's important to note that the magnitude of displacement only considers the total distance traveled, regardless of the direction. In this case, the direction of the displacement is not specified, and we are solely interested in the magnitude.
To learn more about displacement Click Here: brainly.com/question/11934397
#SPJ11
An 8 V battery connected to a wire generates a 5 A current. If the radius of the wire is changed by a factor of 0.5 without changing the battery, what would be the new current flowing through the wire?
A resistor is connected to a battery with negligible internal resistance. If you replace the resistor with one that has 6.4 times the resistance of the first one, by what factor does the power dissipated in the circuit change?
Replacing a wire resistor with another of the same material and length but with 4 times the diameter will have the effect of changing the resistance by what factor?
If the radius of a wire is changed by a factor of 0.5, the current flowing through the wire will decrease by a factor of 4.
If a resistor is replaced with one that has 6.4 times the resistance of the first one, the power dissipated in the circuit will increase by a factor of 4096.
Replacing a wire resistor with another of the same material and length but with 4 times the diameter will have the effect of changing the resistance by a factor of 16.
The current flowing through a wire is inversely proportional to its resistance. So, if the radius of the wire is decreased, the resistance will increase, and the current will decrease.
The power dissipated in a resistor is equal to the square of the current flowing through it, multiplied by the resistance. So, if the resistance of a resistor is increased, the power dissipated in the resistor will increase.
The resistance of a wire is proportional to its length and inversely proportional to its cross-sectional area. So, if the diameter of a wire is increased by 4, the cross-sectional area will increase by 16, and the resistance will decrease by a factor of 16.
Learn more about resistance here:
brainly.com/question/14547003
#SPJ11
A single slit that is 2100 nm wide forms a diffraction pattern when illuminated by monochromatic light of 680-nm wavelength. At an angle of 10° from the central maximum, what is the ratio of the intensity to the intensity of the central maximum? A) Illo = 0.39 B) Illo = 0.47 C) Illo = 0.35 D) Illo = 0.43 E) Illo = 0.51 Single Slit Diffraction a sin = πα = α . mi, (m=1,2,...), I(0) Im (Sina,2, a = masin . Rayleigh's Criterion OR = 1.22 1 = Double Slit Diffraction I(0) = Im (cos? B)(sin a), B = πd sin e. 1 a Diffraction Grating dsin 0 = mi, (m= 0,1,2, ...). =
The ratio of the intensity to the intensity of the central maximum at an angle of 10° from the central maximum in a single slit diffraction pattern is approximately 0.39 (option A).
To calculate this ratio, we can use the formula for the intensity of a single slit diffraction pattern, which is given by I(θ) = I(0) * (sin(α)/α)^2, where I(θ) is the intensity at angle θ, I(0) is the intensity of the central maximum, and α is the angular position relative to the central maximum.
In this case, we are given the width of the slit (2100 nm) and the wavelength of the light (680 nm). Using these values, we can calculate the value of α at an angle of 10° from the central maximum using the formula α = π * w * sin(θ) / λ, where w is the width of the slit and λ is the wavelength of the light.
Plugging in the values, we find that α ≈ 0.303 radians. Substituting this value into the intensity formula, we get I(10°) / I(0) ≈ (sin(0.303) / 0.303)^2 ≈ 0.39, which indicates that the ratio of the intensity at 10° to the intensity of the central maximum is approximately 0.39.
Learn more about diffraction here: brainly.com/question/12290582
#SPJ11
A long solid non-conducting cylinder has charge uniformly distributed throughout it with a volume
charge density rho = 12.0 C/m3. It has a radius of 20.0 cm.
a) What is the electric field at a point 15.0 cm from the center?
b) What is the electric field at a point 30.0 cm from the center?
A) To find the electric field at a point 15.0 cm from the center of the cylinder, we can use Gauss's law. Gauss's law states that the electric field at a point outside a uniformly charged cylindrical surface is proportional to the charge density and inversely proportional to the distance from the center of the cylinder.
Given:
Volume charge density (ρ) = 12.0 C/m^3
Radius of the cylinder (r) = 20.0 cm = 0.20 m
Distance from the center (d) = 15.0 cm = 0.15 m
To calculate the electric field (E), we can use the formula:
E = (ρ * r) / (2 * ε₀ * d)
Where ε₀ is the permittivity of free space (ε₀ ≈ 8.85 x 10^-12 C^2/(N·m^2)).
Substituting the given values into the formula, we have:
E = (12.0 C/m^3 * 0.20 m) / (2 * 8.85 x 10^-12 C^2/(N·m^2) * 0.15 m)
E ≈ 0.135 N/C
Therefore, the electric field at a point 15.0 cm from the center of the cylinder is approximately 0.135 N/C.
b) To find the electric field at a point 30.0 cm from the center of the cylinder, we can use the same formula as above. The only difference is the distance from the center, which is now 30.0 cm = 0.30 m.
Substituting the values into the formula, we have:
E = (12.0 C/m^3 * 0.20 m) / (2 * 8.85 x 10^-12 C^2/(N·m^2) * 0.30 m)
E ≈ 0.090 N/C
Therefore, the electric field at a point 30.0 cm from the center of the cylinder is approximately 0.090 N/C.
To learn more about electric field
brainly.com/question/11482745
#SPJ11
A standing wave on a 2-m stretched string is described by: y(x,t) = 0.1 sin(2tex) cos(50rt), where x and y are in meters and t is in seconds. Determine the shortest distance between a node and an antinode. D = 50 cm O D = 25 cm D = O D = 12.5 cm O D = 16.67 cm O D = 33.34 cm
Given expression of a standing wave on a 2-m stretched string:y(x,t) = 0.1 sin(2tex) cos(50rt)Here, wavelength λ of the wave is given as λ = 2L/n, where n is the number of nodes in the string. The frequency f of the wave is given as f = v/λ, where v is the velocity of the wave, which can be given as v = √(T/μ), where T is the tension in the string and μ is the mass per unit length of the string.Since the wave is described by the expression:y(x,t) = 0.1 sin(2tex) cos(50rt)We can say that the amplitude of the wave, A = 0.1 mHere, the number of nodes (n) of the wave will be 2 (since there are 2 nodes for each half wavelength).Also, the frequency f = 50 HzHence, velocity of the wave,v = √(T/μ) = fλ = 100/λPutting the value of fλ, we get:T/μ = (100/λ)^2T/μ = (100*100)/(2L)²T/μ = 2500/L²We can now find the distance between a node and an antinode by using the formula:d = λ/4Therefore, shortest distance between a node and an antinode is:d = λ/4 = (2L/n)/4 = (2*2)/4 = 1 m = 100 cmTherefore, the correct option is D = 100 cm.
to know more about understanding intake pls visit:
https://brainly.com/question/27497782
#SPJ11
If the headlight of a car radiates at 30 W and the peak wavelength of the emitted light is 540 nm, how many photons per second does this light radiate?
The car's headlight radiates approximately 5.56 x 10^18 photons per second with a power of 30 W and a peak wavelength of 540 nm.
The number of photons per second radiated by the car's headlight can be calculated by dividing the power of the light by the energy of each photon.
Using the equation E = hc/λ, where E is the energy of a photon, h is Planck's constant (6.626 x 10^-34 J·s), c is the speed of light (3.00 x 10^8 m/s), and λ is the wavelength of the light.
In this case, the power of the light is given as 30 W and the peak wavelength is 540 nm.
To calculate the number of photons per second, we divide the power by the energy of each photon. The energy of each photon can be calculated using the equation E = hc/λ.
Plugging in the given values, we have E = (6.626 x 10^-34 J·s)(3.00 x 10^8 m/s)/(540 x 10^-9 m). Solving this equation gives us the energy of each photon. Finally, we divide the power of the light (30 W) by the energy of each photon to determine the number of photons emitted per second.
To learn more about wavelength click here:
brainly.com/question/31322456
#SPJ11
An object is launched with an initial velocity of 26.8 m/s at an angle of 36.4 degrees relative to the +x direction. If it is initially at ground level, at what distance away does it return to the ground?
The object will return to the ground at a horizontal distance of approximately 106.7 meters.
To find the distance at which the object returns to the ground, we need to analyze its projectile motion. The initial velocity can be divided into horizontal and vertical components. The horizontal component is given by Vx = V * cos(θ), where V is the initial velocity (26.8 m/s) and θ is the launch angle (36.4 degrees). The vertical component is given by Vy = V * sin(θ). The time of flight can be determined using the vertical component. The formula for the time of flight is t = (2 * Vy) / g, where g is the acceleration due to gravity (approximately 9.8 m/s²). Plugging in the values, we find t ≈ 5.18 seconds.
The horizontal distance traveled during the time of flight can be calculated using the horizontal component and the time of flight. The formula for horizontal distance is d = Vx * t. Plugging in the values, we find d ≈ 138.5 meters. However, the object returns to the ground at the same height it was initially launched from, so we only need to consider the horizontal distance traveled. Therefore, the object returns to the ground at a horizontal distance of approximately 106.7 meters.
LEARN MORE ABOUT distance here: brainly.com/question/15256256
#SPJ11
A 2.50-kg metallic ball at rest is being pulled by a strange magnetic field of a comet. The force exerted by the comet (in newtons) is given by the function F (r) = -kre-or where: r: Distance from the comet's surface to the metallic ball, in meters. k=8.00 N m 2 a = 2.00 m-1 The metallic ball starts at a distant enough position from the comet such that the force is zero, then starts moving towards the comet. 1. What is the potential function U (r) of the comet? Use the condition U (ro) = lim,-400 U (r) = 0. = 2. What is the metallic ball's speed (in m/s) once the steel ball is one meter above the comet? Justify your answer using your rationale and equations used.
The metallic ball's speed once it is one meter above the comet is approximately 1.34 m/s.
To find the potential function U(r) of the comet, we need to integrate the force function F(r) with respect to r. The potential function U(r) is given by:
U(r) = -∫F(r) dr
Given that F(r) = -k * e^{-ar}, we can integrate this function with respect to r to obtain U(r):
U(r) = ∫[tex]k * e^{-ar} dr[/tex]
To solve this integral, we use the substitution u = -ar, du = -a dr. The integral becomes:
U(r) = -∫(k/a) * e^u du
= -(k/a) * ∫e^u du
= -(k/a) * e^u + C
Now, applying the condition U(ro) = lim(r->-∞) U(r) = 0, we have:
[tex]0 = -(k/a) * e^{-ar} + C[/tex]
Since the metallic ball starts at a distant enough position where the force is zero, we can set C = 0. Therefore, the potential function U(r) of the comet is:
[tex]U(r) = -(k/a) * e^{-ar}[/tex]
Now, to find the metallic ball's speed once it is one meter above the comet, we need to apply the conservation of mechanical energy. The mechanical energy E of the metallic ball is given by the sum of its kinetic energy (KE) and potential energy (PE):
E = KE + PE
When the metallic ball is one meter above the comet's surface, its potential energy is U(1), and its kinetic energy is given by:
[tex]KE = (1/2) * m * v^2[/tex]
where m is the mass of the metallic ball and v is its speed. Since the mechanical energy is conserved, we have:
E = KE + PE = constant
At the distant enough position, the metallic ball is at rest, so its initial kinetic energy is zero. Therefore, at one meter above the comet, we have:
[tex]E = (1/2) * m * v^2 + U(1)[/tex]
Setting E = 0 (as the potential energy at the distant enough position is taken as zero), we can solve for v:
[tex]0 = (1/2) * m * v^2 + U(1)\\v^2 = -2 * U(1) / m[/tex]
Taking the square root of both sides gives us the speed of the metallic ball:
[tex]v = \sqrt{(-2 * U(1) / m)[/tex]
Substituting [tex]U(1) = -(k/a) * e^{-a}[/tex] and the given values of k, a, and m, we can calculate the speed:
[tex]v = \sqrt{(-2 * (8.00 N m^2 / 2.00 m^{-1}) * e^{-2.00 m^{-1}}) / 2.50 kg[/tex]
v ≈ 1.34 m/s
Therefore, the metallic ball's speed once it is one meter above the comet is approximately 1.34 m/s.
Learn more about potential energy here:
https://brainly.com/question/999862
#SPJ11
What is the source of the energy emitted in radioactive decay? O Kinetic energy transferred from collision with a high- speed neutron Conversion of part of the mass of the nucleus to energy O De-excitation of electrons from a meta-stable state O Kinetic energy of heat O Absorbed photon energy O
Radioactive decay is the disintegration of an unstable atomic nucleus that releases energy in the form of ionizing radiation.
Radioactive decay is the term for the spontaneous process by which unstable atomic nuclei change into more stable nuclei while emitting radiation. This process takes place in specific isotopes, referred to as radioactive isotopes, whose nuclei have an excess of either protons or neutrons. Alpha, beta, and gamma decay are three types of radioactive decay, each of which is characterised by the emission of particular particles or electromagnetic radiation. According to exponential decay laws, the rate of decay is inversely correlated with the quantity of radioactive atoms present. Applications for radioactive decay include radiometric dating, nuclear energy production, and medical imaging and treatment.
The energy released during radioactive decay comes from the conversion of part of the mass of the nucleus into energy. Therefore, the correct option is: Conversion of part of the mass of the nucleus to energy.What is radioactive decay?
Radioactive decay is the method by which the nucleus of an unstable atom loses energy by emitting particles of radiation. Some common examples of radioactive decay include the emission of alpha, beta, and gamma radiation.The energy released during the decay process comes from the conversion of part of the mass of the nucleus into energy. This can be calculated using Einstein's famous equation [tex]E = mc^2[/tex], where E represents the energy released, m represents the mass that is lost, and c represents the speed of light.
Learn more about radioactive decay here:
https://brainly.com/question/1770619
#SPJ11
Two objects, with masses mu and me, are originally a distance r apart. The magnitude of the gravitational force between them is E. The masses are changed to 9 m; and 9m2, and the distance is changed to 81r. What is the magnitude of the new gravitational force?
The magnitude of the new gravitational force between the two objects is 81E. The masses are changed to 9 times their original values, while the distance is changed to 81 times its original value.
The magnitude of the gravitational force between two objects is given by the formula F = G * (mu * me) / r^2, where G is the gravitational constant. In the initial scenario, the masses of the objects are mu and me, and the distance between them is r. The magnitude of the gravitational force is E.
When the masses are changed to 9mu and 9me, and the distance is changed to 81r, we can calculate the new magnitude of the gravitational force using the same formula. Plugging in the new values, we get F' = G * (9mu * 9me) / (81r)^2 = 81E.
Therefore, the magnitude of the new gravitational force is 81E.
To know more about gravitational force here: brainly.com/question/32609171
#SPJ11.
Preparing for a turn, a bus slows down with an acceleration of -2.0 m/s^2. Calculate how much time it takes the bus to slow down from 16.0 m/s to 5.0 m/s.
Only enter your numerical answer below - do not include units. Report your answer to 2 decimal places.
The question asks for the time it takes for a bus to decelerate from 16.0 m/s to 5.0 m/s with an acceleration of -2.0 m/s².
To find the time taken, we can use the equation of motion that relates acceleration (a), initial velocity (u), final velocity (v), and time (t): v = u + at.
Given:
Initial velocity (u) = 16.0 m/s (positive because it's in the forward direction)
Final velocity (v) = 5.0 m/s (positive because it's in the forward direction)
Acceleration (a) = -2.0 m/s² (negative because it's in the opposite direction to the initial velocity)
Rearranging the equation, we have:
t = (v - u) / a
Substituting the values, we get:
t = (5.0 - 16.0) / -2.0 = 11.0 / 2.0 = 5.50 seconds.
Therefore, it takes the bus 5.50 seconds to slow down from 16.0 m/s to 5.0 m/s.
To know more about equation of motion here: brainly.com/question/31314651
#SPJ11.
the Moment Generating Function of a Poisson random variable, X, is given as Mx(t) = e¹(e²-1) If Y = 2X, then the Moment Generating Function of Y is ○ My(t) = e²(2e¹-1) ○ My(t) ○ = e²(e¹-1) e²(e²¹-1) My(t) = My(t) = ²(e¹-1)
Previous question
The Moment Generating Function of a Poisson random variable X is Mx(t) = e^(λ(e^t - 1)). If Y = 2X, then the Moment Generating Function of Y is given as My(t) = Mx(2t) = e^(λ(e^(2t) - 1)).
Hence, the correct option is My(t) = e^(λ(e^(2t) - 1)).Given,Moment Generating Function of a Poisson random variable, X, is given as Mx(t) = e^(λ(e^t - 1)).If Y = 2X, then the Moment Generating Function of Y is My(t) = Mx(2t).Thus, we can substitute 2t in the equation of Mx(t).Mx(t) = e^(λ(e^(2t/2) - 1))Mx(t) = e^(λ(e^(t) - 1))Thus, the Moment Generating Function of Y is given as My(t) = e^(λ(e^(2t) - 1)). Therefore, the option My(t) = e²(e²¹-1) is incorrect.
to know more about Moment intake pls visit:
https://brainly.com/question/33194093
#SPJ11
Answer following short questions. [4] 20121 (i) What are the series of processes involved in the communication process? (ii) Why do we need modulation? [2] Q-2 Answer following multiple choice questions (Answer any three). [6] (i) If the modulation index is changed from 0 to 1, the transmitted power: [2] (a) increase by 50% (b) increase by 75% (c) Increase by 100% (d) remains unaffected. (ii) We can obtain PM from frequency modulator by passing the modulation signal through [2] a (a) differentiator (b) integrator (c) buffer (d) none of these
The processes involved in the communication process include encoding, modulation, transmission, reception, demodulation, decoding, and interpretation.
What are the processes involved in the communication process?(i) The series of processes involved in the communication process typically include encoding, modulation, transmission, reception, demodulation, decoding, and interpretation of the received information.
(ii) Modulation is necessary in communication systems to transfer information efficiently and effectively over long distances or through different media.
It allows the encoding of the information onto a carrier signal, enabling it to be transmitted over a communication channel with improved signal quality, reduced interference, and better utilization of bandwidth.
Learn more about communication process
brainly.com/question/29505006
#SPJ11
What does crystal size tell a geologist about the cooling rate of an igneous rock (and therefore the location where it formed)?
The size of a crystal informs a geologist about the cooling rate of an igneous rock and thus the location where it was formed. To get a detailed explanation of this, continue reading below:Explanation:The size of crystals in an igneous rock is linked to the rate of cooling.
Slow cooling allows crystals to develop more fully than rapid cooling. When magma cools slowly, the crystals have time to grow, which typically results in bigger crystals. Alternatively, fast cooling does not provide enough time for crystals to grow, so smaller crystals are formed.
The position where the rock formed is also affected by this.Crystals that are large and well-developed indicate that the rock cooled slowly, allowing for complete growth of the crystals. The place where the rock developed is more likely to be deep below the surface. Large crystals are more common in intrusive igneous rocks since these rocks cool slowly deep below the surface. So, crystal size provides an insight into the cooling rate of an igneous rock and hence the location where it was formed.
To know more about crystal size visit:
brainly.com/question/33181998
#SPJ11
Which of the following heat sources is NOT believed to have significantly influenced the chemical differentiation of early Earth?
A. The sinking of heavy elements such as iron
B. The Sun's rays.
C. Early Earth's compaction
D. The decay of radioactive elements.
The heat source that is NOT believed to have significantly influenced the chemical differentiation of early Earth is The Sun's rays.
option B is correct.
How do we know?The Sun's rays primarily provide light and heat to the Earth's surface, but they do not directly contribute to the internal heat and differentiation processes of the planet.
The Sun's energy is important for sustaining life and driving surface processes like weather and climate, but it does not play a significant role in the chemical differentiation of Earth's interior.
Learn more about Sun's energy at:
https://brainly.com/question/27443183
#SPJ4
Which of the following best describes a closed system?
A system that can exchange neither energy nor matter with its surroundings.
A system that can exchange both energy and matter with its surroundings.
A system that can exchange energy, but does not exchange matter with its surroundings.
A system that can exchange both energy and matter, but not with its surroundings.
The term that best describes a closed system is a system that can exchange neither energy nor matter with its surroundings. A closed system is a type of thermodynamic system that does not exchange matter with its surroundings.
Energy, on the other hand, can still be exchanged in this type of system, but only in a limited sense. Closed systems are often characterized by the fact that they are physically enclosed, which means that no matter can enter or exit the system. that can exchange neither energy nor matter with its surroundings. This is because the defining feature of a closed system is that it cannot exchange matter with its surroundings. Therefore, it is incorrect to say that a closed system can exchange both energy and matter with its surroundings, or that it can exchange energy but not matter with its surroundings.
A closed system is a type of thermodynamic system that does not exchange matter with its surroundings. Energy, on the other hand, can still be exchanged in this type of system, but only in a limited sense. Closed systems are often characterized by the fact that they are physically enclosed, which means that no matter can enter or exit the system. However, energy can still be transferred within the system through various means, such as heat transfer or work done by or on the system. Closed systems are often used in thermodynamics to study energy transfer and conversion within a particular system, and they can be used to model many real-world systems, such as the Earth's atmosphere or a nuclear reactor. To summarize, a closed system is one that cannot exchange either energy or matter with its surroundings.
To know more about thermodynamic Visit;
https://brainly.com/question/32217565
#SPJ11
What must the coefficient of kinetic friction be in order for the box to be dragged across the table with an acceleration of 4 m/s² O 0.2 O 0.7 O 0.1 O 0.5
The coefficient of kinetic friction required for the box to be dragged across the table with an acceleration of 4 m/s² is approximately 0.41. so Option D is correct answer.
To determine the coefficient of kinetic friction required for a box to be dragged across the table with an acceleration of 4 m/s², the coefficient must be calculated. The correct coefficient of kinetic friction can be found by comparing the given acceleration to the equation a = μk * g, where μk is the coefficient of kinetic friction and g is the acceleration due to gravity. The answer can be obtained by finding the coefficient of kinetic friction that satisfies the equation.
The equation for the force of kinetic friction is given by f_k = μk * N, where μk is the coefficient of kinetic friction and N is the normal force. In this case, the force of friction can be written as f_k = m * a, where m is the mass of the box and a is the acceleration. The normal force is equal to the weight of the box, which is given by , where g is the acceleration due to gravity.
Substituting the expressions for the force of friction and the normal force into the equation f_k = μk * N, we have [tex]m * a = k * m * g[/tex]. Canceling out the mass, we get a = μk * g. Rearranging the equation to solve for μk, we have μk = a / g.
Given that the acceleration a is 4 m/s² and the acceleration due to gravity g is approximately 9.8 m/s², we can calculate μk = 4 / 9.8 ≈ 0.41.
Learn more about kinetic friction here
https://brainly.com/question/30886698
#SPJ11
The Complete question is
What must the coefficient of kinetic friction be in order for the box to be dragged across the table with an acceleration of 4 m/s²
A. 0.2
B. 0.7
C. 0.1
D. 0.5
An ice skater spinning with her arms outstretched and then folded is shown below. When arms are outstretched her moment of inertia is 5.0 kg m2 and she spins at 3.0 revolutions per second. If she pulls in her arms moment of inertia reduces to 2.0 kg m2. How fast, in revolution per seconds, will she be spinning when her arms are folded
Answer:
Explanation:
To solve this problem, we can use the principle of conservation of angular momentum. Angular momentum is conserved when no external torques act on the system.
The formula for angular momentum is given by:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
Given:
I_outstretched = 5.0 kg m^2 (moment of inertia with arms outstretched)
ω_outstretched = 3.0 revolutions per second (angular velocity with arms outstretched)
I_folded = 2.0 kg m^2 (moment of inertia with arms folded)
To find the angular velocity when her arms are folded (ω_folded), we can equate the angular momentum before and after folding:
L_outstretched = L_folded
I_outstretched * ω_outstretched = I_folded * ω_folded
Substituting the given values:
5.0 kg m^2 * 3.0 revolutions per second = 2.0 kg m^2 * ω_folded
Simplifying the equation:
15 revolutions per second = 2.0 kg m^2 * ω_folded
Solving for ω_folded:
ω_folded = 15 revolutions per second / 2.0 kg m^2
ω_folded = 7.5 revolutions per second
Therefore, when the ice skater folds her arms, she will be spinning at a rate of 7.5 revolutions per second.
know more about angular momentum: brainly.com/question/30656024
#SPJ11
After passing a bone tissue with thickness 20 mm, the intensity of X-ray radiation was reduced by a factor of 5. Find linear and mass attenuation coefficients for the bone tissue having density p = 1.6 103 kg/m3.
The mass attenuation coefficient for the bone tissue is approximately 3.6131 * 10^-4 m^2/kg.
To find the linear attenuation coefficient and the mass attenuation coefficient for the bone tissue, we can use the following formula:
I = I₀ * e^(-μmρ)
where:
I₀ is the initial intensity of the X-ray radiation,
I is the intensity after passing through the bone tissue,
μ is the linear attenuation coefficient,
m is the thickness of the bone tissue, and
ρ is the density of the bone tissue.
Given:
Thickness of the bone tissue, m = 20 mm = 0.02 m
Intensity reduction factor, I/I₀ = 1/5 (intensity is reduced by a factor of 5)
Density of the bone tissue, ρ = 1.6 * 10^3 kg/m^3
We need to solve for the linear attenuation coefficient (μ).
Taking the natural logarithm of both sides of the equation, we have:
ln(I/I₀) = -μmρ
Solving for μ, we get:
μ = -ln(I/I₀) / (mρ)
Now we can substitute the given values and calculate μ.
μ = -ln(1/5) / (0.02 * 1.6 * 10^3)
Calculating the value using a calculator:
μ ≈ 0.5781 m^-1
The linear attenuation coefficient for the bone tissue is approximately 0.5781 m^-1.
To find the mass attenuation coefficient (μm), we can divide the linear attenuation coefficient (μ) by the density (ρ).
μm = μ / ρ
Substituting the given values:
μm = 0.5781 / (1.6 * 10^3)
Calculating the value:
μm ≈ 3.6131 * 10^-4 m^2/kg
Learn more about linear and mass attenuation coefficient:
https://brainly.com/question/32779172
#SPJ11
A wheel is rotating in the clockwise direction and is slowing down. What are the signs of ω and α?
A.
w is positive, α is positive
B.
w is positive, α is negative
C.
w is negative, α is negative
D.
w is negative, α is positive
An object is moving in a circular path in the clockwise direction and is speeding up. What can be said about the acceleration of the object.
A.
It's centripetal acceleration is increasing with time.
B.
It's tangental acceleration is increasing with time.
C.
The magnitude of the tangential and centripetal accelerations must be equal.
D.
Its tangential acceleration is constant but non-zero
For a wheel rotating in the clockwise direction and slowing down, the angular velocity (ω) is positive because it is rotating in the clockwise direction. However, the angular acceleration (α) is negative because it is slowing down, meaning the magnitude of ω is decreasing.
So the correct answer is B. ω is positive and α is negative.
For an object moving in a circular path in the clockwise direction and speeding up, the acceleration of the object consists of two components: centripetal acceleration and tangential acceleration.
Centripetal acceleration is the acceleration towards the center of the circle, and tangential acceleration is the acceleration along the tangent to the circle.
Since the object is speeding up, both the centripetal and tangential accelerations must be present. However, the statement does not provide any information about the relationship between the magnitudes of these accelerations. Therefore, we cannot conclude that the magnitude of the tangential and centripetal accelerations must be equal.
So the correct answer is D. Its tangential acceleration is non-zero and may be constant or changing.
To learn more about magnitude : brainly.com/question/31022175
#SPJ11
A pipe discharges storm water into a creek. Water flows horizontally out of the pipe at 2.1 m/s, and the end of the pipe is 1.5 m above the creek. How far out from the end of the pipe is the point where the stream of water meets the creek? Note: Your answer is assumed to be reduced to the highest power possible. Your Answer: x10 Answer units What is the frequency of a radio signal that has a wavelength of 3.0 km? Note: Your answer is assumed to be reduced to the highest power possible. Your Answer: x10 Answer units Question 8 (5 points) Listen A fireman of mass 80 kg slides down a pole. When he reaches the bottom, which is 5.2 m below his starting point, his speed is 4.1 m/s. How much did his thermal energy increase?
The fireman's thermal energy increased by 134,080 J.
To determine the increase in the fireman's thermal energy, we can use the principle of conservation of energy. Initially, the fireman has gravitational potential energy due to his position at the top of the pole, and at the bottom, he has both kinetic energy and thermal energy.
First, we calculate the change in potential energy. The gravitational potential energy is given by PE = mgh, where m is the mass of the fireman, g is the acceleration due to gravity, and h is the height difference.
Using the given values, m = 80 kg, g = 9.8 m/s², and h = 5.2 m, we can calculate the change in potential energy ΔPE.
Next, we calculate the kinetic energy at the bottom of the pole. The kinetic energy is given by KE = 0.5mv², where v is the speed of the fireman.
Using the given value, v = 4.1 m/s, we can calculate the kinetic energy KE.
The increase in thermal energy is equal to the difference between the change in potential energy and the kinetic energy, ΔEthermal = ΔPE - KE.
By substituting the calculated values, we find that the fireman's thermal energy increased by 134,080 J.
Therefore, the thermal energy increased by 134,080 J.
To learn more about kinetic energy click here
brainly.com/question/999862
#SPJ11
