The value of mass remains constant but weight changes place to place why​

As the spring is stretched, it exerts an upward restoring force f. At maximum extension, Newton's second law gives

∑ F = f - mg = 0   ==>   f = (2.0 kg) (9.8 m/s²) = 19.6 N

By Hooke's law, if k is the spring constant, then

f = kx   ==>   k = f/x = (19.6 N) / (0.15 m) ≈ 130 N/m

A 4.0 kg mass would cause the spring to exert a force of

f = (4.0 kg) (9.8 m/s²) = 39.2 N

which would result in the spring stretching a distance x such that

39.2 N = (130 N/m) x   ==>   x = (39.2 N) / (130 N/m) ≈ 0.30 m ≈ 30 cm

Answer:

4.7 GHz

Explanation:

Applying,

v = λf................. Equation 1

Where v = velocity of the radio wave, λ = wavelength, f = frequency

make f the subject of the equation

f = v/λ.............. Equation 2

Note: A radio wave is an electromagnetic wave, as such it moves with a velocity of 3.00 x 10⁸ m/s

From the question,

Given: λ = 0.0644 meters

Constant: v = 3.00 x 10⁸ m/s

Substitute these values into equation 2

f = (3.00 x 10⁸)/0.0644

f = 4.66×10⁹ Hz

f = 4.7 GHz

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

The spring constant of a spring is defined as the measurement of ratio of the force that is exerted on the spring to the displacement caused by it.

Here,

The mass of the block = m

Let F be the applied force on the spring and k be the spring constant.

When the mass attached to the spring is pulled to one side then released, it executes SHM.

Therefore we can write that, the applied force,

F = kx

Restoring force = -kx

According to Newton's law, we know that,

F = ma

So,

ma = -kx

Therefore, the acceleration,

a = (-k/m) x

For an SHM, the acceleration is given as,

a = -ω²x

Therefore, we can write that,

-ω²x = (-k/m) x

ω² = k/m

So, the time period of the spring,

T = 2[tex]\pi[/tex]/ω

T = 2[tex]\pi[/tex][√(m/k)]

Hence,

The time period of the spring is 2[tex]\pi[/tex][√(m/k)].

To learn more about spring constant, click:

https://brainly.com/question/20785296

#SPJ2

Answer:

XL sleep usual Addison officer at home and ear is not a short time to be be free and ear is a short time to make a short time

Explanation:

so that I can take the class on Monday and ear is not a short time to be be free and ear is not a short time to be be free and ear is not a short time to be be free and ear is not a short time to time for a day or night and ear buds is Anshu and duster and duster fgor a day or night is Anshu and duster for a day or not a week of computer science from your computer and I am in the same as I am a short of ti and you can be the first time I will be be

Answer:

Explanation:

From the given information:

From the rotational axis, the distance of the force of gravity is:

d_g = 25+5.0 cm

d_g = 30.0 cm

d_g = 30.0 × 10⁻² m

However, the relative distance of FB  cos 75.9° from the axis is computed as:

d_B = 5.0 cm

d_B = 5.0 × 10⁻² m

The net torque rotational equilibrium = zero (0)

i.e.

[tex]\tau_g -\tau_B = 0 \\ \\ F_gd_g -F_gcos 75.9^0 d_B = 0 \\ \\ F_B = \dfrac{F_g d_g}{F_g cos 65.6} \\ \\ F_B = \dfrac{(3.2)(9.8)(30*10^{-2})}{(5.0*10^{-2} * cos 75.9)} \\ \\ \mathbf{F_B = 772.4 N}[/tex]

= 772.4 N

Thus, the force exerted = 1772.4 N

Answer:

running away and launching the anchor that will give a greater speed towards the dock v₄.

Explanation:

To try to bring the boat closer to the dock, several cases can be carried out.

* move inside the ship so that the center of mass changes and since moving away you have a speed v, the ship will approach the dock at a speed v₂,

* Throw the anchor in the opposite direction to the dock so that using the conservation of the moment the boat moves towards it, it moves at a speed v₃

* A combination of the two processes running away and launching the anchor that will give a greater speed towards the dock v₄.

In all cases, the friction must be zero.

All other movements move the ship away from the dock

Energy = (power) x (time)

Energy = (0.69 W) x (0.36 sec)

Energy = 0.25 Joule

Answer:

g₂ = 11 m/s²

Explanation:

The value of free-fall acceleration on the surface of a planet is given by the following formula:

[tex]g = \frac{Gm}{r^2}[/tex]

where,

g = free-fall acceleration

G = Universal Gravitational Constant

m = mass of the planet

r = radius of planet

FOR PLANET 1:

[tex]g_1 = \frac{Gm_1}{r_1^2}\\\\\frac{Gm_1}{r_1^2} = 22 m/s^2[/tex] --------------------- equation (1)

FOR PLANET 2:

[tex]g_2 = \frac{Gm_2}{r_2^2}\\\\g_2 = \frac{G(2m_1)}{(2r_1)^2}\\\\g_2 = \frac{1}{2}\frac{Gm_1}{r_1^2}\\\\[/tex]

using equation (1):

[tex]g_2 = \frac{g_1}{2}\\\\g_2 = \frac{22\ m/s^2}{2}[/tex]

g₂ = 11 m/s²

Answer:

X = 0.6

Explanation:

The resistance of the unknown resistor can be found by using the formula of the Wheatstone bridge:

[tex]\frac{M}{N}=\frac{P}{X}\\\\\frac{850}{15} = \frac{33.48}{X}\\\\X = \frac{(33.48)(15)}{850}[/tex]

X = 0.6

Hence, the unknown value of resistance is found to be 0.6 units.

Answer: 11.36 m

Explanation:

Given

Mass of roller coaster is m=1200 kg

Initial speed of roller coaster is v=15 m/s

Energy at bottom and at the top is same i.e.

[tex]\Rightarrow \dfrac{1}{2}mv^2=mgh\\\\\Rightarrow \dfrac{1}{2}\times 1200\times 15^2=1200\times 9.8\times h\\\\\Rightarrow h=\dfrac{15^2}{2\times 9.8}\\\\\Rightarrow h=11.36\ m[/tex]

Thus, the highest point reach by the roller coaster is 11.36 m

Answer:

11.36m

Explanation:

Answer:

20 seconds

Explanation:

We are given 2 givens in the first statement

v0=0 and a=5

And we are trying to find time needed to cover 1km or 1000m.

So we use

x-x0=v0t+1/2at²

Plug in givens

1000=0+2.5t²

solve for t

t²=400

t=20s

Answer:

Acosθ

Explanation:

The x-component of a vector is defined as :

Magnitude * cosine of the angle

Maginitude * cosθ

The magnitude is represented as A

Hence, horizontal, x - component of the vector is :

Acosθ

Furthermore,

The y-component is taken as the sin of the of the angle multiplied by the magnitude

Vertical, y component : Asinθ

Answer:

3v at 5.3 herts

Explanation:

Answer:

3.464 seconds.

Explanation:

We know that we can write the period (the time for a complete swing) of a pendulum as:

[tex]T = 2*\pi*\sqrt{\frac{L}{g} }[/tex]

Where:

[tex]\pi = 3.14[/tex]

L is the length of the pendulum

g is the gravitational acceleration:

g = 9.8m/s^2

We know that the original period is of 2.00 s, then:

T = 2.00s

We can solve that for L, the original length:

[tex]2.00s = 2*3.14*\sqrt{\frac{L}{9.8m/s^2} }\\\\\frac{2s}{2*3.14} = \sqrt{\frac{L}{9.8m/s^2}}\\\\(\frac{2s}{2*3.14})^2*9.8m/s^2 = L = 0.994m[/tex]

So if we triple the length of the pendulum, we will have:

L' = 3*0.994m = 2.982m

The new period will be:

[tex]T = 2*3.14*\sqrt{\frac{2.982m}{9.8 m/s^2} } = 3.464s[/tex]

The new period will be 3.464 seconds.

Answer:

Radio waves are used to carry satellite signals. These waves travel at 300,000 km/s (the speed of light). This means that a signal sent to a satellite 38,000 km away takes 0.13 s to reach the satellite and another 0.13 s for the return signal to be received back on Earth.

Explanation:

hope it help

Answer:

0.000064 cubic meters.

Explanation:

Given the following data;

Length of side = 4 centimeters

Conversion:

100 centimeters = 1 meters

4 cm = 4/100 = 0.04 meters

To find the volume of cuboid;

Mathematically, the volume of a cuboid is given by the formula;

Volume of cuboid = length * width * height

However, when all the sides are equal the formula is;

Volume of cuboid = L³

Volume of cuboid = 0.04³

Volume of cuboid = 0.000064 cubic meters.

Answer:

a) if we assume that the water does not spill, Beaker B weighs more than beaker S, or which in this case Beaker A weighs more

b) If it is spilled in water the weight of the two beakers is the same

Explanation:

The beaker weight is

 beaker A

          W_total = W_ empty + W_water

Beaker B

            W_total = W_ empty + W_water + W_roca

a) if we assume that the water does not spill, Beaker B weighs more than beaker S, or which in this case Beaker A weighs more

b) If it is spilled in water, the weight of the two beakers is the same because the amount of liquid spilled and equal to the weight of the stone, therefore the two beakers weigh the same

Answer:

P = 29.3 W

Explanation:

The magnetic field in a solenoid is

          B = μ₀  n i

          i = B /μ₀ n

where n is the density of turns

We can use a direct rule of proportions or rule of three to find the number of turns, 1 a turn has a diameter of 0.100 cm = 10⁻³ m, in the length of

L= 85.1 cm = 0.851 m how many turns there are

         #_threads = 0.851 / 10⁻³

         #_threads = 8.50 10³ turns

the density of turns is

          n = # _threads / L

          n = 8.51 103 / 0.851

          n = 104 turn / m

the current that must pass through the solenoid is

          i = 8.90 10-3 / 4pi 10-7 104

          i = 0.70823 A

now let's find the resistance of the copper wire

         R = ρ L / A

the resistivity of copper is ρ = 1.72 10⁻⁸ Ω m

wire area

         A = π r²

         A = π (5 10⁻⁴)

         A = 7,854 10⁻⁷ m²

let's find the length of wire to build the coil, the length of a turn is

         Lo = 2π r = ππ d

         Lo = π 0.100

         Lo = 0.314159 m / turn

With a direct proportion rule we find the length of the wire to construct the 8.5 103 turns

          L = Lo #_threads

          L = 0.314159 8.50 10³

          L = 2.67 10³ m

resistance is

         R = 1.72 10⁻⁸ 2.67 10₃ / 7.854 10⁻⁷

         R = 5,847 10¹

         R = 58.47 ohm

The power to be supplied to the coil is

          P = VI = R i²

          P = 58.47 0.70823²

          P = 29.3 W

Answer:

A) q = 1.67 × 10^(-7) C

B) q = 1.67 × 10^(-10) C

Explanation:

We are given;

Potential; V = 30 KV = 30000 V

Radius of sphere; r = diameter/2 = 0.1/2 = 0.05 m

A) To find the charge of the sphere, we will use the formula;

V = kq/r

Where;

q is the charge

k is electric force constant = 9 × 10^(9) N.m²/C²

Thus;

q = Vr/k

q = (30000 × 0.05)/(9 × 10^(9))

q = 1.67 × 10^(-7) C

B) Now, potential energy here is a formula; U = qV

However, for the drop of paint to move, the potential energy will be equal to the kinetic energy. Thus;

qV = ½mv²

q = mv²/2V

Where;

v is speed = 10 m/s

V = 30000 V

m = mass = 0.100 mg = 0.1 × 10^(-6) Thus;

q = (0.1 × 10^(-6) × 10²)/(2 × 30000)

q = 1.67 × 10^(-10) C

Answer:

Radiation

Explanation:

Conduction, convection and radiation are the three modes of heat transfer.

1. Conduction: When the one end is heated of any rod, the heat transfer to the other end by the vibrational motion of the molecules, it is called conduction.

The heat transfer in a solid is due to the conduction.

2. Convection: When the liquid or gas is heated, the molecules which is in contact to the heat, heated first and due to the decrease in density they moves up and the molecules on the upper side are higher in density so they moves down. These are called convection currents. The process continues till the entire liquid becomes heated. It generally takes place in liquids and gases.  

3. Radiation: The process of heat transfer in which no molecules takes place is called radiation. The heat coming from sun is due to the radiation. It does not require any medium.  

In the thermos bottle, as there is no air between the two layers, so the heat transfer is due to the radiation.  

Answer:

The voltage across 150 ohm resistor is 6 volts.

Explanation:

Given that,

Resistors having resistances 150 ohms and 300 ohms are in series. Their equivalent is :

R = 150 + 300

R = 450 ohms

Let I is the current in the circuit. Using Ohm's law,

V = IR

[tex]I=\dfrac{V}{R}\\\\I=\dfrac{18}{450}\\\\I=0.04\ A[/tex]

The current in series remains the same while potential divides. So,

[tex]V_1=IR_1\\\\V_1=0.04\times 150\\\\=6\ V[/tex]

So, the voltage across 150 ohm resistor is 6 volts.

Answer:

Graph B express the magnetic relationship of magnetic flux and electronic flow

Answer:

False

Explanation:

You have a circle so think back to circular motion. Theres 2 directions, centripetal and tangential. The problem tells you there's a constant tangential speed so tangential acceleration is 0. However there is a centripetal acceleration acting on the ball that holds it in its circular motion (i.e. tension, or gravity). Since centripetal is perpendicular to the tangential direction, acceleration and velocity are in different directions.

Answer:

Nonrenewable energy

Explanation:

Renewable energy is also known as clean energy and it can be defined as a type of energy that are generated through natural sources or technology-based processes that are replenished constantly. Some examples of these natural sources are water (hydropower), wind (wind energy), sun (solar power), geothermal, biomass, waves etc.

Basically, a renewable energy source is sustainable and as such can not be exhausted.

On the other hand, a non-renewable energy refers to an energy source such as fossil fuels that takes a very long time to be created or their creation happened long ago and isn't likely to happen again e.g uranium.

For example, fossil fuels such as coal, oil, and natural gas, come from deep inside the Earth where they formed over millions of years ago.

In this scenario, the kind of energy the newspaper sources are talking about is a nonrenewable energy source because they are capable of being exhausted in the not-so-distant future.

Answer:

Look at work

Explanation:

Series:

I is the same for all resistors so just find the value of Req. In series Req= R1+R2+...+Rn. So here it will be 4.5+2.3=6.8ohms. Ieq=Veq/Req=4.41A. And since current is the same across all resistors the current to the lightbulb is 4.41A.

Parallel:

V is the same for all resistors so start of by finding Req. In parallel, Ieq=I1+I2+...+In. So I1= 30/4.5= 6.67A and I2= 13.04A. Ieq= 6.67+13.04= 19.71A.

Answer:

Reaction force

Explanation:

Newton´s 3rd law says that every force exerted in nature has an equal and opposite force.

For example here, when Al exerts force on Ben, Ben exerts the same amount of force (30N) on Al.

Al exerts the action force and Ben exerts the reaction force.

Answer:

because minerals can be gotten from the bottom

Explanation:

it's self explanatory

Answer:

a) He found the same value of q/m for different cathode materials.

b)      y = [tex]- \frac{e}{m}\ \frac{E_o v_o^2 }{2d^2}[/tex] ,  c)  v = [tex]\frac{E_o}{B_o}[/tex]

Explanation:

In Thomson's experiments he was able to measure the deflection of the light beam under the effect of the magnetic field and with these results find the e / m relationship, which in all cases is the same, therefore the most important conclusion is that the value e E / m is constant for all materials.

b) In the part of the plates the electrons are accelerated by the electric field,

              F = ma

             - e E = m a

              a = - (e/m)  E₀

the distance traveled is          

X axis

          x = v₀ t

the separation of the plates is x = d

          t = vo / d

Y axis

          y = v_{oy} t + ½ to t²

          y = ½ a t²

          y = [tex]- \frac{e}{m}\ \frac{E_o v_o^2 }{2d^2}[/tex]

c) In this case there is a magnetic field B₀ and the electrons have no deflection

         F = - e E + e v x B

if there is no deviation F = 0

         e E = e v B

         v = [tex]\frac{E_o}{B_o}[/tex]

Answer:

6m/s

Explanation:

We are to calculate the speed of Monique

Speed = Distance/Time

Given

Distance = 360m

Time = 60secs

Substitute

Speed = 360m/60s

Soeed = 6m/s

Hence she was running at 6m/s