Please help me. Please help me. ​

Answer:

40 kW

Explanation:

A railcar has a continuous 1000 N decelerating force any time it is in motion. If no braking occurs, how much power would be required to keep the railcar moving at 40 m/s

Solution:

Power in Physics is the rate of doing work and the work can be mechanical, electrical, etc. The S.I unit of power is the watts (W).

The power required to keep the car moving must match the work done by the friction force (decelerating force) that tends to slow down the railcar.

Work done = Force * displacement

Power = Work done / time = (Force * displacement) / time

Power = Force * (displacement / time)

Power = force * velocity = 1000 N * 40 m/s = 40000 W

Power = 40 kW

Answer:

A weed is a plant considered undesirable in a particular situation, "a plant in the wrong place". Examples commonly are plants unwanted in human-controlled settings, such as farm fields, gardens, lawns, and parks

Answer:

Value of the resistors​ R = 2 ohm

Explanation:

Given:

Resistor R1 = 4 ohm

Resistor R2 = 4 ohm

Find:

Value of the resistors​ R

Computation:

We know that Resistor R1 and Resistor R2 connected in parallel series.

So,

Using common resistance in parallel series

⇒ 1/R = 1/R1 + 1/R2

⇒ 1/R = 1/4 + 1/4

⇒ 1/R = (1 + 1) / 4

⇒ 1/R = 2/4

⇒ R = 4/2

⇒ R = 2

Value of the resistors​ R = 2 ohm

Answer:

Explanation:

Una magnitud fundamental es aquella que se define por si misma y es independiente de las demás (masa, tiempo, longitud, etc.). magnitud derivada. Una magnitud derivada es aquella que se obtiene mediante expresiones matemáticas a partir de las magnitudes fundamentales (densidad, superficie, velocidad).

Answer:

[tex]d=58m[/tex]

Explanation:

From the question we are told that:

Initial Speed [tex]U=12m/s[/tex]

Time [tex]T=5.6s[/tex]

Angle [tex]\theta=30[/tex]

Generally the  Newton's equation for motion is mathematically given by

[tex]d=d'+ut+\frac{at^2}{2}[/tex]

[tex]d=12cos30*5.6[/tex]

[tex]d=58m[/tex]

Answer:

In order to improve visibility

Explanation:

Infrared telescopes are made using infrared cameras that contain infrared detectors which are solid-state and are maintained at very cold (cryogenic) temperatures

Infrared radiation is absorbed by water vapor which is present in the Earth's atmosphere, leading to the limitation of the use of infra red telescopes at high altitudes such as mountains, high flying planes or satellites

Answer:

second column

Explanation:

Answer:

Trial 3 is the answer.

Explanation:

Answer:

the component of light reflected by that object

Explanation:

Complete question is;

A cylinder of compressed gas is at a temperature of 23°C. It is cooled until it reaches the pressure of 2000kPa. It has to be cooled to 90K before this happens. Calculate the starting pressure of the gas

Answer:

Starting pressure = 604 KPa

Explanation:

We are given;

Initial temperature; T1 =23°C = 298 K

Final temperature; T2 = 90 K

Final pressure; P2 = 2000 KPa

From gay lussac's law, we know that;

P1•T1 = P2•T2

P1 = (P2•T2)/T1

P1 = (2000 × 90)/298

P1 ≈ 604 KPa

➜what is kepler's law??

[tex]\huge\red{\boxed{\huge\mathbb{\red A \pink{N}\purple{S} \blue{W}\orange{ER}}}}[/tex]

Kepler gave the three laws or theorems of motion of the orbitals bodies

[tex]{\huge {\bold{ \red{ \star}}}}{ \blue{ \bold{FIRST \: \: \: LAW}}}[/tex]

This law state that the celestial bodies revolves around the stars in elliptical orbit and star as a single focus.

Example :- Earth revolves around the Sun as assuming it as single focus

This also shows that earth revolves around the sun in elliptical orbit.

[tex]{\huge {\bold{ \blue{ \star}}}}{ \green{ \bold{SECOND \: \: \: LAW}}}[/tex]

Area covered by the planet is equal in equal duration of time irrespective of the position of the planet.

It also states that Angular momentum is constant

As Angular momentum is constant it means areal velocity is also constant.

[tex]\frac{ \triangle \: A}{ \triangle \: T} = \frac{L}{2m}△T△A=2mL[/tex]

where:-

A is the area.

T is the time.

L is the angular momentum.

M is the mass of the body.

[tex]{\huge {\bold{ \green{ \star}}}}{ \purple{ \bold{THIRD \: \: \: LAW}}}[/tex]

square of the time of the revolution is directly proportional to the cube of the distance between the planet and star in Astronomical unit.

[tex]{T}^{2} = {a}^{3}T2=a3[/tex]

where:-

T = time of revolution

a is the distance between the planet and star.

[tex]\purple\star \: {Thanks \: And \: Brainlist} \blue \star \\ {\orange{ \star}}{if \: U \: Like d \: My \: Ans} {\green{ \star }}[/tex]

Answer:

Blood alcohol content (BAC) is a measure of the amount of alcohol that is present in the blood.

A heavier person will have a lower blood alcohol level due to a greater amount of water in their body. The more a person weighs, the more water he/she tends to have in his/her body. The water has a diluting effect on the alcohol so the BAC will be lower in comparison with a person who is slimmer  and has less water in the body.

Explanation:

Answer:

Option D. 5Ω e 0.6 A

Explanation:

1. Determination of the equivalent resistance.

We'll begin by calculating the equivalent resistance of resistor B and resistor C. This can be obtained as follow:

Resistor B (R₆) = 2 Ω

Resistor C (R꜀) = 2 Ω

Equivalent Resistance (R₆꜀) =?

R₆꜀ = R₆ × R꜀ / R₆ + R꜀ (parallel connection)

R₆꜀ = 2 × 2 / 2 + 2

R₆꜀ = 4 / 4

R₆꜀ = 1 Ω

Finally, we shall determine the equivalent resistance of the circuit. This can be obtained as follow:

Resistor A (Rₐ) = 2 Ω

Equivalent resistance of resistor B and C (R₆꜀) = 1 Ω

Resistor D (Rₔ) = 2 Ω

Equivalent Resistance (R) =?

R = Rₐ + R₆꜀ + Rₔ (series connection)

R = 2 + 1 + 2

R = 5 Ω

Thus, the equivalent resistance of the circuit is 5 Ω

2. Determination of the total current in the circuit.

Potential difference (V) = 3 V

Equivalent resistance (R) = 5 Ω

Total current (I) =?

V = IR

3 = I × 5

Divide both side by 5

I = 3 / 5

I = 0.6 A

Thus, the total current in the circuit is 0.6 A

Summary:

Equivalent resistance = 5 Ω

Current = 0.6 A

Option D gives the current answer to the question.

Answer:

the force of resistance on the right team is 360 N

Explanation:

Given;

force of the left team, = 1000 N

total mass of the right team, m = 300 kg

acceleration of the right team, a = 1.2 m/s²

The force of resistance of the right team is calculated as;

Force = mass x acceleration

Force, F = 300 x 1.2

Force = 360 N

Therefore, the force of resistance on the right team is 360 N

Answer:

Firstly, science helps our understanding of the world around us. Everything we know about the universe, from how trees reproduce to what an atom is made up of, is the result of scientific research and experiment.

Scientists use the scientific method to collect measurable, experimental evidence in an experiment related to a term (often in the form of an if/then statement), the results aiming to support or differ a theory. In other words, scientific method helps scientists get accurate, repeatable results.

Answer:

Chemical Bonding

Explanation:

Answer:

(a) i) The distance travelled by the cycle in half round is approximately 65.97 m

ii) The displacement is 42 m

(b) (i) The distance travelled in one round is approximately 131.95 m

(ii) The displacement of the cycle in one round is 0

Explanation:

The diameter of the track through which the cycle travels, D = 42 m

(a) i) Half round is the motion of half the length of the circular path

The distance travelled by the cycle in half round = The length of half the circular track = (1/2) × π × D

∴ The distance travelled by the cycle in half round = (1/2) × π × 42 m = 21·π m ≈ 65.97 m

ii) The displacement half round = The change in the location of the cycle = The difference between the start and stop locations of the cycle on a straight line after half round

The angle at the center of the circular path the cycle turns in half round  = 180°

Therefore, the path between the start and stop location of the cycle in half round = The diameter of the circular track

The displacement of the cycle in half round = The diameter of the circular track = 42 m

(b) (i) The distance travelled in one round = The perimeter of the circular track = π·D

∴ The distance travelled in one round = π × 42 m ≈ 131.95 m

(ii) The displacement of the cycle in one round = The change in the location of the cycle

The start and stop location of the cycle after moving one round is the same, therefore, there is no change in the location of the cycle.

Therefore we have;

The displacement of the cycle in one round = 0 (no change in location of the cycle)

Answer:

The linear speed of the car, v, is 24.26 m/s

Explanation:

Given;

radius of the car's tire, r = 0.330 m

angular speed of the car, ω = 11.7 revolutions/s

The angular speed of the car in radian per second:

[tex]\omega = 11.7 \ \frac{rev}{s} \times \frac{2\pi \ rad}{1 \ rev} \\\\\omega = 73.523 \ rad/s[/tex]

The linear speed of the car, v, is calculated as;

v = ωr

v = 73.523 rad/s  x  0.33 m

v = 24.26 m/s

Therefore, the linear speed of the car, v, is 24.26 m/s

Answer:

Deflating the tires by pulling the valve stems

Explanation:

When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.

Answer:

-29.9907

Explanation:

c = Q / (mΔT)

You're looking for ΔT, so you would plug in what you already know and get C= -12540/(100 x ΔT)

then you would solve

Other person is incorrect, I did the test on edg.

Answer:  

A. by providing water for irrigation and restoring trees to areas where forests once existed

The construction of dams positively affect natural resources by providing water for irrigation.

Natural resources serves as materials thst is found in nature which are used by humans. These natural substances are soil, water.

Therefore, building of dams can help irrigation by using water which is a natural resources.

Learn more about natural resources at;

https://brainly.com/question/24623157

Answer:

Coulomb, unit of electric charge in the metre- kilogram- second- ampere system, the basis of SI system of physics unit. The coulomb is defined as the quantity of electricity transported in one second by a current of one ampere.

A group of two or more atoms.

Answer:

C) Potential energy due to intermolecular forces.

Answer:

1. The displacement is 427.2 km.

Explanation:

1. A = 150 km North

B = 400 km East

The net displacement is given by

[tex]R =\sqrt{400^2 + 150^2 }\\\\R = 427.2 km[/tex]

Answer:

2.38m

Explanation:

Use potential energy

PE= mgh

42= 1.8*9.8*h

solve for h

to get h= 2.38 m

Answer:

by preventing flooding, creating reservoirs, and providing water for irrigation

Dams and waterways store and provide water for irrigation so farmers can use the water for growing crops. This idea goes way back into history. Irrigation is an important part of using water. In areas where water and rain are not abundant (like the desert), irrigation canals from rivers and dams are used to carry water.

Dams help in preventing floods. They catch extra water so that it doesn’t run wild downstream. Dam operators can let water out through the dam when needed.

If the coefficient of static friction is 0.3, then the minimum force required to get it moving is equal in magnitude to the maximum static friction that can hold the body in place.

By Newton's second law,

• the net vertical force is 0, since the body doesn't move up or down, and in particular

∑ F = n - mg = n - 50 N = 0   ==>   n = 50 N

where n is the magnitude of the normal force; and

• the net horizontal force is also 0, since static friction keeps the body from moving, with

∑ F = F' - f = F' - µn = F' - 0.3 (50 N) = 0   ==>   F' = 15 N

where F' is the magnitude of the applied force, f is the magnitude of static friction, and µ is the friction coefficient.

Answer:

Explanation:

First I converted the km/h to m/s, which is the more common unit for velocity. In m/s, 105 km/h is 29.2. Thus, to find the x component of the vector:

29.2cos25 = 26 m/s

If you want it in km/h:

105cos25 = 95 km/h