Post a few short scenarios involving motion, in which you describe what is happening in everyday terms, including deceleration ?

Photon is  particle of electromagnetic radiation , spectral lines are discrete pattern of narrow bands produced by heated gases , excited means states with higher energy than  ground state , quantum is discrete amount of energy, electromagnetic spectrum is range of different types of electromagnetic radiation , wave-particle duality is having characteristics of both wave and  particle.

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

Learn more about electromagnetic radiation,here:

https://brainly.com/question/10759891

#SPJ1

Ionization constant of a reaction is the ratio of the molar concentration of product to that of reactants. For the given  reaction, the ionization constant is 155.8 .

A compound or element gets ionized to form its anion or cation by the gain or lose of electrons.

Here, acetic acid, CH₃COOH ionizes to form hydronium ion and acetate ion. The ratio of product of molar concentrations of products to the product of molar concentrations of the reactants is called the reaction constant.

The ionization constant of the given reaction is written as:

K = [H₃O]⁺ [CH₃COO-]/[CH₃COOH]

Given, [CH₃COOH] = 0.8 M

[CH₃COO-] = 16.4 M

and [H₃O]⁺ = 7.6 M.

then, K = 7.6 M × 16.4 M/ 0.8 M = 155.8

Therefore, the ionization constant of the reaction is 155.8.

Find more on ionization constant:

brainly.com/question/13794673

#SPJ1

Generally, an increase in temperature decreases the solubility of a gas and increases the solubility of a solid.

Basically, solubility is defined as the maximum amount of a substance that will dissolve in a given amount of solvent at a specified temperature. Solubility is a well known characteristic property of a specific solute–solvent combination, and different substances have greatly differing solubilities.

Increasing the temperature will increase the solubility of the solute. This can be proved with an example of a solute whose solubility increases with greater temperature is ammonium nitrate, which can be used in first-aid cold packs.

The gaseous solute's solubility falls because the kinetic energy of the gaseous solute increases as the temperature rises. As a result of this its molecules are more likely to escape the solvent molecule's attraction and return to the gas phase.

Learn more about solubility from the link given below.

https://brainly.com/question/13164863

#SPJ4

In a Lewis acid-base reaction, the base donates an electron pair to/from the acid. This is an example of a general reaction trend, i.e., that electron-rich species react with electron-deficient species.

Lewis acids are the electron-deficient electrophilic chemical species, which readily accept a pair of electrons, whereas Lewis bases are the electron-rich nucleophilic species. Thus, in the Lewis acid-base reaction, the Lewis base will readily donates an electron pair to the Lewis acid to form a coordinate bond. Thus, it is a kind of chemical reaction where an electron-rich species (Lewis base) will reacts with an electron-deficient species (Lewis acid).

--The given question is incorrect, the correct question is

"In a Lewis acid-base reaction, the base _____ an electron pair to/from the acid. This is an example of a general reaction trend, i.e., that electron-rich species react with electron-_____ species. a) donates, rich b) accepts, deficient c) accepts, rich d) donates, deficient"--

To know more about Lewis acids here

https://brainly.com/question/15570523

#SPJ4

Answer:

One experiment that shows that gas has a low density is the displacement of water by a gas. To do this experiment, take a container filled with water and place a balloon filled with gas (such as hydrogen or helium) on top of the water. The balloon will displace the water, and the amount of water displaced will be equal to the volume of the balloon. This experiment shows that gases have a lower density than liquids, since the balloon is able to displace a greater volume of water than its own volume.

Molality = [tex]\frac{ Moles of solute}{Kilograms of solvent}[/tex]

X = [tex]\frac{3.69 mol}{3.69 . mol + \frac{1000.g}{18.01.g.mol^{-1} } }[/tex] = 0.062

Explanation:

Mole fraction = X = [tex]\frac{Moles.of .solute }{Moles.of.solute.and.moles.of.solvent}[/tex]

Thus

Moles of solute = 3.69 mol

Moles of solvent = [tex]\frac{1000}{18.01.g.mol^{-1} }[/tex] = 55.5 mol

So, X = 0.062

Know more about Mole fraction.

https://brainly.com/question/22393252

.

Among the given, "the amino-acid sequence" has the most dramatic influence on the characteristics of an individual protein.

Hence, option (a) is correct.

Each protein's precise function and distinctive 3-dimensional structure are determined by the order of the amino acids.

The folding and intramolecular bonding of the linear amino acid chain, which ultimately creates the protein's distinctive three-dimensional form, are driven by the main structure of a protein, which is its amino acid sequence.

The quantity of the limiting amino acid, or the amino acid present in the protein in the least amount, which determines the biological value, may only be as high as that amount. Lysine is frequently the limiting amino acid, although being less prevalent than the other amino acids.

For more questions on the amino-acid sequence

https://brainly.com/question/29635678

#SPJ4

The complete question may be like:

Which of the following has the most dramatic influence on the characteristics of an individual protein?

A) the amino-acid sequence

B) the amino-acid composition

C) the location of its encoding gene within the genome

D) the stereochemistry at the a-carbon

E) the sequence of tRNA molecules involved in its translation

The maximum mass of chrome alum crystals that could be made is 9.98g

n = m/M

To describe the amount of matter in a body, the word "mass" is used. The kilogramme is the unit of mass used in the SI (kg). At any given time, a body's mass remains constant. only when a body receives or loses a sizable amount of energy, which happens rarely.

n(K₂Cr₂O7) = 2.94g/294g/mol

n(K₂Cr₂O7) = n(K₂SO4) = n(K2SO4 ∗ Cr2(SO4)3 ∗ 24H2O)

m = nM

m(K2SO4 ∗ Cr2(SO4)3 ∗ 24H2O)

= 0.01mol ∗ 998g/mol

= 9.98g

Hence, the maximum mass of chrome alum crystals that could be made is 9.98g

Learn more about Mass here:

brainly.com/question/19385703

#SPJ1

The average density of three trials are 3.61 g/mL

It is given that

Density in first trial d1 = 3.5512 g/mL

Density in second trial d2 = 3.4188 g/mL

Density in first trial d3 = 3.8617 g/mL

We have to find average density

Density is a measurement that compares the amount of matter an object has to its volume. An object with much matter in a certain volume has high density. An object with little matter in the same amount of volume has a low density.

Average density = sum of all density/number of density

Average density = d1 + d2 + d3

3

Average density =

3.5512 + 3.4188 + 3.8617

3

= 3.61 g/mL

Hence, average density of three trials are 3.61 g/mL

Learn more about Density here:

https://brainly.com/question/1354972

#SPJ1

The temperature is taken as standard temperature of 298 K here. The root mean square velocity of  helium gas is  1363.15 m/s and that of Kr gas is 290.6 m/s. the RMS velocity of methane gas is 681.5 m/s and that of oxygen gas is 481.9 m/s.

The root means square velocity of a gas is given by the equation:

v = √3RT/M

where M is the mass of the gas in Kg.

Mass of He = 4 g = 0.004 Kg

T is taken as 298 K

R = 8.314 J/K mol

v = √(3× 8.314 ×298 /0.004 ) = 1363.15 m/s

Mass of Kr = 83.79 g = 0.088 Kg

v = √(3× 8.314 ×298 /0.088 ) = 290.6 m/s

Mass of CH₄ = 16 g = 0.016 Kg

v = √(3× 8.314 ×298 /0.016 ) = 681.5 m/s

Mass of O₂ = 32 g = 0.032 Kg

v = √(3× 8.314 ×298 /0.032 ) = 481.9 m/s

Find more on RMS velocity:

https://brainly.com/question/30097478

#SPJ1

Answer:

5 M citric acid is the most acidic solution.

The conversion of units is a process of changing one unit to another, while preserving the same value.

2.62e-7 lb/ft^3 (3 sig figs)

To learn more about The conversion of units refer to:

https://brainly.com/question/141163

#SPJ1

The structure you describe contains a double bond between the first and second carbon atoms, with the first carbon having a CH2CH3 group attached above the plane of the double bond and an H atom attached below it, and the second carbon having a CH2CH2CH3 group attached below the plane of the double bond and an H atom attached above it.

The reaction of the CH2CH3 and CH2CH2CH3 groups with the double bond can be explained in terms of electron configuration. The double bond consists of two electrons in a pi bond, which is a pair of shared electrons between the two carbon atoms. When the CH2CH3 and CH2CH2CH3 groups react with the double bond, the electrons in the pi bond are pushed apart and replaced with a single bond between the two carbon atoms, with the CH2CH3 and CH2CH2CH3 groups now attached to the respective carbons. This process is called a substitution reaction and is the result of the higher electron density of the CH2CH3 and CH2CH2CH3 groups compared to the double bond.

Learn more about atoms:

https://brainly.com/question/6258301

#SPJ4

Answer:

Science is:

objective

based on fact

must be ethical

Explanation:

Science is considered to be objective because it is based on empirical evidence and systematic observation, and it strives to eliminate personal bias and opinions from the scientific process. Science is based on fact, as it relies on repeatable and verifiable experiments to test hypotheses and theories. And, it is important for science to be ethical because the scientific community has a responsibility to ensure that research is conducted in an ethical and responsible manner, and that the results are reported accurately and honestly.

Single-solvent recrystallization is a laboratory technique used to purify solid compounds.

The necessary steps are:

Choose the appropriate solvent: It is important to choose a solvent that has a high solubility for the solute at elevated temperatures and a low solubility at room temperature.

Dissolve the solute in the warm solvent: The solute is dissolved in a minimum amount of the chosen solvent and heated until it is fully dissolved.

Performing a filtration: The mixture is then filtered to separate the solute from any impurities or undissolved solids. Gravity filtration or vacuum filtration can be used.

Dry the solute: Finally, the purified solute is dried by evaporating any remaining solvent.

In summary, the necessary steps for a single-solvent recrystallization experiment are choosing the appropriate solvent, dissolving the solute in the warm solvent, performing a filtration, and drying the solute.

Learn more about Single-solvent recrystallization:

brainly.com/question/14918321

#SPJ4

None of the images show decreased turgor pressure is Decreasing turgor pressure in a plant cell.

The fundamental unit of life in species belonging to the kingdom Plantae is the cell.

They are eukaryotic cells, which have specialized components called organelles and a real nucleus that performs several duties. Chloroplasts are unique organelles found in plant cells that use photosynthesis to produce carbohydrates.

Cell walls, chloroplasts, and the central vacuole of plant cells set them apart from those of other creatures.

Therefore, None of the images show decreased turgor pressure is Decreasing turgor pressure in a plant cell.

To learn more about plant cell, refer to the link:

https://brainly.com/question/29276890

#SPJ1

Nuclear equations, the symbol has two numbers associated to it. The mass number, often called the "A" number, is in the upper right corner.

The complete question is,

Write nuclear equations in what format?

To learn more about nuclear equations refer to:

https://brainly.com/question/28081695

#SPJ1

The molar concentration of Fe(NO3)3 in the stock solution is 0.0634 M, written in scientific notation as 6.34 x 10-2 M.

To calculate the molar concentration of Fe(NO3)3 in the stock solution , you must first calculate the total moles of Fe(NO3)3 present. This can be done by multiplying the volume of Fe(NO3)3 by its concentration. Therefore, the total moles of Fe(NO3)3 present is 10.0 ml x 0.200 M = 2.00 moles.

Next, the total volume of the stock solution must be found. This can be done by adding the volumes of all components, which in this case is 3.0 ml + 10.0 ml + 17.0 ml = 30.0 ml. Finally, the molar concentration of Fe(NO3)3 can be found by dividing the total moles of Fe(NO3)3 by the total volume of the stock solution: 2.00 moles / 30.0 ml = 0.0634 M.

Learn more about molar concentration of Fe(NO3)3:

https://brainly.com/question/14769699

#SPJ4

Difference between the mass in 1 matric ton and 1 english ton is 200 lbs

In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force. The change caused by an applied force is smaller the more mass a body has.

A body's mass is an inherent quality. Before the discovery of the atom and the field of particle physics, it was conventionally thought to be connected to the amount of matter in a physical body.

1 metric ton is 1000 kg = 2.2 * 10³ lbs

1 english ton is 2 * 10³ lbs

Difference between the mass in 1 matric ton and 1 english ton is

(2.2 * 10³ - 2 * 10³) lbs = 2200 - 2000 = 200 lbs

To learn more about Mass refer to :

https://brainly.com/question/29761698

#SPJ1

Answer:

So, there are approximately 2.4 x 10^24 atoms in 11.7 grams of potassium dichromate.

Explanation:

To determine the number of atoms in a given amount of a substance, you can use Avogadro's number, which is approximately 6.022 x 10^23 atoms/mole. To use this number, you first need to know the molar mass of the substance, which is the mass of one mole of the substance in grams.

The molar mass of potassium dichromate is 294.185 g/mol. So, to find the number of moles in 11.7 grams of potassium dichromate, you would divide 11.7 by 294.185. This would give you a value of 0.0399 moles.

To find the number of atoms in 11.7 grams of potassium dichromate, you would then multiply the number of moles (0.0399) by Avogadro's number (6.022 x 10^23 atoms/mole). This would give you a value of 2.4 x 10^24 atoms.

The reaction heat for the following reaction is calculated as follows:

Initial System Enthalpy [1]: (1 mole A x 35 kJ/mole) + (2 moles B x 100 kJ/mole) + (1 mole C x 10 kJ/mole) + (2 moles D x 50 kJ/mole) = 435 kJ/mole

Final System Enthalpy: (2 moles A x 35 kJ/mole) + (2 moles C x 10 kJ/mole) + (2 moles D x 50 kJ/mole) = 280 kJ/mole

Reaction Heat: (Initial System Enthalpy - Final System Enthalpy) / (1 mole A) = 155 kJ/mole

The reaction heat is a measure of the energy released or absorbed during a chemical reaction. It can be calculated by subtracting the initial system enthalpy from the final system enthalpy, and then dividing by the number of moles of the reactant.

This calculation is used to measure the amount of energy released or absorbed during a reaction, which can in turn be used to determine the spontaneity of the reaction.

Learn more about The reaction:

https://brainly.com/question/25996347

#SPJ4

To make 1.50 L of 0.100 M NaCl from a 3.13 M stock solution, you would need to take 0.43L of the stock solution and add 0.00106 mL of water.

To make a stock solution, weigh out an appropriate portion of a pure solid or measure out an appropriate volume of a pure liquid, place it in a suitable flask, and dilute to a known volume.

The precise method of measuring the reagent is find out by the desired concentration unit.

The formula is Cs x Vs = Cd x Vd

Where,

C = concentration, V = volume, s = stock solution, d = dilute solution.

Vs = Cd x Vd / Cs

= .1 M x 1.5 L / 3.48

Vs = .15 / 3.48

= 0.43L

So, your starting volume is .05 L and your dilute solution is 1.5 L, subtract the starting volume to find out how much water was added to make 1.5 L: 1.5 - .0.45 = 1.06 L water

= 0.00106ml

Thus,  you would need to take 0.43L of the stock solution and add 0.00106 mL of water.

To learn more about the stock solution, follow the link;

https://brainly.com/question/25256765

#SPJ1

Answer:

Element X has two isotopes and an average atomic mass of 110.12 amu. One isotope has a mass of 109.82 amu and an abundance of 79.43%. What is the mass of the other isotope?

Infrared is lower frequency than visible light, and ultraviolet is higher frequency. Other forms of energy in the electromagnetic spectrum include radio waves, microwaves, and X-rays.

With a lower frequency than visible light, infrared light lies just beyond the visible light spectrum. The visible light spectrum is immediately preceded by the ultraviolet region, which has a greater frequency.

Gamma rays, X-rays, and radio waves are three other types of energy that can be found in the electromagnetic spectrum. The frequency of gamma rays is the greatest, that of X-rays is between that of gamma rays and that of ultraviolet light, and that of radio waves is the lowest.

These numerous energy types, which are all a part of the electromagnetic spectrum, provide us with a number of opportunities to view and study the cosmos.

To learn more about visible light spectrum refer :

https://brainly.com/question/12732705

#SPJ1

To ensure fire safety, a minimum clear distance of 100 feet must be maintained around an outdoor hazardous materials storage tank, free of any combustible materials or vegetation. So option D is correct.

This requirement for a minimum clear distance of 100 feet around hazardous materials storage tanks is a commonly accepted standard in the industry for fire safety purposes. Keeping the area clear of combustible materials and vegetation helps to prevent fire from spreading to the tank and potentially causing a hazardous release of the stored materials.

This requirement is based on the assumption that a fire spreading from surrounding combustible materials could rapidly increase in intensity and reach the tank, putting personnel and the surrounding community at risk. By maintaining a clear distance of 100 feet, the likelihood of such an event is significantly reduced.

You can learn more about vegetation at

https://brainly.com/question/1129258

#SPJ4

a) The mass of the iron III oxide is 43.2 g

b) The mass of aluminum oxide is 13.77 g

We would need to look at the stoichiometry of the reaction as this would help us to begin to understand how to deal with the question that is at hand here.

Number of moles of the iron = 30.0 g/56 = 0.54 moles

If 1 mole of the iron III oxide produces 2 moles of iron

x moles of the iron III oxide would produce 0.54 moles

x = 0.27 moles

Mass of the iron III oxide = 0.27 moles * 160 g/mol

= 43.2 g

Given that the ratio of the iron and the aluminum oxide is 1:1

1 mole of aluminum oxide is obtained for every 2 moles of iron

x moles of the aluminum oxide is produced for 0.27 moles

x = 0.135 moles

Mass of the aluminum oxide = 0.135 moles * 102 g/mol

= 13.77 g

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

The quantity of grams required per pound of body weight, given the prescription medication, is 0.00385714 g per pound.

You would first need to convert kg to lbs in order to translate the dosage of 8.50 mg per kg of body weight to the number of grams per pound of body weight. A kilogram weighs 2.20462 pounds. To calculate the dosage in mg per pound of body weight, divide the 8.50 mg dose by 2.20462.

= 8.50 mg / 2.20462

= 3.85714 mg per pound

Since 1g = 1, 000mg, we may convert mg to g. Thus, we can multiply 1000 by 3.85714 mg/lb to obtain the dosage in grams per pound.

= 3.85714 mg/lb / 1000

= 0.00385714 grams per pound

Find out more on body weight at https://brainly.com/question/28798122

#SPJ1

The following would you expect to have ionic bonds are csf.

Cesium fluoride is a substance consisting of different types of cesium element and fluoride element. Cesium is a metal and fluoride is a non-metal. Given that one metallic and one non-metallic bond leads mainly to ionic compounds, we expect cesium fluoride to be an ionic compound. But we need to prove this further by finding the difference in electronegativity of the two elements.

According to the electronegativity table, cesium has an electronegativity of 0.7 and fluorine has an electronegativity of 4.0. Therefore, the difference in electronegativity between the two 3,3s is significant enough to transfer electrons between atoms to form ionic compounds. Therefore, the binding of cesium fluoride compounds is ionic.

Read more about ionic bonds;

https://brainly.com/question/13692734

#SPJ4

Answer: .00070 g

Explanation:

Start with what you are given and then use conversion factors to find grams.

1000 mcg = 1 mg

1000 mg = 1 g

700 mcg x (1 mg/1000mcg) x (1 g/1000 mg) = .00070 g