The titration of a weak acid with a strong base is a common exercise in chemistry labs. We have looked at all of the individual types of calculations needed to determine the pH at any point of a titration. Consider the titration of 0.100 L of 0.300 M acetic acid with 2.00 M NaOH. What type of calculation will we be performing at the following points of the titration curve

Answer:

C. The enthalpy of the products is higher than that of the reactants

Explanation:

An endothermic process is any process with an increase in the enthalpy of the system

The enthalpy of the products is higher than that of the reactants describes an endothermic process. Therefore, option (C) is correct.

An endothermic process can be described as any thermodynamic process with an increase in the enthalpy H of the system. In such a process, a closed system commonly absorbs thermal energy from its surroundings.

An endothermic reaction leads to an increase in the temperature of the system and a decrease temperature of the surroundings. A physical process, such as the melting of ice cubes is an endothermic process.

Whether a process can take place spontaneously depends not only on the enthalpy change but also on the entropy change and absolute temperature.

An endothermic process commonly needs a favorable entropy increase  (∆S > 0) in the system. In an endothermic process, the energy of the products is higher than that of the reactants.

Learn more about the endothermic process, here:

https://brainly.com/question/13818956

#SPJ5

Answer:

A

Explanation:

because solid stick together like magnetic and can feel every vibration

Answer:D

Explanation: on the surface of a solid

Adding a catalyst would increase the rate of a reaction

Answer:

C2H4O3

Explanation:

Empirical formula is defined as the simplest whole number ratio of atoms present in a molecule.

To solve this question we need to find the moles of carbon = Moles of CO2, the moles of hydrogen (Using moles of H2O) and the moles of oxygen (Finding the mass of the mass of each atom) as follows:

Moles Carbon -Molar mass CO2: 44.01g/mol-:

33.86g CO2 * (1mol/44.01g) = 0.769 moles CO2 = Moles C * (12g/mol) =

9.23g C

Moles Hydrogen -Molar mass H2O: 18.01g/mol-

13.86g H2O * (1mol/18.01g) = 0.770 moles H2O * (2mol H / 1mol H2O) = 1.54 moles H * (1g/mol) = 1.54g H

Moles Oxygen:

Mass: 29.26g - 9.23g C - 1.54g H = 18.49g O * (1mol/16g) = 1.156 moles O

Dividing each number of moles in the moles of C (Lowe number of moles):

C = 0.769 moles C / 0.769 moles C  = 1

H = 1.54 moles H / 0.769 moles C = 2

O = 1.156 moles O / 0.769 moles C = 1.5

As the number must be a whole number each ratio twice:

C = 2

H = 4

O = 3

Empirical formula is:

Answer: If a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Explanation:

The relation between energy and wavelength is as follows.

[tex]E = \frac{hc}{\lambda}\\[/tex]

This means that energy is inversely proportional to wavelength.

As it is given that energy of a hydrogen atom and a helium atom is same.

Let us assume that [tex]E_{hydrogen} = E_{helium} = E'[/tex]. Hence, relation between their wavelengths will be calculated as follows.

[tex]E_{hydrogen} = \frac{hc}{\lambda_{hydrogen}}[/tex]    ... (1)

[tex]E_{helium} = \frac{hc}{\lambda_{helium}}[/tex]         ... (2)

Equating the equations (1) and (2) as follows.

[tex]E_{hydrogen} = E_{helium} = E'\\\frac{hc}{\lambda_{hydrogen}} = \frac{hc}{\lambda_{helium}} = E'\\\lambda_{helium} = \lambda_{hydrogen} = E'[/tex]

Thus, we can conclude that if a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Answer:

60 q

Explanation:

The conversion factor is 100; so 1 quintal = 100 kilograms. In other words, the value in q multiply by 100 to get a value in kg.

Explanation:

High carbon concentration in the deep ocean means increased absorption of carbon to the atmosphere resulting to even greater and harmful amounts of carbon in the atmosphere. Therefore we need to keep a close eye of the deep ocean in the quest to monitor and pump out excess carbon from this part of marine life.

Answer:

348 inches³

Explanation:

From our previous knowledge of  units conversion:

We know that 1000 cm³ makes 1 Liter.

Thus, for  a 5.70 L automobile engine in cubic meters will be:

= 5.70 × 1000 cm³

= 5700 cm³

Now, the displacement of the automobile in cubic inches provided that 1 inch = 2.534 cm is:

⇒ 5700× (1/ (2.54)³) in³

= 5700×0.0610 in³

= 347.7 in³

≅ 348 inches³

Answer:

This would make the reaction more energetically favourable

Explanation:

Fatty acid synthesis starts with the carboxylation of acetyl CoA to malonyl CoA. This irreversible reaction is the committed step in fatty acid synthesis. The synthesis of malonyl CoA is catalyzed by acetyl CoA carboxylase, which contains a biotin prosthetic group.

Answer: A molecule contains hydrogen bonding if it contains hydrogen covalently bonded to (fluorine, oxygen, or nitrogen)

Explanation:

A hydrogen bond is a strong dipole-dipole attraction which occurs between

--> the hydrogen atom attached to a strongly electronegative atom, and

--> another strongly electronegative atom with a lone pair of electrons.

When an electronegative atom such as fluorine, oxygen or Nitrogen is bonded to hydrogen, a dipole develops causing the hydrogen to be partially negative. The electrostatic attraction between the partially positive hydrogen atom in one molecule and the partially negative atom of the more electronegative element in another molecule gives rise to the strong dipole-dipole attraction called hydrogen bonding.

Hydrogen fluoride, water and ammonia contain the three most electronegative elements, fluorine, oxygen and nitrogen respectively, linked directly to hydrogen. In addition, lone pairs of electrons are present in the fluorine, oxygen and nitrogen atoms of the three hydrides, making hydrogen bonds to form easily between them. These compounds which exhibits hydrogen bonding always have higher melting and boiling points.

Answer:

This is an oxidation-reduction (redox) reaction:

2 Ni0 - 4 e- → 2 NiII

(oxidation)

2 O0 + 4 e- → 2 O-II

(reduction)

Ni is a reducing agent, O2 is an oxidizing agent.

Answer:

whether or not they have a common origin

Explanation:

During the scientific investigation of a crime, a forensic scientist might be required to perform a comparison analysis. A comparison analysis is an examination where specific physical properties are obtained from a suspect specimen and a standard which are then compared to identify their common origin. This type of analysis is important for it helps in narrowing down the crime to a particular person. It also enables accurate delivery of justice.

Answer:

Slower

Explanation:

The reaction between alkyl halides and sodium iodide-in-acetone is an SN2 reaction. The rate of reaction depends on the concentration of the alkyl halide as well as the concentration of the sodium iodide. It is a bimolecular reaction.

This means that if the concentration of any of the reactants is halved, the rate of reaction decreases accordingly.

Therefore, if the iodide solution is half as concentrated, the reaction is observed to be slower in accordance with the rate law;

Rate = k[alkyl halide] [iodide]

Answer:

A metal M readily forms water-soluble sulphate MSO4, water-insoluble hydroxide M(OH)2 and oxide MO. The oxide and hydroxide are soluble in NaOH. The M is:

Answer:

The answer is 20

Explanation:

Answer:

1 ) Δs ( entropy change for hot block ) = - Q / th  ( -ve shows heat lost to cold block )

Δs ( entropy change for cold block ) = Q / tc

∴ Total Δs = ΔSc + ΔSh

                 = Q/tc - Q/th

2) ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k

Explanation:

1) To show that heat flows spontaneously from high temperature to low temperature

example :

Pick two(2) solid metal blocks with varying temperatures ( i.e. one solid block is hot and the other solid block is cold )

Place both blocks for time (t ) in an insulated system to reduce heat loss or gain to or from the environment

Check the temperature of both blocks after time ( t ) it will be observed that both blocks will have same temperature after time t ( first law of thermodynamics )

Δs ( entropy change for hot block ) = - Q / th  ( -ve shows heat lost to cold block )

Δs ( entropy change for cold block ) = Q / tc

∴ Total Δs = ΔSc + ΔSh

                 = Q/tc - Q/th

2) Entropy change for Decomposition of mercuric oxide

2HgO (s) → 2Hg(l) + O₂ (g)

Δs = positive

there is transition from solid to liquid and the melting point of mercury ( the point at which reaction will take place ) = 500⁰C

hence ΔSdecomposition = S⁻ Hg  -  S⁻ HgO =

Δh of reaction = 181.6 KJ

Temp = 500 + 273 = 773 k

hence ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k

Answer:

All energy is made by the sun because without the sun there would be no humans to produce other energy

Explanation:

We use many different forms of energy here on earth, but here’s the thing: almost all of them originate with the sun, not just light and heat (thermal) energy! The law of conservation of energy says that energy can’t be created or destroyed, but can change its form. And that’s what happens with energy from the sun—it changes into lots of different forms:

Plants convert light energy from the sun into chemical energy (food) by the process of photosynthesis. Animals eat plants and use that same chemical energy for all their activities.

Heat energy from the sun causes changing weather patterns that produce wind. Wind turbines then convert wind power into electrical energy.

Hydroelectricity is electrical energy produced from moving water, and water flows because heat energy from the sun causes evaporation that keeps water moving through the water cycle.

Right now, much human activity uses energy from fossil fuels such as coal, oil, and natural gas. These energy sources are created over very long periods of time from decayed and fossilized living matter (animals and plants), and the energy in that living matter originally came from the sun through photosynthesis.

solar panel shows what is the ultimate source of energy

Answer:

acidic titration in its stable form

Explanation:

Methyl orange can change its color in titration solution. The yellow color is towards alkaline solution and red color is towards acidic solution. The Ph value of solution will change during this chemical process.

Answer:

Atmosphere to mmHg Conversion Example. Task: Convert 8 atmospheres to mmHg (show work) Formula: atm x 760 = mmHg Calculations: 8 atm x 760 = 6,080 mmHg Result: 8 atm is equal to 6,080 mmHg.

Explanation:

Answer:

5.38 L

Option D.

Explanation:

2 NaOH(s) + 2 Al(s) + 6 H₂O(l)   →  2 NaAl(OH)₄(s)  + 3 H₂(g)

We convert mass of Al to moles:

4.32 g . 1 mol /26.98g = 0.160 moles

As NaOH is in excess, aluminum is the limiting reactant.

We see stoichiometry, were ratio is 2:3.

2 moles of Al can produce 3 moles of hydrogen

Our 0.160 moles may  produce (0.160 . 3)/2 = 0.240 moles of H₂.

We know that 1 mol of any gas at STP conditions is contained in 22.4L

So let's make the conversion factor:

0.240 mol . 22.4L / 1mol = 5.38 L

The forces in gases are weaker than forces in solids and liquids.

Because they have more kinetic energy that overcomes the force of attraction.

Answer:

Identify a process that is NOT reversible.

Melting of snow

baking of bread

deposition of carbon dioxide

freezing water

melting of aluminum

Explanation:

A physical change is the one in which there is a change only in its physical state, color, the appearance of the substance. But the chemical composition of the substance remains unchanged.

It is a temporary change and can be reversed easily.

For example:

melting, freezing, deposition etc.

Baking is a permanent change and the chemical composition of the substance changes.

Hence, among the given options, baking of bread is not a reversible change.

Out of the following all are physical changes except baking of bread and physical changes are reversible so the process  which is not reversible is baking of bread.

Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.

Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.

They involve only rearrangement of atoms and are often characterized to be changes which are reversible.

Learn more about physical changes,here:

https://brainly.com/question/17931044

#SPJ5

Answer: Hello the options related to your question are attached below

The slope is related to the rate constant so all four trials should have the same slope since the reactions are all the same ( Option C )

Explanation:

It is important when choosing the order of the reaction because the concentration of the bleaches used in the four trials are in excess hence their slopes have to be roughly the same and also because the reactions are similar and they where done at the same temperature, hence the slope of the first and second-order graphs will be the same.

Answer:

Hence among the options a and c, option d is that the correct answer because it has rock bottom energy ( as n value increases, energy decreases as energy levels come closer).

Explanation:

The relation between energy and wavelength is:

[tex]\Lambda = hC/E[/tex]  

From this equation, it's clear that wavelength and energy are inversely proportional to every other. The Lower the energy of a specific transition, the longest will the wavelength be of that specific transition.  

Among the given options, options b and d are often ruled out, since those transitions produce to release of a photon because it is coming down from an excited state.

Answer: hello the experiment related to your question is missing but I will provide a more general answer within the scope of your  question

answer :

presence of Impurities

Explanation:

The melting point of the crystals as obtained in the experiment will be close to but below reference melting points and will also melt slower because of the presence of impurities in the compound

Impurities alter the melting and freezing points from ideal freezing and melting points of compounds

Answer:

A. the Law of Multiple Properties

Answer:

A. the law of multiple proportions

Answer:

0.605 g

Explanation:

First we calculate how many Cl₂ moles need to be produced, using the PV=nRT formula:

Inputting the data:

Then we convert 0.00696 moles of Cl₂ to MnO₂ moles:

Finally we convert 0.00696 moles of MnO₂ to grams, using its molar mass:

Answer:

1) pure water

2) 0.75 m CaCl2

3) 1.0 m NaCl

4) 0.5 m KBr

5) 1.5 m glucose (C6H12O6)

Explanation:

Boiling point elevation is a colligative property. Coligative properties are properties that depend on the amount of solute present in the system. The boiling point of solvents increase due to the presence of solutes.

The boiling point elevation depends on the number of particles the solute forms in solution and the molality of the solute. The more the number of particles formed by the solute and the greater the molality of the solute, the greater the magnitude of boiling point elevation.

The order of decreasing hoping point elevation is;

1) 0.75 m CaCl2

2) 1.0 m NaCl

3) 0.5 m KBr

4) 1.5 m glucose (C6H12O6)