Answer: Water is the only known substance on Earth that exists naturally in three states: solid, liquid, and gas.
Explanation:
If I add water to 100mL of a 0.15M NaOH solution until the final volume is 150mL, what will the molarity of the diluted solution be?
A. 0.100M
B. 1.2M
C. 0.01M
D. 52.8M
Answer : A
0,15 moles of NaOH -------in-------1000ml
x moles of NaOH ---------in-------100ml
x= 0,015 moles of NaOH
final volume =150ml
0,015 moles of NaOH -------in------150ml
x moles of NaOH ------in--------1000ml
x= 0,1 moles of NaOH
The molecule BF3 is an example of a resonance structure.
TRUE O FALSE
Answer:
False, it's not an example of a resonance structure.
Representa gráficamente con una breve descripción de los modelos de Bohr correspondientes a los siguientes elementos representativos: Nitrógeno, Sodio, Calcio, Bromo, Neón
Answer:
Here's what I get
Explanation:
1. Nitrogen
A nitrogen atom has a central positively-charged nucleus surrounded by seven electrons. Two are in the first energy level and the other five are in the second.
2. Sodium
In a sodium atom 11 electrons surround the nucleus in three energy levels in a 2-8-1 order.
3. Calcium
In a calcium atom 20 electrons surround the nucleus. The electron shell configuration is 2-8-8-2.
4. Bromine
The Bohr model of a bromine atom would show 35 electrons surround the nucleus in a is 2-8-8-17 shell configuration.
More modern variations use principal quantum numbers and a 2-8-18-7 arrangement.
5. Neon
A neon atom has 10 electrons surrounding the nucleus in a 2-8 shell configuration.
need help on this im super lost
Answer:
A
Explanation:
The picture given in the question is very difficult to understand. Please the picture attached below. It may help you more to understand.
..
A potential energy diagram shows the change in potential energy of a system as reactants are converted into products.
Consider the nuclear equation below. Superscript 222 subscript 86 upper R n right arrow superscript 218 subscript question mark upper P o plus superscript 4 subscript 2 upper H e. Which is the missing value that will balance the equation? 84 86 88 90
Answer:
84
Explanation:
From the question given above, it is evident that 222 86Rn is emitting alpha particle since the daughter nuclei produced has a mass number lesser than 4 when compared to parent element.
Therefore, the miss value in the equation is 84.
Please see attachment for further details
Based on the calculations, the missing value that will balance the equation is: A. 84.
What is an alpha decay?An alpha decay is a type of nuclear reaction in which the atomic nucleus of a radioactive element emits an alpha particle (helium atom), thereby, producing chemical elements with a different atomic nucleus.
In this exercise, we are given the following nuclear equation with an alpha decay:
²²²R₈₆ -----> ²¹⁸Poₓ + ⁴He₂
For the subscript, we have:
86 - 2 = 84.
Read more on alpha decay here: brainly.com/question/23303931
#SPJ2
The endocrine system sends hormones through the blood to control the activities of tissues and organs.
Group of answer choices
a. True
b. False
answer:it is false
explanation: as it is true or false I think you don't need explanation
Why would a plant use the energy and resources to grow a fruit?
Answer:
because a fruit holds the seeds it needs to reproduce and continue living.
which group are most stars found in
Answer:
The White Dwarfs are very hot stars, which are small in size and relatively dim. They are found in the lower left of the H-R Diagram. The Main Sequence is a band of stars, which includes most of the stars, like our Sun. These are usually smaller stars, often dwarf stars.
Explanation:
Answer:
Found along a region called the Main Sequence
Explanation: Main sequence starts vary widely in effective temperatures but the hotter they are the more luminous they are
What type of elements are ionic bonds composed of?
Answer:
A metal and a nonmetal
Explanation:
Picture NaCl, the most famous example of an ionic compound. Two ions, Na+ (sodium) and Cl- (chlorine) are joined by an ionic bond.
Sodium, the metal, gives up an electron to chlorine.
Chlorine, the nonmetal, accepts an electron from sodium.
That way both have 8 electrons in their outer shell! This is the way ionic bonds function.
what is the type of bonding for ammonium lauryl sulfate?
Answer:
Hydrogen bonding.
Explanation:
Ammonium lauryl sulfate is also known as ammonium dodecyl sulfate there are two parts in Ammonium lauryl sulfate one is nonpolar hydrocarbon and other part polar sulfate group.
Due to polarity of sulfate group its form hydrogen bond very easily.
It is mainly used as foaming agent the main reason of its use is very much soluble in water and making hydrogen bond with water.
What is the concentration of a 15.0 mL sample of HCl if 28.2 mL of 0.150 M NaOH is needed to reach the equivalence point?
Answer:
0.282 M
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
The concentration of the 15.0 mL sample of HCl is 0.282 M.
To find the concentration of HCl, we can use the concept of stoichiometry and the balanced chemical equation for the reaction between HCl (acid) and NaOH (base):
[tex]HCl + NaOH - > NaCl + H_2O[/tex]
The balanced equation shows a 1:1 mole ratio between HCl and NaOH. Therefore, the moles of HCl that reacted will be equal to the moles of NaOH used at the equivalence point.
First, we find the moles of NaOH used:
Moles of NaOH = Volume (in L) × Concentration
Moles of NaOH = 0.0282 L × 0.150 mol/L = 0.00423 mol
Since the moles of HCl and NaOH are equal, the moles of HCl are also 0.00423 mol.
Now, we calculate the concentration of HCl:
Concentration of HCl = Moles of HCl / Volume (in L)
Concentration of HCl = 0.00423 mol / 0.0150 L = 0.282 M
To know more about balanced chemical equation , here
brainly.com/question/29130807
#SPJ2
how many elements are in 2CaCO3 pls help
In 2CaCO3 there are 3 elements
I hope that helped you! If you have any further questions comment down below or message me! Good luck!
What conclusion can you draw from the heating curve?
Answer:A heating curve graphically represents the phase transitions that a substance undergoes as heat is added to it. The plateaus on the curve mark the phase changes. The temperature remains constant during these phase transitions.
How is the molar mass of an element different from the atomic mass of an element?
Leonard adds 5 grams of sugar to 1 liter of water to make one sugar solution. Then he adds 10 grams of sugar to 1 liter of water to make another sugar solution. Which statement correctly compares these solutions?
Answer:
See explanation below
Explanation:
There are many statements and ways to compare both solutions, but the commons one are concentration or molarity, and %m/V.
Both of these statements are valid to compare both solutions, however, molarity is the best to use because with a single number, we can see which solution is more concentrated.
To calculate the molarity of any solution we use the following expression:
M = n/V
n: number of moles of solute.
V: volume of solution in liter.
Now, as the solvent of the solution is water, and the solute is a solid, the volume of solution will be the same volume of the solvent.
The common sugar is the sucrose, and the molecular formula of this is C12H22O11, the molar mass is 342.3 g/mol.
With this, we can calculate the moles:
n = m/MM
n₁ = 5/342.3 = 0.0146 moles
n₂ = 10/342.3 = 0.0292 moles
Now, it's time to see the concentration of each solution:
M₁ = 0.0146 / 1 = 0.0146 M
M₂ = 0.0292 / 1 = 0.0293 M
With this we can conclude that solution 2 is more concentrated than solution 1. In other words M₂ > M₁
What organelle does the process of cellular respiration?
Answer:
Mitochondria
Explanation:
The mitochondrion is the site of cellular respiration. The first part of cellular respiration (glycolysis) happens in the cytoplasm. The second part of cellular respiration needs oxygen, and it occurs in mitochondria.
A 0.050L solution of Ba(OH)2 is neutralized by 0.072L of a 0.55 M HNO3 solution. What is the concentration of the Ba(OH)2 solution?
Answer:
0.396M
Explanation:
Step 1:
The balanced equation for the reaction. This is given below:
2HNO3 + Ba(OH)2 —> Ba(NO3)2 + 2H2O
From the balanced equation above,
The mole ratio of the acid (nA) = 2
The mole ratio of the base (nB) = 1
Step 2:
Data obtained from the question. This include the following:
Volume of base (Vb) = 0.05L
Concentration of base (Cb) =..?
Volume of acid (Va) = 0.072L
Concentration of acid = 0.55 M
Step 3:
Determination of the concentration of the base, Ba(OH)2.
The concentration of the base, Ba(OH)2 can be obtained as follow:
Cava /CbVb = nA/nB
0.55 x 0.072 / Cb x 0.05 = 2/1
Cross multiply to express in linear form
Cb x 0.05 x 2 = 0.55 x 0.072
Divide both side by 0.05 x 2
Cb = (0.55 x 0.072) / (0.05 x 2)
Cb = 0.396M
Therefore, the concentration of the base, Ba(OH)2 is 0.396M
In order to control pollution, you should reduce the need for _____________ goods and transportation.
Answer:manufacture
Explanation:
The pollution can be controlled with the help of reducing the need for the manufactured good and transportation.
What is pollution?A pollution can be given as the presence of the harmful substances in the environment. The harmful substances known as pollutants deteriorate the quality of the environment and effect the health of living organism as well.
The pollution in air has been contributed with the increased need of the manufactured goods and transportation, and thereby the reduction will be found to reduce the pollution too.
Learn more about pollution, here:
https://brainly.com/question/23615409
#SPJ2
In the graph above for the dissociation of a strong acid, why do the bars for H3O+ and A- have the same height as the bar for HA?
Answer:
The concentration of HA is the same as concentration of H3O+ and A- produced.
Explanation:
The dissociation equation is given below:
HA(aq) + H2O (l) —> H3O+(aq) + A-(aq)
From the reaction above, we can see that the acid is monoprotic acid i.e it has only 1 ionisable hydrogen atom.
Now, from the balanced equation, we can see that the acid produced equal concentration of H3O+ and A-.
This account for the reason why the bars for H3O+ and A- have the same height as the bar for HA.
If a strong base, like NaOH, is added to a strong acid, like HCl, the pH of the resultant solution will _________. A.) Go up B.) Go down C.) Stay the same
Answer:
B.) Go down
Explanation:
Hello,
In this case, a strong base like NaOH has a high pH based on the scale wherein 7 is neutral, above 7 is basic and below 7 is acid. In such a way, by adding an acid, having a low pH, once it is added, the pH will go down until the equivalence point, which for strong base and strong acid should be 7.
Best regards.
Answer:
B) Go down
Explanation:
pH is defined as -log [H⁺], that means when concentration of H⁺ increases the pH decreases and when concentration of H⁺ decreases, pH increases.
When a strong acid as HCl is added to a solution, it is dissolved, thus:
HCl → H⁺ + Cl⁻
Thus, addition of a strong acid decreases pH because concentration of H⁺ increases.
Right answer is:
B) Go down
All chemicals pollute the environment.
True
False
Answer:
False,not all chemicals pollute the enviorment
Explanation:
Hope this helps!
Brainliest?
Answer:
False
Explanation:
Oxygen?
(a) The original value of the reaction quotient, Qc, for the reaction of H2(g) and I2(g) to form HI(g) (before any reactions take place and before equilibrium is established), was 5.56. On the following graph, plot the points representing the initial concentrations of all three gases. Label each point with the formula of the gas.
Answer:
Here's what I get
Explanation:
Assume the initial concentrations of H₂ and I₂ are 0.030 and 0.015 mol·L⁻¹, respectively.
We must calculate the initial concentration of HI.
1. We will need a chemical equation with concentrations, so let's gather all the information in one place.
H₂ + I₂ ⇌ 2HI
I/mol·L⁻¹: 0.30 0.15 x
2. Calculate the concentration of HI
[tex]Q_{\text{c}} = \dfrac{\text{[HI]}^{2}} {\text{[H$_{2}$][I$_{2}$]}} =\dfrac{x^{2}}{0.30 \times 0.15} = 5.56\\\\x^{2} = 0.30 \times 0.15 \times 5.56 = 0.250\\x = \sqrt{0.250} = \textbf{0.50 mol/L}\\\text{The initial concentration of HI is $\large \boxed{\textbf{0.50 mol/L}}$}[/tex]
3. Plot the initial points
The graph below shows the initial concentrations plotted on the vertical axis.
The initial concentration of the HI at the time 0 sec, has been 0.05 mol/L.
The balanced chemical equation for the reaction has been:
[tex]\rm H_2\;+\;I_2\;\rightarrow\;2\;HI[/tex]
The given initial concentration of hydrogen has been 0.030M, and the given concentration of iodine has been 0.015 M.
The reaction quotient for the following reaction has been:
Reaction quotient = [tex]\rm \dfrac{[HI]^2}{[H_2]\;[I_2]}[/tex]
The concentration of HI for the reaction quotient 5.56 has been:
5.56 = [tex]\rm \dfrac{[HI]^2}{[0.030]\;[0.015]}[/tex]
[tex]\rm [HI]^2[/tex] = 0.0025 M
HI = 0.05 mol/L or 0.05 M.
The concentration of the HI at the initial concentration has been 0.05 mol/L.
The graph attached has been plotted as the concentration as the function of time.
The initial concentration of hydrogen, iodine, and hydrogen iodide have been plotted as the function of time.
For more information about the reaction quotient, refer to the link:
https://brainly.com/question/8205004
Complete and balance this neutralization reaction: HNO3 + Al(OH)3
Answer:
Al(OH)3 + HNO3 = Al(NO3)3 + H2O - Chemical Equation Balancer.
Explanation:
A group of tissues working together is?
Answer:
An organ
Explanation:
An organ is one or more tissues that work together to form a specific function.
- Hope that helps! Please let me know if you need further explanation.
Which statement best describes the difference between nuclear fission and nuclear fusion reactions?
Answer:
They are both nuclear reactions that produce energy.
Fission is the splitting of heavy, unstable nucleus into two lighter nuclei.Fusion is the process where two light nuclei combine together (this process releases a vast amount of energy)During light-dependent reactions, carbon dioxide is converted to glucose.
Group of answer choices
True
False
Answer:The light-independent reactions use the ATP and NADPH from the light-dependent reactions to reduce carbon dioxide and convert the energy to the chemical bond energy in carbohydrates such as glucose.
Explanation:step-by-step
Answer:
FALSE
Explanation:
I just took the test and put true and it was wrong so it's false. Hope this helps and please mark brainliest!
is it true that Different atoms of an element have the same number of protons.
Answer:
No.
Explanation:
All the elements have the different number of protons .
Answer:
no it is not true because atoms may have the same number of neutrons but they never have the same number of protons
Explanation:
What is the charge of an atom's nucleus of an atom has 20 protons, 23 neutrons, and 18 electrons?
Answer:
It would have a charge of +2.
Explanation:
A proton has a charge of +1, an elctron has a charge of -1, and a neutron has a charge of 0. Ignore the neurons since they have a charge of 0. Since there are 20 protons and 18 electrons (20-18), the overall charge of the atom is +2.
Discribe how an internal combustion engine works. What is drawback to the type of power?
Answer:
An internal combustion engine is a heat engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber. The force of combustion is converted into mechanical energy through the use of levers and gears. The by products of combustion include energy, water vapor, carbon dioxide (CO2), nitric oxide (NO), nitrogen dioxide (NO2), and carbon monoxide (CO). The two primary drawbacks to the internal combustion engine are the primary energy source is non-renewable (fossil fuels) and the by products can have damaging effects on the environment.
Explanation:
Please help(15 points)
Why aren’t granite, copper, or petroleum found everywhere on Earth’s surface?
Answer: because they take a lot of tie to form
