The probability of picking a grade (X) and the grade being greater than 90 is 2.28%.
The problem involves determining the probability of selecting a grade from a normally distributed population of grade and getting a score greater than 90 in a statistics class.
To solve this question, use the following steps:
Step 1: Calculate the z-score for the given value
z = (x - μ)/ σz
= (90 - 78) / 6
= 2
Step 2: Use the z-score table or calculator to find the probability of getting a z-score of 2 or more.
This value is known as the standard normal cumulative distribution function
(CDF)P (Z > 2)
= 1 - P (Z < 2)P (Z < 2)
= 0.9772 (from the table)
Therefore, P (Z > 2) = 1 - 0.9772
= 0.0228 or 2.28%
To know more about probability visit:
https://brainly.com/question/31828911
#SPJ11
The desert tortoise (Gopherus agassizii) is listed as endangered. Direct human impacts on the
tortoise include human degradation by off-road vehicles (including direct mortality), habitat loss due
to urbanisation and agriculture, and hunting. Other impacts include sheep and cattle grazing, and
predation by ravens on young animals. Ecologists were tasked with assessing threat to the
population and comparing two management scenarios: (1) reducing human disturbance (affecting
larger individuals), and (2) controlling ravens (affecting smaller individuals).
A population projection matrix was constructed from existing data on survival and reproduction of
the tortoise in eight age classes (see Figure below). The estimated population growth rate
calculated from the population projection matrix was 0.96.
a. What does the population growth rate tell you about the long-term persistence of the population? b. Explain the concept of sensitivity analysis of a structured population model. How does elasticity differ from sensitivity? c. The figure below shows you the elasticities for survival in each age (see caption for more information). In light of the population information, and the known threats, what management recommendations would you make for a recovery plan for the species? Figure. Elasticity for survival among age classes. The age classes are Yearling, Juveniles (over 2-year steps, y1 and y2), Immature (2-year steps), Sub-adult and Adult (2-year steps). Darker green bars are elasticity for the probability of surviving and staying in an age class, and the lighter grey bars are elasticity for the probability of surviving and moving up to the next age class. 20 minute 0.30 0.25 Elasticity for Survival 0.15 0.10 0.05 0.00 Yearling Juv-y1 Juv-y2 Imm-y1 Imm-y2 Subadult Adult-y1 Adult-y2 Age class
The desert tortoise (Gopherus agassizii) is an endangered species. The tortoise is impacted by human factors such as off-road vehicles (including direct mortality), urbanisation, agriculture, and hunting. Other factors include cattle and sheep grazing and predation of ravens on young tortoises.
Ecologists developed a projection matrix that could estimate the growth rate of the population and compare two management scenarios to assess threats to the population. The population growth rate of the tortoise population was 0.96.The growth rate of the population does not guarantee the long-term persistence of the population. The reason for this is that the population growth rate indicates the rate at which the population increases, and this increase can be a temporary phenomenon. The growth rate is a significant indication of the population's health, but it is not a long-term guarantee. Sensitivity analysis is a process of determining how variations or perturbations in the parameters of a model impact the outcomes of that model. Elasticity is a concept that determines how different factors or parameters contribute to the changes in the model's outcome. Sensitivity analysis helps to determine the model parameters' sensitivity to the model's outcome and to identify the critical parameters that impact the model's outcome. On the other hand, elasticity determines how changes in a model parameter impact the model's outcome. Elasticity is used to determine the management plan that will be more effective in the recovery of the species given the known threats and population information. Based on the elasticity for survival in each age group, the species management recommendations are to reduce adult mortality rates. This can be achieved by reducing human disturbance or raven control measures.
To know more about endangered visit;
brainly.com/question/30956277
#SPJ11
Several years have passed, and you have been asked to review the current tracking and projection model to determine if it is still appropriate for the pension plan. For the most part, the model has generally been reliable. However, there have been some issues related to the alignment of the initial assumptions setting with the emerging experience. Additionally, some other items were brought to your attention:
• The timing of the data feed related to the future asset return and discount rate assumptions from the third-party vendor has proven to be unreliable at times. The CFO has commented as such when monthly reports were delayed as a result.
o Also due to technical issues, the feed that was intended to be automatic has at times needed to be imported manually, which has consumed significant resources.
• Intramonth benchmarking has generally been reliable, however, there were several instances when experience deviated from benchmarks and significant true-ups were required.
• Forecasted contributions have generally created an accurate picture of future expectations on a deterministic basis. However, the CFO has asked if stochastic projections are possible, to be able to visualize a funnel of doubt based on 1000 different scenarios.
• Potential issues with the tracker given that liability cash flows are only updated annually.
In light of these observations, your manager has asked you to produce two internal documents for your findings:
1. In the first document, your manager would like a detailed analysis of the challenges surrounding the model, including the appropriateness of the assumptions. In an informal response, recommend ways that these can be tested and be sure to address the following:
• General recommendations for improvements based on the experience listed above and consider any other potential feedback that could be solicited from others, both internal and external.
• Model revisions necessary to implement recommendations.
2. In the second document, your manager would like a maintenance document that can be used as a guide going forward. Outline potential procedures in a formal document and be sure to include the following:
• Data and systems required to monitor future experience.
• Processes to implement future revisions to the model.
QW
The first document should include a detailed analysis of challenges, recommendations for improvements, and necessary model revisions.
What are the key items to include in the first document for reviewing the tracking and projection model for the pension plan?The first document should provide a detailed analysis of the challenges associated with the current tracking and projection model for the pension plan.
It should address the issues related to the alignment of initial assumptions with emerging experience, the unreliable timing of data feeds, the need for manual import due to technical issues, deviations from benchmarks, and the request for stochastic projections.
Recommendations for improvements should be based on the experiences mentioned, and feedback should be sought from internal and external stakeholders.
The document should also outline the necessary revisions to the model to implement the recommendations.
The second document should serve as a maintenance guide for future use. It should outline the data and systems required to monitor future experience, ensuring that the timing and reliability of data feeds are addressed.
The document should also describe the processes and procedures for implementing future revisions to the model, considering the potential issues with liability cash flow updates and providing guidelines for ongoing maintenance and management.
Learn more about first document
brainly.com/question/5654376
#SPJ11
A company sold merchandise for $1,000 on account with terms of2/15, n/30. The company uses a perpetual inventory system. Defective merchandise of $200 was returned two days later. If the payment was received after 30 days, the journal entry to record the cash receipt will include ________.
A. a credit to Cost of Goods Sold for $1,000 and a debit to Sales Revenue for $1,000
B. a debit to Cash for $980 and a credit to Accounts Receivable for $980
C. a debit to Cash for $800 and a credit to Accounts Receivable for $800
D. a credit to Sales Revenue for $800 and a debit to Cash for$800
The journal entry to record the cash receipt will include a debit to Cash for $980 and a credit to Accounts Receivable for $980, hence the correct option is B. The journal entry is an accounting record that is used to document business transactions.
In order to record the sale of merchandise for $1,000 on account with terms of2/15, n/30, the following journal entry will be made:-
Debit Accounts Receivable for $1,000 Credit Sales Revenue for $1,000 If the company receives payment for this transaction after 30 days, the following entry would be made to record the receipt of cash:Debit Cash for $980 Credit Accounts Receivable for $980. In order to find out the correct answer, we need to first calculate the amount of cash that will be received from the sale, given that the customer is eligible for a 2% discount if the payment is made within 15 days:-
Amount to be paid = $1,000 - ($1,000 x 2%) = $980 Therefore, the journal entry to record the cash receipt will include a debit to Cash for $980 and a credit to Accounts Receivable for $980. Hence, the correct option is B.
To learn more about "Journal Entry" visit: https://brainly.com/question/28390337
#SPJ11
One of the main functions of the central bank is to maintain
macroeconomic stability. In the scenario presented in part iv) outline and
explain a possible action the central bank could take to return the
economy to its natural rate of output. If policy makers did not intervene in
this economy, what would happen in the long run?
If policy makers did not intervene in this economy, it is likely that the economy would continue to operate below its natural rate of output in the long run. This could lead to high levels of unemployment, lower economic growth, and a general decline in the standard of living.
One of the main functions of the central bank is to maintain macroeconomic stability. The macroeconomic stability refers to the smooth operation of the economy without any major fluctuations in its performance.
In the scenario presented, where there is a situation of the economy being below its natural rate of output, a possible action the central bank could take to return the economy to its natural rate of output would be to use expansionary monetary policy. Expansionary monetary policy refers to an increase in the money supply and lowering of interest rates to stimulate economic growth. The central bank could use the following tools to implement an expansionary monetary policy:
Reduce the reserve requirement: By lowering the amount of money that banks are required to hold in reserve, the central bank can increase the amount of money that banks can lend to consumers and businesses.
Lower interest rates: Lowering interest rates makes borrowing cheaper and encourages people to spend more money. This can lead to an increase in consumer spending, investment, and economic growth.
Purchase government securities: When the central bank purchases government securities, it increases the money supply in the economy, making it easier for people to borrow money and spend. This can help stimulate economic growth.
Therefore, it is essential for policy makers to take action to stabilize the economy and prevent long-term negative effects.
To know more about macroeconomic , visit:
https://brainly.com/question/28489802
#SPJ11
Explain what is categorical thinking and locus of control and how it impact on workplace behavior with an example.
Categorical thinking refers to a cognitive process where individuals tend to organize and classify information into distinct categories or groups.
It involves perceiving and interpreting the world in terms of predefined categories, making it easier for individuals to process and understand complex information. Locus of control, on the other hand, refers to an individual's belief about the extent to which they have control over events and outcomes in their lives. It can be either internal, where individuals believe they have control, or external, where they believe outcomes are determined by external factors. These cognitive processes have a significant impact on workplace behavior, shaping how individuals approach tasks, perceive success or failure, and respond to challenges.
Categorical thinking influences workplace behavior by shaping how individuals perceive and interpret information. When individuals categorize information, they tend to simplify complex situations and rely on generalizations. For example, if a manager categorizes employees as either "good performers" or "poor performers" based on a single incident, it can lead to biased judgments and influence decisions related to promotions, performance evaluations, or training opportunities. Categorical thinking can also create stereotypes or biases, leading to unfair treatment or discrimination in the workplace.
Locus of control influences workplace behavior by determining individuals' beliefs about the causes of success or failure. Those with an internal locus of control believe that their actions and efforts directly influence outcomes. They are more likely to take initiative, set challenging goals, and persist in the face of obstacles. For example, an employee with an internal locus of control who receives negative feedback on a project may view it as an opportunity for growth, take responsibility for their actions, and make necessary improvements. In contrast, individuals with an external locus of control may attribute success or failure to luck, fate, or external factors, leading to a more passive approach to work and a lower sense of personal responsibility.
In summary, categorical thinking involves organizing information into distinct categories, which can lead to biased judgments and stereotypes in the workplace. Locus of control, whether internal or external, shapes individuals' beliefs about their control over outcomes and influences their motivation and response to challenges. Understanding these cognitive processes can help organizations promote fairness, minimize biases, and foster a proactive and accountable workplace culture.
Learn more about workplace behavior here: brainly.com/question/32107453
#SPJ11
Which of the following is NOT correct regarding the duties of the board of directors, and compliance with their duties? A Directors should demonstrate loyalty when acting for the benefit of third parties B I do not want to answer this question с Directors should avoid conflicts of interest D Directors should act in good faith for those for whom they work E Directors should exercise high diligence and due care when acquiring or processing information 10. The problem with using the EBITDA metric is that: A It is before interest payments and hence misleading about the effect of debt B It is after costs and hence a reflection of the operational side of the business C It is before taxes and therefore it does not stand for cash flows free to be paid to debt and equity holders D It is adjusted for one-off items that are often recurrent, hence a source of potential manipulation E I do not want to answer this question
The option that is NOT correct regarding the duties of the board of directors and compliance with their duties is A. Directors should demonstrate loyalty when acting for the benefit of third parties.
What is the reason?A director should follow all rules and regulations. They must also demonstrate loyalty when acting for the benefit of the company or company shareholders.
Therefore, loyalty to the third party is not accurate regarding the duties of the board of directors, and compliance with their duties.
The following are the correct statements regarding the duties of the board of directors: Directors should avoid conflicts of interest. Directors should act in good faith for those for whom they work.
Directors should exercise high diligence and due care when acquiring or processing information. The problem with using the EBITDA metric is that it is before interest payments and hence misleading about the effect of debt. A company's debt is a significant cost, and using a metric that doesn't take it into account might be misleading.
The other options about the EBITDA metric are as follows: It is after costs and hence a reflection of the operational side of the business - This statement is not a problem with using the EBITDA metric.
It is before taxes and therefore it does not stand for cash flows free to be paid to debt and equity holders - This is a potential problem with using the EBITDA metric because it doesn't take taxes into account.
It is adjusted for one-off items that are often recurrent, hence a source of potential manipulation - This is a potential problem with using the EBITDA metric because companies might manipulate it by including/excluding one-off items.
To know more on regulations visit:
https://brainly.com/question/30695404
#SPJ11
Which side AND witch amount should be the cash and Carthurient Carried forward (Cloding)? Cash and cash equivalents 21,000 5,000 5,000 2,000 7,000 630 500 4,000 1,000 200
The cash and cash equivalents account should have a debit balance.
to determine which side and amount should be used for the cash and cash equivalents carried forward (closing), we need to consider the normal balance of the account.
cash and cash equivalents are typically classified as assets on the statement of financial position (balance sheet). the normal balance for assets is a debit balance. given the amounts provided:
21,000, 5,000, 5,000, 2,000, 7,000, 630, 500, 4,000, 1,000, 200
we need to sum up these amounts to determine the total cash and cash equivalents balance.
total cash and cash equivalents = 21,000 + 5,000 + 5,000 + 2,000 + 7,000 + 630 + 500 + 4,000 + 1,000 + 200
total cash and cash equivalents = 46,330
since the normal balance for assets (including cash and cash equivalents) is a debit balance, the cash and cash equivalents carried forward (closing) would be on the debit side.
Learn more about financial here:
https://brainly.com/question/28319639
#SPJ11
bilateral and unilateral contracts are best described by which of the following statements?
A. The number of parties obligated to perform.
B. The number of promises each party is obligated to perform.
C. The number of lenders involved.
D. The number of signatures required on the contract.
Bilateral and unilateral contracts are best described by the statement: B. The number of promises each party is obligated to perform.
In a bilateral contract, both parties make promises and are obligated to perform. Each party is bound to fulfill their respective promises stated in the contract. For example, in a sales contract, the buyer promises to pay a certain amount, and the seller promises to deliver the goods.
On the other hand, in a unilateral contract, only one party makes a promise and is obligated to perform upon the occurrence of a specific condition. The other party is not obligated to perform anything unless they choose to. An example of a unilateral contract is a reward offer, where the person making the offer promises to pay a reward if someone performs a specified action.
Know more about unilateral contracts here:
https://brainly.com/question/31135099
#SPJ11
Case 1- Tyrell’s: when the chips are down raise a glass!
The gourmet Tyrrells crisps brand was founded in the UK in 2002 by struggling potato farmer and entrepreneur William Chase. The product was a huge success, reconnecting snack foods with homegrown produce. The business expanded its market into Europe and later into the US and received numerous awards for the taste and quality of its crisps, in England as well as internationally.
Chase had a long-running dispute with Tesco over stocking his potatoes, and so refused to sell them any supplies of Tyrrells crisps. His previous farming business had collapsed when the large supermarkets, led by Tesco, began sourcing produce from overseas to push down costs. Instead he cultivated relationships with farm shops and delicatessens.
In April 2008, Chase sold a majority stake for £30 million to Langholm Capital. After Langholm took over, they dropped the existing distribution chain, and focused on large supermarkets including Tesco; they then dropped Chase as a supplier of potatoes when they found they could get them cheaper elsewhere.
Chase used the £30 million from the sale of his stake in Tyrrell’s to set up a potato farm near Hereford and built a distillery and started production of Chase Potato Vodka, using his own farmed potatoes. Researching the spirits industry Chase discovered that vodka could be made from any fermented agricultural base, distilled to around 40 per cent alcohol by volume (ABV). Theoretically vodka could be distilled from anything that contains starch or sugars such as bananas or beetroots. To contain costs most vodka distillers use cereals rather than grains, as many believe that this did not affect the taste. The team at Chase, however, believe that using potatoes improves the taste considerably; they use starchy varieties such as Lady Rosetta and Golden Wonder – the same as they used for crisps, in fact, as they have a high dry-matter content they make a quality vodka. Chase Vodka ships in excess of 5,000 bottles a week, each retailing at £38 and the product was named best in the world at the 2010 San Francisco World Spirits competition.
The company explored the possibility of distilling gin and decided to produce two types of gin using their own grown ingredients: one using its potato-vodka base, then flavoured with juniper buds as well as berries; and one using its cider-apple vodka base, flavoured with Herefordshire-grown botanicals including Bramley apples, elderflower and hops to produce unique tasting gins. The company sells its £40 a bottle spirits in upmarket outlets such as the supermarkets Waitrose and Booths and the company is wary of dealing with the supermarket giants who often treat spirits as loss leaders. To expand the business Chase offers tours of the distillery, warehouses and barns and guests are welcome to stay at the nearby family owned bed and breakfast hotel.
The original Tyrell’s snacks company business was sold by Langholm Capital in 2013 for £100m to Investcorp, a Bahrain-based luxury brands investor.
Questions:
Was farmer William Chase’s decision to set up Tyrell’s based on an ‘off the cuff’ basis and what critical issues might he have missed or given insufficient attention?
(5 Marks)
Was the decision to establish the crisp business an incremental or a radical innovation? How might the seven-step approach to business decision making have led him to anticipate the probability that Langholm Capital would supply supermarkets and then cease to buy his potatoes?
(5 Marks)
How would you describe the decision to distill two types of gin in the vodka distillery? Was it a limpet, cautious or innovative strategy?
(5 Marks)
How did Chase link creativity, entrepreneurship and innovation after setting-up the distillery business?
Question 1William Chase's decision to set up Tyrell's was not on an off-the-cuff basis. However, it was based on the objective of reconnecting snack foods with homegrown produce. With that said, there were still critical issues that he might have missed or given insufficient attention. For instance, he had a long-running dispute with Tesco over stocking his potatoes. Instead of working out a solution to the problem, he simply refused to sell any supplies of Tyrrells crisps to Tesco.
Question 2The decision to establish the crisp business was an incremental innovation. William Chase might have anticipated the probability that Langholm Capital would supply supermarkets and then cease to buy his potatoes using the seven-step approach to business decision making. This approach involves defining the problem or opportunity, identifying the criteria, weighing the criteria, generating alternatives, rating each alternative on each criterion, computing the optimal decision, and implementing and evaluating the decision.Question 3The decision to distill two types of gin in the vodka distillery was an innovative strategy.
It involved the company exploring the possibility of distilling gin and deciding to produce two types of gin using their own grown ingredients: one using its potato-vodka base, then flavoured with juniper buds as well as berries; and one using its cider-apple vodka base, flavoured with Herefordshire-grown botanicals including Bramley apples, elderflower and hops to produce unique tasting gins.Question 4After setting up the distillery business, Chase linked creativity, entrepreneurship and innovation by using his own farmed potatoes to create quality vodka. He also discovered that vodka could be made from any fermented agricultural base, distilled to around 40 per cent alcohol by volume (ABV). Moreover, he explored the possibility of distilling gin and decided to produce two types of gin using his own grown ingredients. Finally, he offered tours of the distillery, warehouses and barns to expand the business and attract more customers.
To know more about critical visit:-
https://brainly.com/question/15091786
#SPJ11
.mangobl corporation is considering dropping product D14E. data from the company accounting system appears below:
sales. 740,000
variable exp. 341,000
fixed selling exp 257,00
fixed selling& admin exp. 205,00
all fucrd expenses of the company are fully allocated to profucts in the company accounting system. further investigation has revealed that 199,500 of the fixed manufacturing expenses and 114,500 of the fixed selling and administrative expenses are avoidable if product D14E is discontinued.
Required :
i) According to the company's accounting system, what is the net operating income earned by product D14E ( net losses should be indicated by a minus sign)
b ) what would be thr increase (decrease) to income of dropping product D14E?should thr product br dropped?
a ) Net operating income(loss) ___________
b) financial advantage ( disadvantage) __________ the product ____________dropped
To determine the net operating income earned by product D14E and the financial advantage or disadvantage of dropping the product, we need to analyze the relevant expenses.
Given data:
Sales: $740,000
Variable expenses: $341,000
Fixed selling expenses: $257,000
Fixed selling and administrative expenses: $205,000
Avoidable fixed manufacturing expenses: $199,500
Avoidable fixed selling and administrative expenses: $114,500
a) To calculate the net operating income (or loss) for product D14E, we subtract the total expenses (variable expenses, fixed selling expenses, fixed selling and administrative expenses, and avoidable fixed expenses) from the sales:
Net operating income = Sales - Variable expenses - Fixed selling expenses - Fixed selling and administrative expenses - Avoidable fixed expenses
Net operating income = $740,000 - $341,000 - $257,000 - $205,000 - ($199,500 + $114,500)
b) To determine the financial advantage or disadvantage of dropping product D14E, we compare the net operating income of the product before and after dropping it:
Financial advantage (disadvantage) = Net operating income before dropping - Net operating income after dropping
If the financial advantage is positive, it indicates an increase in income. If it is negative, it indicates a decrease in income. The decision to drop the product depends on whether the financial advantage of dropping it outweighs the net operating income earned by the product.
Please note that the calculations for net operating income and financial advantage/disadvantage cannot be provided without the specific values of the avoidable fixed expenses.
Learn more about product here
https://brainly.com/question/25922327
#SPJ11
For the next seven questions, use the following information: Stylez Corp. has a monthly demand of 1,800 units for a product. The annual holding cost for the product is estimated to be $4.00 per unit and the cost of placing each order is $125.00. The current order quantity (lot size) is 3.000 units. how many will bevplaced annually?
annual holding cost?
annual ording cost ?
economic order quaility?
total annuel inventory cost?
The answer is , the total annual inventory cost is $21,400.00, given all of the situations.
How to determine?The annual demand for Stylez Corp is:
1,800 x 12 = 21,600 units.
The number of times the order will be placed annually is:
21,600/3,000 = 7.2 or approximately 7 times.
Annual ordering cost = (Number of orders per year) x (Cost of placing each order) = 7 x $125.00 = $875.00.
Economic Order Quantity (EOQ) can be calculated as follows:
EOQ = √[(2DS)/H].
Where,
D = Annual demand
S = Cost of placing an order
H = Annual holding cost per unit of inventory.
Thus, EOQ = √[(2 × 21,600 × $125.00)/$4.00] = 2,400 units.
The total annual inventory cost can be calculated as follows:
Total cost = Purchase cost + Ordering cost + Holding cost
Total cost = (Number of units) × (Cost per unit) + Annual ordering cost + [(Number of units)/2] × (Annual holding cost per unit of inventory).
Substituting the values, Total cost = (2,400)($9.00) + $875.00 + [(2,400/2)($4.00)] = $21,400.00.
Therefore, the total annual inventory cost is $21,400.00.
To know more on inventory visit:
https://brainly.com/question/31146932
#SPJ11
How can the government eliminate an output gap by changing its purchases of goods and services?.
The government can eliminate an output gap by changing its purchases of goods and services. The government changes the output gap by increasing or decreasing its spending to stimulate or restrain the economy.
Fiscal policy is the method that governments use to control economic activity. It involves changes in government spending and tax rates to affect aggregate demand in the economy.The government can increase its purchases of goods and services to increase aggregate demand and decrease the output gap. The government can invest in public infrastructure projects such as roads, bridges, and hospitals, which will create employment and increase economic growth, ultimately increasing aggregate demand. This leads to a higher output gap and a positive output gap.The government can also decrease its purchases of goods and services to decrease aggregate demand and increase the output gap.
This may involve cutting back on public infrastructure projects and other government programs. The government may also increase taxes to reduce the disposable income of individuals and decrease their demand for goods and services. This leads to a lower output gap and a negative output gap.Fiscal policy is just one tool the government can use to eliminate output gaps. The government can also use monetary policy to stimulate or restrain the economy. The central bank is responsible for implementing monetary policy. It involves changes in interest rates and money supply to affect aggregate demand.
To know more about Fiscal policy refer to:
https://brainly.com/question/6583917
#SPJ11
Suppose you purchase a $1,000 face value, 6-year, 5- percent coupon bond for $950 and hold it for three years. During that time, the interest rate falls to 2%. Calculate your annual holding period return.
By holding the bond for three years and taking into account the coupon payments and the change in interest rates, the annual holding period return is 6.83%.
To calculate the annual holding period return (HPR) for the bond, we need to consider the cash flows received from the bond over the three-year holding period and compare it to the initial investment.
Here's how we can calculate the HPR step by step:
1. Calculate the annual coupon payment:
The coupon rate of the bond is 5% of the face value, so the annual coupon payment is (0.05) * ($1,000) = $50.
2. Determine the total cash flow received over the three-year holding period:
In the first three years, you will receive coupon payments of $50 each year. So the total cash flow from coupons is $50 * 3 = $150.
At the end of the third year, you will also receive the bond's face value of $1,000.
Therefore, the total cash flow received is $150 (coupon payments) + $1,000 (face value) = $1,150.
3. Calculate the HPR:
The HPR is calculated as the percentage increase in the value of the investment over the holding period, divided by the initial investment.
The initial investment is $950, and the final value is $1,150. The percentage increase is ($1,150 - $950) / $950 = 0.2105, or 21.05%.
Since the holding period is three years, we need to convert the HPR to an annual rate. To do this, we use the formula: HPR^(1/t) - 1, where t is the number of years.
The annual HPR is (1 + 0.2105)^(1/3) - 1 = 0.0683, or 6.83%.
Therefore, the annual holding period return for the bond is 6.83%.
By holding the bond for three years and taking into account the coupon payments and the change in interest rates, the annual holding period return is 6.83%. This indicates the average annual return earned on the investment over the three-year period.
To know more about bond, visit
https://brainly.com/question/25965295
#SPJ11
1. Choose any commodity (maize, cocoa, cashew, tomato, poultry).
2. Identify all the key value chain actors involved in the production and supply of that finished good
3. Identify the lead firms in that chain
4. Identify key agencies/influencers whose activities affect the production and supply of that food commodity
5. Draw a simple value chain using boxes and arrows to link the key actors
6. Identify the various opportunities in the chain and show what you can do as an agripreneur to add value to the chain you have drawn
7. write a business plan for the proposed agribusiness
Key value chain actors involved in the production and supply of poultry, The key value chain actors in the production and supply of poultry include farmers, poultry processing companies, animal feed manufacturers, distributors, wholesalers, and retailers.
Lead firms in the chain, The lead firms in the poultry value chain include large poultry processing firms such as Perdue Farms, Tyson Foods, and Pilgrim's Pride. Key agencies/influencers whose activities affect the production and supply of poultry, The key agencies/influencers whose activities affect the production and supply of poultry are the USDA (United States Department of Agriculture) and FDA (Food and Drug Administration), which regulate and inspect poultry production, processing, and distribution.
To know more about production refer :
https://brainly.com/question/31781517
#SPJ11
Giving opening balance of relevant accounts related to item "Tangible fixed asset" in Balance sheet; 3 transactions of increase of Fixed asset; 3 transactions of decrease of fixed assets Required: 1. Make journal entries for the above transaction 2 Present item "Tangible fixed asset" at the end of accounting .
Answer:
Journal entry for increase in fixed assets :
```
Fixed Asset Account Debit
Cash/Bank Account Credit
```
Journal entry for decrease in fixed assets :
```
Cash/Bank Account Debit
Fixed Asset Account Credit
```
To present the item "Tangible fixed asset" at the end of accounting, you can create a balance sheet that lists all of your assets, liabilities, and equity. The "Tangible fixed asset" account should be listed under the "Fixed Assets" section of the balance sheet.
The opening balance should be added to the net amount of transactions related to Fixed Assets to arrive at the final amount of Fixed Assets that will be presented in the balance sheet.
The opening balance for relevant accounts related to the item "Tangible Fixed Asset" in the balance sheet is recorded using journal entries and is shown as follows:
Debit Fixed Asset Account with the opening balance
Credit Cash/Bank account with the opening balance
Journal entries for transactions increasing Fixed Assets:
Debit Fixed Asset Account with the purchase cost
Credit Cash/Bank Account with the same amount
Debit Fixed Asset Account with any additional expenses incurred in bringing the asset to the usable state
Credit Cash/Bank Account with the same amount
Debit Fixed Asset Account with any amount paid for asset maintenance, repairs, or improvements
Credit Cash/Bank Account with the same amount
Journal entries for transactions decreasing Fixed Assets:
Debit Cash/Bank Account with the amount of sales proceeds
Credit Fixed Asset Account with the purchase cost of the asset being sold
Debit Fixed Asset Account with the amount of the loss
Credit Cash/Bank Account with the same amount
Debit Fixed Asset Account with the cost of asset retirement
Credit Accumulated Depreciation Account with the same amount
Presenting Tangible Fixed Assets at the end of accounting is shown in the balance sheet as follows:
Fixed Asset Account
Net amount of all transactions related to Fixed Asset Accounts
To learn more about balance sheet, visit:
https://brainly.com/question/30877489
#SPJ11
the introduction of money into an economy eliminates the double coincidence of wants. true false
True. The introduction of money into an economy eliminates the double coincidence of wants.
Before the advent of money, a barter system was used, where goods or services were exchanged directly for other goods or services. In such a system, for a trade to occur, there had to be a mutual desire between two parties, known as the double coincidence of wants. Both parties had to have something the other desired and were willing to exchange.
However, with the introduction of money, a universally accepted medium of exchange, individuals can trade goods or services for money and then use that money to acquire other goods or services from anyone in the economy. Money acts as an intermediary, facilitating transactions and eliminating the need for a direct match of desires between trading partners. This makes transactions more efficient and allows for greater flexibility in economic interactions, ultimately enhancing economic activity.
To know more about economy please visit:
https://brainly.com/question/18461883
#SPJ11
Read Hornung v. Commissioner, 47 T.C. 428 (1967), which involves the constructive receipt doctrine and how it was used to determine the year of inclusion in taxable income. How does the constructive receipt doctrine impact a cash-basis individual's taxable income? What factors could have resulted in a different determination?
The constructive receipt doctrine holds that taxpayers have received income when it's credited to their account, made available for withdrawal, or set aside for their benefit.
This means that income that isn't in the taxpayer's possession is still taxed for the year it's constructively received. This doctrine is essential for cash-based taxpayers, since it determines when income is considered earned and, thus, when it is taxable. Hornung v. Commissioner, 47 T.C. 428 (1967), involved a cash-basis taxpayer who filed his tax returns using the cash basis.
According to the facts of the case, Mr. Hornung entered into a contract to sell his business, including the stock of goods, on December 31, 1958, the final day of the tax year. The contract provided that the purchase price would be paid in installments over three years. The first payment was due on December 31, 1958, and it was subsequently paid on January 2, 1959. Mr. Hornung did not include this payment in his gross income for the year 1958.
Failure to do so could result in a tax assessment, plus interest and penalties. In this case, several factors could have resulted in a different determination, including the timing of the sale, the payment schedule, and whether the buyer would have paid the seller earlier if asked.
To know more about credited visit:-
https://brainly.com/question/24272208
#SPJ11
Which of the following is the lowest risk entry to international markets that Toyota employed?
Group of answer choices
exporting
foreign direct investment
licensing
alliances
Toyota employed the strategy of Exporting as the lowest risk entry to international markets.
What is Exporting?
Exporting is the process of sending goods or services across national borders for the purpose of selling and distributing them. This is a traditional and well-established way for companies to enter foreign markets. Companies that wish to export must first conduct market research, establish a distribution network, and adapt their goods or services to meet the requirements of the international market.Importance of Exporting:Exporting is important to countries, as it generates jobs, produces higher revenues, and increases the standard of living for individuals. Exporting provides businesses with a range of benefits, including the ability to expand their customer base, achieve greater economies of scale, and obtain higher profits.To conclude, Toyota used the strategy of exporting as the lowest risk entry to international markets.
To know more about Exporting, visit:
https://brainly.com/question/28590941
#SPJ11
Consider the following information: Demand rate (D) = 1,500 units per hour Lead time (T) = 8 hours Container capacity (C) = 230 units Safety factor (x) = 15% a. The number of kanban production cards is number.) (Enter your response rounded up to the next whole
We cannot have partial kanban cards, so we need to round it up to the next whole number, which is 13. So, the number of kanban production cards is 13.
What is done?In a production system, kanban is an inventory-control system that governs the flow of production as well as the consumption of parts. A single kanban card indicates that the right to manufacture or consume a certain amount of product has been granted.
It's important to understand the concepts of kanban to answer this question. Let's try to understand the formula for calculating the number of kanban production cards from the given information, Demand rate (D) = 1,500 units per hour Lead time (T) = 8 hours Container capacity (C) = 230 units Safety factor (x) = 15%.
Here, we can use the below-given formula to calculate the number of kanban cards;N = (DT + xC) / C.Where, N is the number of kanban production cards D is the demand rate T is the lead time C is the container capacity x is the safety factor, So, we get N = (1,500 x 8 + 0.15 x 230) / 230= 12.35.
We cannot have partial kanban cards, so we need to round it up to the next whole number, which is 13. So, the number of kanban production cards is 13.
To know more on production cards visit:
https://brainly.com/question/8182132
#SPJ11
You are the production manager for a global business in Australia, manufacturing mining equipment and tools. Manufacturing is located in Australia and the company has strategically placed number of assembly facilities of the mining equipment and tools around the world, closer to the major markets. Sales have significantly dropped in Australia due to increased competition and you have been asked to evaluate where manufacturing of parts should take place of the older product lines in the future.
Explain if you would continue manufacturing in the home country (Australia) or in another location using Product Lifecycle theory (6 marks)
What are some of the advantages and limitations of this theory? (4 marks)
In evaluating whether to continue manufacturing in Australia or move it to another location for older product lines, the Product Lifecycle theory can provide valuable insights.
This theory examines the different stages of a product's life cycle, including introduction, growth, maturity, and decline. Based on the stage of the product's life cycle, the decision to manufacture in the home country or another location can be made. However, it is important to consider the advantages and limitations of this theory before making a final decision.
The Product Lifecycle theory suggests that different stages of a product's life cycle may require different manufacturing strategies. In the case of older product lines with declining sales in Australia, it may be more cost-effective and strategically advantageous to consider manufacturing in another location closer to major markets. This is because as a product reaches the decline stage, production volumes decrease, and it becomes less economically viable to manufacture in higher-cost regions.
The advantages of using the Product Lifecycle theory include:
Cost optimization: By relocating manufacturing to a region with lower labor and production costs, the company can reduce expenses and improve profitability for older product lines.
Market proximity: Placing assembly facilities closer to major markets allows for faster response times, reduced shipping costs, and better customer service, which can help maintain market competitiveness.
However, there are also limitations to consider when applying the Product Lifecycle theory:
Market dynamics: The theory assumes a linear progression through the product life cycle stages, but in reality, market conditions and consumer demands can be unpredictable. Market trends and potential shifts should be carefully analyzed to avoid premature decisions.
Supply chain complexity: Establishing manufacturing facilities in different locations adds complexity to the supply chain, requiring efficient logistics and coordination to ensure smooth operations and timely delivery.
Ultimately, the decision to continue manufacturing in Australia or move it to another location for older product lines should be based on a comprehensive analysis that considers factors beyond just the product life cycle. Factors such as the cost of relocation, availability of skilled labor, regulatory environments, and overall business strategy should also be taken into account. The Product Lifecycle theory can serve as a valuable framework, but it should be complemented with a holistic evaluation of the specific circumstances and objectives of the global business in question.
Learn more about Market dynamics here:- brainly.com/question/30469420
#SPJ11
pharmacy benefit manager (pbm) are companies that only handle:
Pharmacy benefit managers (PBMs) are companies that only handle prescriptions.
Pharmacy benefit managers (PBMs) are third-party administrators of prescription drug plans. They function as intermediaries between insurance companies, pharmacies, and drug manufacturers. They are mainly responsible for the development and management of pharmacy networks, processing and paying prescription drug claims, and negotiating drug prices with drug manufacturers. Thus, pharmacy benefit managers (PBMs) are companies that only handle prescriptions.
Learn more about pharmacy benefit manager https://brainly.com/question/31369872
#SPJ11
When an advertiser creates three versions of the same ad and web users are randomly shown one of the three versions so that the advertiser can determine which ad is superior, the advertiser is engaging in A/C testing A/B/C testing A/B testing B/C testing Social Media Marketing is not free since it requires work to manage a social media presence, so if an employee is managing it, it is costing money. O True O False
Social Media Marketing is not free since it requires work to manage a social media presence, so if an employee is managing it, it is costing money. the statemet is true.
A/B testing, also known as split testing, is a common practice in marketing and advertising. It involves creating multiple versions of an ad or webpage and randomly showing these versions to different users. The purpose is to compare the performance of each version and determine which one yields better results in terms of user engagement, click-through rates, conversions, or other desired metrics.
The advertiser is engaging in A/B testing. A/B testing is a method where different versions of an ad or webpage are shown to users to determine which version performs better in terms of user engagement or conversion rates.
As for the statement about Social Media Marketing, it is true that managing a social media presence requires work and effort, which means it costs money. Therefore, the statement is true. Social Media Marketing is not free.
Learn more about Social Media Marketing here:
https://brainly.com/question/30112535
#SPJ11
Imagine a firm engaged in third degree price discrimination sells its product to consumers in two states, California and Florida. At the profit-maximizing quantities for California and Florida, the firm estimates the price elasticity of demand for its product in California is 2, while in Florida the price elasticity is 2. Accordingly, the firm will charge a higher price to consumers in California. A. B. True False A. B. C. D. [7] Continuing question (6), at the profit-maximizing quantities for California and Florida we know: the marginal revenue in Florida exceeds the marginal revenue in California the marginal revenue in California exceeds the marginal revenue in Florida the marginal revenues in California and Florida equal each other unable to determine, since not enough information is provided [8] Avi is willing to pay $70 to consume a steak dinner at the restaurant Sizzler, but only actually pays $20 for a steak dinner. Accordingly, producer surplus equals: A. B. c. D. $15 $35 $50 unable to determine, since not enough information is provided [9] Which antitrust law below is specifically directed towards the use of price discrimination to attempt to monopolize a market? A. Sherman Act B. Clayton Act c. Price Arbitrage Act D None of the above [10] Imagine two firms, 1 and 2, form a cartel, with the goal of maximizing joint profit. Accordingly, if 1 sticks to its quota level of output, then 2 will wish to produce ___than its quota level of output. A. B. more less [11] Mutual interdependence exists in which of the following markets? A. Monopolistic competition B. Monopoly C. Oligopoly D. All of the above [12] Long-run economic profit is driven to zero in the case of monopolistic competition because of entry and exit. A. B. True False
The question is based on microeconomic concepts, involving third-degree price discrimination, elasticity of demand, marginal revenue, producer surplus, antitrust law, cartel formation, mutual interdependence, and the long-run economic profit. Therefore, the answers to the questions are given below.
1. The given scenario is a case of third-degree price discrimination, which involves charging different prices to different groups of consumers. In this case, the firm estimates the price elasticity of demand for its product in California and Florida, respectively. the price elasticity of demand is higher in California, then the firm will charge a higher price to California consumers. If Therefore, the statement is True.
2. Producer surplus is the difference between the market price and the minimum price a producer is willing to accept for its product. In this case, Avi is willing to pay $70 for a steak dinner, but he only pays $20. Therefore, the producer surplus equals $50.
Hence, the answer is option C.3. The law specifically directed towards the use of price discrimination to attempt to monopolize a market is the Robinson-Patman Act of 1936. It prohibits price discrimination that reduces competition and tends to create a monopoly in any line of commerce.
Therefore, the answer is None of the above.4. A cartel is a group of producers who collude with each other to fix prices and output levels to maximize their joint profit. If one firm sticks to its quota level of output, then the other firm will wish to produce less than its quota level of output.
To know more about interdependence visit :
https://brainly.com/question/31720202
#SPJ11
The _____ between project scope, time, and budget is called the project management ________.
competition, triangle
competition, objectives
conflict, triangle
conflict, objectives
The connection between project scope, time, and budget is called the project management triangle. Project management is a method of organizing and managing resources to accomplish specific goals and objectives.
In order for a project to be successful, a project manager must balance the project's scope, time, and budget. The Project Management Triangle, also known as the Iron Triangle, is a visual representation of the relationship between these three factors. This relationship is represented by a triangle because changes in one area may have an impact on the other two areas.
To know more about Management refer :
https://brainly.com/question/13724491
#SPJ11
iWhen you are on assignment and the job site supervisor asks you to do something different from or in addition to your original job description, you should: Call your Employment Service Representative and get approval before doing it. O Not risk angering the client and do it, but be extremely careful. Tell the job site supervisor to "forget it" and immediately walk off the job. All of the above.
When you are on assignment and the job site supervisor asks you to do something different from or in addition to your original job description, you should: Call your Employment Service Representative and get approval before doing it.
Answer: Call your Employment Service Representative and get approval before doing it.Job descriptions are a vital component of human resource management since they provide information about the responsibilities, duties, and tasks of a job. Furthermore, a job description specifies the knowledge, abilities, and expertise required to complete the job's tasks.
Hence, when you are on assignment and the job site supervisor asks you to do something different from or in addition to your original job description, you should Call your Employment Service Representative and get approval before doing it.
This is because your supervisor may be unaware of the requirements of your job, and if you agree to do something that isn't included in your job description, it may backfire on you or your client. Your job could be at stake if you can't complete the job, or you might end up with a poor performance evaluation that could hurt your chances of being placed in future jobs.
For more questions on: Employment
https://brainly.com/question/27404382
#SPJ8
For the year 2020/21 tax year, Jepson Ltd, a resident large public company, has the following profit/loss in relation to its income and expenses:
income:
Rental income received from tenants 160m
Fully franked distributions: resident public companies 15m
Unfranked distributions: resident public companies 10m 185m
Less expense:
interest in borrowings to purchases shares in public companies 85m 85m
Net income
$100m
(NB m=milion)
require:
In your responses below, ensure you state the appropriate legislation, tax rulings or common law cases to support the answer and calculation.
p1: determine the taxable income for jepson Ltd for the 2020/21 tax year
To determine the taxable income of Jepson Ltd for the year 2020/21, we need to take into account the income and expenses of the company.The Income Tax Assessment Act 1997 provides the rules and regulations for calculating taxable income.
According to the given information, Jepson Ltd had an income of $185 million from rental income received from tenants, fully franked distributions, and unfranked distributions from resident public companies. They had an expense of $85 million on the interest on borrowings to purchase shares in public companies. Therefore, the net income of the company is $100 million.To determine the taxable income of Jepson Ltd, we need to deduct all the allowable expenses from the gross income. To calculate the taxable income of Jepson Ltd, we need to apply the following formula:Taxable Income = Gross Income – Allowable DeductionsTherefore, the taxable income of Jepson Ltd for the year 2020/21 tax year is:Taxable Income = $185 million - $85 millionTaxable Income = $100 million.
Taxable income is the income that is subject to income tax. To calculate taxable income, we need to take into account all the income and expenses of the company and deduct the allowable expenses from the gross income. In the case of Jepson Ltd, the taxable income for the year 2020/21 is $100 million.The Income Tax Assessment Act 1997 provides the rules and regulations for calculating taxable income. Section 6-1 of the Income Tax Assessment Act 1997 defines assessable income as the amount of income that is subject to income tax. Section 8-1 of the Income Tax Assessment Act 1997 provides the rules for calculating gross income. According to Section 8-1 of the Income Tax Assessment Act 1997, the gross income includes all amounts that are received by the taxpayer in the course of carrying on a business or investment.In conclusion, Jepson Ltd's taxable income for the year 2020/21 tax year is $100 million. The taxable income is calculated by deducting the allowable expenses from the gross income. The Income Tax Assessment Act 1997 provides the rules and regulations for calculating taxable income.
To know more about taxable income visit :-
https://brainly.com/question/30617249
#SPJ11
Which of the following are two dimensions of product quality? A. Level and consistency B. Consistency and accuracy C. Reliability and level D. Accuracy and reliability (3). Which of the following are examples of shopping products? A. Furniture, clothing, used cars, major appliances, and hotel and airline services B. Laundry detergent, candy, magazines, and fast food C. Branded cars, high-priced photographic equipment, and designer clothes D. Life insurance, preplanned funeral services, and blood donations to the Red Cross
The two dimensions of product quality are Accuracy and reliability. Examples of shopping products are Furniture, clothing, used cars, major appliances, and hotel and airline services.
(1) The two dimensions of product quality are Accuracy and reliability.
Explanation: Accuracy and reliability are two dimensions of product quality. Accuracy refers to the degree to which a product meets the specifications that were established for it. Reliability refers to the consistency of a product's performance. A reliable product performs consistently well over time, whereas an unreliable product may work well for a while and then suddenly stop working.
(2) Examples of shopping products are Furniture, clothing, used cars, major appliances, and hotel and airline services.
Explanation: Shopping products are products that people buy less frequently than convenience products, and they are willing to invest more time and effort into comparing and evaluating different options before making a purchase decision. Furniture, clothing, used cars, major appliances, and hotel and airline services are examples of shopping products.
To know more about Accuracy and reliability visit:
https://brainly.com/question/30064578
#SPJ11
In general, when dealing with the bond market, do bondholders fare better when the yield to maturity increases or when it decreases? More specifically, bondholders fare worse when the yield to maturity. A). decreases, since this represents an increase in the price of the bond and a decrease in potential capital losses. B). increases, since this represents a decrease in the bond maturity and a decrease in potential capital losses. C). decreases, since this represents an increase in the coupon payment and an increase in potential capital gains. D). increases, since this represents a decrease in the price of the bond and an increase in potential capital losses.
Bondholders fare better when the yield to maturity decreases as it represents an increase in the price of the bond and a decrease in potential capital losses. Hence, option A is the correct answer.
When dealing with the bond market, bondholders fare better when the yield to maturity decreases since this represents an increase in the price of the bond and a decrease in potential capital losses.Bondholders are lenders and they profit from receiving periodic interest payments from the borrower (issuer) and return of principal at maturity. The yield to maturity is the rate of return that a bondholder earns from holding the bond to maturity and is the total return earned on a bond that has been held till maturity.A bond's yield is directly related to its price. When the bond price increases, the yield decreases. When the bond price decreases, the yield increases. Hence, the bondholders will be better off if the yield to maturity decreases and the price of the bond increases.Bondholders face capital losses when the yield to maturity increases, causing the bond price to decrease. The bond's price falls because new bonds issued in the market have a higher yield and become more attractive to investors, causing the price of the existing bonds to decrease until their yield matches the current market yield. As the bond's price decreases, bondholders who sell the bond before maturity face capital losses.
Learn more about Bondholders here:-
https://brainly.com/question/14286548
#SPJ11
Given the short-run production function: Q=120L² - L³, where Q is Total Product and L is labour input, (a) Find MP and AP of labour (b) Find the value of L that maximizes Total Product (c) Find the value of L that maximizes Marginal Product (d) Find the value of L that maximizes Average Product (e) CAREFULLY graph TP, MP, AP and label all the critical points you found in parts b-d.
(a) Find MP and AP of labor: MP is short for Marginal Product, and AP is short for Average Product. To get the MP and AP, we must first find out what the Total Product is (Q). Given: Q = 120L² - L³
First, we'll find the first derivative of Q to get the MP. We'll then take the second derivative of Q to determine the sign of MP and whether it's increasing or decreasing. MP = 240L - 3L²MP = L(240 - 3L) To get the critical values, set MP equal to 0, and then solve for L. L(240 - 3L) = 0L = 0 or L = 80 Hence, the critical points are L = 0 and L = 80To get the AP, we'll use the formula below: AP = Q/LAP = 120L - L²AP = L(120 - L)/LAP = 120 - L For the critical points, we have: L = 0 => AP = 0L = 80 => AP = 40
(b) Find the value of L that maximizes Total Product To get the value of L that maximizes TP, we'll set Q equal to 0 and then solve for L.Q = 120L² - L³Q = L²(120 - L) Set Q = 0L = 0, or L = 120 The critical values are L = 0, and L = 120. Since L = 0 is not feasible, the only value of L that maximizes TP is L = 120.
(c) Find the value of L that maximizes Marginal Product: To get the value of L that maximizes MP, we'll set MP equal to 0, and then solve for L. L(240 - 3L) = 0L = 0 or L = 80 The critical values are L = 0 and L = 80. We know that MP is increasing when L < 80 and decreasing when L > 80. Therefore, L = 80 maximizes MP.
(d) Find the value of L that maximizes Average Product: To get the value of L that maximizes AP, we'll set AP equal to 0, and then solve for L. AP = 120 - LL = 120 The critical value is L = 120. Graph of TP, MP, and AP: The graph is shown below with all of the critical points labeled.
To obtain the graph, we used the values for Q, MP, and AP that we calculated in parts (a) through (d).
To know more about Marginal Product visit:
https://brainly.com/question/31050533
#SPJ11
Match each mathematical expression to the term below which represents its meaning: ALD/Aw is ACost/AK is ACost/AL is AQ/AL is ARevenue/AL is AProfit/AL is AMPL/AMPK is AMPPL/AMPPK is ACost/AQ is AProfit/AQ is AProfit/ARevenue is ARevenue/AQ is %ALD/%Aw is Aw/ALD is %Aw/%ALD is AQ/AK is Enter "1" for Marginal rate of technical substitution Enter "2" for Elasticity of labour demand Enter "3" for Marginal physical product of capital Enter "4" for Marginal product of labour Enter "5" for Marginal revenue Enter "6" for Marginal cost of production Enter "7" for Marginal cost of labour Enter "8" for None of the above
Here are the mathematical expressions matched to the terms which represent their meanings:ALD/Aw is %ALD/%Aw is Elasticity of labour demand.
Cost/AK is ACost/AQ is Cost per unit of capital is Marginal cost of production.Cost/AL is ACost/AQ is Cost per unit of labour is Marginal cost of production.Q/AL is MPL is Marginal product of labour.Revenue/AL is MRP is Marginal revenue product.Profit/AL is MVP is Marginal value product.
MPL/MPK is Marginal rate of technical substitution (MRTS).PP/MPK is Marginal physical product of capital (MPPK).Cost/Q is Marginal cost of production (MC).Profit/Q is Marginal profit of production (MP).Profit/Revenue is Profit margin (PM).Revenue/Q is Price (P).AQ/AK is Capital-labour ratio (K/L).
Thus, 1 corresponds to Marginal rate of technical substitution, 2 corresponds to Elasticity of labour demand, 3 corresponds to Marginal physical product of capital, 4 corresponds to Marginal product of labour, 5 corresponds to Marginal revenue, 6 corresponds to Marginal cost of production, 7 corresponds to Marginal cost of labour, and 8 corresponds to None of the above.
To know more about rate , visit
https://brainly.com/question/25565101
#SPJ11
