the multi-step process used when creating a new system is referred to as ____.

Answers

Answer 1

The multi-step process used when creating a new system is referred to as system development life cycle (SDLC).

The system development life cycle (SDLC) is a process used by software developers, project managers, and other professionals to create and maintain software systems. The SDLC consists of several stages, including planning, analysis, design, implementation, and maintenance. During the planning stage, the goals and requirements of the system are identified, and a project plan is created. The analysis stage involves gathering and analyzing data about the existing system, as well as the needs and requirements of users. In the design stage, the system is designed to meet the requirements identified in the previous stages. The implementation stage involves the actual creation of the system, followed by testing and debugging. Finally, during the maintenance stage, the system is monitored and updated to ensure that it continues to meet the needs of users.

The SDLC provides a structured approach to system development, which helps to ensure that the resulting system is effective, efficient, and reliable. By following a systematic process, developers can identify and address potential problems before they occur, and ensure that the system meets the needs of users.

Learn more about the system development life cycle here:

brainly.com/question/28498601

#SPJ11


Related Questions

What encoding scheme is used by the 802.11a and 802.11g standards but not by the 802.11b standard?A. OFDMB. IrDAC. FHSSD. DSSS

Answers

The encoding scheme used by both the 802.11a and 802.11g standards, but not by the 802.11b standard, is OFDM (Orthogonal Frequency Division Multiplexing).

OFDM is a digital modulation technique that divides a single high-speed data stream into multiple lower-speed substreams. It does this by using a large number of closely spaced orthogonal subcarriers that are each modulated with a low rate data stream. This results in a highly efficient use of bandwidth and allows for higher data rates and improved performance in noisy environments. The 802.11b standard, on the other hand, uses the DSSS (Direct Sequence Spread Spectrum) encoding scheme. DSSS spreads the signal over a wider bandwidth than necessary to transmit the information, making it more resistant to interference. However, it is less efficient in terms of bandwidth usage and has a lower maximum data rate compared to OFDM.

Overall, the use of OFDM in the 802.11a and 802.11g standards has contributed to their improved performance and increased data rates compared to the 802.11b standard.

Learn more about bandwidth here: https://brainly.com/question/28436786

#SPJ11

As computers gained popularity, the ____ typewriters decreased along with the price.
a) manual
b) electric
c) electronic
d) portable

Answers

a) manual As computers gained popularity, the demand for manual typewriters decreased along with the price.

As computers became more popular, they gradually replaced manual typewriters in offices and homes. The convenience of electronic documents, email, and the ability to edit and format text easily with software made computers a more efficient choice. As the demand for manual typewriters decreased, manufacturers had to reduce their prices to compete with electronic alternatives, leading to a decline in profitability. With the rise of personal computers in the 1980s and 1990s, manual typewriters became nearly obsolete, and production decreased dramatically. Today, manual typewriters are mostly used as collectibles or for specialized purposes such as addressing envelopes or filling out forms that require carbon copies.

Learn more about typewriters here;

https://brainly.com/question/30435893

#SPJ11

Which of the following was a proposed structural remedy in the Microsoft case that began in 1998?
A.) Forcing Microsoft to include rival Internet browsers in its operating system
B.) Splitting Microsoft into multiple companies

Answers

B.) Splitting Microsoft into multiple companies was a proposed structural remedy in the Microsoft case that began in 1998.

The United States Department of Justice (DOJ) and several US states sued Microsoft in 1998 for antitrust violations, alleging that the company had engaged in anti-competitive practices to maintain its dominance in the personal computer operating systems market.

As part of the lawsuit, the DOJ proposed that Microsoft be split into separate operating systems and applications companies to prevent it from using its monopoly power to stifle competition in other markets. This proposal was known as the "structural remedy."

However, after a lengthy legal battle, a settlement was reached in 2001 that did not involve the breakup of Microsoft. Instead, the company agreed to a series of conduct remedies aimed at preventing future antitrust violations, such as allowing computer manufacturers to install rival software on Windows PCs and providing access to Windows' application programming interfaces (APIs) to other software developers.

Learn more about Microsoft here:

https://brainly.com/question/26695071

#SPJ11

Navigate to the named cell range appheading2 and delete only the contents, leaving the empty cells.
a. Ctrl+Shift+Delete b. Ctrl+Delete c. Alt+Delete d. Shift+Delete

Answers

The correct answer is b. Ctrl+Delete. To navigate to the named cell range "appheading2" and delete only the contents, leaving the empty cells.

You can follow these steps:

Click on any cell in the worksheet to activate it.

Press the F5 key on your keyboard to open the "Go To" dialog box.

Type "appheading2" in the "Reference" field of the dialog box and click on the "OK" button to select the named cell range.

Press the Ctrl+Delete keys on your keyboard to delete only the contents of the selected cells, leaving the empty cells.

Note that using Ctrl+Shift+Delete or Shift+Delete would delete the entire cells (including their contents and formatting), while Alt+Delete would delete the contents of the cells and shift the remaining cells to the left.

Learn more about Delete here:

https://brainly.com/question/14690979

#SPJ11

why the total number of possible hounsfield values that may be assigned to any one pixel is approximately:

Answers

The Hounsfield scale is a quantitative scale that expresses the radiodensity of a material in Hounsfield units (HU). It was developed by Sir Godfrey Hounsfield, who invented the CT scanner.

The Hounsfield scale ranges from -1000 HU (air) to +1000 HU (dense bone), with water at 0 HU. The Hounsfield values of different tissues depend on their atomic composition and density. For example, bone has a higher Hounsfield value than soft tissue because it is denser and contains more calcium.

The total number of possible Hounsfield values that may be assigned to any one pixel is approximately 2048 because of the way CT scanners work. A CT scanner measures the attenuation of X-rays as they pass through the body. The detector in the scanner converts the X-rays into electrical signals, which are then processed by a computer to create an image.

The Hounsfield scale is quantized into 4096 bins (or levels), each representing a specific range of Hounsfield values. The highest and lowest bins are reserved for CT scanner artifacts and air, respectively. The remaining 4094 bins are used to represent the Hounsfield values of different tissues.

To know more about Hounsfield scale click this link -

brainly.com/question/27975080

#SPJ11

the ____ format allows users to share documents with others easily.

Answers

The Portable Document Format (PDF) allows users to share documents with others easily.

The explanation for this is that PDF is a universal file format designed to preserve the formatting and content of a document, regardless of the device or software it is viewed on. This means that the appearance of the document will remain consistent, making it ideal for sharing with others.
PDFs are widely used for their ability to maintain layout and formatting, which is essential when distributing important documents such as contracts, manuals, or reports. In addition, PDF files can be password protected, ensuring confidentiality and security.
In conclusion, the PDF format is a versatile and efficient solution for sharing documents, as it ensures consistent appearance and compatibility across different devices and software, and provides security features for protecting sensitive information.

To know more PDFs visit:

brainly.com/question/31064509

#SPJ11

Which keyword can be used in a Mac operating system terminal shell to access administrator rights?
ps
sudo
cp
mv

Answers

The keyword that grants administrator rights in a Mac terminal shell is "sudo". This command allows users to perform administrative tasks even if they don't have administrator privileges.

In the terminal shell of the Mac operating system, the word "sudo" can be used to get administrator rights. "Superuser Do" (sudo) is a command that enables users to carry out administrative actions in the terminal shell even without administrator rights. The user can run a command with elevated privileges by using the sudo command, a space, and then the command that needs administrative rights. To confirm their right to use sudo, the user will be requested to provide their password. The sudo command may be a strong tool, but it must be used carefully since it gives elevated rights that, if mishandled, might possibly harm the system.

learn more about Mac terminal shell is "sudo" here:

https://brainly.com/question/1233475

#SPJ11

The ____ macro action will move the focus to a specific controlGoToControlCombo BoxForm Design

Answers

The "GoToControl" macro action will move the focus to a specific control in a form design.

This macro action allows you to specify the name or ID of the control you want to move the focus to, typically using a combo box or a text box. By using the "GoToControl" macro action, you can programmatically navigate through the controls in a form, making it easier to manipulate and interact with the form's elements.

This macro action is commonly used in Microsoft Access or other form-based development environments to enhance user experience and streamline data entry or navigation processes. It helps ensure that users can easily move between different controls within a form, improving usability and efficiency.

To know more about macro action click here:

https://brainly.com/question/7206467

#SPJ11

by default, where will backups of dhcp be sent when you configure backups to occur?

Answers

When you configure backups to occur in DHCP (Dynamic Host Configuration Protocol), the backup files will be sent to a default location specified in the DHCP server's settings. The location can vary depending on the operating system being used.

For example, in Windows Server 2016, the default location for storing DHCP backups is "C:\Windows\System32\dhcp\backup". This location can be changed based on the user's preferences and requirements.

It is important to regularly backup DHCP configurations to ensure that in the event of a failure or crash, the network can be restored quickly and efficiently. The backup files contain information about the DHCP scope, options, and lease information which is essential for the smooth functioning of the network.

To summarize, the default location for storing DHCP backups can differ depending on the operating system being used, but it can usually be found in the DHCP server's settings. Regularly backing up DHCP configurations is crucial for maintaining a stable and reliable network infrastructure.

Know more about Dynamic Host Configuration Protocol here:

https://brainly.com/question/28584324

#SPJ11

In your encryption algorithm, you swapped adjacent characters. Which algorithm did you use?substitutiontranspositionexpansioncompaction

Answers

In your encryption algorithm, you swapped adjacent characters, which means you used a transposition algorithm. This type of algorithm rearranges the characters in the plaintext to create the ciphertext, without changing the actual characters themselves.

An encryption algorithm is a mathematical function that is used to transform data into a form that is unreadable to unauthorized parties. Encryption algorithms are used to protect sensitive information from being intercepted or accessed by unauthorized users.

There are several types of encryption algorithms, including:

Symmetric encryption: This type of encryption uses the same key to encrypt and decrypt data. The key is a shared secret between the sender and receiver of the data.

Asymmetric encryption: This type of encryption uses two keys - a public key and a private key. The public key is used to encrypt data, while the private key is used to decrypt it.

Hashing: This is a one-way encryption algorithm that generates a unique fixed-length string of characters, known as a hash, from a message or data. The hash is used to verify the integrity of the data, but it cannot be decrypted to recover the original data.

To learn more about Encryption algorithm Here:

https://brainly.com/question/10603926

#SPJ11

the first style sheet interpreted by the browser is the one built in to the browser itself.
T/F

Answers

True.

When a browser loads a webpage, it first looks for any built-in style rules that are part of its own default stylesheet. If the webpage being loaded has any conflicting styles, the browser will use the cascading order and specificity rules to determine which styles to apply. If there are no conflicting styles, the browser will simply use its own built-in styles.

Long answer: The browser's default stylesheet is essentially a set of pre-defined styles that are applied to every webpage that is loaded in that browser. These styles are built into the browser itself and are not part of any external stylesheet that may be linked to the webpage. The default stylesheet includes styles for common HTML elements like headings, paragraphs, links, and lists, as well as styles for form elements like input fields, buttons, and dropdown menus. When a webpage is loaded in the browser, the browser first looks for any styles that are defined in the webpage's external stylesheets. These stylesheets can be linked to the webpage in the HTML code, and they can be hosted on the same server as the webpage or on a separate server. If there are conflicting styles between the external stylesheet and the browser's default stylesheet, the browser will use the cascading order and specificity rules to determine which styles to apply. If there are no conflicting styles between the external stylesheet and the default stylesheet, the browser will simply use the default styles. This is why it's important for web developers to be aware of the default styles in different browsers and to test their webpages in multiple browsers to ensure that their designs are consistent across different platforms.

To know more about browser visit:

https://brainly.com/question/28504444

#SPJ11


The first 3 bytes of an XIF file are exactly the same as a TIF file.
TRUE or FALSE?

Answers

TRUE. The XIF (eXtended Image Format) file is a type of file format that is used for storing and exchanging images. It is an extension of the TIF (Tagged Image File) format, which is a popular image format used for storing high-quality graphics and photographs.

The first 3 bytes of both XIF and TIF files are the same, which is "II*" or "MM*". These bytes are known as the "magic number" and they indicate the byte order of the file. "II*" indicates that the file is in little-endian byte order, while "MM*" indicates that the file is in big-endian byte order. In summary, the first 3 bytes of an XIF file are exactly the same as a TIF file, which is "II*" or "MM*". This is because the XIF format is an extension of the TIF format and both formats use the same magic number to indicate the byte order of the file. Knowing this can be useful for identifying and distinguishing between different file formats, especially when dealing with large numbers of image files.

Learn more about Tagged Image File here-

https://brainly.com/question/30209201

#SPJ11

using dwdm, a single fiber can carry between what two numbers of channels? a. ​60b. ​80c. ​160d. ​200

Answers

The long answer to your question is that the number of channels that can be carried by a single fiber using DWDM technology can vary depending on the specific implementation and the capabilities of the equipment being used.

In general, however, modern DWDM systems are capable of supporting hundreds of channels on a single fiber. The range of channels that can be supported can be influenced by a variety of factors, including the wavelength spacing between channels, the quality of the fiber optic cable being used, and the strength and stability of the optical signals being transmitted.

Some systems may be capable of supporting as few as 60 channels, while others may be able to support as many as 200 or more. Ultimately, the number of channels that can be supported will depend on a range of technical considerations and will be determined by the specific DWDM system being used.

To know more about channels  visit:-

https://brainly.com/question/30891719

#SPJ11

how can an assistant avoid a breach of patient confidentiality when using a patient sign-in sheet?

Answers

To avoid a breach of patient confidentiality when using a patient sign-in sheet, an assistant can take the following measures:

Use a Confidential Sign-In Sheet: Implement a sign-in sheet that protects patient privacy. Instead of displaying patient names in a visible column, use a confidential sign-in sheet that only reveals minimal information, such as a unique identifier or appointment time.

Position the Sign-In Sheet Strategically: Ensure that the sign-in sheet is placed in a location where it is not easily visible to other patients or individuals who should not have access to patient information. Position it away from the waiting area or use privacy screens to obscure the view.

Educate Patients on Confidentiality: Provide clear instructions to patients regarding the sign-in process and emphasize the importance of maintaining confidentiality. Advise them to use discretion when signing in and to protect their own privacy by not sharing sensitive information in the sign-in sheet.

Regularly Monitor and Collect Sign-In Sheets: Regularly check the sign-in sheet and promptly collect it once patients have signed in. This prevents unauthorized individuals from accessing patient information and reduces the risk of accidental exposure.

Securely Store and Dispose of Sign-In Sheets: After collecting the sign-in sheets, ensure they are stored securely in a locked cabinet or area with limited access. When disposing of the sheets, use proper document destruction methods, such as shredding, to safeguard patient information.

Consider Electronic Sign-In Systems: Explore the use of electronic sign-in systems or patient portal platforms that provide secure and confidential sign-in options. These systems can offer enhanced privacy controls and encryption to protect patient information.

Learn more about safeguarding patient here:

https://brainly.com/question/31920072

#SPJ11

what is the advantage, if any, of using cell references instead of just typing values?

Answers

The advantage of using cell references instead of just typing values is that it allows for easier manipulation of data.

If you type values directly into a formula, you have to change each value individually if you want to make a change. However, if you use cell references, you can simply update the value in the referenced cell and the formula will automatically update. This saves time and reduces the risk of errors. Additionally, cell references allow for more complex formulas that refer to multiple cells, making it easier to perform calculations on larger sets of data. Overall, using cell references can improve efficiency, accuracy, and flexibility in data analysis.

learn more about cell references here:

https://brainly.com/question/31171096

#SPJ11

other than the default computer group, how many other groups may a computer be assigned to in wsus?

Answers

A computer in WSUS can be assigned to a maximum of four groups, including the default group.

WSUS allows for computers to be organized into groups for better management and targeting of updates. By default, all computers are placed into the "All Computers" group, but administrators can create additional groups and assign computers to them. Each computer can be a member of up to four groups, including the default group. This allows for more granular control over which updates are deployed to specific sets of computers, based on their grouping.

learn more about computers here:

https://brainly.com/question/30146762

#SPJ11

To include all fields in the design grid, double-click the question mark (?) in the field list. True /False

Answers

FALSE The statement "To include all fields in the design grid, double-click the question mark (?) in the field list" is False. Instead, to include all fields in the design grid, you should double-click the asterisk (*) in the field list.

The statement is false, as the correct symbol to include all fields in the design grid of a Microsoft Access query is the asterisk (*), not the question mark (?). Double-clicking the question mark in the field list will bring up the Expression Builder, which allows you to create more complex expressions using functions and operators. The asterisk, on the other hand, is a wildcard character that represents all fields in the table or query and is often used to display all available fields in the design grid for ease of use. Double-clicking the asterisk will add all fields to the design grid in Access.

Learn more about design grid here;

https://brainly.com/question/9830945

#SPJ11

windows disk cleanup is the utility to use whenever you want to defragment your hard drive. True or False

Answers

False.  Windows Disk Cleanup is a utility in Windows operating system that allows you to free up space on your hard drive by removing temporary files, system files, and other unnecessary files that can take up space on your hard drive. It does not defragment your hard drive.

Disk defragmentation, on the other hand, is a different utility in Windows that reorganizes fragmented data on your hard drive to make it run more efficiently.

It can improve the speed and performance of your computer by reducing the amount of time it takes to access files and programs. You can run the Disk Defragmenter utility in Windows by typing "defrag" in the search bar and selecting "Defragment and Optimize Drives" from the search results.

Learn more about Windows Disk Cleanup here:

https://brainly.com/question/30044928

#SPJ11

Which of the following data types can be synchronized to a mobile device by default? (Select
TWO).
A. Biometric information
B. Pictures
C. Contacts
D. Credentials
E. SMS

Answers

The two data types that can be synchronized to a mobile device by default are contacts and pictures. This means that when you set up a new mobile device and sign in with your account, your contacts and pictures will automatically sync to the device.

Biometric information, Credentials, and SMS are not typically synchronized by default. However, some apps may allow you to sync biometric data such as fingerprints or facial recognition, and you may be able to manually sync SMS messages if you use a messaging app that offers this feature.

Overall, the data types that can be synchronized to a mobile device depend on the specific device, operating system, and apps that you use.

To know more about mobile device visit:-

https://brainly.com/question/4673326

#SPJ11

the first step in building an entity-relationship diagram (erd) is _____.

Answers

The first step in building an Entity Relationship Diagram (ERD) is to identify the entities and relationships that are relevant to the system being modeled. Entities are the objects or concepts that are important to the system, and relationships are the associations between these entities.

It is important to have a clear understanding of the system being modeled in order to identify the relevant entities and relationships. Once these have been identified, they can be represented in the ERD using symbols such as rectangles for entities and lines for relationships.

To identify the entities, you will need to carefully analyze the problem statement, requirements, or business scenario. Entities are the main objects or components that the system will manage, store, and interact with. Examples of entities could be customers, products, or employees. Once you have identified the entities, you can then move on to defining their relationships, attributes, and cardinalities, as you continue building the ERD.

To Know more about Entity Relationship Diagram visit;

https://brainly.com/question/31809359

#SPJ11

The act of breaking a system into its component subsystems, processes, and sub-processes is known as:
a. composition
b. generalization
c. normalization
d. none of the above

Answers

The act of breaking a system into its component subsystems, processes, and sub-processes is known as normalization.

Normalization is a process used in database design to break down a database into smaller, more manageable parts. It involves dividing a larger database into smaller tables and defining relationships between them. This process helps to eliminate redundancy and ensure data consistency and accuracy.

In software engineering, system decomposition is a process similar to normalization that involves breaking down a larger system into smaller, more manageable parts. This process helps to simplify the design and implementation of the system, making it easier to maintain and modify over time.

In summary, the act of breaking a system into its component subsystems, processes, and sub-processes is known as system decomposition or normalization.

Learn more about subsystems here:

https://brainly.com/question/29315206

#SPJ11

What tool can a data analyst use to figure out how many identical errors occur in a dataset?
1. CONFIRM
2. CASE
3. COUNTA
4. COUNT

Answers

To figure out how many identical errors occur in a dataset, a data analyst can use the COUNTIF function in a spreadsheet tool such as Microsoft Excel or Ggle Sheets.

The COUNTIF function counts the number of cells within a specified range that meet a certain criterion. In this case, the criterion would be the specific error that the analyst wants to count. The syntax for the COUNTIF function is as follows:

=COUNTIF(range, criterion)

The 'range' parameter is the range of cells that the function should count, and the 'criterion' parameter is the condition that the function should test for.

For example, suppose an analyst wants to count the number of cells in column A that contain the word "error". The formula would be:

=COUNTIF(A:A, "error")

This formula will count the number of cells in column A that contain the word "error" and return that value.

Therefore, the answer to the question is not one of the options provided. Instead, the tool that can be used is the COUNTIF function in a spreadsheet tool such as Microsoft Excel or Ggle Shets.

Learn more about dataset here:

https://brainly.com/question/31190306

#SPJ11

is the term client–server out of date even though the concept is still needed?

Answers

No, the term "client-server" is still widely used today to describe a model of communication between two networked computers.

Where one computer (the client) requests information or services from another computer (the server). This concept is still very relevant in modern computing, as many software applications, websites, and online services still use client-server architecture.

However, with the rise of cloud computing and distributed systems, new terms like "microservices" and "serverless" have emerged to describe alternative ways of organizing and deploying applications in the cloud. Nonetheless, the client-server model remains a fundamental and widely used concept in modern computing.

To know more about  networked computers, click here:

https://brainly.com/question/13992507

#SPJ11

the currency data type is accurate up to 4 digits on the right side of the decimal point true or false

Answers

False. The currency data type can be accurate up to 4 digits on the right side of the decimal point, but it can also be accurate up to 5 or more digits.

The accuracy of the currency data type depends on the programming language and the specific implementation. In some cases, the data type may be limited to 4 digits on the right side of the decimal point, while in others it may support more digits. It is important to consult the documentation for the programming language or platform being used to determine the level of accuracy provided by the currency data type. Additionally, it is important to consider rounding errors and other factors that can affect the precision of calculations involving currency values.

learn more about data here:

https://brainly.com/question/27211396

#SPJ11

next, your interviewer wants to know more about your understanding of tools that work in both spreadsheets and sql. she explains that the data her team receives from customer surveys sometimes has many duplicate entries. she says: spreadsheets have a great tool for that called remove duplicates. in sql, you can include distinct to do the same thing. in which part of the sql statement do you include distinct?

Answers

Yes, when using the Remove Duplicates feature, your team will need to remove duplicate data from the table before transferring it to the database.

What is a spreadsheet database?

A spreadsheet is a computer program that arranges data in a series of rows and columns. In this electronic document, data is stored in separate cells. We can compare spreadsheet with ebooks. Information are collected from external table in database, instead of data stored in individual cells.

Here is how wto use  a spreadsheet as a database

Step 1: Set up a data spreadsheet framework. Open Excel spreadsheet, and put your cursor in A 1 cell, then type database title.

Step 2: Add or import data.

Step 3: Convert the data into a table.

Step 4: Format the table.

Step 5: Save your database spreadsheet.

Learn more about database:
https://brainly.com/question/30634903
#SPJ4

What WAP settings should be adjusted in an environment with overlapping Wi-Fi signals?
A) Encryption protocols
B) SSID and MAC filtering
C) Channel and frequency
D) Default user name and password

Answers

The WAP settings that should be adjusted in an environment with overlapping Wi-Fi signals are "channel and frequency".

When multiple wireless access points (WAPs) are operating in the same area, their signals may overlap and interfere with each other. This can result in poor signal quality and slow data transfer speeds for users. To mitigate this problem, the channel and frequency settings of the WAPs can be adjusted. By selecting a channel and frequency that are less congested, the WAP can reduce interference and provide better signal quality. Wi-Fi analyzers or scanners can be used to identify which channels and frequencies are being used by other WAPs in the area, and the WAP can be configured accordingly. Other settings, such as encryption protocols and SSID and MAC filtering, are important for security but do not directly address the issue of overlapping Wi-Fi signals. Default user name and password settings are also important to change for security purposes but do not affect signal quality.

Learn more about Wireless access points (WAPs) here:

https://brainly.com/question/27334545

#SPJ11

Which three statements describe the similarities between OSPFv2 and OSPFv3?
They both are link-state protocols,
They both share the concept of multiple areas and They both use the same DR/BDR election process.

Answers

The three statements that describe the similarities between OSPFv2 and OSPFv3 are: 1. They both are link-state protocols. 2. They both share the concept of multiple areas. 3. They both use the same DR/BDR election process.

OSPFv2 and OSPFv3 are both routing protocols that use the link-state protocol (LSP) to share information about network topology. This allows routers to build a complete and accurate view of the network, and to make informed routing decisions. Additionally, both versions of OSPF support the concept of multiple areas, which allows for more efficient routing and scalability in larger networks. Another similarity between OSPFv2 and OSPFv3 is their use of the designated router (DR) and backup designated router (BDR) election process. This process ensures that there is a clear hierarchy of routers within an area, and reduces the amount of traffic that needs to be exchanged between routers.

learn more about OSPFv2 here:

https://brainly.com/question/13487134

#SPJ11

True/False: The faster the spindle rotates on a traditional magnetic drive, the better performance it will have.

Answers

False. While a faster spindle rotation can lead to faster data transfer rates, it does not necessarily mean better performance.

Other factors, such as seek time, access time, and transfer rate also impact the overall performance of a traditional magnetic drive. Additionally, faster spindle rotation can also lead to increased noise, heat, and power consumption. In recent years, solid-state drives (SSDs) have become a popular alternative to traditional magnetic drives due to their faster performance and lower power consumption.

learn more about spindle rotation here:

https://brainly.com/question/31702397

#SPJ11

What's the recommended way to protect a WPA2 network? Check all that apply.Use a long complex passphrase, Use a unique SSID

Answers

The recommended way to protect a WPA2 network includes using a long complex passphrase and using a unique SSID. Both of these measures contribute to improved security and help prevent unauthorized access to the network.

To know more about WPA2 networks click here:

brainly.com/question/31931978

#SPJ11

Which of the following refers to a graphic that can be moved independently of the surrounding text?
◦ Shape
◦ Layout object
◦ Floating object
◦ Inline object

Answers

The graphic that can be moved independently of the surrounding text is called a floating object.

Floating objects are typically used to enhance the visual appeal of a document or presentation. They can be positioned anywhere on the page and can be resized, rotated, or moved around as needed. Floating objects are different from inline objects, which are positioned within the text and move along with it. Inline objects are typically used for images or other graphics that are directly related to the text they are embedded in.

Layout objects, on the other hand, refer to the overall arrangement of elements on a page or screen. They can include text, graphics, and other design elements, and are used to create a visually appealing and functional layout. Shapes are graphic elements that can be used to add visual interest to a document or presentation. They can be used to create diagrams, flowcharts, or other visual aids.

In summary, if you want to move a graphic independently of the surrounding text, you should use a floating object. This will allow you to position the graphic exactly where you want it and make any adjustments necessary to create the perfect layout.

Learn more on floating objects here:

https://brainly.com/question/19054094

#SPJ11

Other Questions
In the figure below, ZPQR ZRSP both equal 90 degrees.RWhich criterion statement can be used to prove that APQR RSP? T/F When using the IIF function, each part of the function is separated by a COLON. What are two common types of circuit-switched WAN technologies? (Choose two.)A. ISDNB. DSLC. PSTND. ATME. Frame Relay Please help and show work what is the software that makes the benefits of cloud computing possible, such as multi-tenancy? WILL GIVE BRAINLIEST IF CORRECTExplain reasoning Reduce the fraction below to their lowest term 70/3 = when registered nonvoters are asked why they did not vote, they are most likely to refer to 129. (Consider This) The feudal practice of clipping coins illustrates the idea of:A.taxation through inflation.B.good money driving out bad money.C.the derived demand for resources.D.cost-push inflation. according to the textbook, using scanner data from retail sales is an example of The distinct patterns of emotional reactions and behaviors seen at a young age make up one's: A) character. B) disposition. C) temperament. D) personality. As a result of America's insistence that its Allies' war debts be repaid in full,a. the French and British demanded enormous reparations payments from Germany.b. the German mark was ruined by drastic inflation.c. the Allies borrowed money from Switzerland to repay the loans.d. the United States began threatening renewed military intervention in Europe.e. the allies insisted on lower U.S. tariffs. which statement is true concerning files sent directly from ftk for decryption in prtk/dna? Write C if the modifier is correctly placed. Write MM if it is misplaced. Then, in the MM sentences, circle the modifier and draw an arrow to show where it should go. ___ 1. The man was stopped for speeding in the blue sweater. ___ 2. I almost saw the whole movie, but I fell asleep around midnight. ___ 3. Joe promised to move the lawn running out the door. ___ 4. The initials were those of the lovers carved on the tree.___ 5. There are only two parking spaces left in the lot. ___ 6. Every four hours the doctor told him to take a pill. ___ 7. Sitting on the porch, I smoked my last cigarette. ___ 8. The woman walked toward us wearing the feather hat.___ 9. The jet crashed into the cliff carrying 155 passengers.___ 10. I hardly ate any breakfast.___ 11. I watched the mechanic fix the car with admiration.___ 12. I earn fifty dollars a week scarcely.___ 13. Reaching into the cupboard, I found the bag of cookies.___ 14. We borrowed a mower from a neighbor that was broken.___ 15. Climbing up the telephone pole, we saw a squirrel.___ 16. Mel, running rapidly, disappeared around the bend.___ 17. The cat was rescued after the building had been set on fire by a fireman.___ 18. Weve almost found all the pieces to the puzzle.___ 19. She vowed on her birthday to go on a diet.___ 20. We need gas badly. what guard interval is used with 64-qam by 802.11n ht devices to reach 600 mbps data rates? a metal surface has a work function of 2.50 ev. what is the longest wavelength of light that will eject electrons from the surface of this metal? (1 ev which child will the nurse identify as at greatest risk for developing a urinary tract infection? A. a 6-month-old breastfed femaleB. a 2-year-old male with otitis mediaC. an 8-month-old bottle-fed female with HIVD. a 1-year-old formula-fed male on a map, each township consists of 36 sections which have an approximate surface area of: the program should output even values between -10 and 10 (inclusive), so -10 -8 ... 8 10. what should xxx be? When you fully engage NAP for remediation enforcement, what mode do you place the policy in? a. assessment. b. compliment. c. enforcement . d. isolation