Answer:
the thickness of the film for destructive interference is 1 cm
Explanation:
We can assume that the radar wave penetrates the layer and is reflected in the inner part of it, giving rise to an interference phenomenon of the two reflected rays, we must be careful that the ray has a phase change when
* the wave passes from the air to the film with a higher refractive index
* the wavelength inside the film changes by the refractive index
λ = λ₀ / n
so the ratio for destructive interference is
2 n t = m λ
t = m λ / 2n
indicate that the wavelength λ = 2 cm, suppose that the interference occurs for m = 1, therefore it is thickness
t = 1 2/2 n
t = 1 / n
where n is the index of refraction of the anti-reflective layer. As they tell us not to take into account the change in wavelength when penetrating the film n = 1
t = 1 cm
So the thickness of the film for destructive interference is 1 cm
Answer:
the thickness of the film for destructive interference is 1 cm
Explanation:
Derive the equation relating the total charge Q that flows through a search coil (Conceptual Example 29.3) to the magnetic-field magnitude B. The search coil has N turns, each with area A, and the flux through the coil is decreased from its initial maximum value to zero in a time Δt. The resistance of the coil is R, and the total charge is Q=IΔt, where I is the average current induced by the change in flux.
Answer:
Q= NBA/R
Explanation:
Check attachment for derivation
The equation relating the total charge, magnitude, turns, time will be "[tex]\frac{NBA}{R}[/tex]".
Magnetic fieldAccording to the question,
Resistance = R
Total charge = Q
Current = I
Number of turns = N
Time = Δt
and,
Q = IΔt ...(equation 1)
We know the flux,
→ [tex]\Phi[/tex] = NBA
Emf induced,
ε = [tex]\frac{- \Delta \Phi}{\Delta t}[/tex]
Δ[tex]\Phi[/tex] = [tex]\Phi_2 - \Phi_1[/tex]
then,
ε = [tex]\frac{NBA}{\Delta t}[/tex]
As we know, Voltage (V) = iR
then, ε = [tex]\frac{NBA}{\Delta t}[/tex] = iR
i = [tex]\frac{NBA}{R \Delta t}[/tex]
Hence, by applying the values in "equation 1"
→ Q = iΔt
= [tex]\frac{NBA}{R \Delta t}[/tex] × Δt
= [tex]\frac{NBA}{R}[/tex]
Thus the response above is correct.
Find out more information magnetic field here:
https://brainly.com/question/14411049
Modified Newtonian dynamics(MoND)proposes that, for small accelerations, Newton’s second law, F = ma, approaches the form F = ma2/a0, where a0 is a constant.
(a) (10 points) Show how such a modified version of Newton’s second law can lead to flat rotation curves, without the need for dark matter.
(b) (10 points) Alternatively, propose a new law of gravitation to replace F = GMm/r2 at distances greater than some characteristic scale r0 so that again, you can explain the observed flat rotation curved of galaxies without dark matter.
Answer:
Explanation:
The two pictures attached here shows the solution to the two questions from the problem. thank you and I hope it helps you
A speaker system is plugged into a 100v socket and 2.5 a of current runs through. Find the power of the system
Answer:
250 Watts
Explanation:
Recall that the formula relating power, current and voltage is
P = IV, where,
P = power (we are asked to find this)
I = 2.5 A
V = 100 V
substituting the above values into the equation:
P = IV
= (2.5)(100)
= 250 Watts
During the process of mountain building, earthquakes sometimes occur along continental-continental convergent boundaries. Which statement best describes the motion of the plates along these boundaries that causes the earthquakes?
The plates push apart from each other with no subduction.
Subduction occurs with the less-dense plate sinking below the other plate.
Subduction occurs with the more-dense plate sinking below the other plate.
The plates smash together with no subduction.
Answer:
The correct answer is The plates smash together with no subduction. I just took this on Edge. Glad I could help!
The statement best describes the motion of the plates along these boundaries that causes the earthquakes is that The plates smash together with no subduction
For better understanding let's explain what the answer means
it is said that the meeting point of two tectonic plates will causea convergent plate boundary to be formed. one of the converging plates will move under the other as it is known as subductionFrom the above we can therefore say that the answer The statement best describes the motion of the plates along these boundaries that causes the earthquakes is that The plates smash together with no subduction, is correct
Learn more motion of the plates along these boundaries from:
https://brainly.com/question/23731885
The answers to the fill in the blank plz
Answer:
not too sure but i think it is : force - multiplied by -mass
A solid cylinder of mass m and radius R rolls down a ramp, starting from rest at a height h above a nearby horizontal surface. The coefficients of kinetic and static friction and are non-zero, and sufficiently large that the cylinder rolls down the ramp without slipping. Assume that the coefficient of rolling friction is zero. As the cylinder leaves the ramp, it continues along a horizontal surface (with the same frictional coefficients as the ramp).
Required:
What is the speed V of the cylinder after it has traveled a distance D along the horizontal surface?
Answer:
the volocity is 50
Explanation:
Calculate potential energy of a 5 kg object sitting on 3 meter ledge
Answer:147 joules
Explanation:
Mass=m=5kg
Acceleration due to gravity=g=9.8m/s^2
Height=h=3 meter
Potential energy=m x g x h
Potential energy=5 x 9.8 x 3
Potential energy=147 joules
The shaft of a motor has an angular displacement θ that is a function of time given by the equation: θ(t) = 4.40 t 3 rad/s3 + 1.40 t2 rad/s2 . At time t = 0.00 s the wheel is at rest and is oriented at θ = 0.00 rad. a) Derive the equation that specifies the angular velocity of the shaft as a function of time. b) Derive the equation that specifies the angular acceleration as a function of time.
Answer:
a) [tex]\omega = 13.2t^2\frac{rad}{s^3}+2.80t\frac{rad}{s^2}[/tex]
b) [tex]\alpha=26.4t\frac{rad}{s^3}+2.80\frac{rad}{s^2}[/tex]
Explanation:
You have that the angular displacement is given by:
[tex]\theta=4.40t^3\frac{rad}{s^3}+1.40t^2\frac{rad}{s^2}[/tex]
a) the angular velocity is given by the derivative in time, of the angular displacement, that is:
[tex]\omega=\frac{d\theta}{dt}=\frac{d}{dt}[4.40 t^3 rad/s^3 + 1.40 t^2 rad/s^2]\\\\\omega=\frac{d\theta}{dt}=13.2t^2\frac{rad}{s^3}+2.80t\frac{rad}{s^2}[/tex]
b) the angular acceleration is the derivative, in time, of the angular velocity:
[tex]\alpha=\frac{d\omega}{dt}=\frac{d}{dt}[13.2t^2\frac{rad}{s^3}+2.80t\frac{rad}{s^2}]\\\\\alpha=26.4t\frac{rad}{s^3}+2.80\frac{rad}{s^2}[/tex]
Block A, with a mass of 4 kg, is moving with a speed of 2 m/s while Block B, with a mass of 8.4 kg, is moving in the opposite direction with a speed of 6.1 m/s. The center of mass of the two block system is moving with a velocity of ____ m/s. Round your answer to the nearest tenth. Assume Block A is moving in the positive direction.
Answer:
The center of mass move with the velocity of -3.487 m/s.
Explanation:
Given values of block A.
Mass of block A, (M1) = 4 kg
Speed of block A, (V1) = 2 m/s
Given values of block B.
Mass of block B, (M2) = 8.4 kg
Speed of block B, (V2) = -6.1 m/s
Below is the formula to find the velocity of center of mass.
[tex]Velocity = \frac{M1V1 + M2V2}{M1 + M2} \\[/tex]
[tex]= \frac{4 \times 2 + 8.4 \times (-6.1) }{4 + 8.4} \\[/tex]
[tex]= \frac{- 43.24}{12.4}\\[/tex]
[tex]= - 3.487 m/s[/tex]
Eclipses of the sun and moon are best explained by which of the following?
The irregular shape of the orbits of Earth and the moon
The rotation of Earth and the moon on their axis
The revolution of Earth and the moon around the sun
The different chemical compositions of the sun and the moon
Answer:
Eclipses of the Sun and Moon are best explained by the revolution of Earth and the Moon around the Sun.
Explanation:
An eclipse is the covering of a star by another celestial body. In everyday language, an eclipse usually means a solar or lunar eclipse.
When the sun, moon and earth are aligned (in this order), the sun is covered by the moon when viewed from a place on earth. The sunlight will then no longer reach the earth. In other words, part of the earth has been eclipsed by the moon. This is referred to as a solar eclipse.
If the earth is between the sun and the moon, and thereby prevents sunlight from reaching the moon, then there is a lunar eclipse. After all, seen from the moon, the earth covers the sun. The moon is then eclipsed by the earth.
If 1 inch = 2.54 centimeters, how many inches are there in 2,540 centimeters?
A. 100 inches
B. 10 inches
C. 1,000 inches
D. 0.10 inches
SUBMIT
A steam engine takes in superheated steam at 270 °C and discharges condensed steam from its cylinder at 50 °C. The engine has an efficiency of 30%, and taken in 50 kJ from the hot steam per cycle. If a Carnot engine takes in the same amount of heat per cycle and operates at these temperatures, the work it can turn into is most likely to be:a) 15 kJ. b) 20 kJ. c) 10 kJ. d) 50 kJ.
Answer:
b) 20 kJ
Explanation:
Efficiency of carnot engine = (T₁ - T₂ ) / T₁ Where T₁ is temperature of hot source and T₂ is temperature of sink .
T₁ = 270 + 273 = 543K
T₂ = 50 + 273 = 323 K
Putting the given values of temperatures
efficiency = (543 - 323) / 543
= .405
heat input = 50 KJ
efficiency = output work / input heat energy
.405 = output work / 50
output work = 20.25 KJ.
= 20 KJ .
a washing machine uses 750 watts of power and costs $0.15 per kilowatt-hour. How much does it cost to run a washing machine for two hours? Round your answer to the nearest cent.
Answer:$0.1125
Explanation:
power=750 watts
Power=750/1000=0.75 kilowatts
$0.15 for 1 kilowatts-hour
$h for 0.75 kilowatts-hour
$h=(0.75 x 0.15)
$h=$0.1125
Answer: 0.23
Explanation:
this is the correct answer on edg
Dogs keep themselves cool by panting, rapidly breathing air in and out. Panting results in evaporation from moist tissues of the airway and lungs, which cools the animal. Measurements show that, on a 35∘C day with a relative humidity of 50%, a 12 kg dog loses 1.0 g of water per minute if it is panting vigorously. What rate of heat loss, in watts, does this achieve?
The rate of heat loss, in watts, does this achieve is 37.66 W
Evaporation:It leads in cooling since water absorbs heat equivalent to mass times latent heat of evaporation to get converted into vapor .
So,
latent heat of evaporation of water = 2260 x 10³ J / kg or 2260 J / g
Now
in the evaporation of 1 g of water , heat lost = 2260 J
And,
heat lost per minute = 2260 J
So,
heat lost per second = 2260 / 60
= 37.66 J /s
= 37.66 W
Learn more about heat here: https://brainly.com/question/9636950
8. At temperature 15°C, aluminum rivets have a diameter of 0.501 cm, and holes drilled in a titanium sheet have a diameter of 0.500 cm. If both the aluminum rivets and the titanium sheet are cooled together, at what temperature will the rivets just fit into the appropriate holes in the titanium sheet? Use 25x10-6 (°C)-1 for the coefficient of linear expansion for aluminum, and 8.5x10-6 (°C)-1 for titanium
Answer:
The temperature is [tex]T = -106 ^oC[/tex]
Explanation:
From the question we are told that
The temperature is [tex]T_1 = T_t= T_a=15^oC[/tex]
The diameter is [tex]d_1 = 0.5001 cm[/tex]
The diameter of the hole [tex]d_2 = 0.500 \ cm[/tex]
The coefficient of linear expansion for aluminum is [tex]\alpha _1 = 25 *10^{-6} \ ^oC^{-1}[/tex]
The coefficient of linear expansion for titanium is [tex]\alpha _2 = 8.5 *10^{-6} \ ^o C^{-1}[/tex]
According to the law of linear expansion
[tex]d = d_o (1 + \alpha \Delta T )[/tex]
Where [tex]d_o[/tex] represents the original diameter
So for aluminum
[tex]d_a = d_1 (1 + \alpha_1 (T- T_a) )[/tex]
Where [tex]d_a[/tex] is the new diameter of aluminum
[tex]T_a[/tex] is the new temperature of the aluminum
So for titanium
[tex]d_t = d_2 (1 + \alpha_1 (T- T_t) )[/tex]
Where [tex]d_t[/tex] is the new diameter of titanium
[tex]T_t[/tex] is the new temperature of the aluminum
So for the aluminum rivets to fit into the holes
[tex]d_a = d_t[/tex]
=> [tex]d_1 (1 + \alpha_1 (T- T_a) ) = d_2 (1 + \alpha_2 (T- T_t) )[/tex]
Making T the subject of the formula
[tex]T = \frac{(d_1 - d_2 ) + (d_2 *\alpha_2 T_t) - d_1 \alpha_1 * T_a }{d_2 \alpha_2 - d_1 \alpha_1 }[/tex]
Substituting values
[tex]T = \frac{(0.501 - 0.500 ) + (0.500 *(8.5*10^{-6}) * 15) - 0.500* (25*10^{-6}) * 15 }{0.500 * (8.5 *10^{-6}) - 0.501 * (25 *10^{-6}) }[/tex]
[tex]T = -106 ^oC[/tex]
In our usual coordinate system( +x to the right, +y up (away from the center of the Earth), +z out of the page toward you), what is the vector gravitational force on a 31 kg object sitting on the ground? (From the momentum principle you can conclude that a force of the same magnitude is exerted upward by the ground on the object if the momentum isn't changing. In Chapter 4 we'll see more about the origin of this force.)
Answer:
The vector gravitational force is [tex]W = 303.8\ N( -y)[/tex]
Explanation:
From the question we are told that
The mass of the object is [tex]m = 31 \ kg[/tex]
The acceleration due to gravity experienced by the object is [tex]g = 9.8 m/s^2[/tex]
Generally the vector gravitational force on the object is mathematically represented as
[tex]W = 31 * 9.8[/tex]
[tex]W = 303.8\ N (-y)[/tex]
The -y indicates that the direction of the force is towards the center of the earth
Describe at least two different objects that you think are magnetic and why do you think this objects are magnetic
Answer:
Magnetic letters Screws and bolts
Explanation:Magnetic letters have to be magnetic so they can stick to things like walls and fridges. Screws and bolts are magnetic becaus they become easier to to screw onto things since the tool that you use to screw it in is also magnetic.
Answer:
File cabins and nails/screw,
Explanation:
Because they are ferromagnetic this means that they can be magnetized. Magnetic objects are made of metal and metals do attract magnet.
A ball with a mass of 4 kg is initially traveling at 2 m/s and has a 5 N force applied for 3 s. What is the initial momentum of the ball?
Answer:
The initial momentum of the ball is 8 kg-m/s.
Explanation:
Given that,
Mass of the ball is 4 kg
Initial speed of the ball is 2 m/s
Force applied to the ball is 5 N for 3 seconds
It is required to find the initial momentum of the ball. Initial momentum means that the product of mass and initial velocity of the ball. It is given as :
[tex]p_i=mu\\\\p_i=4\ kg\times 2\ m/s\\\\p_i=8\ kg-m/s[/tex]
So, the initial momentum of the ball is 8 kg-m/s.
A 0.009 kg bullet fired through a door enters at 803 m/s and leaves at 617 m/s. If the door material is known to exert an average resistive force of 5620 N on bullets of this type at usual speeds, find the thickness of the door.
Answer:
The thickness of the door is 0.4230 m
Explanation:
Given;
mass of bullet, m = 0.009 kg
initial velocity of the bullet, u = 803 m/s
final velocity of the bullet, v = 617 m/s
average resistive force of the door on the bullet, F = 5620 N
Apply Newton's second law of motion;
Force exerted by the door on the bullet = Force of the moving bullet
F = ma
where;
F is applied force
m is mass
a is acceleration
Also, Force exerted by the door on the bullet = Force of the moving bullet
[tex]F =ma, \ But \ a =\frac{dv}{dt} = \frac{u-v}{t} \\\\F = \frac{m(u-v)}{t}[/tex]
where;
v is the final velocity of the bullet
u is initial velocity of the bullet
t is time
We need to calculate the time spent by the bullet before it passes through the door.
[tex]t = \frac{m(u-v)}{F} \\\\t = \frac{0.009(803-617)}{5620} = 0.0002979 \ s[/tex]
Distance traveled by the bullet within this time period = thickness of the door
This distance is equivalent to the product of average velocity and time
[tex]S = (\frac{u+v}{2}) t[/tex]
where;
s is the distance traveled
[tex]S = (\frac{u+v}{2}) t\\\\S = (\frac{803+617}{2}) 0.0002979\\\\S = 0.4230 \ m[/tex]
Therefore, the thickness of the door is 0.4230 m
c. is what percent of 125?
Answer:
Step 1: We make the assumption that 125 is 100% since it is our output value.
Step 2: We next represent the value we seek with $x$.
Step 3: From step 1, it follows that $100\%=125$.
Step 4: In the same vein, $x\%=125$.
Step 5: This gives us a pair of simple equations:
$100\%=125(1)$.
Explanation:
It takes four hydrogen nuclei to create one helium nucleus in the proton–proton chain, which is the main energy source of the Sun. If a single hydrogen nucleus has a mass of 1.6726×10−27 kg and a single helium nucleus has a mass of 6.6447×10−27 kg , how much mass is converted into energy to create three helium nuclei?
Answer:
0.1371 * 10 ^ -27 kg
Explanation:
From the question number of hydrogen nuclei used to form 3 Helium nuclei = 12 ( 4 * 3 )
mass of the 12 hydrogen nuclei = 12 *( 1.6726 *10^-27) = 20.0712 * 10 ^-27
mass of single helium = 6.6447 * 10 ^-27 kg
therefore the mass of the 3 helium = 3 *( 6.6447 *10 ^-27) = 19.9341 * 10 ^-27 kg
The mass difference between the hydrogen and the helium used
= (20.0712 * 10^ -27) - (19.9341 * 10 ^-27) = 0.1371 * 10 ^ -27 kg
therefore 0.1371 * 10^-27 kg is converted into energy to create the three helium nuclei
Which of the following statements are true? a. Kinematics is the science that studies forces and motion of particles and bodies. b. Speed is a vector quantity. c. The units of velocity are length divided by time. d. The term deceleration is commonly used to describe a negative acceleration.
Answer:
true. b, c and d
Explanation:
Let's review each statement separately
a) False. The kinematics studies the position, speed and acceleration of the bodies, but not what causes these changes
b) True. Velocity is the displacement between time, displacement is a vector, and time is a scalar, so the division between them gives a vector
c) True. speed is the displacement that is a length between time, so its unit is length / time
d) true desaceleration = - aceleration
g science is strictly limited to the study of natural phenomena (things that result as the outcome of natural laws like the speed of light. What is an example of a question that scientific studies cannot address? Question 3 options: 1) What is the purpose of life? 2) Where did an important battle take place? 3) What is the mean flight speed velocity of a sparrow? 4) How much energy is stored in a particular kind of covalent
Answer:
1) What is the purpose of life
Explanation:
This is an age long question that arises out of human curiosity about the beginning, existence and subsequently what happens to life after its gone. There exist no natural laws or methods currently that addresses this question.
A plane electromagnetic wave varies sinusoidally at 90.0 MHz as it travels along the x direction. The peak value of the electric field is 200 V/m, and it is directed along the y direction. Find the wavelength, the period and the maximum value of the magnetic field. Write expressions in SI units for the space and time variations of the electric field and of the magnetic field. Include numerical values, and include subscripts to indicate coordinate directions. Find the average power per unit area that this wave propagates through space.
Answer:
Explanation:
frequency n = 90 x 10⁶ Hz .
time period T = 1 / n
= 1 / 90 x 10⁶
= 1.11 x 10⁻⁸ S.
wavelength = velocity of light / frequency
= 3 x 10⁸ / 90 x 10⁶
= 3.33 m
maximum value of the magnetic field. ( B₀ )
E₀ / B₀ = c where E₀ and B₀ are maximum electric and magnetic field .
E₀ / c= B₀
200/ 3 x 10⁸
= 66.67 x 10⁻⁸ T .
expressions in SI units for the space and time variations of the electric field
[tex]E=E_{0y}sin(2\pi nt - \frac{2\pi x}{\lambda} )[/tex]
[tex]E=200sin(180\times 10^6\pi t - \frac{2\pi x}{\lambda} )[/tex] N/C
[tex]B=B_{0z}sin(2\pi nt - \frac{2\pi x}{\lambda} )[/tex]
[tex]B=66.67\times 10^{-8}sin(180\times 10^6\pi t - \frac{2\pi x}{\lambda} )[/tex] T
what do hydroelectric plants use to generate electrical energy?
Answer:
A. falling water
Explanation:
I got it right on Edgenuity. Good luck on your quiz.
In hydroelectric plants, water falls on turbine and makes it rotate. In generator, this mechanical energy transforms into electrical energy.
What is hydroelectric power?Hydroelectric power is generated by turbines that turn the potential energy of falling or swiftly flowing water into mechanical energy, which is then used to power generators. The most popular renewable energy source in the early 21st century was hydroelectricity, which in 2019 accounted for more than 18% of the world's total power producing capacity.
Water is gathered or stored at a higher elevation during the production of hydroelectric power and then transported through substantial pipes or tunnels (penstocks) to a lower elevation; the difference between these two elevations is referred to as the head. The falling water turns turbines as it nears the bottom of the pipelines. In turn, the turbines power generators, which transfer the mechanical energy of the turbines into electricity.
Learn more about hydroelectric power here:
https://brainly.com/question/15228003
#SPJ2
Help ill give you brainliest !!!
Answer:
1. B
2. A
3. C
4. B
5. A
6. Muscular strength is different than muscular endurance because of the fact that muscular strength is the amount of force that can be exerted in one instance. Muscular endurance is how long that you can exert that force without being completely exhausted.
7. Some benefits to strength training is the increase in muscular endurance. There is also the benefit of better muscular strength.
Explanation:
In this circuit the battery provides 3 V, the resistance R1 is 7 Ω, and R2 is 5 Ω. What is the current through resistor R2? Give your answer in units of Amps. An Amp is 1 Coulomb of charge flowing through a cross-sectional area of the wire per second - that's a lot of charge per second and will warm up a typical wire quite a bit! Most devices have circuits with larger resistors - kLaTeX: \OmegaΩ (103 LaTeX: \OmegaΩ) and MLaTeX: \OmegaΩ (106 LaTeX: \OmegaΩ) are common.
Answer:
The current pass the [tex]R_2[/tex] is [tex]I = 0.25 A[/tex]
Explanation:
The diagram for this question is shown on the first uploaded image
From the question we are told that
The voltage is [tex]V = 3V[/tex]
The first resistance is [tex]R_1 = 7 \Omega[/tex]
The second resistance is [tex]R_2 = 5 \Omega[/tex]
Since the resistors are connected in series their equivalent resistance is
[tex]R_{eq} = R_1 +R_2[/tex]
Substituting values
[tex]R_{eq} = 7 + 5[/tex]
[tex]R_{eq} = 12 \Omega[/tex]
Since the resistance are connected in serie the current passing through the circuit is the same current passing through [tex]R_2[/tex] which is mathematically evaluated as
[tex]I = \frac{V}{R_{eq}}[/tex]
Substituting values
[tex]I = \frac{3}{12}[/tex]
[tex]I = 0.25 A[/tex]
Can a moving object have gravitational energy?
Answer:
It is worth noting that the higher the gravitational energy of an object moving downwards, the lower the kinetic energy, and the lower the kinetic energy of an object moving upwards, the higher its gravitational energy.
Gravitational potential energy is acquired by an object when it has been moved against a gravitational field. For example, an object raised above the surface of the Earth will gain energy, which is released if the object is allowed to fall back to the ground.
A rectangular painting measures 1.0 m tall along the y' axis and 3.0 m wide along the
x' axis. The painting is hung on the side wall of a spaceship which is moving passed
the Earth at a speed of 0.9c. Assume that the spaceship is moving along the (x, x')
direction.
a) What are the dimensions of the picture according to the captain of the
spaceship?
b) What are the dimensions of the picture as seen by an observer on the Earth?
Answer:
a) 1 m tall, 3 m wide
b) 1 m tall, 1.31 m wide
Explanation:
According to the captain of the spaceship, the dimensions of the picture is the same i.e 1.0 m tall along the y' axis and 3.0 m wide along the x' axis.
b) The dimensions of the picture as seen by an observer on the Earth along the y axis will remain the same, 1.0 m tall, for the direction of the y axis is perpendicular to the spaceship movement.
The dimensions of the picture as seen by an observer on the Earth along the x axis will reduce if we are to go by the Lorentz contraction:
L(x) = L(x)' * √[1 - (v²/c²)]
where
L(x)' = the dimensions of the picture along the x axis on the spaceship,
v² = the speed of the spaceship and c² = the speed of light in the vacuum.
On substituting, we have
L(x) = 3 * √[1 - (0.81c²/c²)]
L(x) = 1.31 m
In Excel, you can sort a table by one or more columns by.
Answer:
fthfj
Explanation:
