sort these nucleotide building blocks by their name or classification.

Answer:

2.4 mols Be

Explanation:

Use Molar Mass of Be: 9.0g

21.6gBe x 1mol/9.0g = 2.4 mols Be

we cannot determine the exact value of ∆G, but we can say that it decreased as a result of the increase in entropy

The Gibbs free energy change (∆G) is related to the enthalpy change (∆H) and the entropy change (∆S) through the equation:

∆G = ∆H - T∆S

where T is the temperature in Kelvin.

In this case, we know that ∆H = 10 units and ∆S = 12 units. However, we do not know the temperature, so we cannot calculate ∆G exactly.

We can, however, make some general statements about the sign and magnitude of ∆G. Since ∆H is positive (indicating an endothermic reaction) and ∆S is positive (indicating an increase in disorder), the sign of ∆G will depend on the temperature. At low temperatures, the positive ∆H term will dominate, and ∆G will be positive. At high temperatures, the negative T∆S term will dominate, and ∆G will be negative. At some intermediate temperature, ∆G will be zero, and the reaction will be at equilibrium.

Therefore, we cannot determine the exact value of ∆G, but we can say that it decreased as a result of the increase in entropy.

To know more about Gibbs free energy, visit;https://brainly.com/question/20358734

#SPJ4

Ans) d- 1s3

The s- orbital can accommodate up to two electrons. The aforementioned configuration is faulty because there are three "s" electrons, which is not conceivable.

Since there are two electrons, 2s2 is conceivable.

The greatest number of electrons in the d orbital is 10. Thus, 5d9 is also conceivable.

The p orbital can accommodate up to 6 electrons. So 3p4 is also a possibility.

To know more about electron visit:

https://brainly.com/question/1255220

#SPJ1

F-1 would have a larger radius because it has one less electron than F, reducing the electrostatic attraction between the nucleus and electrons, making the atom larger.

The radius of an atom is determined by the distance between the nucleus and the outermost electron shell. The number of electrons in the outermost shell, or valence electrons, determines the size of the atom. In this case, F has 9 electrons in its outermost shell, while F-1 has 8 electrons. With one fewer electron, F-1 has less electrostatic attraction between the nucleus and electrons, and thus a larger radius.Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions. The number of valence electrons an atom has determines its reactivity and how it will bond with other atoms

Learn more about valence electrons here:

https://brainly.com/question/1255220

#SPJ4

The law of mass action is a fundamental principle in chemistry that relates the concentrations of reactants and products in a chemical reaction to the rate of that reaction.

It states that the rate of a chemical reaction is proportional to the product of the concentrations of the reactants, with each concentration raised to a power equal to its stoichiometric coefficient in the balanced chemical equation for the reaction.

For a chemical reaction of the form:

aA + bB ⇌ cC + dD

where A, B, C, and D are the chemical species involved in the reaction, the law of mass action can be expressed as follows:

rate = k [A]²a [B]²b

where k is the rate constant for the reaction, [A] and [B] are the concentrations of the reactants A and B, respectively, and a and b are their stoichiometric coefficients in the balanced chemical equation.

Assuming that both [A] and [B] are kept at constant concentrations, the equation reduces to:

rate = k [A]²a [B]²b = k [A]²a [B]_0²b

where [B]_0 is the initial concentration of B.

Now, let's define x as the concentration of A that has reacted (i.e., the concentration of A that has been consumed in the reaction). Since the reaction is stoichiometrically balanced, we know that the concentration of B that has reacted is b*x/a. Therefore, the concentration of A and B at any given time can be expressed as follows:

[A] = [A]_0 - x

[B] = [B]_0 - b*x/a

Substituting these expressions into the rate equation, we get:

rate = k ([A]_0 - x)²a ([B]_0 - b*x/a)²b

Expanding this expression using the binomial theorem and simplifying, we get:

rate = k [A]_0²a [B]_0²b (1 - ax/[A]_0)²(a-1) (1 - bx/[B]_0)²(b-1)

At low concentrations of x, we can approximate the terms in parentheses using their first-order Taylor series expansions:

(1 - a*x/[A]_0)²(a-1) ≈ 1 - (a-1)*x/[A]_0

(1 - b*x/[B]_0)²(b-1) ≈ 1 - (b-1)*x/[B]_0

Substituting these approximations into the rate equation, we get:

rate ≈ k [A]_0²a [B]_0²b (1 - ax/[A]_0) (1 - bx/[B]_0)

Expanding and simplifying, we get:

rate ≈ k [A]_0²a [B]_0²b - k [A]_0²a [B]_0²b (a/b)x + k [A]_0²a [B]_0²b (a/b)(a-1)/2 * x²2

This is an equation of the form:

rate = A - Bx + Cx²2

where A, B, and C are constants that depend on the reaction conditions. This equation describes a quadratic relationship between the rate of the reaction and the concentration of A that has reacted (i.e., the extent of the reaction).

Learn more about reaction here:

https://brainly.com/question/28984750

#SPJ4

When reaction for the combustion of butyl alcohol is properly balanced the coefficient in front of oxygen is 6.

Butyl alcohol is a hydrocarbon containing the which group as its primary group.

When butyl alcohol reacts with oxygen it gives carbon dioxide and water as a result the balanced chemical reaction equation for the combustion of butyl alcohol is given as,

C₄H₉OH + 6O₂ → 4CO₂ + 5H₂O

As we can see from the above stated chemical equation the efficient of butanol or butyl alcohol is 1, the coefficient of oxygen is 6, the coefficient of carbon dioxide is 4 and the coefficient of water is 5.

So, the answer to our question is 6.

To know more about hydrocarbons, visit,

https://brainly.com/question/3551546

#SPJ4

The total amount of heat required to evaporate hundred gram of liquid Ammonia at its boiling point is found to be 28 KJ.

The enthalpy of vaporization from liquid ammonia is given to be 4.8 kilo joule per mole.

The mass of the liquid ammonia is 100 grams.

The formula to find the amount of heat required to evaporate this ammonia is given by,

Q = nL

Where, m is the moles of ammonia and L is the latent heat of vaporization.

Putting all the values,

Q = 100/17 x 4.8 KJ/mol

Q = 28 KJ

So, a total of 28 kilo joules of energy will be required to evaporate these ammonia.

To know more about heat of vaporization, visit,

https://brainly.com/question/26306578#:~:text=Expert%2DVerified%20Answer&text=The%20heat%20absorbed%20by%20the,vaporize%201%20gram%20of%20liquid.

#SPJ4

The molarity of the 10.0% (by mass) aqueous solution of HCl is  [tex]3.04M[/tex]

The molarity of a 10.0% (by mass) aqueous solution of hydrochloric acid (HCl) can be calculated using the following equation:

Molarity =[tex]\frac{(mass of solute (g)) }{(molar mass of solute (g/mol) * volume of solution (L))}[/tex]

Given that the density of the solution is 1 g/mL, we can calculate the volume of the solution as follows:

Volume of solution (L) =[tex]\frac{Mass of solution (g) }{Density of solution (g/mL)}[/tex]

For a 10.0% (by mass) aqueous solution of hydrochloric acid (HCl), the molar mass of the solute is 36.46 g/mol.

Therefore, the molarity of the 10.0% (by mass) aqueous solution of HCl can be calculated as follows:

Molarity =[tex]\frac{(10 g) }{(36.46 g/mol * 0.01 L)}[/tex]

Molarity = [tex]3.04 M[/tex]

learn more about molarity refer:brainly.com/question/8732513

#SPJ4

complete question:Calculate The Molarity Of A 10.0% (By Mass) Aqueous Solution Of Hydrochloric Acid (HCI). (Density Of Solution Is 1g/ML) : a.3.04 m b.2.74 m c.0.274 m d.4.33 m

It depends on the specific cookie that you are referring to, as the percentage of total grams of carbohydrate that are sugars can vary from cookie to cookie.

The information you provided (6%, 10%, 36%, 55%) does not give enough information to determine the exact percentage of total grams of carbohydrate in the cookie that are sugars. To determine the exact percentage, you would need to consult the nutrition label or ingredient list for the specific cookie in question. The total grams of carbohydrate in a food item refers to the total amount of carbohydrates that are present in that food item. This can include various types of carbohydrates, such as sugars, starches, and fibers. The percentage of total grams of carbohydrate that are sugars specifically refers to the percentage of the total carbohydrates in the food item that are comprised of simple or complex sugars. In order to determine the exact percentage of total grams of carbohydrate in a cookie that are sugars, you would need to consult the nutrition label or ingredient list for that specific cookie. The nutrition label will typically provide information on the total grams of carbohydrate per serving, as well as the grams of sugar per serving. By dividing the grams of sugar by the total grams of carbohydrate, you can determine the percentage of total grams of carbohydrate that are sugars.

To learn more about carbohydrate refer to this link

https://brainly.com/question/14614055

#SPJ4

the electron configuration for calcium can be written as:

1s2 2s2 2p6 3s2 3p6 4s2

The atomic number of calcium is 20, indicating that it has 20 electrons. The ground-state electron configuration for calcium can be written using the following rules: 1s2 2s2 2p6 3s2 3p6 4s2

The first number before each sub-shell indicates the principal quantum number (n), while the letter indicates the type of sub-shell (s, p, d, or f) and the superscript indicates the number of electrons in that sub-shell. Therefore, the electron configuration for calcium can be written as:

1s2 2s2 2p6 3s2 3p6 4s2. Electronic configuration refers to the distribution of electrons in the orbitals of an atom or ion. It describes the arrangement of electrons in the electron shells or energy levels and subshells or orbitals of an atom or ion.

Learn more about  electron configuration here:

https://brainly.com/question/1688387

#SPJ4

The density of oxygen, the efficiency of the nuclear fission process and the density of carbon are the three conversion factor that would used to find the volume of carbon dioxide obtained from 1.5 l of oxygen.

The Nuclear fission is defined as a reaction in which the nucleus of an atom splits into two or more smaller nuclei. The nuclear fission process  produces gamma photons and releases a very large amount of energy even by the energetic standards of radioactive decay. The physical properties and the chemical properties of carbon depend on the crystalline structure of the element. The density of carbon fluctuates from 2.25 g/cm³ for graphite and 3.51 g/cm³ for diamond. The density of oxygen is 1.428 g/L at a standard temperature and pressure. The molar mass of an oxygen atom is 15.9996 grams per mole. The term density is defined by the mass to volume ratio of a substance. Density has the units of g/L or kg/m3. Oxygen is a diatomic gas. It has the bond angle of 180 degree.

To learn more about Nuclear fission please visit:

https://brainly.com/question/3992688

#SPJ4

Option (b) is correct. The hardness of the mineral being tested lies under 2.5 - 3.5. This is according to the Mohs scale of hardness.

Mohs scale of hardness is used as a convenient way to help identify minerals. The hardness of the mineral is a measure of its relative resistance to scratching measured by scratching the mineral against another substance of known hardness on the Mohs Hardness Scale. This method is useful for identifying minerals in the field because you can test minerals against some very common objects such as fingernail, a penny, a nail. This scale is named from its creator, the German geologist and mineralogist Friedrich Mohs. This scale of mineral hardness is a qualitative ordinal scale from 1 to 10 that characterize scratch resistance of minerals through the ability of harder material to scratch softer material.

To learn more about Mohs scale of hardness please visit:

https://brainly.com/question/1585664

#SPJ4

The complete question is,

If we find that a mineral can leave a deep scratch in glass, what is the hardness of the mineral being tested?

(a) <2.5

(b) 2.5-3.5

(c) 3.5-4.5

(d) 4.5-5.5

(e) >5.5

A balanced cone on its small end is in inconsistent equilibrium. Equilibrium refers to a state of balance where an object isn't accelerating or changing its stir.

An object can be in one of three types of equilibrium stable, neutral, or unstable. In stable equilibrium, an object that's displaced from its position will witness a restoring force that brings it back to its original position. For illustration, a ball at the bottom of a coliseum is in stable equilibrium because if it's displaced from its position, graveness will beget it to roll back to the bottom of the coliseum. In neutral equilibrium, an object that's displaced from its position will remain in its new position. For illustration, a ball balanced at the top of a hill is in neutral equilibrium because if it's displaced from its position, it'll remain at its new position and not roll back to the top of the hill. In unstable equilibrium, an object that's displaced from its position will witness a force that will move it further down from its original position. For illustration, a cone balanced on its small end is in unstable equilibrium because if it's displaced from its position, it'll fall over and move further down from its original position. thus, a cone balanced on its small end is in unstable equilibrium.

learn more about equilibrium here:

https://brainly.com/question/28527601

#SPJ4

A cone balanced on its small end is in stable equilibrium. In stable equilibrium, an object is in a balanced state where any slight disturbance will cause the object to return to its original position.

This is because the center of gravity of the cone is located directly above its base, creating a low center of gravity.

To understand this concept, imagine a cone standing on its small end. The base of the cone provides a wide and stable support. The center of gravity, which is the point where the weight of the cone is concentrated, is located directly above the base. This means that any slight tilt or disturbance to the cone will result in the center of gravity moving to a lower position, causing the cone to return to its original upright position.

In contrast, if the cone were balanced on its large end, it would be in an unstable equilibrium. In this case, the center of gravity is located above the narrow top of the cone, making it easy for the cone to topple over with even a slight disturbance. This is because the center of gravity is higher than the base, making the cone top-heavy.

Therefore, a cone balanced on its small end is an example of stable equilibrium.

To learn more about equilibrium, refer below:

https://brainly.com/question/30694482

#SPJ11

For each of the gas-phase reactions given, the rate expressions are based on the appearance of each product or disappearance of each reactant.

For the reaction 2H2O(g)→2H2(g)+O2(g), the rate expressions are:

1.rate = -Δ[H2]/Δt

2.rate = -Δ[H2O]/Δt

3.rate = Δ[O2]/Δt

In this equation, the negative sign is used to denote the disappearance of the reactants, while the positive sign denotes the appearance of the products. The rate expression for this reaction shows the relationship between the change in concentration of each reactant or product to the rate of the reaction.

For the reaction 2SO2(g)+O2(g)→2SO3(g), the rate expressions are:

1.rate =  Î”[SO3]/Δt

2.rate = -Δ[SO2]/Δt

3.rate = -Δ[O2]/Δt

The negative sign is used to denote the disappearance of the reactants, while the positive sign denotes the appearance of the products. The rate expression for this reaction shows the relationship between the change in concentration of each reactant or product to the rate of the reaction.

For the reaction 2NO(g)+2H2(g)→N2(g)+2H2O(g), the rate expressions are: 1.rate =  Î”[N2]/Δt 2.rate =  Î”[H2O]/Δt 3.rate = -Δ[H2]/Δt rate = -Δ[NO]/Δt

The negative sign is used to denote the disappearance of the reactants, while the positive sign denotes the appearance of the products. The rate expression for this reaction shows the relationship between the change in concentration of each reactant or product to the

1.rate = -2 Δ[H2]/Δt

2.rate = 1 Δ[N2H4]/Δt

3.rate = -1 Δ[N2]/Δt

To know more about gas-phase reactions  click here:

brainly.com/question/29767119

#SPJ4

Answer:

The formula for tetraphosphorus decoxide is P4O10.

Explanation:

The size of a sample can affect the melting point measurement by either increasing or decreasing the observed melting point.

A larger sample size can lead to a broader melting range due to uneven heating, while a smaller sample size can result in a higher melting point due to surface effects.
The rate of heating can also affect the melting point measurement. A slow heating rate can result in a lower melting point due to partial decomposition, while a rapid heating rate can lead to a higher melting point due to kinetic factors.

The degree of chemical purity of a substance can affect the melting point measurement by increasing the observed melting point and narrowing the melting range. Impurities can lower the melting point and broaden the melting range due to eutectic effects.

Learn more about melting point measurement here:

https://brainly.com/question/29663243

#SPJ4

The reactant within the smaller number of moles isn't always the limiting reactant.

The limiting reactant is the one that gets used up first in a chemical reaction and determines the amount of product that can be formed. The reactant that is present in the smaller number of moles may or may not be the limiting reactant, depending on its stoichiometric ratio with the other reactant(s) and the actual amounts of each reactant present in the reaction.

To determine the limiting reactant, you need to compare the stoichiometric ratios of all the reactants and calculate the amount of product that each reactant could potentially produce. The reactant that produces the least amount of product is the limiting reactant.

Learn more about reactant on:

https://brainly.com/question/6421464

#SPJ1

The density of pure iron is 7.874 g/cm³. The mass in grams of a piece of iron with a volume of 20.00 cm³ is 157.48 g.

The density of the pure iron = 7.874 g/cm³

The volume of the iron = 20.00 cm³

The expression for density is as :

Density = mass / volume

Mass = density × volume

Where

Density = 7.874 g/cm³

Volume = 20.00 cm³

Mass = 7.874 g/cm³ × 20.00 cm³

Mass = 157.48 g

Thus, the mass of the piece of the iron is 157.48 with the volume of the iron is 20.00 cm³ .

To learn more about density here

https://brainly.com/question/30635626

#SPJ4

Answer:

Pressure reversal

Explanation:

heat transferred into the system is equal to the work done on the system by the surroundings. If we plot an isothermal process on the xy plane, we see that as the pressure increases, the volume will decrease and as the pressure decreases, the volume will increase.

Phase changes involving an increase in the degree of molecular disorder typically correspond to an increase in entropy.

Conversely, phase changes that decrease the degree of molecular disorder are associated with a decrease in entropy.
At a given temperature and pressure, the sequence of phase changes that represents an increase in the degree of molecular disorder is:
solid → liquid → gas
Therefore, the sequence of phase changes that represents a decrease in the degree of molecular disorder, and hence a decrease in entropy, is:
gas → liquid → solid
For example, when water vapor condenses to form liquid water, the degree of molecular disorder decreases, and hence entropy decreases.
in some cases, the phase change from a gas to a solid may bypass the liquid phase altogether, as in the case of deposition, where a gas transforms directly into a solid.

Learn more about entropy and phase changes here:

https://brainly.com/question/16718133

#SPJ4

In order to produce 2.3 moles of carbon dioxide (CO₂), you would need to consume 7.9 moles of glucose. This is because in the chemical equation for respiration, glucose reacts with oxygen to form carbon dioxide and water: C6H12O6 + 6O2 → 6CO2 + 6H2O.

The pH values after the given volumes of acid have been added are: a) 12.18, b) 12.39, c) 11.78, d) 11.25, and e) 10.79.

To solve the problem, we need to use the balanced chemical equation for the reaction between KOH and HClO4:

KOH + HClO4 -> KClO4 + H2O

At the start of the titration, before any HClO4 has been added, we have a solution of KOH with a concentration of 0.150 M. We can use this concentration to calculate the initial concentration of hydroxide ions in the solution:

[OH-] = 0.150 M

a) Before any HClO4 has been added, the volume of the solution is 20.0 mL. At this point, no HClO4 has reacted with the KOH, so the concentration of OH- ions is still 0.150 M. To calculate the pH, we can use the formula for the dissociation constant of water:

Kw = [H+][OH-] = 1.0 x 10^-14

pH = -log[H+]

[H+] = Kw/[OH-] = 6.67 x 10^-13 M

pH = -log(6.67 x 10^-13) = 12.18

b) After 1.5 mL of HClO4 has been added, the volume of the solution is 21.5 mL. The moles of HClO4 added is:

0.125 mol/L x 0.0015 L = 1.875 x 10^-5 mol

The moles of KOH initially in the solution is:

0.150 mol/L x 0.020 L = 0.003 mol

Thus, the moles of KOH remaining after reaction with HClO4 is:

0.003 mol - 1.875 x 10^-5 mol = 0.00298125 mol

The total volume of the solution is 21.5 mL, so the new concentration of KOH is:

0.00298125 mol / 0.0215 L = 0.1387 M

Using this concentration, we can calculate the concentration of OH- ions:[OH-] = 0.1387 M

Using the same formula for Kw and pH as before, we find that:

[H+] = 4.06 x 10^-13 M

pH = -log(4.06 x 10^-13) = 12.39

c) Repeating the above process for a volume of 24.0 mL gives:

[H+] = 1.64 x 10^-12 M

pH = -log(1.64 x 10^-12) = 11.78

d) For a volume of 26.5 mL:

[H+] = 5.67 x 10^-12 M

pH = -log(5.67 x 10^-12) = 11.25

e) For a volume of 29.0 mL:

[H+] = 1.63 x 10^-11 M

pH = -log(1.63 x 10^-11) = 10.79

To learn more about dissociation constant Click here:

brainly.com/question/28197409

#SPJ4

Mg(OH)2's relative formula mass is 58.3.

The weighted average of the masses of the formula units on a scale where the mass of a carbon-12 atom is exactly 12 units is the relative formula mass of a substance. The "formula unit" is just the formula as it appears on paper, such as NaCl, CuSO4, 5H2O, CO2, or Cl2.

One Mg atom, two O atoms, and two H atoms make up the compound Mg(OH).

For Mg, O, and H, the atomic masses are:

Mg: 24.3

O: 16.0

H: 1.0

Mg(OH)2's relative formula mass is thus:

Relative formula mass of Mg(OH)2 = (1 x relative atomic mass of Mg) + (2 x relative atomic mass of O) + (2 x relative atomic mass of H)

= (1 x 24.3) + (2 x 16.0) + (2 x 1.0)

= 24.3 + 32.0 + 2.0

= 58.3

To know more about relative formula visit:-

https://brainly.com/question/13041813

#SPJ1

From the given information, 52.55 grams of ethanol are required to make a 7.1 M solution using 160.0 ml of water.

To determine how many grams of ethanol are required to make a 7.1 M solution using 160.0 ml of water, we first need to calculate the number of moles of ethanol required.

Molarity is defined as moles of solute per liter of solution, so we can use the following formula to calculate the number of moles of ethanol:

Molarity = moles of solute / volume of solution

Rearranging the formula to solve for moles of solute gives:

moles of solute = Molarity x volume of solution

Substituting the values, we get:

moles of ethanol = 7.1 mol/L x (0.160 L) = 1.136 mol

Now we can use the molecular weight of ethanol to convert moles to grams:

molecular weight of ethanol = 46.07 g/mol

mass of ethanol = moles of ethanol x molecular weight of ethanol

mass of ethanol = 1.136 mol x 46.07 g/mol

mass of ethanol = 52.55 g

Learn more about molarity here: brainly.com/question/14469428

#SPJ4

Option C. is a molecule of hydrocarbon.

Hydrocarbons are organic compounds made up of only hydrogen and carbon atoms. They are the building blocks of organic chemistry and are the main component of fossil fuels such as coal, oil, and natural gas.

Molecules of hydrocarbons can be simple or complex, and can exist as gases, liquids, or solids. Some common examples of hydrocarbon molecules include methane (CH₄), ethane (C₂H₆), propane (C₃H₈), and butane (C₄H₁₀). Alkanes, alkenes, and alkynes are all types of hydrocarbons that have different chemical and physical properties based on the arrangement of their atoms.

Therefore, the correct answer is as given above. It could then be concluded that only option C is made up of hydrogen and carbon atoms.

learn more about hydrocarbon: https://brainly.com/question/3551546

#SPJ1

147grams

Hence, The mass of one mole of magnesium nitrate$Mg{(N{O_3})_2}$ is 147grams. Note : The mass of a molecule of a substance is measured in molecular weight, which is dependent on 12 as the atomic weight of carbon-12.

The mass of one mole of magnesium nitrate is 148.3 g/mol. Then the mass of 17 moles of magnesium nitrate is 2521.1 grams.

Any substance containing 6.02 × 10²³ number of its atoms is called one mole of the substance. This number is called Avogadro number. Thus, one mole of every element contains Avogadro number of atoms. The mass of one mole of an element is called its atomic mass.

Similarly one mole of every compounds contains Avogadro number of its molecules. The mass of one mole of a compound is called its molar mass.

Molar mass of magnesium nitrate = 148.3 g/mol

then mass of 17 moles = no.of moles × molar mass.

mass = 17  × 148.3 g/mol  = 2521.2 grams.

Therefore, the mass of 17 moles of magnesium nitrate is 2521.1 grams.

Find more on molar mass:

https://brainly.com/question/22997914

#SPJ2