The net force required to move the object of mass 15 kg and constant velocity is 0N
The mass of the object = 15 kg
The object is moving with a constant velocity = 3 m/s.
The net force required to move the object can be calculated by using the formula,
F = ma
where F is the force
m is the mass
a is the acceleration.
The acceleration is nothing but a rate of change of velocity (i.e. a = v/t). But for a constant velocity, the acceleration will be zero. Because there will be no change in velocity.
Therefore, the net force is
F = 15 x 0
= 0 N
Therefore, the net force is 0 N
Learn more about the force in
https://brainly.com/question/1046166
#SPJ4
for an elastic collision, why do the carts start interacting even though they never physically touch?
An example of a collision without physical contact is a charged particle being deflected by another charged particle as they travel by one another.
Another illustration is a gravitational slingshot, in which a light object moves around a much heavier object to accelerate. A collision does not require the objects to actually touch; for instance, an asteroid passing by the earth is seen as one since its course is altered by the gravitational pull of the planet. The conservation of momentum and energy can still be used to assess the collision. Yes, even without direct touch, an accident may still occur.
Learn more about to physically touch visit here:
https://brainly.com/question/27275597
#SPJ4
3 points
A net force of 9,079 N is applied to a car having a mass of 1,447 kg. Find the acceleration of the car.
Type your answer...
Previous
Answer:
a = 6.27 m/s² - acceleration
Explanation:
Given:
F = 9 079 N
m = 1 447 kg
_________
a - ?
Acceleration:
a = F / m
a = 9 079 / 1 447 ≈ 6.27 m/s²
Which of the following graphs represent an object at rest? (There could be more than one correct cho 0' 0' 0 0 graph a graph b graph c graph d
Graph A, because distance-time graph is a straight line parallel to the time-axis because the position of the object does not change when it is at rest.
Distance is the length between two points or items, and it is directionless. Since distance is a scalar attribute, it only takes into account the overall magnitude and ignores the start and end locations. Being a scalar attribute, distance may only be positive or zero; it cannot be the opposite.
Although kilometers (km) and centimeters (cm) or millimeters (mm) can also be used to express shorter distances, the meter (m) is the most used unit of measurement for distance (mm). When calculating distance, the letter D is usually used to denote the distance traveled.
To know more about distance visit : brainly.com/question/12626613
#SPJ4
a figure skater rotating on one spot with both arms and one leg extended has moment of inertia ii . she then pulls in her arms and the extended leg, reducing her moment of inertia to 0.75 ii . what is the ratio of her final to initial kinetic energy?
The ratio of her final to initial kinetic energy is 1.33
What is conservation of angular momentum?
Conservation of angular momentum is a principle in physics according to which the total angular momentum of a system remains constant as it is free from external torque irrespective of all the various types of interaction and transformation taking place within the system. It is a physical property of spinning system. The easiest example of conservation of angular momentum is Earth spinning around at the same rate from last billions of years.
Iiwi = Ifwf
Where Ii = Initial Angular momentum
If = Final Angular momentum
wi= initial angular velocity
wf = final angular velocity
wf= Iiwi / If
= Iiwi/ 0.75 Ii
= 1.33 wi
Ki= ½ = Iiwi2
Kf= ½ (0.75) Ii (1.33 wi)2
= 1.33 Ki
Kf/ Ki = 1.33 Ki/ Ki
= 1.33
To know more about angular momentum, click on the following link
https://brainly.com/question/7538238
#SPJ1
a satellite of mass 1000 kg is in a circular orbit around a planet. the centripetal acceleration of the satellite in its orbit is 5 ms2. what is the gravitational force exerted on the satellite by the planet?
The gravitational force exerted on the satellite of mass 1000 kg moving in a circular orbit with a centripetal acceleration of 5 m/s² by the planet is 5000 N (option C). The, the force acting on the satellite is: Therefore, the gravitational force exerted on the satellite by the planet is 5000 N (option C).
f
An influence that can alter an object's motion is called a force. A mass-containing object's velocity can change, or accelerate, as a result of a force. Intuitively, a push or a pull can also be used to describe force. Being a vector quantity, a force has both magnitude and direction. The rate at which an object's velocity with respect to time changes is called its acceleration. Vector quantities include accelerations. The direction of the net force acting on an object provides information about its acceleration.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ4
when a star settles down to a stable existence as a main-sequence star, what characteristics determines where on the main sequence in an h-r diagram the star will fall?
A star's mass determines where it lies along the main sequence. On the main sequence, high-mass stars are hotter and emit more energy than low-mass stars.
Explain about the Mass?A metric called mass is employed in physics to express inertia, a basic property of all matter. What it essentially is is the resistance of a mass of matter to changing its direction or speed in response to the application of a force. The more mass a body has, the less of a change an applied force makes.
Mass is a unit used to describe how much matter is present in an object. Usually, the unit of mass is either kilogrammes (kg) or grammes (g) (kg). Mass is a measure of how much matter there is, regardless of where it is in the cosmos or how much gravitational force is being applied to it.
To learn more about Mass refer to:
https://brainly.com/question/19385703
#SPJ4
when the top 2 waves are added together, the result is the bottom wave. the bottom wave is an example of
When two waves collide while moving across the same medium, wave interference is the result.
What happens when 2 waves meet?When two waves collide, they cause each other's displacement to change, creating a totally new wave in the process. The amplitude of the resulting wave at each point is determined by adding the amplitudes of each wave, according to the principle of superposition.Sound waves interact when they share a space with one another.The waves pass through each other instead than off of one another. Depending on how the waves align, a wave will result.The two waves will combine into a temporary, larger wave with an amplitude equal to the sum of their individual amplitudes if their crests and troughs completely line up. Constructive interference is what this is.To Learn more About wave interference refer to :
https://brainly.com/question/9655287
#SPJ4
Body systems work together to perform all the functions necessary for the survival of
An organism
C. Explain why the failure of one organ or organ
system can affect the function of other body
systems in an organism.
Explanation:
Body systems work together to perform all the functions necessary for the survival of
An organism
C. Explain why the failure of one organ or organ
system can affect the function of other body
systems in an organism.
An astronomical telescope is used to view distant stars. How does the angle between the just-resolvable light from two stars differ if the average light from the stars is red or if it is blue?.
With an astronomical telescope, the angle of just resolution light from two stars would be greater if the light of the average star is red or if it is blue.
What is an astronomical telescope?
An astronomical telescope consists of two lenses: objective and eyepiece.
The objective lens forms the image of a far off object at focal point while eyepiece lens just magnifies the image and make it look more clear, visible and magnified.
The formula D = 1.22λ/dФ is used to find the value of aperture of the telescope.
In general, an astronomical telescope is used to view distant stars. Thus, the angle formed would be greater if the light emitted by the average stars is red or blue.
If you need to learn more about astronomical telescope click here:
https://brainly.com/question/15232340
#SPJ4
100 POINTS!! 1. Calculate the current flowing when:
(A) 75 mC pass a point in I min;
(B) 0.5 GC pass a point in 2 hours;
(C) 2.0 MC pass a point in 1000 hours.
2. Calculate the charge flow when the current flow is:
(A) 6.0 A for 5 min;
(B) 250 mA for 4 hours;
(C) 2.5 KA for 50 s.
3. How long does it take for the following to pass a point in the circuit?
(A) 25 MC at a current of 25 mA;
(B) 48 C at a current of 12 A;
(C) 360 C at a current of 4.0 A.
4. A current of 10 cA flows through a resistor of resistance 4.0 ohms
Find the:
(a) P.d across the resistor;
(b) Total charge flow in 3 minutes;
Current ( I ) = charge(Q) * time(t)
(A) I = 75/1000 * 1*60 = 4.5A
(B) I = 0.5*10^9 * 2*60*60 = 3.6*10^12 A
(C) I = 2*10^-6*1000*60*60 =0.55 A
2) Q = I/t
( A) Q = 6/5*60 = 0.02 C
( B) Q = 250*1000/ 4*60*60 = 17.36 C
( C) Q = 2.5/1000*50 = 5*10^-5 C
3 ) t = I/C
(A) t =25*1000/ 25*10^-6 = 1*10^9 s
(B) t = 12/48 = 0.25 s
(C) t = 4/360 = 0.011 s
4 )
( A) P . d = current * resistance = 10/100 * 4= 0.4V
( B) charge = 10*10^-2/3*60 = 5.55*10^-4 C
What is charge ?
Charge, also known as electric charge, electrical charge, or electrostatic charge and denoted by the symbol q, is a property of a unit of matter that indicates how many more or fewer electrons than protons it contains.
The physical characteristic of matter that causes it to feel a force when exposed to an electromagnetic field is called electric charge. The two types of electric charges that protons and electrons most frequently carry are positive and negative charges.
To know about charge from the link
https://brainly.com/question/18102056
#SPJ1
The parachutist’s mass is 70kg. The plane is 12km above the ground. How much GPE does the parachutist have?
Answer:
8.2x10^2 Joules
Explanation:
Assuming that GPE means potential energy of the parachutist, and he/she is doing this on Earth, we can find their potential energy, (PE) with the equation:
PE = mgh, where m is the mass of the parachutist in kilograms, g is the acceleration due to gravity [9.8 m/s2 for Earth (near surface)] and h is the height in meters.
m = 9.8 m/s^2
h = 12,000 meters (12 km)
m = 70 kg
PE = (70kg)(9.8 m/s^2)(12,000 m)
PE = 823,200 kg*m^2/s^2
PE = 8.2 x 10^2 kg*m^2/s^2
(1 kg*m^2/s^2) is the SI equivalent to a Joule.
The potential energy is 8.2x10^2 Joules
ignoring air resistance a projectiles vertical speed will what?
In the absence of air resistance, the only force acting on both objects would be gravity. Both objects would experience the same 9.8 m/s² acceleration toward the ground.
Since the initial conditions of both projectiles are identical, the velocities of both projectiles will be the same at all times. Therefore, both projectiles will attain a zero vertical velocity at the same time, and it is at this point that they simultaneously reach their respective maximum heights.
The maximum heights will not be the same, and they will differ by precisely the amount of height difference between the launch points.
To understand more about air resistance -
https://brainly.com/question/14409464?referrer=searchResults
#SPJ1
a plane electromagnetic wave, with wavelength 3.0 m, travels in vacuum in the positive direction of an x axis. the electric field, of amplitude 300 v/m, oscillates parallel to the y axis. what are the (a) frequency, (b) angular frequency, and (c) angular wave number of the wave? (d) what is the amplitude of the magnetic field component? (e) parallel to which axis does the magnetic field oscillate? (f) what is the time-averaged rate of energy flow in watts per square meter associated with this wave? the wave uniformly illuminates a surface of area 2.0 m2. if the surface totally absorbs the wave, what are (g) the rate at which momentum is transferred to the surface and (h) the radiation pressure on the surface?
Since, we know that magnetic field is always perpendicular to the z axis or electric field.
Calculation:-
lambda = 2.8m
v = 3*10^8m/s
v = f(lambda)
(a) f = 1.07*10^8hz
(b)angular frequency = 2pif
= 6.72*10^8rad/s
(c) wave number = 2pi/lambda
= 2.24
(d) B=E/c
= 300/(3*10^8)
=10^-6Tesla
(e) Magnetic discipline is perpendicular to wave propagation and electric powered subject
The magnetic discipline is perpendicular to the z-axis.
Electromagnetic waves are non-mechanical waves. Electromagnetic waves do no longer require a medium to propagate and may without problems pass via a vacuum. Electromagnetic waves propagate in all guidelines from the source of interference. The wave will keep transferring till something interrupts it. Electromagnetic waves vary from mechanical waves in that they do no longer require a medium for propagation.
Learn more about Electromagnetic waves here:-https://brainly.com/question/25847009
#SPJ4
an automobile with a mass of 1325 kg has 3.02 m between the front and rear axles. its center of gravity is located 1.78 m behind the front axle. the automobile is on level ground. (a) determine the magnitude of the force from the ground on each front wheel (assuming equal forces on the front wheels). 2665.79 correct: your answer is correct. n (b) determine the magnitude of the force from the ground on each rear wheel (assuming equal forces on the rear wheels).
The magnitude of the force from the ground on each front wheel is 2775N.
Let us call the force on the front axle F and the force on the rear axle R.
We know that
⇒ F + R= total weight of vehicle = 1360 * 9.80 = 13328 Newtons
And using torques, you know that force on the front axle * distance to the center of mass = force on the rear axle * distance to the center
of mass
or F *1.78 = R * (3.05 - 1.78)
So
1.4016F = R
Then.
F + 1.4016 F = 13328
F = 5550 N and R = 13328 - 5550 = 7778N
So the force on each front tire is 5550 /2 = 2775N
And the force on each rear tire is 7778 /2 = 3889N
Force is a push or pulls upon an item because of the object's interaction with some other object. Pressure is a power that can exchange the motion of an object. A force can reason an object with mass to alternate its speed, i.e., to boost up. pressure also can be described intuitively as a push or a pull. A force has each significance and course, making it a vector amount.
Learn more about force here:-https://brainly.com/question/12970081
#SPJ4
a 1.92 kg object on a frictionless horizontal track is attached to the end of a horizontal spring whose force constant is 4.77 n/m. the object is displaced 5.31 m to the right from its equilibrium position and then released, which initiates simple harmonic motion. what is the magnitude of the force acting on the object 3.72 s after it is released? answer in units of n.
The magnitude of the force acting on the object of mass 1.92 kg, 3.72 s after it is released is 23.414 N in negative direction.
ω = √ ( k / m )
ω = Angular frequency
k = Force constant
m = Mass
k = 4.77 N / m
m = 1.92 kg
ω = √ 4.77 / 1.92
ω = √ 2.48
ω = 1.58 rad / s
F ( t ) = - m d ω² cos ω t
F ( t ) = Force wrt time
d = Displacement
t = Time
t = 3.72 s
d = 5.31 m
F ( 3.72 ) = - 1.92 * 5.31 * 1.58² cos ( 1.58 * 3.72 )
F ( 3.72 ) = - 25.45 cos 5.88
F ( 3.72 ) = - 23.414 N
Therefore, the magnitude of the force acting on the object is 23.414 N in negative direction.
To know more about magnitude of the force
https://brainly.com/question/15050441
#SPJ4
The place kicker on a football team kicks a ball from ground level with an initial speed of 8.40 m/s at an angle of 21.0° above the horizontal. How long is the ball in the air, in seconds, before it lands on the ground again? You may neglect air resistance.
Answer:
See below
Explanation:
Vertical component of the kick-off velocity is 8.4 sin21° = 3.01 m/s
Find the time-point where vertical velocity = 0 the ball is in the air for twice this long ( as it still has to fall back down to the ground)
vf = vo + at
0 = 3.01 m/s - 9.81 t shows t = .307 twice this is .614 sec
( what a sorry kick !)
you are moving toward a stationary observer in your spaceship at 0.5c while shining a light toward the stationary observer. at what speed does the stationary observer measure the light from your spaceship?
The stationary bystander measures the light coming from your spaceship at the speed of light.
What it refers to is speed. the rate at which the position of an object shifts in any direction. Speed is defined as the rate of the distance traveled to the time needed to cover that distance. Speed is a scalar volume since it just has a direction and no magnitude.
Light is a type of electromagnetic radiation that helps the mortal eye see or makes effects visible. The term" radiation that's visible to the mortal eye" can also be used to describe it. Photons, which are bitsy energy packets, are present in light.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
if sarah applies a force of 17.0 n to the end of a 35 cm lever at an angle of 25 degrees, what will be the torque exerted on the lever?
The torque that will be exerted on the lever is 2.49 N-m.
The torque on the rod is given by,
T = F x a
Where,
T is the torque,
F is the applied force,
a is the perpendicular distance from the end of the rod.
T = F.s.sinA
The force that Sarah applied is 17 N and s is the distance from one end of the lever is 0.35 m,
The angle at which the force is applied is 25 degrees.
Putting the values,
T = 17 x 35 x sin(25)
T = 2.49 N-m
So, yes, there will be a torque of magnitude 2.49 N-m.
To know more about Torque, visit,
https://brainly.com/question/17512177
#SPJ4
a nearsighted man has a far point of 300 cm. what kind of corrective lens should be prescribed for him?
The diverging lens/concave lens is used as a corrective lens is used for a nearsighted person
Nearsightedness is also known as myopia where the person with myopia will be able to see the near object but far objects will look blurry.
Myopia is corrected with lenses called "minus power lenses". They are concave in shape and help the eye to focus light properly. Myopia causes distant objects to appear blurry. Prescription glasses or contact lenses can usually correct this blurry distance vision. Myopic eyes have a stronger ability to focus than normal eyes. Focus in front of the retina, not on the retina. Lenses used to correct nearsightedness work by reducing the eye's ability to focus.
Learn more about myopia in
https://brainly.com/question/14833465
#SPJ4
you throw a ball upward with an initial speed of 4.5 m/s. when it returns to your hand 0.92 s later, it has the same speed in the downward direction (assuming air resistance can be ig- nored). what was the average acceleration vector of the ball?
The average acceleration vector of the ball is - 9.78 m/s².
When you throw a ball upward with an initial speed, it will go up until reaching its highest peak then it will go down. So the ball doing non-uniform motion. The formula for non-uniform motion including initial speed, and final speed with time is
v = u+at
u = initial speed (m/s) = 4.5 m/sv = final speed (m/s) = - 4.5 m/s (because it's going down)t = elapsed time (s) = 0.92 sa = acceleration (m/s²)v-u = at
[tex]a = \frac{v - u}{t}[/tex]
[tex]a = \frac{- 4.5 - 4.5}{0.92}[/tex]
[tex]a = \frac{- 9.0}{0.92}[/tex]
a = 9.78 m/s²
Learn more about The average acceleration here: https://brainly.com/question/13388291
#SPJ4
what effect does the amplitude setting on the function generator have on oscope display of the voltage in the small coil?
As the amplitude increases from the wave generator, the Voltages passing through the inductor will be higher. and consequently, the current passing through the inductor will also be higher Remember that when a voltage is applied across the inductor, the current is driven in the inductor due to the applied voltage.
When the applied voltage is sinusoidal it creates a sinusoidal current in the inductor with the same frequency as the applied voltage. As this current increases, it creates an induced potential difference proportional to the rate of change of current, and hence there is a sinusoidal induced voltage in the Inductor.
The function generator's amplitude control changes the voltage difference between the output signal's high and low voltage. Its direct current offset control changes the signal's average voltage with regard to the ground. A function generator is equipment to generate input functions for your circuit. It can generate sinewaves, square waves, triangular waves, modulated signals, and so on. An oscilloscope is equipment to display the signals in the circuit.
Learn more about The function generator here:-https://brainly.com/question/14499058
#SPJ4
determine what fraction of the kinetic energy of the ball before collision is lost during teh collsion. what happens to it?
1/2 m₁v₁²(m₁ / m₁+ m₂ ) is the fraction of Kinetic energy lost during an inelastic collision.
From the concept of law of conservation of energy, In an elastic collision when two objects collide with a particular velocity then the kinetic energy before the collision will be the same after the collision as well but that's not the case in an Inelastic collision where there's always loss of kinetic energy.
In case of inelastic collision,
pi = pf
here p = momentum
m₁v₁ = (m₁ + m₂)v₂
v₂= m₁v₁ / (m₁ + m₂) ------- equation 1
Ki = Kf
1/2m₁v₁² = 1/2 (m₁+m₂) v₂²
Put the value of v₂ from equation 1
1/2mv² = 1/2 (m₁ + m₂) [m₁v₁ / m₁+m₂]²
=> 1/2 (m₁v₁)² / ( m₁+m₂ )
∴ Fraction of Kinetic energy lost
= 1/2 m₁v₁² - 1/2 (m₁v₁)² / (m₁+m₂)
=> 1/2 m₁v₁²( m₁ / m₁ + m₂ )
To learn more about Collisions visit
https://brainly.com/question/4322828
#SPJ4
Science
Eighth grade D.1 Calculate density, mass, and volume 9BL
Submit
Recommendations
Olive oil in a bottle has a mass of 690 grams and a volume of 750 cubic centimeters.
Calculate its density.
Write your answer to the hundredths place.
grams per cubic centimeter
The density of the of the olive oil, given that it has a mass of 690 grams and a volume of 750 cm³ is 0.92 g/cm³
How do I determine density of the olive oil?We know that density is defined as mass per unit volume. It is expressed as:
Density = mass / volume
Thus, with the above formula, we can determine the density of the oliver oil as illustrated below:
Mass of olive oil = 690 gVolume of olive oil = 750 cm³ Density of olive oil = ?Density = mass / volume
Density of olive oil = 690 / 750
Density of olive oil = 0.92 g/cm³
Therefore, we can conclude that the density of the olive oil is 0.92 g/cm³
Learn more about density:
https://brainly.com/question/952755
#SPJ1
ima rilla saari rushes to her car in order to hurry home and get dressed for work. failing to realize the dangers of driving under slick and icy conditions, she collides her 940-kg mazda miata into the rear of a 2460-kg pick-up truck which was at rest at the light on lake avenue. ima's pre-collision speed was 12.5 m/s. determine the post-collision speed of the two entangled cars as they slide across the ice.
The two intertwined autos are sliding on the ice at a 3.46 m/s post-collision speed.
What is conservation of momentum?The principle of momentum conservation argues that within a given problem domain, momentum is never created nor destroyed but only modified by the action of forces as they are represented by Newton's laws of motion.
According to the rule of conservation of momentum, absent an external force, the combined momentum of two or more bodies operating upon one another in an isolated system remains constant. As a result, momentum cannot be gained or lost.
The speed of the Mazda before the accident multiplied by the mass of the Mazda must match the speed after the collision multiplied by the mass of both cars, according to the property of conservation of momentum:
m1v1 = m1 + m2 *v2
940*12.5 = 940 +2460 *v2
v2 = 3.46 m/s
To learn more about conservation of momentum refer to:
https://brainly.com/question/7538238
#SPJ4
A mass on a spring undergoes shm. When the mass is at its maximum displacement from equilibrium, its instantaneous velocity?.
When the spring undergoes simple harmonic motion and its mass is at maximum displacement then its instantaneous velocity is zero.
Simple Harmonic Motion:
Simple harmonic motion is a periodic motion in which the acceleration of the object undergoing the simple harmonic motion is directly proportional to the distance of the object from its equilibrium position and is always directed toward the mean position.
At the maximum displacement, the spring is under its greatest tension, which forces the mass upward. At the maximum displacement, the spring reaches its greatest compression, which forces the mass back downward again.
Therefore we get that when mass is at its maximum displacement from equilibrium its instantaneous velocity is zero.
To know more about the simple harmonic motion refer to the link given below:
https://brainly.com/question/26114128
#SPJ4
a 200 g mass is placed on the meter stick 20 cm from the fulcrum. a 170 g mass is used tobalance the system. how far will it have to be located from the fulcrum to keep the systeminbalance?
200 g mass is placed on meter stick 20 cm from fulcrum. a 170 g mass is used to balance the system and placed the meter stick at 23.52cm.
What is equilibrium?A dynamic or static equilibrium between opposing forces or actions, such as when forces are acting on a body and the resultant is zero (as in a reversible chemical reaction when rates of reaction in both the directions are equal)
The word "equilibrium" derives from the Latin word "libra," which means "weight" or "balance." As a constellation, astrological sign, and representation of the zodiac, Libra is sometimes shown as a set of balance scales, frequently held by the blindfolded goddess of justice, which stands for justice, fairness, and equality. Biology, chemistry, physics, and economics all have different definitions of equilibrium, yet they all refer to the harmony of opposing forces.
F₁d₁ = F₂d₂
m₁gd₁ = m₂gd₂
m₁d₁ = m₂d₂
here,
m₁ is mass of known object = 200 g
m₂ is mass of unknown object = 170 g
d₁ is distance from fulcrum of known object = 20 cm
d₂ is distance from fulcrum of unknown object = ?
∴ 200 × 20 = 170 × d₂
4000 = 170 × d₂
4000/170 = d₂
d₂ = 23.52 cm
170 g mass is placed at the distance of 23.52 cm.
To know more about equilibrium, visit:
https://brainly.com/question/29224063
#SPJ4
the base of an aluminum block, which is fixed in place, measures 90 x 90 cm. the height of the block is 60cm. a force, applied to the upper force and parallel to it, produces a shear strain of 0.0060. the shear modulus of aluminum is 3.0 x 10^10 pa. what is the displacement
The displacement of an aluminum block, which is fixed in place, measures 90 x 90 cm with a height of 60 cm is 0.36 cm
S = Shear ε / Shear γ
S = Shear Modulus
ε = Stress
γ = Strain
S = 3 * [tex]10^{10}[/tex] Pa
Shear γ = 0.006
Shear ε = S * Shear γ
Shear ε = 3 * [tex]10^{10}[/tex] * 0.006
Shear ε = 1.8 * [tex]10^{8}[/tex]
Shear ε = 180 MPa
Displacement = Shear ε * l
l = Length = 60 cm
Displacement = 0.006 * 60
Displacement = 0.36 cm
Therefore, the displacement of the upper phase aluminum block is 0.36 cm in the direction of applied force.
To know more about Shear Modulus
https://brainly.com/question/14070556
#SPJ4
A plane starting at rest at the south end of a runway undergoes a uniform acceleration of 1.60 m/s to the north. At takeoff, the plane's velocity is 72.0 m/s to the north. How far does the plane travel across the runway
The distance travelled by the plane across the runway is determined as 1,620 m.
What is the distance travelled by the plane across the runway?The distance travelled by the plane across the runway is calculated by applying the following equation.
v² = u² + 2as
where;
v is the final velocity of the planeu is the initial velocity of the planea is the acceleration of the planes is the distance travelled by the planeThe initial velocity of the plane, u = 0, since it started from rest.
v² = 0 + 2as
s = v²/2a
The given parameters;
acceleration of the plane, a = 1.6 m/s²final velocity of the plane = 72 m/ss = (72²)/(2 x 1.6)
s = 1,620 m
Thus, the distance travelled by the plane along or across the runway depends on the final velocity of the plane and the acceleration of the plane.
Learn more about distance travelled here: https://brainly.com/question/24283318
#SPJ1
how do astronomers see astrophysical black holes if no light can escape from the event horizon of the black hole?
The event horizon of a black hole, the region beyond which there is no return, is the zone from which no light of any sort, including X-rays, can escape. Black hole research telescopes operated by NASA.
Are examining the black holes' surroundings, which contain material that is quite near the event horizon. A black hole is an area of spacetime where gravity is so intense that nothing can escape from it, not even electromagnetic radiation like horizon. A sufficiently compact mass can distort spacetime to generate a black hole, according to general relativity theory.
A black hole is a compact, dense object whose gravitational attraction is so powerful that nothing can escape from it up close, not even light.
Learn more about horizon here
https://brainly.com/question/14155894
#SPJ4
4. how can we change the speed of waves in a string? a) by changing the supplied frequency b) by changing the string tension. c) by changing the size (gauge) of the string d) either b) or c) will do
We change the speed of waves in a string option a. by changing the supplied frequency.
Increasing the tension on a string increases the rate of a wave, which increases the frequency (for a given length). Urgent the finger at exceptional places adjustments the period of string, which changes the wavelength of the status wave, affecting the frequency.
The speed of a wave on a string depends on the rectangular root of the anxiety divided through the mass per length, the linear density. In standard, the velocity of a wave via a medium relies upon the elastic assets of the medium and the inertial assets of the medium.
While the length of a string is modified, it'll vibrate with a one-of-a-kind frequency. Shorter strings have better frequency and therefore better pitch.
Learn more about frequency here:-https://brainly.com/question/254161
#SPJ4
