The voltage produced by the colorimeter is __________ to the absorbance of the sample and ____________ to the light intensity.
A) Directly proportional, indirectly proportional
B) Directly proportional, directly proportional
C) Indirectly proportional, indirectly proportional
D) Indirectly proportional, directly proportional
E) None of the above

The empirical formula for malic acid is HO₂CCH=CHCOH₂,if it contains 35.821% C, 4.478% H, and 59.701% O by mass.

In science, the empirical formula of a synthetic compound is the easiest entire number proportion of particles present in a compound.[1] A straightforward illustration of this idea is that the empirical formula  of sulfur monoxide, or somewhere in the vicinity, would essentially be Thus, just like the observational recipe of disulfur dioxide, S₂O₂. Accordingly, sulfur monoxide and disulfur dioxide, the two mixtures of sulfur and oxygen, have a similar experimental recipe. Nonetheless, their sub-atomic equations, which express the quantity of particles in every atom of a synthetic compound, are not something similar.

Malic acid or cis-butenedioic acid is a natural compound that is a dicarboxylic corrosive, a particle with two carboxyl gatherings. Its compound equation is HO₂CCH=CHCOH₂. Maleic acid is the cis-isomer of butenedioic corrosive, though fumaric acid is the trans-isomer. It is for the most part utilized as a forerunner to fumaric corrosive, and comparative with its parent maleic anhydride, maleic corrosive has not many applications.

To know more about empirical formula,visit here:

https://brainly.com/question/11588623

#SPJ4

Answer:

Because they have the same arrangement of atoms in space. Both have a straight line or a flat triangular arrangement of atoms, respectively, with bond angles of 180° and 120° respectively. In 2-dimensional drawings, it is not possible to see the differences in the three-dimensional arrangement of atoms, so both linear and trigonal planar molecules appear as a straight line or a flat triangle. However, in three dimensions, it is possible to see the differences in the arrangement of the bonds and the orientation of the molecule in space, allowing us to distinguish between linear and trigonal planar molecules.

Explanation:

Tell me if you still confuse

ALLEN

An ionic compound will dissolve when the attraction between the polar molecules and the ions is greater than the attraction between the ions themselves.

Polar motes A polar patch is generally formed when the one end of the patch is said to retain more positive charges and whereas the contrary end of the patch has negative charges, creating an electrical pole. When a patch is said to have a polar bond, also the centre of the negative charge will be on one side, whereas the centre of positive charge will be in the different side. The entire patch will be a polar patch.

Ion, any snippet or group of tittles that bears one or further positive or negative electrical charges. appreciatively charged ions are called cations; negatively charged ions, anions. Ions are formed by the addition of electrons to, or the junking of electrons from, neutral tittles or motes or other ions.

Learn more about Ionic compound:

https://brainly.com/question/29348041

#SPJ4

The IP65 Waterproof pH tester  is the Ph tester that is described here.

A pH tester is a tool or device that is used to measure the acidity or alkalinity of a liquid or solution. It works by measuring the concentration of hydrogen ions (H+) in the solution and determining its pH value.

pH testers can be simple and handheld, or more sophisticated and digital, and they are commonly used in a variety of applications such as in agriculture, environmental monitoring, swimming pool maintenance, and scientific research. pH testers are available in various types and models, including pH test strips, pH meters, and pH indicators.

Read more on A pH tester here:https://brainly.com/question/29442555

#SPJ1

The large display shows readings in an extended range from -2.0 to 16.0 pH and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F. what tester is this?

The work done during the compression of the gas is 615 J.To calculate the work done during the compression of the gas, we can use the formula:

work = -Pext x ΔV

where Pext is the external pressure applied to the gas, and ΔV is the change in volume of the gas.

We first need to convert the volume units from liters to cubic meters, and the pressure units from torr to atmospheres (atm):

8.4 L = 0.0084 m^3

2.17 L = 0.00217 m^3

736 torr = 0.971 atm

Now we can calculate the work done:

work = -Pext x ΔV

work = -0.971 atm x (0.00217 m^3 - 0.0084 m^3)

work = -0.971 atm x (-0.00623 m^3)

work = 0.00604 atm·m^3

Finally, we need to convert the units of work from atm·m^3 to joules (J). 1 atm L is equivalent to 101.325 J, so:

work = 0.00604 atm·m^3 x (101.325 J/atm·L) x (1000 L/m^3)

work = 615 J

Therefore, the work done during the compression of the gas is 615 J.

Find out more about work done

brainly.com/question/30703625

#SPJ4

Answer:

To find the number of fluorine atoms in a 150-mg tablet of the antibacterial drug, you need to know the molecular weight of the drug and the number of moles in 150 mg.

Since the molecular formula is given as C, H, F, N, O, you can determine the molecular weight by adding the atomic weights of each element.

For example, if the atomic weights of C, H, F, N, and O are 12, 1, 19, 14, and 16, respectively, the molecular weight of the drug is (12 x C) + (1 x H) + (19 x F) + (14 x N) + (16 x O).

Knowing the molecular weight and the number of moles, you can use Avogadro's number to find the number of fluorine atoms. Avogadro's number is 6.022 x 10^23.

Since the information about the molecular weight, number of moles, and molecular formula is not given, it's not possible to determine the number of fluorine atoms in a 150-mg tablet of this drug.

Explanation:

According to Avogadro's number, there are 0.0145×10²³ atoms present in a 150-mg tablet of this drug.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number, substitution of values in formula gives number of atoms= 0.15/62×6.022×10²³= 0.0145×10²³.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ2

140 mL of 0.50 m solution of hcl would just neutralize 290 ml of a solution containing 4.7 g of ba(oh)2.

To solve this problem, we can use the balanced chemical equation for the reaction between hydrochloric acid (HCl) and barium hydroxide (Ba(OH)2):

2HCl + Ba(OH)2 → BaCl2 + 2H2O

From the equation, we can see that two moles of HCl are required to react with one mole of Ba(OH)2.

First, we need to calculate the number of moles of Ba(OH)2 in the given volume of solution:

molar mass of Ba(OH)2 = 137.33 g/mol

number of moles of Ba(OH)2 = mass / molar mass = 4.7 g / 137.33 g/mol = 0.0342 mol

Next, we can use the stoichiometry of the balanced equation to determine the number of moles of HCl required:

2 moles of HCl react with 1 mole of Ba(OH)2

number of moles of HCl = 2 x 0.0342 mol = 0.0684 mol

Finally, we can use the definition of molarity to calculate the volume of the 0.50 M HCl solution required to provide 0.0684 moles of HCl:

molarity = moles of solute / volume of solution

volume of solution = moles of solute / molarity = 0.0684 mol / 0.50 mol/L = 0.137 L

Since the volume of the HCl solution is expressed in liters, we need to convert to milliliters:

0.137 L x 1000 mL/L = 137 mL

Therefore, 137 mL of the 0.50 M HCl solution would be required to neutralize 290 mL of the Ba(OH)2 solution. Rounded to two significant figures, the answer is 140 mL.

Learn more about neutralize here:

https://brainly.com/question/15347368

#SPJ4

To calculate the moles of EDTA (ethylenediaminetetraacetic acid) in a titration, you need to know the volume and concentration of the EDTA solution used in the titration, as well as the reaction stoichiometry.

The reaction between EDTA and a metal ion typically forms a complex, in which one mole of EDTA reacts with one mole of the metal ion. Therefore, the number of moles of EDTA can be calculated using the following formula:

moles of EDTA = (volume of EDTA solution in liters) * (concentration of EDTA solution in Molarity)

For example, if you used 25.0 mL of 0.02 M EDTA solution in a titration, the number of moles of EDTA would be:

moles of EDTA = (25.0 mL * 0.001 L/mL) * (0.02 mol/L) = 0.0005 mol.

Once you have calculated the number of moles of EDTA, you can use the stoichiometry of the reaction to determine the number of moles of metal ion in the sample being titrated.

To learn more about EDTA here:

https://brainly.com/question/26556460

#SPJ4

The mass of the fourth isotope is approximately 100.9866 amu.

Let x be the mass of the fourth isotope.

Since the average atomic mass is determined to be 69.3680

amu, we can set up an equation using the given information to solve for x, the mass of the fourth isotope:

(0.2436)(69.321 amu) + (0.3356)(69.3863 amu) + (0.1022)(69.8741 amu) + (x)(0.2186) = 69.3680 amu

Simplifying and solving for x, we get:

16.8670336 amu + 23.27195028 amu + 7.13326402 amu + 0.2186x = 69.3680 amu

47.2722479 amu + 0.2186x = 69.3680 amu

0.2186x = 22.0957521 amu

x = 100.9866 amu

Learn more about average atomic mass and isotopes at: https://brainly.com/question/28308742

#SPJ1

The voltage produced by the colorimeter is __________ to the absorbance of the sample and ____________ to the light intensity.

E) None of the above

Relation between transmittance and absorbance is as follows.

Therefore we know that the amount of light that passes through a solution is known as transmittance.

It can be expressed as follows;

T= [tex]\frac{I_{t} }{I_{0} }[/tex]

Now we know that, I, is the intensity of transmitted light.

I is the initial intensity of light beam.

Then the colorimeter produces an output voltage which is linearly varies with transmittance that is light intensity.

Relation between absorbance and transmittance is as follows:

A = log ([tex]\frac{1}{T}[/tex])

The reciprocal of transmittance of the sample varies logarithmically varies with absorption.

Therefore, we can say that the voltage produced by the colorimeter is varies logarithmically reciprocal to the absorbance of the sample and linear to the light intensity.

To learn more about light intensity, click here:

brainly.com/question/9195922

#SPJ4

Metallic bonding produces a material that, when solid, may conduct electricity.

The passage of electrons determines the conductance of electricity. Atoms and molecules in the crystal lattice are arranged in a certain way in the solid state with the help of metallic bonding. Therefore, the electrons shouldn't be permitted to travel at all. The solids must be in a constant condition since they cannot carry electricity. However, certain solid substances do carry electricity.

Conductors are solid substances that have the ability to conduct electricity. This group includes the metals. The delocalized electrons are what give this material such a high conductivity. The flux of electrons affects conductance. Metals have relatively loosely bonded valence electrons that are simple to remove from their orbitals. They boost the conductivity by producing an ocean of electrons.

Learn more about Metallic here:

https://brainly.com/question/29762857

#SPJ4

Answer:

The difference between a hot cup of water and a cold one in terms of thermal energy can be described as the amount of heat energy that is present in each cup. The hot cup of water contains more thermal energy than the cold one due to its higher temperature. This means that the hot cup has more energy to transfer to its surroundings, and will cool down faster than the cold cup. The thermal energy in a cup of water is related to the temperature, with hotter water having a higher thermal energy than colder water.

Explanation:

The concept Boyle's law is used here to determine the volume of the gas at STP. The volume of dry gas at STP is 576.17 mL.

The Boyle's law states that at constant temperature, the volume of a given mass of gas is inversely proportional to its pressure. Mathematically the law can be expressed as:

PV = k (Constant)

For two different gases, the equation is:

P₁V₁ = P₂V₂

Then the new volume is:

V₂ = P₁V₁ /  P₂

= 115.4 × 350.0 / 70.1

= 576.17 mL

Thus the volume of the dry gas is 576.17 mL.

To know more about Boyle's law visit;

https://brainly.com/question/30367133

#SPJ1

a) None of these. The volume of nitrogen dioxide in 52.8g of nitrogen dioxide would depend on the pressure and temperature of the gas. Therefore, none of these is correct.

Nitrogen dioxide (NO2) is formed through the reaction of nitrogen oxide (NO) with oxygen in the air. This reaction occurs primarily due to high-temperature combustion processes, such as those in automobile engines, power plants, and industrial boilers.

Nitrogen dioxide is used in the production of nitric acid, rocket propulsion, and as a food preservative. It can monitor air quality in urban areas, treat pulmonary hypertension, and inhale anaesthesia during surgery.

To learn more about nitrogen, visit here:

https://brainly.com/question/16711904

#SPJ1

Drs. Avery, MacLeod, and McCarty used the enzyme protease to remove the proteins from the cell extracts." Therefore, the correct answer is the first option.

Proteases are enzymes that break down proteins into smaller peptides or amino acids. This is important for the digestion of food and the regulation of many cellular processes. Drs. Avery, MacLeod, and McCarty used protease to remove the proteins from the cell extracts in order to isolate and study the DNA in their experiments. This was a crucial step in their research, which helped to establish that DNA is the genetic material of the cell.

Learn more about protease enzyme at https://brainly.com/question/28823660

#SPJ11

The purpose of using the refractometer in today's experiment is to determine the refractive index of D-limonene and characterize the sample.

A refractometer is a laboratory instrument that measures the refractive index of a substance, which is a measure of how much the substance bends light. Refractometers are commonly used in various fields such as chemistry, physics, biology, and agriculture, to determine the composition, concentration, and purity of a sample.

In this experiment, the refractometer is being used to determine the refractive index of D-limonene, which is a clear liquid hydrocarbon that is commonly used as a solvent and flavoring agent. The refractive index of D-limonene can provide information about the purity and composition of the sample, and it can also be used to identify the substance.
The refractive index is determined by measuring the angle of refraction of a beam of light passing through the sample. The angle of refraction is then used to calculate the refractive index of the substance. The refractive index of a substance is dependent on its chemical composition and can be used to distinguish between different compounds.

the refractometer is an important instrument for characterizing the properties of a sample, and in this experiment, it is being used to determine the refractive index of D-limonene and provide information about the purity and composition of the sample.

Learn more about refractometers here:

https://brainly.com/question/20726605

#SPJ4

An antibiotic is penicillin G, sometimes referred to as benzylpenicillin. Its molecular structure is C16H18N4S. the molecular mass of penicillin G is 334.386 g/mol.

To calculate the molecular mass of penicillin G, we need to add the atomic masses of all the atoms in its chemical formula.

The atomic masses of each element are:

C: 12.011 g/mol

H: 1.008 g/mol

N: 14.007 g/mol

O: 15.999 g/mol

S: 32.06 g/mol

To calculate the molecular mass of penicillin G, we add the atomic masses of each element in the chemical formula:

Molecular mass = (16 x 12.011) + (18 x 1.008) + (2 x 14.007) + (4 x 15.999) + 32.06

Molecular mass = 334.386 g/mol

Therefore, the molecular mass of penicillin G is 334.386 g/mol.

Learn more about mass here:

https://brainly.com/question/17067547

#SPJ4

False. A sugar is classified as a D isomer if the hydroxyl group on its penultimate carbon (the second to last carbon) is oriented to the right in its Fischer projection.

In a Fischer projection, the horizontal lines represent bonds that are coming out of the plane of the paper, while the vertical lines represent bonds that are going into the plane of the paper. The orientation of the hydroxyl group on the penultimate carbon is determined by looking at the Fischer projection so that the

group is at the top, and the molecule is oriented vertically.

If the hydroxyl group on the penultimate carbon is oriented to the right in the Fischer projection, the sugar is classified as a D isomer. If the hydroxyl group on the penultimate carbon is oriented to the left in the Fischer projection, the sugar is classified as an L isomer.

It's worth noting that the position of the hydroxyl group on the carbon farthest from the carbonyl group does not affect whether a sugar is classified as a D or L isomer. This carbon is not the anomeric carbon, and it does not determine the overall stereochemistry of the molecule.

To know more about carbon :-

brainly.com/question/22530423

#SPJ4

Scientists at IBM used scanning tunnelling microscopy to write the initials of their corporation using 35 individual xenon atoms. The mass of the xenon atom is 7.631 x 10⁻²¹ g

The concept involved in the given problem is mass conversion. The mass conversion establishes connections between grams, moles and atoms. Mole can be used to relate mass of substance to the number of atoms.

Mole is the chemical unit to express the amount of a substance. One mole consists of Avogadro’s number of atoms that is

6.022 x 10²³ atoms

1 mol = 6.022 x 10²³ atoms

The Avogadro’s number acts as a conversion factor between the number of atoms and the number of moles.

The number of moles of a substance can be calculated using following formula:

Number of moles = Number of atoms divided by Avogadro number

The moles of a substance can be converted to grams of the substance using the following formula:

Grams = Moles x Atomic mass

Step: 1

Calculate the moles of Xe atoms by using the relation as follows:

Number of moles = Number of atoms divided by Avogadro number

Thus,

mol of Xe = number of atoms / Avogadro number

= 35/6.022x10²³

= 5.812 x 10⁻²³ mol

Explanation:

The Avogadro’s number acts as a conversion factor between number of atoms and moles. So, divide the number of atoms by Avogadro’s number to get the moles of Xe atoms.

Hint:

Convert the moles of Xe to grams.

Step: 2

Calculate the total mass of letters from the moles of Xe using the following relation:

Grams of Xe = (Moles of Xe) x (Atomic mass of Xe)

=(5.812 x 10⁻²³ mol) x (131.29 gmol⁻¹)

= 7.631 x 10⁻²¹ g Xe

Mole of a substance relates mass of substance to the number of atoms. Convert the number of atoms to moles of Xe using Avogadro’s number. Then convert moles to grams of Xe atoms by multiplying moles with atomic mass of Xe.

Learn more about Mass here:

https://brainly.com/question/5661976

#SPJ4

The observation that shows a change in state of matter has occurred is option A) Wood burns, producing gas and an ashy residue.

A change in state of matter refers to the transformation of a substance from one physical state to another, such as from solid to liquid, liquid to gas, or vice versa. In option A, when wood burns, it undergoes a chemical reaction known as combustion.

During combustion, the wood reacts with oxygen in the air and undergoes a transformation from a solid state to a gaseous state, producing gas (such as carbon dioxide and water vapor) as well as an ashy residue (solid carbon and other impurities remaining after the combustion process). This change in state is accompanied by the release of heat and light.

Option B, where dew forms on the grass overnight, does not indicate a change in state of matter. Dew formation is a physical process known as condensation, where water vapor in the air cools down and changes into liquid water droplets upon contact with a colder surface (such as grass). In this case, the state of matter remains the same (from a gaseous state to a liquid state), and no new substances are formed.

Option C, where an alkali indicator changes color when added to a cleaner, also does not represent a change in state of matter. It suggests a chemical reaction between the alkali indicator and the cleaner, resulting in a color change. However, the states of matter involved (liquid or solid) do not change during this process.

In summary, option A is the observation that indicates a change in state of matter, as it involves the transformation of wood from a solid state to a gaseous state during combustion.

For more such question on matter visit:

https://brainly.com/question/1172629

#SPJ8

An atom is made up of a nucleus containing protons and neutrons surrounded by a cloud of electrons.

Protons and neutrons are collectively known as nucleons and together they make up the nucleus. Electrons orbit the nucleus at different energy levels.Defibrillation is a medical procedure that delivers a therapeutic dose of electrical energy to the heart muscle in order to restore a normal heart rhythm. This electrical energy is delivered by a device called a defibrillator. A glossary is a collection of terms and definitions, usually in alphabetical order, providing an explanation of a specific subject or topic.A glossary is an alphabetically organized list of words and definitions related to a specific topic. It provides an easy reference for understanding the language used in that subject.

learn more about Electrons refer:brainly.com/question/28977387

#SPJ4

NMR signals may consist of a single peak, be split into several peaks, which is known as multiplicity.

The number of peaks of NMR and their relative intensities provide information about the chemical environment of the nuclei being observed. Multiplicity arises from spin-spin coupling between the observed nucleus and one or more neighboring nuclei. This coupling occurs because the magnetic field generated by the neighboring nuclei affects the local magnetic field experienced by the observed nucleus. The pattern of multiplicity can provide valuable information about the number and types of neighboring nuclei and the nature of the chemical bonds between them.

Learn more about NMR here:

https://brainly.com/question/9442853

#SPJ4

In most cases, the formal element that contributes most to the viewer's awareness of the passage of time is the use of duration.

This can be achieved through various means, such as the duration of shots or scenes, the pacing of events, or the progression of the plot. For example, in a film or video, longer shots or scenes can create a sense of leisurely passing time, while quicker cuts or montages can convey a sense of accelerated time. In a musical composition, changes in tempo and rhythm can also contribute to the perception of time passing.Other formal elements, such as lighting and sound design, can also play a role in shaping the viewer's perception of time, but the most direct and significant influence is typically the use of duration.

Learn more about film here:

https://brainly.com/question/14824318

#SPJ4

B) The reactions proceed with a net release of free energy.
Exergonic reactions are those that release energy.

In these reactions, the products have less potential energy than the reactants, and the difference between the two is given off as free energy that can be harnessed to do work. This means that the products have lower free energy than the reactants.
For a reaction to be exergonic, the change in Gibbs free energy (ΔG) must be negative, which indicates that the reaction is spontaneous and will proceed without the input of additional energy. This is in contrast to endergonic reactions, which require an input of energy to proceed.
The rate of exergonic reactions can vary widely, and they may occur at different rates depending on the specific conditions of the reaction, such as temperature, concentration, and catalysts.
Exergonic reactions are important in many biological processes, including the breakdown of glucose in cellular respiration, the hydrolysis of ATP to provide energy for cellular processes, and the digestion of food.

Learn more about exergonic reactions here:

https://brainly.com/question/270229

#SPJ4

From the balanced chemical equation:

1 mol  Mg reacts with 2 mol  Ag Therefore, the number of moles of Ag produced can be calculated as:

[tex]0. 80 mol Mg × (2 mol Ag / 1 mol Mg) = 0.960 mol Ag[/tex]

Therefore , if the reaction starts with 0.80 mol with Mg and continues to the end, 0.960 mol  Ag is formed.

In chemistry, moles are a unit of measurement that are used to describe how much a material is present. Avogadro's number, or roughly 6.022 x 1023 particles, is referred to as the quantity of entities in a substance that is equivalent to that amount. For expressing vast amounts of compounds and doing computations in chemical reactions, moles are a useful unit. Molecules can be employed in a chemical reaction to calculate the quantity of reactants and products and to balance the equation. Additionally, moles are employed in stoichiometry, the area of chemistry concerned with the numerical features of chemical reactions. The mole is a crucial notion in chemical calculations because it gives a mechanism to translate between a substance's mass and the number of particles it contains.

Learn more about "moles." here:

https://brainly.com/question/16713425

#SPJ4

If a reaction starts with 0.480 mol Mg how many moles of silver are produced

Mg + 2AgNO3 --> Mg(NO3) + 2Ag

The enthalpy of vaporization (ΔHvap) of water at 373 K is given as 40.7 kJ/mol. To calculate the heat (q) involved in the vaporization of 8.29 g of water, we need to know the number of moles of water present in this mass.

The molar mass of water is 18.015 g/mol, so the number of moles of water in 8.29 g can be calculated as follows:

n = m / M = 8.29 g / 18.015 g/mol = 0.460 mol

Next, we can calculate the heat (q) involved in the vaporization of 0.460 mol of water using the equation q = n ΔHvap:

q = n ΔHvap = 0.460 mol × 40.7 kJ/mol = 18.7 kJ

So, the heat involved in the vaporization of 8.29 g of water at 373 K is 18.7 kJ.

The number of times a mole of Chromebooks will encircle the moon is  1.59 x 10¹⁶ times.

The number of times a mole of Chromebook will encircle the earth is determined by the length of a Chromebook.

The length of a standard-size school Chromebook is 11.6 inches.

One mole of Chromebook is 11.6 inches long or 0.2946 meters.

Avogadro's number is 6.022 x 10^23.

A mole of Chromebook will have a length =   0.2946 *  6.022 x 10^23.

So, the total length of a mole of Chromebook lined up end to end = 1.75 x 10^24 meters

The circumference of the moon is approximately 10,917 kilometers, which is equal to 10,917,000 meters.

The number of times a mole of Chromebooks will encircle the moon = 1.75 x 10^24/ 10,917,000

The number of times a mole of Chromebooks will encircle the moon =  1.59 x 10¹⁶ times.

Learn more about a mole at: brainly.com/question/29367909

#SPJ1

In an atom, number of electrons and protons is same and thus number of electrons and protons are 79 in an ion of gold(III).

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

No, the properties of two proteins with the same type and number of amino acids but a different order of linkage are not the same.

Proteins are complex biomolecules with unique physical and chemical properties that are determined by their three-dimensional structure, which in turn depends on the specific order and arrangement of amino acids in the protein chain.

The order of amino acids in a protein is known as its primary structure, and it can greatly affect the protein's properties, such as its shape, stability, solubility, and function. Therefore, two proteins with different primary structures, even if they contain the same amino acids, will have different properties, and may interact differently with other molecules and cells in the body.

In conclusion, the primary structure of a protein plays a critical role in determining its properties, and any changes or variations in the order of amino acids can have significant consequences for the protein's structure and function. Therefore, two proteins with the same type and number of amino acids but different primary structures are not the same and can have different properties and functions.

Learn more about proteins

brainly.com/question/29776206

#SPJ4

The molarity of this saturated naoh(aq) solution  0.0142 M.The molarity (M) of a solution is defined as the number of moles of solute per liter of solution.

To find the molarity of a saturated NaOH solution with a concentration of 569 g/L, we need to first calculate the number of moles of NaOH present in one liter of the solution.

The molar mass of NaOH is 40.00 g/mol, so the number of moles of NaOH present in 569 g (or 0.569 kg) is:

moles of NaOH = (0.569 kg) / (40.00 g/mol) = 0.0142 mol

Therefore, the molarity of the saturated NaOH solution is:

Molarity = moles of NaOH / volume of solution in liters

Since we know that the volume of the saturated solution is 1 liter, we can substitute the values:

Molarity = 0.0142 mol / 1 L = 0.0142 M

So the molarity of the saturated NaOH solution is 0.0142 M.

learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4