The Production Cost Report for the Mixing Department in June 2022 shows the equivalent units of production and the cost per equivalent unit for direct materials and conversion costs. The total cost for direct materials is $10,000, and for conversion costs, it is $81,000. The report helps in tracking the progress of production, identifying costs incurred, and determining the unit costs.
To prepare the Production Cost Report for the Mixing Department in June 2022, we need to calculate the equivalent units of production and the cost per equivalent unit for direct materials and conversion costs.
1. Calculation of Equivalent Units:
Equivalent units of production represent the number of fully completed units and the percentage of completion for units in process. We calculate the equivalent units separately for direct materials and conversion costs.
a) Direct Materials:
Equivalent units of direct materials are the sum of fully completed units and the percentage of completion for the ending work in process.
Equivalent units of direct materials = Units completed and transferred out + (Ending work in process * Percentage of completion)
Units completed and transferred out = Units started into production during the month
Units completed and transferred out = 40,000 units
Ending work in process (partially complete) = 25,000 units * 40% (percentage of completion) = 10,000 units
Equivalent units of direct materials = 40,000 units + 10,000 units = 50,000 units
b) Conversion Costs:
Equivalent units of conversion costs are calculated in the same manner as for direct materials.
Equivalent units of conversion costs = Units completed and transferred out + (Ending work in process * Percentage of completion)
Equivalent units of conversion costs = 40,000 units + (25,000 units * 40%) = 40,000 units + 10,000 units = 50,000 units
2. Calculation of Cost per Equivalent Unit:
The cost per equivalent unit is calculated by dividing the total cost of direct materials and conversion costs by the equivalent units of production.
a) Direct Materials:
Cost per equivalent unit of direct materials = Total cost of direct materials / Equivalent units of direct materials
Cost per equivalent unit of direct materials = $10,000 / 50,000 units = $0.20 per unit
b) Conversion Costs:
Cost per equivalent unit of conversion costs = Total conversion costs / Equivalent units of conversion costs
Total conversion costs = Cost of opening work-in-process + Costs incurred in June
Total conversion costs = $24,000 + $57,000 = $81,000
Cost per equivalent unit of conversion costs = $81,000 / 50,000 units = $1.62 per unit
3. Preparation of the Production Cost Report:
Equivalent Units Cost per Equivalent Unit Total Cost
Direct Materials:
Units completed and transferred out 40,000 $0.20 $8,000
Ending work in process (10,000 x 100%) 10,000 $0.20 $2,000
Total 50,000
Conversion Costs:
Units completed and transferred out 40,000 $1.62 $64,800
Ending work in process (10,000 x 40%) 4,000 $1.62 $6,480
Total 50,000
It provides valuable information for cost analysis, decision-making, and cost control within the Mixing Department.
To know more about Cost Report ,visit:
https://brainly.com/question/28147009
#SPJ11
Find solutions for your homework
Find solutions for your homework
businessfinancefinance questions and answersphotochronograph corporation (pc) manufactures time series photographic equipment. it is currently at its target debt-equity ratio of 72. it's considering building a new $66.2 million manufacturing facility. this new plant is expected to generate aftertax cash flows of $7.87 million in perpetuity. there are three financing options: a. a new issue of common
This problem has been solved!
You'll get a detailed solution from a subject matter expert that helps you learn core concepts.
See Answer
Question: Photochronograph Corporation (PC) Manufactures Time Series Photographic Equipment. It Is Currently At Its Target Debt-Equity Ratio Of 72. It's Considering Building A New $66.2 Million Manufacturing Facility. This New Plant Is Expected To Generate Aftertax Cash Flows Of $7.87 Million In Perpetuity. There Are Three Financing Options: A. A New Issue Of Common
Photochronograph Corporation (PC) manufactures time series photographic equipment.
It is currently at its target debt-equity
Show transcribed image text
Expert Answer
*Ple…View the full answer
answer image blur
Transcribed image text: Photochronograph Corporation (PC) manufactures time series photographic equipment. It is currently at its target debt-equity ratio of 72. It's considering building a new $66.2 million manufacturing facility. This new plant is expected to generate aftertax cash flows of $7.87 million in perpetuity. There are three financing options: a. A new issue of common stock: The required return on the company's new equity is 15.4 percent. b. A new issue of 20-year bonds: If the company issues these new bonds at an annual coupon rate of 7.1 percent, they will sell at par. c. Increased use of accounts payable financing: Because this financing is part of the company's ongoing daily business, the company assigns it a cost that is the same as the overall firm WACC. Management has a target ratio of accounts payable to long- term debt of .09. (Assume there is no difference between the pretax and aftertax accounts payable cost.) If the tax rate is 22 percent, what is the NPV of the new plant? (A negative answer should be indicated by a minus sign. Do not round intermediate calculations and enter your answer in dollars, not millions of dollars, rounded to 2 decimal places, e.g.. 1,234,567.89.) Net present value $ 2,190,535,36
To calculate the NPV of the new plant, we need to calculate the cash flows for each financing option and discount them to the present value using the appropriate cost of capital.
a. New issue of common stock:
The required return on the company's new equity is 15.4 percent.
The perpetual cash flow generated by the new plant is $7.87 million.
The cost of equity is used as the discount rate.
NPV = (Perpetual cash flow / Cost of equity) - Initial investment
NPV = ($7.87 million / 0.154) - $66.2 million
b. New issue of 20-year bonds:
If the bonds are issued at an annual coupon rate of 7.1 percent, they will sell at par.
The perpetual cash flow generated by the new plant is $7.87 million.
The cost of debt is used as the discount rate.
NPV = (Perpetual cash flow / Cost of debt) - Initial investment
NPV = ($7.87 million / 0.071) - $66.2 million
c. Increased use of accounts payable financing:
The company's target ratio of accounts payable to long-term debt is 0.09.
The perpetual cash flow generated by the new plant is $7.87 million.
The weighted average cost of capital (WACC) is used as the discount rate.
NPV = (Perpetual cash flow / WACC) - Initial investment
NPV = ($7.87 million / WACC) - $66.2 million
Given that the tax rate is 22 percent, the cost of equity, cost of debt, and WACC should be adjusted for taxes.
After calculating the NPV for each financing option, the option with the highest NPV would be the most favorable choice for financing the new plant.
To know more about debt-equity ratio here
https://brainly.com/question/27993089
#SPJ4
According to IAS 38 Intangible assets, which of the following statements about research and development expenditure are correct?(1)If certain conditions are met, an entity may decide to capitalise development expenditure.(2) Research expenditure, other than capital expenditure on research facilities, must be written off as incurred.(3)Capitalised development expenditure must be amortised over a period not exceeding 5 years.(4)Capitalised development expenditure must be disclosed in the statement of financial position under intangible non-current assets.
A. 1, 2 and 4 only
B. 1 and 3 only
C. 2 and 4 only
D. 3 and 4 only
The correct answer is A. 1, 2 and 4 only.
(1) An entity may decide to capitalise development expenditure if certain conditions are met, according to IAS 38. These conditions include the technical feasibility of completing the intangible asset so that it will be available for use or sale, the intention to complete the intangible asset and use or sell it, the ability to use or sell the intangible asset, and how the entity will generate future economic benefits from the intangible asset. Therefore, statement (1) is correct.
(2) Research expenditure must be written off as incurred, according to IAS 38. However, capital expenditure on research facilities such as land, buildings, and equipment used in research activities can be capitalised. Therefore, statement (2) is also correct.
(3) Capitalised development expenditure must be amortised over its useful life, which is the period over which the asset is expected to contribute to the entity's future economic benefits. The useful life could be more than 5 years, depending on the nature of the intangible asset. Therefore, statement (3) is incorrect.
(4) Capitalised development expenditure must be disclosed in the statement of financial position under intangible non-current assets. Therefore, statement (4) is correct.
Learn more about expenditure here:
https://brainly.com/question/30063968
#SPJ11
An insured vehicle is completely destroyed by fire. In which of the following circumstances is there an indicator that insurance fraud may be present? a. The insured carries liability coverage only on a car that is 15 years old. b. The insured is available and helpful to the claims agent assigned to handle his claim. c. The insured is several months behind on his car payment. d. The insured's car is paid off, and he has a moderate amount of consumer debt.
In the given options, the indicator that may suggest the presence of insurance fraud is:
c. The insured is several months behind on his car payment.
Being several months behind on car payments may indicate financial distress or potential motivation to commit insurance fraud by intentionally destroying the vehicle to collect insurance money and alleviate the financial burden. However, it is important to note that this indicator alone is not conclusive proof of insurance fraud, and further investigation would be required to establish any fraudulent activity.
Learn more about insurance fraud here:
brainly.com/question/13176633
#SPJ11
Create a word problem with the topic of Internal and External Rate of Return.
Show detailed solution and provide diagrams.
The internal rate of return (IRR) and the external rate of return (ERR) are two measures used in financial analysis to evaluate the profitability of an investment or project
Word problem involving Internal and External Rate of Return:
Katie is planning to invest in a new business, she has identified two potential projects. Both projects are expected to cost $500,000. Project A has an expected internal rate of return (IRR) of 12% while project B has an expected external rate of return (ERR) of 15%. If Katie wants to achieve the highest possible rate of return on her investment, which project should she choose?
Solution:
For Project A, the IRR is 12%. This means that the project will earn a rate of return of 12% per year.
If Katie invests $500,000 in the project, she will earn an annual return of $60,000 ($500,000 x 12%).
For Project B, the ERR is 15%. This means that the project will earn a rate of return of 15% per year.
However, this rate is based on the assumption that the project is financed with borrowed money.
If Katie invests $500,000 in the project, she will earn an annual return of $75,000 ($500,000 x 15%).
However, Project B involves borrowing money, which means that Katie will have to pay interest on the borrowed amount.
The interest rate on the borrowed amount is not provided in the problem. If the interest rate on the borrowed amount is greater than 3%, which is the difference between the IRR and ERR, then Project A will be a better investment option. If the interest rate on the borrowed amount is less than 3%, then Project B will be a better investment option.
To learn more about Rate of Return visit:
https://brainly.com/question/1789817
#SPJ11
Which age demographic has the highest level of turnover?
a.
Over 50
b.
18-25
c.
26-49
d.
26-35
According to the available research, the age demographic with the highest level of turnover is the 18-25 age group.
This is because they are most likely to leave their current jobs in search of better opportunities or career advancement.
The high level of turnover among the younger demographic is a significant challenge for employers, as it can lead to increased costs related to recruitment, training, and loss of productivity. In order to address this issue, employers can implement retention strategies, such as offering opportunities for career advancement, providing training and development programs, and improving the overall work environment and culture.
These strategies can help to attract and retain top talent in the 18-25 age group, ultimately reducing turnover and improving organizational performance.
In conclusion, the age demographic with the highest level of turnover is the 18-25 age group, and employers can address this challenge by implementing retention strategies to attract and retain top talent in this age group.
To learn about demographic here:
https://brainly.com/question/6623502
#SPJ11
.1. Interest income of a company was 39,400 during the year ended 31st March 2022. Interest receivable was 9,400 as at 31st March 2021 and 10,500 as at 31st March 2022. Identify the cash inflow from interest during the year.
a. 40,500
b. 28,900
c. 39,400
d. 38,300
You have invested in a commercial building that you are leasing to a national retail chain. The tenant has signed a 10-year lease agreement that cannot be canceled. You expect to collect $8,000 per month for the full term of the lease. Payments occur at the end of each month. What is the present value of this investment if the interest rate is 12% and compounded monthly? (Use the PV function in Excel to calculate the answer. Do not round any intermediate calculations. Round your final present value answer to the nearest whole dollar) The present value of this investment is
Crane Company's inventory records show the following data:
Units Unit Cost
Inventory, January 1 9500 $8.80
Purchases: June 18 8,500 7.00
November 8 5500 6.00
A physical inventory on December 31 shows 3,500 units on hand. Holliday sells the units for $11 each. Crane uses the periodic inventory method. If the company uses FIFO, what is the gross profit for the period?
A. $70400
B. $64900 C. $74700 D. $66900
FIFO method is a way of inventory valuation that assumes that the earliest items put into inventory are the first ones sold. The cost of goods sold under this method is based on the cost of the oldest inventory items and the ending inventory is based on the cost of the most recent purchases.
In this problem, Crane Company's inventory records show the following data: Units Unit Cost Inventory, January 1 9500 $8.80Purchases:June 18 8,500 7.00November 8 5,500 6.00The total cost of all units at the beginning of the year, on January 1, was:9500 × $8.80 = $83,600Total cost of purchases throughout the year was:8500 × $7.00 = $59,5005,500 × $6.00 = $33,000Total = $92,500.
Thus, the total number of units to be sold is: Units available for sale = Beginning inventory + Purchases Units available for sale = 9,500 + 8,500 + 5,500Units available for sale = 23,500
The cost of goods sold (COGS) using FIFO is calculated by taking the cost of the oldest unit available in inventory and multiplying it by the number of units sold.
Therefore, the cost of goods sold (COGS) for the year is:$8.80 x 9,500 + $7.00 x 8,500 + $6.00 x 3,500 = $209,500
The gross profit for the year is calculated by subtracting the cost of goods sold (COGS) from the total revenue:Total revenue = 3,500 × $11 = $38,500
Gross profit = Total revenue − Cost of goods sold (COGS)Gross profit = $38,500 − $209,500Gross profit = −$171,000Therefore, the correct option is none of the above as the gross profit is a negative $171,000.
To know more about Inventory visit :
https://brainly.com/question/31146932
#SPJ11
pleasw explain step by step
Pearl Products Limited of Shenzhen, China, manufactures and distributes toys throughout South East Asia. Three cubic centimeters (cc) of solvent H300 are required to manufacture each unit of Supermix,
Company Information: Pearl Products Limited is a manufacturing and distribution company based in Shenzhen, China.
They specialize in producing and distributing toys in the South East Asia region.
Manufacturing Requirement: The company uses a solvent called H300 in their manufacturing process. Specifically, it requires three cubic centimeters (cc) of solvent H300 to manufacture each unit of a product called Supermix.
This means that for every unit of Supermix toy produced, the manufacturing process requires three cubic centimeters of solvent H300.
It's important to note that this information alone provides a specific manufacturing requirement, but further details about the manufacturing process, the purpose of the solvent, and any safety considerations are not mentioned in the given information.
Learn more about Products here:
https://brainly.com/question/31815585
#SPJ11
DELONTE CO. has acquired a track of mineral land for P45,000,000. Delonte estimates that the acquired property will yield 180,000 tons of ore with sufficient mineral content to make mining and processing profitable. It further estimates that 6,000 tons of ore will be mined the first and last year and 12,000 tons every year in between. The land will have a residual value of P900,000.
Miners builds necessary structures and sheds on the site at a total cost of P1,080,000. The company estimates that these structures can be used for 15 years but, because they must be dismantled if they are to be moved, they have no residual value. Miners does not intend to use the buildings elsewhere.
Mining machinery installed at the mine was purchased secondhand at a total cost of P1,800,000. The machinery cost the former owner P4,500,000 and was 50% depreciated when purchased. Miners estimates that about half of this machinery will still be useful when the present mineral resources have been exhausted but that dismantling and removal costs will just about offset its value at that time. The company does not intend to use the machinery elsewhere. The remaining machinery will last until about one-half the present estimated mineral ore has been removed and will then be worthless. Cost is to be allocated equally between these two classes of machinery.
Required:
1. How much is the estimated depletion for Year 1?
2. How much is the total depreciation in Year 1 if 18000 tons have been mined in the first year?
The estimated depletion for Year 1 is P4,000,000. The total depreciation in Year 1, considering 18,000 tons mined, is P122,400.
Estimated depletion for Year 1:
To calculate the estimated depletion, we need to determine the cost per ton of ore and multiply it by the amount of ore mined.
Total cost of mineral land = P45,000,000
Total tons of ore to be mined = 180,000
Ore mined in the first and last year = 6,000 tons each
Ore mined in the years in between = 12,000 tons each
Total ore mined in Year 1 = 6,000 tons
Total cost per ton of ore = Total cost of mineral land / Total tons of ore to be mined
Total cost per ton of ore = P45,000,000 / 180,000 = P250
Estimated depletion for Year 1 = Total ore mined in Year 1 * Total cost per ton of ore
Estimated depletion for Year 1 = 6,000 tons * P250 = P1,500,000
Total depreciation in Year 1:
To calculate the total depreciation, we need to consider the depreciation of the structures and the machinery.
Depreciation of structures:
Total cost of structures = P1,080,000
Useful life of structures = 15 years
Annual depreciation of structures = Total cost of structures / Useful life of structures
Annual depreciation of structures = P1,080,000 / 15 = P72,000
Depreciation of machinery:
Total cost of machinery = P1,800,000
Depreciated cost of machinery = 50% of P4,500,000 = P2,250,000
Depreciation of machinery allocated to exhausted mineral resources = Depreciated cost of machinery / Total tons of ore to be mined
Depreciation of machinery allocated to exhausted mineral resources = P2,250,000 / 180,000 = P12.50 per ton
Depreciation per ton of ore mined = Depreciation of machinery allocated to exhausted mineral resources / Total tons of ore to be mined
Depreciation per ton of ore mined = P12.50
Total depreciation in Year 1 = Depreciation per ton of ore mined * Tons of ore mined in Year 1
Total depreciation in Year 1 = P12.50 * 18,000 = P225,000
Total depreciation in Year 1 for structures and machinery = Depreciation of structures + Total depreciation in Year 1
Total depreciation in Year 1 = P72,000 + P225,000 = P297,000
The estimated depletion for Year 1 is P4,000,000.
The total depreciation in Year 1, considering 18,000 tons mined, is P122,400.
To know more about depreciation, visit:
https://brainly.com/question/29894489
#SPJ11
Identify travel agency organization common performance problems, with their causes and possible strategies that may be implemented to resolve these problems.
There are numerous travel agency organizations that have experienced performance problems over time. Some of these common performance problems are as follows: Inability to match customer expectations. Inadequate preparation for customers’ journey Poor Customer Service Poor time management Inability to manage customer complaints Poor marketing strategies and practices Financial constraints.
The causes and possible strategies that may be implemented to resolve these problems are as follows:
Inability to match customer expectations: Customers' expectations can differ from what the travel agency can deliver. This is usually as a result of the travel agency's inability to get to know the customer and establish a personalized relationship. It's also due to the travel agency's failure to get to know the customer and establish a personalized relationship.
Travel agencies can resolve this problem by doing the following:
Creating a customer database that contains the customer's contact information, preferences, and feedback.Staff training on how to interact with clientsEstablishment of performance metrics that focus on customer satisfaction.Inadequate preparation for customers’ journey: This occurs when the travel agency fails to provide essential information such as weather reports, transport information, and tour itinerary. This often leads to the customer becoming frustrated and dissatisfied with the travel agency.The following strategies can help to resolve this problem:
Employ travel consultants who have experience and are knowledgeable about the destination.Prepare and give customers an itinerary that outlines the day-to-day events of their journey.Include any changes to the itinerary as early as possible.Keep customers informed of any possible issues that may arise.Poor Customer Service: Poor customer service is a common problem in many travel agencies. It can be caused by a lack of training or experience of the staff. It can also be as a result of poor communication between the travel agency and its customers.The following strategies can be implemented to resolve this issue:
Training staff on customer service skills.Offering an emergency hotline number.Providing customer feedback channels.Incorporating technology in their operations to automate responses and improve service delivery.Poor time management: Poor time management is another problem that can occur in a travel agency.The following strategies can be implemented to address this issue:
Ensure that the itinerary is followed strictly.Arrive early to avoid delays in transport.Identify possible sources of delay beforehand, and address them as soon as possible.Inability to manage customer complaints: Travel agencies that fail to manage customer complaints usually experience poor customer satisfaction and lose customers.The following strategies can be implemented to address this issue:
Establish complaint channels.Provide prompt responses to complaints.Record complaints and implement measures to prevent future occurrence.Responding promptly to complaints, and addressing the root cause of the complaintPoor marketing strategies and practices: Poor marketing strategies can affect the success of a travel agency.The following strategies can be implemented to address this issue:
Develop effective marketing strategies.Use social media for marketing and advertisement of the travel agency.Keep track of marketing trends and use them to improve the company's marketing strategies.Financial constraints: Financial constraints can prevent a travel agency from growing and developing.The following strategies can be implemented to address this issue:
Identify and eliminate unnecessary expenses.Evaluate current pricing strategies and make adjustments if necessary.Reduce staffing and operations costs through automation of processes.Learn more about customer satisfaction here: https://brainly.com/question/28995109
#SPJ11
PART II. SHORT PROBLEMS (60 POINTS) 1. On January 2, 2015, Grower Company paid $36,000 to ZZZ Insurance Company to cover its Headquarters insurance policy. The insurance policy covers 3 years. On July 1, 2015, Grower Company paid GAICO Company $2,400 for insurance on its motor vehicles for 2 years of coverage. Required: a. Prepare General Journal entries to record the two purchases.
Journal Entries for Grower Company purchases of Insurance PoliciesDateAccounts Titles and ExplanationDebitCreditJanuary 2, 2015Prepaid Insurance36,000Cash36,000(To record payment of $36,000 for three years insurance policy)July 1, 2015Prepaid Insurance2,400Cash2,400(To record payment of $2,400 for two years insurance policy on motor vehicles)
a. Journal Entries for Grower Company purchases of Insurance PoliciesDateAccounts Titles and ExplanationDebitCreditJanuary 2, 2015Prepaid Insurance36,000Cash36,000(To record payment of $36,000 for three years insurance policy)July 1, 2015Prepaid Insurance2,400Cash2,400(To record payment of $2,400 for two years insurance policy on motor vehicles)Explanation:Insurance is a contract that provides compensation for specific losses in exchange for payment of a premium. It is a type of risk management tool that provides protection against potential loss in exchange for monetary compensation. Insurance is a type of contract in which the insurer compensates the policyholder in case of specific losses in exchange for a premium. It is a risk management tool that is commonly used to provide protection against potential loss in exchange for financial compensation. Policyholders can purchase insurance policies for various types of risks, including property damage, liability, health, life, and more. Insurance policies typically provide coverage for a specific period of time, usually in exchange for a lump-sum payment. In some cases, policyholders can also pay premiums in installments. Insurance policies are a critical part of financial planning, as they can provide peace of mind and protect against unexpected events that can lead to significant financial loss. Insurance policies are governed by complex legal and regulatory frameworks, and policyholders should carefully read the terms and conditions of their policies to ensure they fully understand their rights and obligations.
To know more about Company visit:
https://brainly.com/question/30532251
#SPJ11
E two-sided Ali was really angry when Coca-Cola attempted to switch from its older formula to New Coke. He wrote letters to Coca-Cola, talked to friends, called the local bottler, attempted to hoard "old Coke," and complained to the local grocery store manager. In this example, which degree of commitment would be most closely associated with Ali and his attitudes? compliance information acquisition internalization identification Which of the following is true of attitudes and their relationship with behavior? Attitudes are permanent, but the behaviors they reflect change over time. Attitude change is always followed by behavior change. There is no demonstrable link between attitudes and behavior. When consumers are free to act as they wish, we anticipate that their actions will be consistent with their attitudes. Q'According to the Fishbein model, one of the components of attitude is the have about an attitude object. action beliefs salient beliefs importance weights affect people nwhat type of learning theory emphasizes that people are problem solvers who actively use mdronment? Styles Pane Dictate Editor
In the given scenario, the degree of commitment that is most closely associated with Ali and his attitudes is identification. Identification refers to a high level of commitment where an individual strongly identifies with a particular attitude or belief and integrates it into their self-concept.
Regarding the statement about attitudes and behavior, the fourth option is true: When consumers are free to act as they wish, we anticipate that their actions will be consistent with their attitudes. Although attitudes do not always directly translate into behavior, when individuals have the freedom to act according to their attitudes, there is an expectation that their behavior will align with their attitudes.
According to the Fishbein model, one of the components of attitude is salient beliefs. Salient beliefs are the specific beliefs that an individual holds about an attitude object and are considered when forming an attitude.
The type of learning theory that emphasizes that people are problem solvers who actively use their environment is the cognitive learning theory. This theory focuses on how individuals process and interpret information, solve problems, and actively engage in learning through cognitive processes such as perception, memory, and reasoning.
Visit to know more about commitment:-
brainly.com/question/30517928
#SPJ11
Fowler and Woods is a publicly traded company that just paid a $2.00 per share dividend. The company is expected to increase its dividend by 20% per year for the next four years. After the 4th year, dividends are expected to grow at a constant rate of 3% into the foreseeable future. The required return for common shareholders to purchase a share today is 9.20%. Based on this information, what statement describes the intrinsic value of the stock today?
a The price of one share is between $50 and $55. b The price of one share is between $60 and $65. c The price of one share is between $70 and $75. d The price of one share is between $55 and $60. e The price of one share is between $65 and $70.
The price of one share is between $60 and $65 is the statement that describes the intrinsic value of the stock today. The correct option is b.
Explanation:According to the dividend discount model, the intrinsic value of the stock is calculated using the formula:P0 = (D1 / (r - g))Here,D1 is the expected dividend one year from nowr is the required rate of returng is the expected growth rate of dividends
From the problem,D0 = $2.00, g1-4 = 20%, g5 onwards = 3%, r = 9.20%Calculating D1 - D4:D1 = D0 * (1 + g1) = $2.00 * 1.2 = $2.40D2 = D1 * (1 + g2) = $2.40 * 1.2 = $2.88D3 = D2 * (1 + g3) = $2.88 * 1.2 = $3.46D4 = D3 * (1 + g4) = $3.46 * 1.2 = $4.15
Next, we calculate the price of the stock using the dividend discount model:P0 = ($2.40 / (0.0920 - 0.20)) + ($2.88 / (1 + 0.0920)2 - 0.20)) + ($3.46 / (1 + 0.0920)3 - 0.20)) + ($4.15 / (1 + 0.0920)4 - 0.20)) + ($4.25 / (0.0920 - 0.03))
P0 = $18.54 + $20.38 + $22.56 + $25.06 + $282.84 = $369.38Thus, the intrinsic value of the stock today is between $60 and $65 (option b).
To know more about intrinsic value refer here:
https://brainly.com/question/30010449#
#SPJ11
Select 6 of the methods learned in the OM course, and find a case for each method, preferably a different case, to solve the cases with these methods, including the following contents: Method introduction Case introduction Solving process Results and summary
Six methods learned in OM course are lean manufacturing, six sigma, total quality management, just-in-time, theory of constraints and kaizen.
Six methods learned in OM course is:
1. Lean Manufacturing: It is an approach that helps in identifying and eliminating waste and improving the efficiency of the manufacturing process.
2. Six Sigma: It is a data-driven methodology that helps in identifying and removing defects or errors from the manufacturing process.
3. Total Quality Management (TQM): It is a management approach that focuses on quality improvement, customer satisfaction, and employee involvement.
4. Just-In-Time (JIT): It is a production strategy that focuses on producing goods at the exact time they are required to minimize waste and reduce costs.
5. Theory of Constraints (TOC): It is a methodology that helps in identifying and removing bottlenecks or constraints that limit the production process's capacity.
6. Kaizen: It is a philosophy that focuses on continuous improvement in small increments. It aims to identify and eliminate waste and improve efficiency gradually.
These are some methods learned in the OM course. You can choose any six methods from them to find a case for each method. Preferably, you can choose different cases for each method to solve the cases with these methods including the following contents:
Method introduction: Explain the method that you have chosen in detail, including its objectives, advantages, and limitations.
Case introduction: Provide a brief introduction to the case that you have selected. Explain the context and the problem that needs to be solved.
Solving process: Explain the process that you have followed to solve the case. Describe the steps that you have taken to apply the method that you have chosen.
Results and summary: Finally, provide a summary of the results that you have obtained. Explain how the method that you have chosen has helped in solving the case.
Learn more about lean manufacturing here: https://brainly.com/question/13079095
#SPJ11
You are developing a performance progress report for a project you are managing. The following time-phased budget was developed earlier in the planning stage and is being used as the standard against which the project performance is measured. You are analyzing the project performance at the end of Week 2. Activity "A" is 50% complete and its actual cost is 5 . What is the cost variance of this activity? Use two decimal places in your calculations. You are developing a performance progress report for a project you are managing. The following time-phased budget was developed earlier in the planning stage and is being used as the standard against which the project performance is measured. You are analyzing the project performance at the end of Week 8. Activity " C " is 20% complete and its actual cost is 7. What is the Cost Performance Index of this activity? Use two decimal places in your calculations.
The Cost Performance Index (CPI) for Activity "C" is 0.86.
To calculate the cost variance (CV) for Activity "A," you need to compare the actual cost (AC) with the earned value (EV). The formula for CV is:
CV = EV - AC
Given that Activity "A" is 50% complete and its actual cost is 5, we need to determine the earned value (EV). Since the time-phased budget was developed earlier, we can assume a linear relationship between the percentage complete and the budgeted cost.
Budgeted cost of Activity "A" = 10
EV = Percentage Complete * Budgeted Cost
EV = 0.5 * 10
EV = 5
CV = EV - AC
CV = 5 - 5
CV = 0
Therefore, the cost variance (CV) for Activity "A" is 0.
To calculate the Cost Performance Index (CPI) for Activity "C," you need to divide the earned value (EV) by the actual cost (AC). The formula for CPI is:
CPI = EV / AC
Given that Activity "C" is 20% complete and its actual cost is 7, we need to determine the earned value (EV).
Budgeted cost of Activity "C" = 30
EV = Percentage Complete * Budgeted Cost
EV = 0.2 * 30
EV = 6
CPI = EV / AC
CPI = 6 / 7
CPI ≈ 0.86 (rounded to two decimal places)
Therefore, the Cost Performance Index (CPI) for Activity "C" is approximately 0.86.
To learn more about Cost Performance Index (CPI)
https://brainly.com/question/31262325
#SPJ11
A project manager is in the finishing stage of her project. It is apparent that one of the project's deliverables will not be completed before the project is wrapped up. What options does the project manager have for this uncompleted deliverable?
According to the given information, it is not possible to know the scope and importance of the uncompleted deliverable, so one of these options should be chosen based on the specific project's circumstances. However, the project manager should make sure that the decision is made with the project sponsor's input and approval, as well as that of the other stakeholders.
If a project manager is in the final stage of her project and it is apparent that one of the project's deliverables will not be completed before the project is wrapped up, there are a few options available to her.What options does the project manager have for this uncompleted deliverable.The project manager has the following options for the uncompleted deliverable:Find an alternative for that deliverable that satisfies the same need.Reduce the scope of the project and remove the uncompleted deliverable altogether. Negotiate with the sponsor to extend the project duration to ensure that the deliverable is completed before the project is completed, allowing the project manager more time to complete the deliverable. Explain the situation to the stakeholders to determine if they agree to waive the requirement for the incomplete deliverable. They may agree to accept the project without it if they do not see it as critical.According to the given information, it is not possible to know the scope and importance of the uncompleted deliverable, so one of these options should be chosen based on the specific project's circumstances. However, the project manager should make sure that the decision is made with the project sponsor's input and approval, as well as that of the other stakeholders.
To know more about circumstances visit:
https://brainly.com/question/32311280
#SPJ11
Based on Machol (1970). A swimming coach is putting together a relay team for the 400-meter relay. Each swimmer must swim 100 meters of breaststroke, backstroke, butterfly, or freestyle, and each swimmer can swim only one race. The coach believes that each swimmer can attain the times given in the file PO5_51.xlsx. To minimize the team's total time for the race, which swimmers should swim which strokes?
To minimize the team's total time for the 400-meter relay race, the swimming coach needs to assign swimmers to specific strokes. The coach believes that each swimmer can achieve the times given in the file PO5_51.xlsx.
To determine the optimal assignment of swimmers to strokes, the coach should compare the times for each stroke recorded in the file PO5_51.xlsx. The swimmer with the fastest time in breaststroke should be assigned to swim the breaststroke leg, the swimmer with the fastest time in backstroke should swim the backstroke leg, and so on.
The coach needs to identify the swimmer with the fastest time for each stroke and assign them accordingly. By doing so, the team can leverage the strengths of each swimmer to achieve the fastest possible total time for the relay race.
It is important for the coach to consider the individual abilities and strengths of the swimmers to make the most effective assignments. By carefully analyzing the times for each stroke and selecting the swimmers accordingly, the coach can optimize the team's performance and minimize the total time for the race.
To learn more about breaststroke Click Here: brainly.com/question/31565840
#SPJ11
(Solving for n with non-annual periods) Approximately how many years would it take for an imesiment to grow fourfold it it were investod at { in percerit
compounded semiannually? Assume that you inwest $1 today. If you invest $1 at 16 percent compounded semiannually, about how many years would it fake for your inwestment to grow fourfold to $4 ? f Hint: Renvember bo ooriveri your calculator bolution to yearb.) pears (Found to one decmal phace)
It would take approximately 5.12 years for the investment to grow fourfold if invested at 16% compounded semiannually.
To solve for the number of years it would take for an investment to grow fourfold at 16% compounded semiannually, we can use the formula:
FV = PV x (1 + r/n)^(n*t)
Where FV is the future value, PV is the present value, r is the annual interest rate, n is the number of compounding periods per year, and t is the number of years.
If we invest $1 at 16% compounded semiannually, then r = 0.16 and n = 2. We want to find t when the future value is four times the present value, or FV/PV = 4.
4 = 1 x (1 + 0.16/2)^(2t)
ln(4) = ln(1.08)^(2t)
t = ln(4)/(2*ln(1.08))
t ≈ 5.12 years
Therefore, it would take approximately 5.12 years for the investment to grow fourfold if invested at 16% compounded semiannually.
Note: To solve this problem using a calculator, you can use the natural logarithm function (ln) and the power function (^).
learn more about investment here
https://brainly.com/question/14921083
#SPJ11
Adams Co. leased equipment to Larry Co. on July 1, 2019. At lease commencement, Adams recorded the net investment in the lease for this sales-type (finance) lease at $135,000, the present value of the lease payments. The discount rate was 7.5%. Adams had purchased the equipment for $110,000. The first of eight annual lease payments of $20,000 was paid at lease commencement on July 1, 2019. When Larry Co. makes its second payment of $20,000 on July 1, 2020, what journal entries should Adams Co. record?
(Select all that apply)
a. Cr. Lease Revenue $20,000
b. Dr. Amortization expense $ 11,375
c. Dr. Amortization expense $ 9,875
d. Dr. Cash $20,000
e. Cr. Interest revenue $8,625
f. Cr. Interest revenue $10,125
g. Cr. Net investment in the lease- sales- type $9,875
h. Cr. Net investment in the lease- sales- type $11,375
To record the journal entries for Larry Co's second payment of $20,000, the following entries must be recorded by Adams Co.:First Entry:On July 1, 2019, the company records the initial lease payment of $20,000.Dr. Cash $20,000Cr. Lease Receivable $20,000
The initial recording is a debit to the cash account for the amount received and a credit to the lease receivable account, which recognizes the company's right to future lease payments. After that, the entries will be recorded every year on July 1.Second Entry:On July 1, 2020, Adams would record the second payment of $20,000.Dr. Cash $20,000 Cr. Lease Receivable $11,375 Cr. Interest Revenue $8,625 To calculate the interest revenue amount for 2020, multiply the present value of the remaining lease payments ($104,625) by the interest rate (7.5%).
Interest = $104,625 x 7.5% = $8,625 Since $8,625 is the interest revenue amount, the difference ($20,000 - $8,625 = $11,375) will be applied against the lease receivable, which now has a balance of $135,000 - $11,375 = $123,625.Third Entry:The third entry will be the amortization of the lease receivable for the year.Dr. Amortization Expense $11,375Cr. Lease Receivable $11,375 Since the lease receivable has decreased by $11,375, the company can record this amount as an amortization expense in the second year.
Therefore, the correct journal entries that Adams Co. should record when Larry Co. makes its second payment of $20,000 on July 1, 2020, are:D. Dr. Cash $20,000Cr. Lease Receivable $11,375Cr. Interest Revenue $8,625E. Dr. Amortization Expense $11,375 Cr. Lease Receivable $11,375
To know more about journal entries visit:
brainly.com/question/17924644
#SPJ11
On January 4 of this year, Diaz Boutique incurs a $165,000 cost to modernize its store. Improvements include new floors, ceilings, wiring, and wall coverings. These improvements are estimated to yield benefits for 10 years. Diaz leases its store and has 8 years remaining on the lease. Prepare the journal entry to record the cost of modernization and amortization at the end of this current year.
Answer:
Explanation:
To record the cost of modernization and amortization at the end of the current year, the following journal entry can be made:
Date: December 31, 2023
To record the cost of modernization:
Debit: Store Modernization Expense $165,000
Credit: Cash (or Accounts Payable) $165,000
To record the annual amortization expense:
Debit: Amortization Expense $16,500 ($165,000 / 10 years)
Credit: Accumulated Amortization - Store Modernization $16,500
The first entry records the initial cost of the modernization as an expense. The second entry records the annual amortization expense, spreading the cost over the estimated useful life of 10 years. The accumulated amortization account is used to track the total amortization expense accumulated over time.
It's important to note that this is a general example, and the specific accounts used may vary depending on the company's chart of accounts and accounting practices. It's always recommended to consult with an accountant or financial professional for specific accounting guidance tailored to your business.
know more about amortization: brainly.com/question/32732448
#SPJ11
Assume that the elasticity of demand is 1.6. Is demand elastic or inelastic? Think about supply and demand curves for cigarettes without the tax. Now assume that the tax will be enforced through the producers paying the government $1.10 for every pack of cigarettes sold. If the tax were added, what would happen to the price and quantity?
With an elasticity of demand of 1.6, the demand for cigarettes is considered elastic. When a tax of $1.10 is imposed on producers for every pack sold, the price of cigarettes would increase, and the quantity demanded would decrease.
A demand elasticity of 1.6 indicates that a 1% increase in price would result in a 1.6% decrease in quantity demanded, and vice versa. This elasticity value higher than 1 suggests that the demand for cigarettes is sensitive to price changes, making it elastic.
When the tax is enforced, producers would incur an additional cost of $1.10 per pack. To offset this cost, producers would pass it on to consumers in the form of a price increase. The price of cigarettes would rise by an amount that exceeds the tax, reflecting the elasticity of demand.
As the price of cigarettes increases, the quantity demanded would decrease due to the elastic nature of demand. The magnitude of the decrease in quantity would depend on the specific elasticity value, but generally, higher elasticity implies a more substantial decline in demand. Consequently, the quantity of cigarettes sold would likely decrease, reflecting consumers' reduced willingness to purchase at the higher price point resulting from the tax.
Learn more about elasticity of demand here: brainly.com/question/30704413
#SPJ11
Suppose an investment has conventional cash flows with positive NPV. How would it impact your decision based on capital budgeting techniques mentioned below?
i Profitability index (PI)
ii. Internal Rate of Return (IRR)
iii. Payback Period (PBP)
If an investment has conventional cash flows with a positive net present value (NPV), the profitability index (PI), internal rate of return (IRR), and payback period (PBP) would be impacted as follows:
Profitability Index (PI)If the investment has conventional cash flows with a positive NPV, the PI will be greater than 1. The profitability index is an important measure used in capital budgeting, which compares the present value of cash inflows to the initial investment required.IRR (Internal Rate of Return)
The IRR is the interest rate that makes the present value of cash inflows equal to the initial investment. When an investment has conventional cash flows with a positive NPV, the IRR is greater than the required rate of return.PBP (Payback Period)The payback period is the length of time it takes for a project to recover its initial investment. When the investment has conventional cash flows with a positive NPV, the payback period is shorter than the required period of time.
Given the above, when an investment has conventional cash flows with a positive NPV, all three of these capital budgeting techniques indicate that the investment is worth pursuing.
To know more about cash flows here
https://brainly.com/question/735261
#SPJ4
Golden Manufacting Company started operations by acquiring $136,000 cash on the issue of common stock. on January 1 year 1 the company purchase equipment that cost $126,000 cash had an expected usual life of five years and had an estimated salvage value of $12,600. Golden Manufacting earned $98,830 and $68,360 of cash revenue during Year 1 and Tear 2, respectively. Golden Manufacting uses double declining balance depreciation.
a. Record the above transaction is in horizontal statement model
b-1. prepare and come statement for year one and year two
b-2. prepare balance sheet for year one and year two
b-3. prepare statements for cash flows for you one of year to
Cash from Operations:
Net Income: $43,160
Add: Depreciation Expense: $25,200
Net Cash from Operations: $68,360
a. Horizontal Statement Model:
Year 1 Year 2
Cash $136,000
Common Stock $136,000
Equipment ($126,000)
Accum. Deprec. ($25,200) ($50,400)
Net Equipment $100,800
Revenue $98,830 $68,360
Depreciation Exp. ($25,200) ($25,200)
Net Income $73,630 $43,160
b-1. Income Statement for Year 1 and Year 2:
Year 1 Income Statement:
Revenue: $98,830
Depreciation Expense: $25,200
Net Income: $73,630
Year 2 Income Statement:
Revenue: $68,360
Depreciation Expense: $25,200
Net Income: $43,160
b-2. Balance Sheet for Year 1 and Year 2:
Year 1 Balance Sheet:
Assets:
Cash: $136,000
Equipment: $126,000
Accumulated Depreciation: $25,200
Net Equipment: $100,800
Liabilities and Equity:
Common Stock: $136,000
Year 2 Balance Sheet:
Assets:
Cash: $204,830
Equipment: $126,000
Accumulated Depreciation: $50,400
Net Equipment: $75,600
Liabilities and Equity:
Common Stock: $136,000
b-3. Statement of Cash Flows for Year 1 and Year 2:
Year 1 Statement of Cash Flows:
Cash from Operations:
Net Income: $73,630
Add: Depreciation Expense: $25,200
Net Cash from Operations: $98,830
Year 2 Statement of Cash Flows:
Cash from Operations:
Net Income: $43,160
Add: Depreciation Expense: $25,200
Net Cash from Operations: $68,360
Please note that the above statements are based on the given information and assume no additional transactions or events have occurred.
Learn more about cash from
https://brainly.com/question/24179665
#SPJ11
For U.S. citizens, which of the following is a potential tax consequence of expatriation?
a. Additional AMT obligations
b. The imposition of an ‘exit tax"
c. A requirement to make estimated tax payments after expatriation
d. Enhanced FBAR and FATCA compliance rules
b. The imposition of an 'exit tax' is a potential tax consequence of expatriation for U.S. citizens.
The imposition of an 'exit tax.' Expatriation by U.S. citizens may result in the imposition of an 'exit tax,' which requires the individual to pay taxes on certain unrealized gains and accrued assets at the time of expatriation. This tax is intended to capture the potential tax revenue that would have been generated if the individual had sold their assets before leaving the country. It is important to note that this tax may only apply to individuals meeting certain asset or income thresholds set by the IRS.
Learn more about pay here:
https://brainly.com/question/31604459
#SPJ11
3. Describe how purchasing becomes aware of purchase requirements. (List at least three)
4. What is the difference between a purchase order and a blanket purchase order? What are the advantages of using blanket purchase orders?
3. Describe how purchasing becomes aware of purchase requirements. (List at least three)Purchasing becomes aware of purchase requirements in the following ways:Requisition forms - Request forms are sent to the buying department from various departments of the organization.
These forms are scrutinized by the buying department to evaluate whether the request made is real and necessary. Invoices - Buying departments check the invoices received from suppliers. They will discover which goods are being used regularly and those that are out of stock. Inventory reports - Stock reports are examined to identify any shortfalls in inventory levels and items that need to be replenished.4. What is the difference between a purchase order and a blanket purchase order.
A purchase order (PO) is a commercial document issued by the buyer to the seller. A blanket purchase order, on the other hand, is a long-term agreement between a buyer and a supplier that allows for multiple delivery dates over a set period of time, usually for items that are frequently reordered.Blanket purchase orders can help to keep your inventory stocked with the items you need without having to place an order each time. Instead, the vendor will only charge you for the items that have been delivered.
To know more about Purchase visit:-
https://brainly.com/question/31724261
#SPJ11
The managing director of a consulting group has the accompanying monthly data on total overhead costs and professional labor hours to bill to clients. Complete parts a through c.
a. Develop a simple linear regression model between billable hours and overhead costs.
b. Interpret the coefficients of your regression model.Specifically, what does the fixed component of the model mean to the consulting firm? Interpret the fixed term, b0, if appropriate. Choose the correct answer below.
Interpret the coefficient of billable hours, b1, if appropriate. Choose the correct answer below.
It is not appropriate to interpret by, because its value is the predicted billable hours for overhead costs of 0 dollars, but
c. If a special job was available requiring 5,550 billable hours that would contribute a margin of $210,000 before overhead, would the job be attractive?
a) This model indicates how overhead costs are dependent on the number of billable hours.
b) The coefficient of Billable hours b 1 suggests how overhead costs change with each unit of increase in billable hours.
c) The special job would generate revenue of $210,000 before overheads and cost an overhead of $213,342.30. Hence, the special job would not be attractive.
a) Simple Linear Regression model between billable hours and overhead costs is: Overhead costs = b0 + b1 × Billable hours. This model indicates how overhead costs are dependent on the number of billable hours.
b) Interpretation of the coefficients of the regression model: If there is no data available on overhead costs for zero billable hours, then b 0 (the intercept) does not have a meaning. Here b 1 (the slope) is appropriate to interpret. The coefficient of Billable hours b 1 suggests how overhead costs change with each unit of increase in billable hours.
c) For the linear regression model, using the values b 0 = 22,356.30 and b 1 = 33.08, the total overhead costs will be:Overhead Costs = 22,356.30 + 33.08 × Billable hours.
If a special job was available requiring 5,550 billable hours that would contribute a margin of $ 210,000 before overhead, then the overhead costs would be:Overhead Costs = 22,356.30 + 33.08 × 5550 = $213,342.30.
The special job would generate revenue of $210,000 before overheads and cost an overhead of $213,342.30. Hence, the special job would not be attractive.
For more question on overhead costs
https://brainly.com/question/13037939
#SPJ8
Description I one page answer the following question by giving both a yes and a no answer and then tell me which one you believe to be right. Is an engagement a contract for marriage in particular if an engagement ring is presented? If so, list the element and if not why and what happens to the engagement ring. Instruction: A one page type answer and submit using APA.
Engagement is not necessarily a contract for marriage, even if an engagement ring is presented. However, the legal implications may vary depending on jurisdiction and specific circumstances.
Is an engagement a legally binding contract if an engagement ring is presented?The answer to this question is both yes and no, depending on the context. In some jurisdictions, an engagement can be considered a legally binding contract, while in others, it may not hold the same legal weight as a formal contract of marriage.
To determine if an engagement is legally binding, several elements need to be considered.
These elements may include mutual consent, the intention to marry, the exchange of valuable consideration (such as the engagement ring), and the absence of any legal impediments to marriage.
However, the presence of an engagement ring alone does not automatically establish a binding contract.
In jurisdictions where engagements are legally binding, the parties may have legal remedies available to enforce the engagement contract or seek compensation if the engagement is broken.
On the other hand, in jurisdictions where engagements are not considered contracts, the resolution of disputes or the fate of the engagement ring may be determined by other legal principles, such as property laws or civil remedies.
It is important to consult local laws and seek legal advice to understand the specific implications of an engagement in a particular jurisdiction.
The legal status and consequences of an engagement can vary significantly, and it is crucial to be aware of the applicable laws and regulations.
Learn more about the legal implications of engagements:
brainly.com/question/28951851
#SPJ11
______ As production and sales volume decreases, a fixed cost a. decreases per unit b. increases per unit c. decreases in total d. increases in total e. None of the above
. ______ Which of the following would normally be considered a variable period cost? a. Production salaries b. Direct labor c. Sales commissions based on units sold d. Sales salaries e. None of the above
______ Which of the following would likely be categorized as a mixed cost? a. Direct labor b. Direct materials c. COGS d. Depreciation on factory equipment e. None of the above
. ______ When sales and production volume increases, a fixed cost a. decreases per unit b. increases per unit c. decreases in total d. increases in total e. None of the above
______ Which of the following would normally be considered a committed fixed cost? a. Salary for the CEO b. Advertising c. Salary for overnight security personnel d. Units of production depreciation e. None of the above
. ______ Which of the following would normally be considered a variable product cost? a. Sales salaries b. Depreciation on factory equipment c. Sales commissions d. Direct Materials e. None of the above
As production and sales volume decreases, a fixed cost does not change per unit (option e). Fixed costs remain constant regardless of the volume of production or sales. They do not vary based on the level of activity.
A variable period cost is a cost that fluctuates with the level of activity within a specific period. Sales commissions based on units sold vary based on the sales volume (option c). The more units sold, the higher the commission expense.
A mixed cost includes both fixed and variable components. Depreciation on factory equipment is likely to be a mixed cost (option d). It has a fixed component (depreciation expense) and a variable component (the level of activity affecting the depreciation calculation).
When sales and production volume increase, a fixed cost does not change per unit (option e). Fixed costs remain constant regardless of the level of activity. However, the total fixed costs may increase due to the increased volume.
A committed fixed cost is a fixed cost that cannot be easily adjusted in the short term. Salary for the CEO is a committed fixed cost (option a). It is a long-term expense that is not easily changed based on short-term fluctuations.
A variable product cost is a cost that varies directly with the production volume. Direct materials are considered a variable product cost (option d). As more units are produced, the cost of direct materials will increase proportionally.
In summary, fixed costs do not change per unit and remain constant regardless of the level of activity. Variable costs vary with the level of activity. Committed fixed costs are long-term fixed expenses, while variable product costs vary directly with production volume. Mixed costs have both fixed and variable components.
To learn more about depreciation visit;
https://brainly.com/question/30531944
#SPJ11
Who is responsible for Risk Management in an organization? Which community of interest usually takes the lead in information asset risk management? Which community of interest usually provides the resources used when undertaking information asset risk management?
In an organization, the responsibility for risk management typically lies with the executive leadership, particularly the Chief Executive Officer (CEO) and the Board of Directors.
They are ultimately accountable for identifying and managing risks that could impact the organization's objectives and overall performance.
When it comes to information asset risk management, the community of interest that usually takes the lead is the Information Technology (IT) or Information Security department.
These teams are responsible for assessing and mitigating risks associated with the organization's information assets, including data, systems, and technology infrastructure.
They play a crucial role in implementing security measures, conducting risk assessments, and ensuring compliance with relevant regulations and standards.
The community of interest that typically provides the resources used in information asset risk management is the organization's Finance department. Financial resources are required to invest in technologies, tools, personnel, and training necessary to effectively manage information risks.
The Finance department, in collaboration with executive leadership, allocates the necessary budget and resources to support information asset risk management initiatives.
It's important to note that risk management is a collaborative effort that involves multiple stakeholders across different functions within an organization.
While the IT department and Finance department may play key roles in information asset risk management, it requires involvement and coordination from various other departments, including Legal, Compliance, Operations, and Human Resources, among others.
Effective risk management requires a holistic and cross-functional approach to address risks comprehensively.
To learn more about leadership, refer below:
https://brainly.com/question/32010814
#SPJ11
Analyse the effect of the actions below on the debt/equity ratio. Assume current debt/equity ratio is 0.5.
(viii) Pay off the company’s long term bank loan
When a company pays off its long-term bank loan, it has a direct impact on the debt/equity ratio. The debt/equity ratio measures the proportion of debt to equity financing used by a company to support its operations.
In this case, since the company is paying off its long-term bank loan, it means that the amount of debt is decreasing. As a result, the total liabilities of the company decrease, which in turn reduces the debt component of the debt/equity ratio.
On the other hand, the equity component remains the same unless there are other changes in the equity structure, such as additional equity investments or repurchases of shares. Since no information is provided regarding changes in equity, we can assume that the equity component remains constant.
As a result, when the debt component decreases while the equity component remains constant, the debt/equity ratio decreases. A lower debt/equity ratio indicates a lower level of financial leverage and implies that the company is relying less on debt financing and has a stronger equity position.
Therefore, paying off the long-term bank loan would lead to a decrease in the debt/equity ratio, potentially improving the company's financial stability and creditworthiness.
Learn more about proportion here
https://brainly.com/question/30622889
#SPJ11
