Option C. The character has a mass of 85. zero kg and weighs 305 N mercury is three.59 Venus is eight.87 Earth is 9. eighty-one mars three.77: C.earth
Earth is expected to be 4.54 billion years old, plus or minus about 50 million years. Scientists have scoured the Earth looking for the oldest rocks to radiometrically date. In northwestern Canada, they determined rocks approximately four.03 billion years vintage.
The earliest existence on earth might have been just as purple as its miles green nowadays, a scientist claims. ancient microbes might have used a molecule other than chlorophyll to harness the solar rays, one which gave the organisms a violet hue. The third planet from the sun, Earth is the handiest region in the acknowledged universe shown to host existence. With a radius of 3,959 miles, Earth is the 5th largest planet in our sun machine, and it's the handiest one regarded as positive to have liquid water on its floor. Earth is also unique in phrases of monikers.
Learn more about Earth here:
https://brainly.com/question/25624188
#SPJ1
A gas is heated from 213.0k to 498.0k and the volume is increased from 23.0 liters to 55.0 liters by moving a large piston within a cylinder. If the original pressure was 1.15 atm, what would the final pressure be?
Include the following within your answer :
Which gas law did you use?
The numerical answer to the question.
An explanation of the correct number of significant figures you will use for the numerical answer.
Final pressure be P₂ = 0.9777 atm.
given data:-
data provided
Volume at first = 23.0 L
1.15 atm initial pressure
The starting temperature is 213.0 K.
498.0 K is the final temperature.
Volume completed: 55.0 L
Final pressure =?
Briefly:-
The generic gas equation states:
P1V1/T1 = P2V2/T2
P1V1/T1 = P2V2/T2 is a formula.
Initial pressure is P1.
Initial volume: V1
Initial temperature is T1.
Final pressure is P2.
Final volume is V2.
T2 = Actual temperature.
P2 = P1V1 T2/ T1 V2 P2 = 1 atm 23.0 L 498.0 K / 213.0 K 55.0 L
P2 = 11454 atm .L. K / 11715 K.L
P₂ = 0.9777 atm.
A piston pressure is defined.The piston force, sometimes referred to as piston cylinder force, is the force applied to the piston while it is under cylinder pressure. An illustration of this force can be seen in a hydraulic system.
To know more about gas equation visit:-
https://brainly.com/question/14812509
#SPJ1
b. explain why water is so good at pulling apart ionic compounds. what do the water molecules do to keep the ions dissolved?
This is related to how polar each water molecule is.
Each water (H2O) molecule has an electric charge on its side of hydrogen, which is slightly positive, and on its side of oxygen, which is slightly negative. It facilitates the separation of ionic compounds into their positive and negative ions in water.
To know more about water as polar solvent, click here,
brainly.com/question/24146048
#SPJ4
ammonium perchlorate is the solid rocket fuel that was used by the u.s. space shuttle and is used in the space launch system (sls) of the artemis rocket. it reacts with itself to produce nitrogen gas , chlorine gas , oxygen gas , water , and a great deal of energy. what mass of oxygen gas is produced by the reaction of of ammonium perchlorate? be sure your answer has the correct number of significant digits.
The numerical coefficients in a balanced chemical process describe the species-mole ratio. This mole ratio is used to compare two species' chemical compositions.
Take into account the balanced reaction for ammonium perchlorate's breakdown:
2 → N₂ + Cl₂ + 4H₂O + 2O₂
We can see from the aforementioned reaction that the amount of ammonium perchlorate that will react and the amount of oxygen gas that will be created are equal. Using the molar mass of 117.49 g/mol to calculate the moles of ammonium perchlorate
moles NH₄ClO₄ = 4.4 g / (117.49 g/mol) = 0.03745 mol
moles O₂ = 0.03745 mol
The oxygen gas moles will then be converted to mass (molar mass = 32 g/mol).
mass O₂ = 0.03745 mol * 32 g/mol = 1.2 g.
Therefore, the mass of oxygen gas produced by the reaction of ammonium perchlorate is 1.2 grams.
To know more about Imole Ratio, refer to this link:
https://brainly.com/question/13386867
#SPJ4
COMPLETE QUESTION:
Ammonium perchlorate, NH₄ClO₄, is the solid rocket fuel used by the U.S. Space Shuttle. It reacts with itself to produce nitrogen gas N₂, chlorine gas Cl₂, oxygen gas O₂, water H₂O, and a great deal of energy. What mass of oxygen gas is produced by the reaction of 4.4g of ammonium perchlorate?
1. What is the atom name(s) of Hydrogen Gas, Salt (Sodium Chloride), Methane, Carbon Dioxide, Oxygen Gas, Air, Water, Hydrochloride Acid, Sodium Hydroxide (lye), Carbonated Water?
Atom in
a- hydrogen gas - H atom
b - Salt = Sodium atom and chlorine atom
c - Methane - carbon , hydrogen atom
d - carbon dioxide = carbon , oxygen atoms
e - oxygen gas = oxygen atom
f - water = hydrogen and oxygen tom
g - hydrochloric acid = hydrogen and chlorine atoms
h - sodium hydroxide = sodium , oxygen and hydrogen atom
I - carbonated water - carbon , oxygen , hydrogen atoms
What is an atom ?
An atom is a particle of matter that uniquely defines a chemical element. Atoms consist of a central nucleus surrounded by one or more negatively charged electrons. Atoms, the smallest units that can decompose matter without emitting charged particles. It is also the smallest unit of matter with the characteristic properties of chemical elements. As such, atoms are the basic building blocks of chemistry.
To know about atom from the link
https://brainly.com/question/6258301
#SPJ13
if 5.01 moles of ti are mixed with 7.86 moles of cl2 and 2.47 moles of ticl4 are formed, what is the percent yield of this reaction? answer in percent to 3 significant figures.
Titanium is also utilized in the construction of portable computer housings and medical implants. Despite being the ninth most prevalent element in the crust of the Earth, titanium is relatively challenging to extract from its ores. Titanium-containing oxide minerals react with solid carbon and chlorine gas to produce titanium tetrachloride and carbrabon dioxide in the first step of the extraction process.
therefore,
5.01+7.86=12.87
12.87/2.47=19.1%
Yeild Percentage is 19.1%
Minerals are naturally occurring inorganic elements or compounds with an organized internal structure, a distinctive chemical composition, crystal shape, and physical characteristics. The yield percentage is 19.1%. Quartz, feldspar, mica, amphibole, olivine, titanium, and calcite are examples of common minerals.
learn more about Yield percentage here:
https://brainly.com/question/14376037
#SPJ4
The reaction below is known as the Thermitt reaction, which is used to form molten iron to mould train tracks
together. What mass of aluminium powder is needed to react with 8.00 g of iron (III) oxide?
2 Al + Fe₂O3 —-> Al₂O3 + 2 Fe
2 Al&3irons with 2fe and 36copper
The mystery element is in group 2 period 6. It has an atomic weight of
137.33. What element is this, and how many protons and electrons and neutrons does it have
The element that is present in group 2 and period 6 of the periodic table is Barium. The number of electrons here is 56, proton is 56 and neutron is 81.
Periodic table is systematic arrangement of the all the known elements, where the elements are arranged in the order of their atomic number. This table helps the for quick understanding of individual properties such as as their mass, electron number, electron configuration and their unique chemical properties.
The columns of the periodic table are called the groups. There are 18 groups in total. Members of the same group in the table have the same number of electrons in the outermost shells of their atoms and form bonds of the same type.
The horizontal rows are called periods. Periods represents to the relationship of orbitals, or likely areas in which electrons will be found, inside the outermost shell of the atom. As we go down the period the more of electron cloud around the nucleus increases. There are total 7 periods in the periodic table.
If we read the periodic table then we will understand that the element which is present in group 2 and period 6 with atomic weight 137.33 is Barium. As the atomic number of Barium is Z=56 so Np=Ne=56. remaining is 81 which is the number of neutrons.
To know more about periodic table
https://brainly.com/question/11155928
#SPJ1
Would you expect the equivalence point ph of the wasb to be slightly acidic, neutral, or slightly basic? how does this compare to the sasb equivalence point ph?.
The equivalence point of the WASB would be slightly acidic, while the equivalence point of the SASB would be slightly basic. This is because the WASB has a higher concentration of hydronium ions than the SASB.
The hydronium ion is a key player in acid-base reactions. It is the hydrogen ion that is donated or accepted in an acid-base reaction. The higher the concentration of hydronium ions, the more acidic the solution.
In an acid-base reaction, the acid donates a hydrogen ion to the base. The base accepts the hydrogen ion. This creates a new molecule of water. The equivalence point is the point at which the acid and base have reacted in a 1:1 ratio. At this point, the solution is neutral.
If the acid has a higher concentration of hydronium ions than the base, then the equivalence point will be slightly acidic. This is because there will be more hydronium ions present than there were at the start of the reaction.If the base has a higher concentration of hydronium ions than the acid, then the equivalence point will be slightly basic.
Learn more about Equivalence point at : https://brainly.com/question/14782315
#SPJ4
determine the volume in ml of a 0.505 m naoh solution required to titrate 40 ml of 0.25 mh2 so4 solution
The volume of required NaOH is 39.6 ml
What is normality?According to the standard definition, normality is expressed as the number of grams or molar equivalents of solute present in one liter of solution. When we say equivalent, this is the number of moles of reactive moieties in the compound.
Base acidity describes the number of ionizable hydroxide groups in the base. NaOH has an ionizable hydroxide group. Hence, the normality of NaOH is 0.5125 N.
For the given case,
N₁V₁ = N₂V₂
Normality = Molarity × Basicity
For H₂SO₄ the basicity is 2
N₂ = 0.25 × 2
= 0.5 N
For NaOH the acidity is 1
N₁ = 0.505 × 1
= 0.505 N
N₁V₁ = N₂V₂
0.505 × V₁ = 0.5 × 40
V₁ = 39.6 ml
To know more about basicity visit:
https://brainly.com/question/15347758
#SPJ4
Write a nuclear equation for plutonium-241 emitting gamma radiation?
⁹⁴Pu₂₄₄-------> ⁹⁵Am₂₄₃ + electron is a nuclear equation for plutonium emitting gamma radiation
What radiation does plutonium 241 emit?Alpha particles plutonium is created in an activator when uranium atoms absorb neutrons. Nearly all plutonium is man-made. Plutonium mainly emits alpha particle is a type of radiation that is easily ceased and has a short range. It also emits neutrons, beta particles, and gamma rays. It also emits neutrons, beta particles, and gamma rays.
It is contemplated toxic, in part, because if it were to be inhaled it could deposit in the lungs and finally cause damage. There are five common isotopes of plutonium because it emits alpha particles, plutonium is most menacing when inhaled.
So we can conclude that Plutonium isotopes emit alpha rays except for plutonium-241 for which the energy of beta electrons is curiously low.
Learn more about Plutonium here: https://brainly.com/question/15186972
#SPJ1
draw the lewis structures for each molecule in the table…
state any three properties that can be used to classify elements
Answer:
The elements on the Periodic Table have been organized into groupings based on the chemical and reactive properties of the elements. The three major groups are the metals, nonmetals, and metalloids. The metals towards the left and lower parts of the Table tend to give up electrons in chemical bonding. The nonmetals to the right and upper parts of the Table tend to accept electrons in chemical bonding. The metalloids some say have an identity crisis and are a band of elements in between the metals and nonmetals which can show characteristics of the bordering groups depending on the type of bonding or chemical reaction. This group is also the foundation of our semiconductor, integrated circuit industries.Other groupings of the elements are into "families" based on the chemical nature of the elements. Some of these are the alkali metals, alkaline earth metals, transition metals, chalcogens, halogens, and inert/noble gases. There is also a semi-grouping of elements above atomic number 83 as these tend to be unstable and show natural radioactivity. Additionally, one could group the elements based on their physical states at room temperatures, such as solids, liquids, and gases.
In all both, chemical and physical properties are used to classify and group elements into useful associative collections based on these attributes. It simply depends on the purpose for the classification.
A concept can help you translate solutions and related data into basic themes.
A concept can help you translate solutions and related data into basic themes is a false statement.
What does the core idea mean?Basic Concepts are those nouns, verbs, and prepositions that let us understand and describe the world. In the context of the home, kindergarten, and school, these ideas are typically learnt as an essential component of the process of language acquisition.
Therefore, note that Action research is the process of carrying out research and turning the results into useful information that practitioners can use to solve issues and boost organizational effectiveness.
Learn more about concept from
https://brainly.com/question/27064002
#SPJ1
See full question below
A concept can help you translate solutions and related data into basic themes. True or false
How do you find the mass number
The mass number is always the number of protons and neutrons together
Ex: 1 protons and 3 neutrons
Mass number: 4
Atomic number (number of protons): 1
Answer:
mass= volume x density
Explanation:
weight is the measure gravitational force acting on a mass
State two ways that active transport is different from diffusion.
Answer: Active transport goes against the gradient causing it to use ATP (energy) unlike diffusion which uses passive. Two types of diffusion are simple diffusion and facilitated diffusion, whereas two types of active transport are primary and secondary active transport.
Explanation: Active energy uses more energy to function rather than diffusion which has multiple types causing it to be different from active transport. Hope this helps!!
what are the ain properties of carbon that explains its presence as a base element of organic compounds
Properties of carbon that explain its presence as a basic element of organic compounds - Catenation and Tetravalent.
Carbon is a chemical element with the symbol C and atomic number 6 (it contains 6 protons in its nucleus). As a member of group 14 in the periodic table, it is non-metallic and tetravalent – making four electrons available to form covalent chemical bonds.
The most common isotope of carbon has 6 protons and 6 neutrons and has an atomic mass of 12.0107 AMU. Its basic electronic configuration is 1s22s22p2.
Properties of carbon that explain its presence as a basic element of organic compounds -
Carbon has the ability to form very long chains of strong and stable interconnecting C-C bonds. This property, called catenation allows carbon to form an almost infinite number of compounds.
Carbon has an affinity for bonding with other small atoms, including other carbon atoms, through the formation of stable covalent bonds. Despite the fact that it is present in a huge number of compounds, carbon is weakly reactive compared to other elements under normal conditions.
To know more about carbon here:
https://brainly.com/question/14760667
#SPJ4
calculate the value of the maximum velocity for an enzyme-catalyzed reaction that follows michaelis-menton kinetics if the initial velocity is 6 mm/s at a substrate concentration of 6 mm. the km for the enzyme system is 2 mm. a) 4.5 mm b) 8 mm c) 8.75 mm d) 12 mm e) 66 mm
The value of the maximum velocity for an enzyme-catalyzed reaction that follows Michalis Menton kinetics if the initial velocity is 6 mm/s at a substrate concentration of 6 mm. the correct option is (C).
The km for the enzyme system is 2 mm is 8mm. The Michalis-Menten equation is commonly used to study the kinetics of reaction catalysis by enzymes as well as the kinetics of transport by transporters. Typically, the rate of reaction (or reaction velocity) is experimentally measured at several substrate concentration values.
A plot of the reaction rate versus the substrate concentration reveals two important kinetic parameters: Vmax and Km .
Vmax is the maximum reaction rate that is observed at saturating substrate concentrations.
Km is referred to as the Michalis constant and is the substrate concentration at which the reaction rate is exactly half of Vmax.
Km is inversely related to the apparent affinity of the enzyme/transporter for its substrate. Therefore, a low numerical value of Km refers to a very high affinity of interaction between the protein and its substrate.
The Michaelis-Menton equation can be written as -
V = Vmax [S] / (Km + [S])
V is the reaction velocity (rate of reaction progression per unit time)
Vmax is the maximum velocity of the reaction.
[S] is the substrate concentration.
Km is the Michaelis constant.
Here V = 6mm/s
Vmax =?
[S] = 6mm
Km = 2mm
putting into equation,
V = Vmax [S] / (Km + [S])
6 = Vmax [6] / (2 + [6])
6 = Vmax [6] / 8
48/6 = Vmax
Vmax = 8mm
The value of the maximum velocity for an enzyme-catalyzed reaction that follows Michaelis Menton kinetics is 8mm.
To know more about Michalis- Menten Equation here:
https://brainly.com/question/28207113
#SPJ4
how many unpaired electrons are in the oxygen atom? this atom is... a. paramagnetic ... b. diamagnetic
There are two unpaired electrons in O2. Hence, it is paramagnetic in nature with two unpaired electrons.
The term paramagnetic refers back to the appeal of material to an external magnetic discipline. The term diamagnetic refers to the repulsion of cloth from an external magnetic area. those substances have as a minimum one unpaired electron. these materials don't have any unpaired electrons.
Paramagnetic is the result of an unpaired electron having a magnetic dipole moment. QED dictates that the magnetic moment of an electron arises from its homes of spin and orbital movement, giving it angular momentum inside the quantum feel.
Paramagnetic materials are the ones which can be attracted by using magnetic area and feature impaired electrons. They lose magnetism within the absence of magnetic area. The greater the number of unpaired electrons, the greater the magnetic second of the substance and as a result extra the paramagnetism.
Learn more about paramagnetic here:- https://brainly.com/question/2272751
#SPJ4
if you measure 0.0356 g of mg for your first trial, how many moles of hydrochloric acid would be needed to react with it? the molar mass of mg is 24.31 g/mol
0.00292 mol of HCL would be needed to react with 0.0356 g of Mg.
Mass of mg = 0.0356 g
Molar mass of mg is 24.31 g/mol
moles of mg= 0.0356/24.31
=0.00146moles
Mg+2HCL→MgCl₂ +H₂
From above equation , 1 mol of mg requires 2 mol of HCL
∴ 0.00146 mol of Mg will require =2×0.00146 mol of HCL
=0.00292 mol of HCL.
#SPJ4
NEED ANSWER IMMEDIATELY: 14. Problem: Uranium-238 has a mass number of 238 with 146 neutrons in the
nucleus. An isotope, Uranium-235 has 143 neutrons in the nucleus. What is
the atomic number of Uranium?
Answer:
92
Explanation:
at the standard temperature , the pressure inside an lp [propane] gas cylinder is 883 kpa. what is , the absolute pressure inside the gas cylinder when it is full, and when it is completely empty?
984 kpa is the absolute pressure of gas cylinder when full.
101 kpa is the absolute pressure of gas cylinder when it’s empty.
Pressure is the force exerted on a particular surface area and we know that Absolute pressure is equal to the sum of gauge pressure and atmospheric pressure .Barometric pressure is the best example for absolute referenced pressure. Absolute pressure is measured in N/m² or pascal & kpa which is short for kilopascal
P(absolute)=P(gauge)+P(atm)
Here P(gauge) is pressure due to the contents present inside the cylinder
P(atm) is the pressure exerted by the atmosphere
=>883 kpa+101 kpa =984 kpa when full
Note that when the cylinder is empty the gauge pressure is zero as there is no substance to exert pressure So, only atmospheric pressure is exerted.
P(absolute)=0(because the cylinder is empty) + 101 kpa
Therefore P(absolute) =101 kpa when cylinder is empty.
To study more about Absolute Pressure visit
https://brainly.com/question/15734722
#SPJ4
what is the ph of a buffer in which the concentration of benzoic acid, c6h5cooh, is 0.075 m and the concentration of sodium benzoate, nac6h5coo, is 0.050 m ?
The answer is 4.02.
Benzoic acid is a weak acid and sodium hydroxide is a strong base. Benzoic acid and sodium hydroxide react to form sodium acetate and water to form a buffer solution. pH can be measured by measuring the voltage developed between two special electrodes immersed in a liquid solution.
Special glass electrodes are called measuring electrodes. It neutralizes benzoic acid to produce benzoate ions, which enter the water layer, leaving two other organic compounds in the ether. Similarly, nitroaniline does not dissolve under neutral or basic conditions but dissolves in acidic solutions. This clearly shows that formic acid is a stronger acid than benzoic acid.
Learn more about Benzoic acid here:-https://brainly.com/question/28299797
#SPJ4
A heat engine operates between a source at 477°c and a sink at 25°c. If heat is supplied to the heat engine at a steady rate of 65,000 kj/min, determine the maximum power output of this heat engine.
The maximum power output of this heat engine is 39,165.75 kJ/min. The result is obtained by using the value of Carnot Efficiency.
What is Carnot Efficiency?The efficiency of a heat engine is generally expressed as
[tex]\eta = \frac{W}{Q_{h}}[/tex]
Where
W = work output (J)Qh = heat energy input (J)The Carnot Efficiency is the maximum efficiency of heat engine that is dependent on the temperatures of the hot source (Th) and the cold sink (Tc). The Carnot Efficiency can be expressed as
[tex]\eta = 1 - \frac{T_{c} }{T_{h}}[/tex]
Where
Tc = temperature of the cold sink (K)Th = temperature of the hot source (K)Given the temperature of the hot source at 477°C and the cold sink at 25°C. The heat is supplied at a steady rate of 65,000 kJ/min.
What is maximum power output of this heat engine?
First, we convert temperature unit from Celsius to Kelvin.
[tex]T_{h} = 477 + 273.15 = 750.15 K[/tex]
[tex]T_{c} = 25 + 273.15 = 298.15 K[/tex]
The Carnot Efficiency is
[tex]\eta = 1 - \frac{T_{c} }{T_{h}}[/tex]
[tex]\eta = 1 - \frac{298.15 }{750.15}[/tex]
[tex]\eta = 1 - 0.39745[/tex]
[tex]\eta = 0.60255[/tex]
The power equals work divided by time. By using the value of Carnot efficiency, the maximum power output is
[tex]\eta = \frac{\frac{W}{t} }{\frac{Q_{h}}{t} }[/tex]
[tex]0.60255 = \frac{\frac{W}{t} }{65.000}[/tex]
[tex]\frac{W}{t} = 65.000 \times 0.60255[/tex]
[tex]\frac{W}{t} = 39,165.75 kJ/min[/tex]
Hence, the maximum power output of this heat engine is 39,165.75 kJ/min.
Learn more about Carnot Efficiency here:
brainly.com/question/15024126
#SPJ4
what is the concentration of hydroxide ions after 50.0 ml of 0.250 m naoh is added to 120 ml of 0.200 m na2so4? please show all work.
The concentration of the hydroxide ions after 50 ml of 0.250M NaOH is added to 120ml of 0.200M Na2SO4 is 7.35 x 10^-2 M.
What is meant by concentration?
Concentration is the total amount of solute present in the given volume of solution. this is expressed in terms of molarity, molality, mole fraction, normality etc. The term concentration mostly refers to the solvents and solutes present in the solution.
Concentration of hydroxide ions can be calculated by,
M (OH^-) = V (NaOH) x M (NaOH) / V (total) = 50ml x 0.250M / 50ml + 120ml = 0.0735M = 7.35 x 10^-2 M.
where M (OH^-) = concentration of hydroxide ions, V(NaOH) = volume of NaOH, M(NaOH) = concentration of NaOH.
Therefore, the concentration of the hydroxide ions after 50 ml of 0.250M NaOH is added to 120ml of 0.200M Na2SO4 is 7.35 x 10^-2 M.
To learn more about concentration click on the given link https://brainly.com/question/17206790
#SPJ4
The percent ionic character of a bond ______ with δen. An arbitrary value of ______ divides ionic from covalent bonding.
As we know that, bond polarity and the ionic character of any compound increases with raise in the difference of the electronegativity.
The percentage of ionic character of the bond increases with δen. An arbitrary value of 50% ionic character separates ionic from covalent bonding.
What does covalent bonding explain?
When two or more atoms share one or more pairs of electrons, a covalent bond is formed. These electrons are attracted to two neutrons and protons simultaneously. A covalent bond is formed when the difference between the electrical configurations of two atoms is too small for an electrochemical reaction to occur and ions to be produced.
What properties do covalent bonds have?
Bonds between atoms in covalent compounds share electrons. They have distinct physical properties, such as lower melting points and electrical conductivity than ionic compounds, due to the sharing of electrons.
To know more about Electronegativity:
brainly.com/question/29217577
#SPJ4
it turns out that ozone, o3 , has a small dipole moment. how is this possible, given that all the atoms are the same?
Ozone has dipole moment even though all the atoms are the same because of the presence of lone pair on the central oxygen atom.
The dipole moment of any molecules is the product of the charge on the either side of the molecule and the distance between them.
As we know, Ozone contains 3 oxygen atoms.
The presence of lone pair on the central oxygen atom bends down the molecule of ozone which indeed give result to the a bent symmetry of ozone molecule. As we know, if a molecule is bent then it is very lightly to have some dipole moment.
Even though there are all the items of same kind but the charge on all the three atoms is different which gives contribution in the formation of the dipole moment. So, we can conclude here that the small dipole moment in ozone molecule is observed because of the presence of the lone pair and symmetry of the molecule.
To know more about dipole moment, visit,
https://brainly.com/question/11626115
#SPJ4
Rubbing alcohol has a density of approximately .79 g/mL
Baby oil has a density of approximately
.83 g/mL
Would rubbing alcohol float on top of or sink underneath the baby oil?
Since the density of rubbing alcohol is lower than the density of baby oil, rubbing alcohol will float on top of the baby oil.
What is density?The density of a substance is the ratio of the mass of the substance and its volume. It is mathematically expressed as:
Density = mass/volume
It is the property that measures how densely packed the molecules of a substance are.
The density of water is approximately 1 g/mL. Substances whose densities are lower than that of water will float on while those whose densities are higher than that of water will sink in it.
Two immiscible liquid substances will either float over or sink under one another depending on their densities. The liquid with the lower density will float while the one with the higher density will sink.
Thus, if the density of rubbing alchohol is 0.79 g/mL and that of baby oil is 0.83 g/mL, it means that the rubbing alcohol will float over the baby oil.
More on density can be found here: https://brainly.com/question/15164682
#SPJ1
examine the given beer's law standard curve for an unknown dye measured in a 1.0 cm cuvette. what is the concentration (in m) of a sample of the unknown dye with an absorbance of 0.32 at 542 nm?
Concentration of unknown sample with an absorbance of 0.32 at 542 nm is 2.22 × 10^-5 M.
What is Beer's law ?
Beer's Law is an equation that connects a material's characteristics to light attenuation. According to the law, a chemical's concentration and a solution's absorbance are exactly related. Using a colorimeter or spectrophotometer, the relation can be used to calculate the concentration of a chemical species in a solution. The UV-visible absorption spectroscopy is where the connection is most frequently applied. Be aware that at high solution concentrations, Beer's Law is invalid . Beer's law suggest that absorbance and concentration of a sample at a particular wavelength varies linearly. Now the best fit line equation for unknown sample is given as , y = 15200x - 0.018 where y is absorbance and x is concentration of sample . At an absorbance of 0.32 , put y = 0.32 in given equation we get the concentration .
To know about the Beer's Law ,click the link given ;
https://brainly.com/question/18591932
#SPJ4
onsidering that the naoh should be within a few percent of 0.30 m, what volume (in ml) would you expect to use for your third trial with 2.0453 g of khp?
The volume (in ml) would we expect to use for our third trial with 2.0453 g of KHP will be 33.0 ml
Molarity of NaOH = 0.30 molar
Mass of KHP = 2.0353 G
Molar mass of KHP = 204.2 g/mol
Volume of NaOH = ?
First we will find out the number moles of KHP
number of moles = mass / molar mass
number of moles of KHP = 2.0453 g / 204.2 g/mol
number of moles of KHP = 0.010 mol
Now we will find out the volume of NaOH
volume = number of moles / molarity
volume of NaOH = 0.010 mol / 0.30 M
volume of NaOH = 0.033 L
Conver L to ml
volume of NaOH = 0.33 L * 1000
volume of NaOH = 33.0 ml
You can also learn about molarity from the following question:
https://brainly.com/question/8732513
#SPJ4
Fluorine,chlorine and iodine are all part of which family in the periodic table
