The gene contains the instructions to make a protein that has information about the genetic characters of an organism.
Inside our cells there is presence of DNA.
It is a double stranded deoxyribonucleic acid.
This DNA is the place where the genetic characters resides.
But this DNA is made up of different things like the sugar.
So the genetic material is found in a part of DNA called a gene.
A gene is a short section of DNA.
The genes contain instructions that tell your cells to make molecules called proteins. Proteins perform various functions in your body to keep you healthy. Each gene carries instructions that determine your features, such as eye colour, hair colour and height.
Therefore, the gene contains the genetic information and the instructions to make a protein which determines the characteristics of an individual.
To learn more about genes, refer: https://brainly.com/question/8832859
#SPJ4
Is called radiogenic heat?.
Within the subject of technology, radiogenic heat may be described because of the type of warmth that is released when radioactive isotopes disintegrate. consequently, we say that the thermal strength is launched by means of the nuclear disintegration of the radioactive isotopes.
Approximately 50% of the Earth's inner warmness originates from radioactive decay. four radioactive isotopes are chargeable for the general public of radiogenic warmness because of their enrichment relative to different radioactive isotopes uranium-238 (238U), uranium-235 (235U), thorium-232 (232Th), and potassium-40 (40K).
Radioactive heating refers back to the power dissipated within the interiors of planets, satellites, or asteroids as a consequence of the radioactive decay of radioactive isotopes (see radiochemistry). Radioactive isotopes are characterized by their decay energies and their half-lives.
Learn more about the heat here
https://brainly.com/question/934320
#SPJ4
What happens to inflation and unemployment during a period of stagflation?.
The inflation rate will be high or increasing and unemployment will remains steadily high during a period of stagflation.
What is Inflation?Inflation can be described as the rate of increase in prices over a given period of time howver the Inflation serves as the broad measure, which can be seen in the overall increase in prices as well as the increase in the cost of living in a country.
It should be noted that in economics, stagflation can be regarded as the recession-inflation which is a case wheeby inflation rate is high or increasing, and in this case the economic growth rate slows, whereby the unemployment remains steadily high and thee will be a problem in the process of making economic policy, becvauise when trying to lower inflation may affect unemployment.
In conclusion, inflation rate will be high and in this case the unemployment will remains steadily high as a result of stagflation.
Learn more about inflation at:
https://brainly.com/question/8149429
#SPJ1
Determine the magnitude of the initial vertical velocity of the projectile, viy, when the magnitude of its initial velocity, vi, was 40. meters per second. [1]
A projectile was fired with initial velocity of 40 m/s and at angle 30⁰ above the horizontal. Its initial vertical velocity is 20 m/s.
In a projectile motion, at a time instant t, the velocity v can be divided into its horizontal and vertical components: vx and vy. Let the projectile is fired at angle θ above the horizontal, then:
vx = v cos θ
vy = v sin θ
Where:
v = velocity at time instant t
Parameters given:
v = 40 m/s
θ = 30⁰
Hence, the vertical velocity is:
vy = v sin 30⁰
= 40 . 1/2 = 20 m/s
Complete question:
Determine the magnitude of the initial vertical velocity of the projectile, vy, when the magnitude of its initial velocity, v, was 40. meters per second and the angle is 30⁰ above the horizontal.
Learn more about projectile motion here:
https://brainly.com/question/25928005
#SPJ4
4) from the plots, determine the short-circuit current corresponding to the same value of field current which produced the rated open-circuit voltage.
Short circuit current vs field current slope from the curve for If=0.2 and If=0.4.
Slope = (Isc(If=0.4)-Isc(If=0.2))/2
An electric current modern-day is a circulation of charged debris, which include electrons or ions, transferring through an electrical conductor or space. it's miles measured because the net charge of go with the flow of electrical charge thru a floor or into a manipulated volume.
The current flowing in a circuit may be utilized in a diffusion of approaches from producing warmness to inflicting circuits to exchange, or statistics to be stored in an integrated circuit.
There are three simple currents utilized in business healing electric stimulation units: direct cutting-edge, alternating contemporary, and pulsed modern-day.
Learn more about current here:-https://brainly.com/question/1100341
#SPJ4
What are the main characteristics of Romanticism?.
The main characteristics of Romanticism are - Glorification of Nature ,Awareness and Acceptance of Emotions, Celebration of Artistic Creativity and Imagination, Emphasis on Aesthetic Beauty.
Popular in the late 18th and early 19th centuries, Romanticism was defined as the literary movement that emphasized the nature and the importance of the emotion and the artistic freedom.
The characteristics described as :
Glorification of Nature
Nature, in all its unbound glory, plays the huge role in the Romantic literature. Nature, sometimes seen just opposite of the rational, is a powerful symbol in work from this era.
Awareness and Acceptance of Emotions
A focus on emotion is one of the key characteristic of nearly all writing from the Romantic period.
Celebration of Artistic Creativity and Imagination
In contrast to the previous generations focus on reason, writers of the Romantic movement also explored the importance of the imagination and the creative impulse.
Emphasis on Aesthetic Beauty
Romantic literature also explores the theme of the aesthetic beauty, not just of the nature but of people as well. This was especially true when female beauty is described .
To know more about Romanticism, visit here:
https://brainly.com/question/821735
#SPJ4
In a certain population, the frequencies of two alleles A and a are equal. The population inbreeds such that f = 0.3. What is the frequency of each genotype in the population? Multiple Choice AA: 0.35, Aa: 0.3, aa: 0.35 AA: 0.325, Aa: 0.35, aa: 0.325 AA: 0.25, Aa: 0.5, aa: 0.25 The genotype frequencies cannot be calculated from the provided information.
The frequency of AA individuals is 0.25, the frequency of Aa individuals is 0.5, 0.25 the frequency of aa individuals is
What is frequency?
The frequency of a repeating event is its number of instances per unit of time. In some cases, it is also referred to it as temporal frequency or ordinary frequency to emphasise differences with spatial and angular frequencies, respectively. One (event) per second is equal to one hertz (Hz), which is how frequency is expressed. The period is indeed the reciprocal of a frequency because it is the length of time for one cycle in a repeating event. When a heart beats 120 times per minute (2 hertz), for instance, the period (T), or space between beats, is half a second. In science and engineering, frequency is a crucial parameter for describing the temporal rate of change seen in oscillatory as well as periodic phenomena.
Let q and p represent the frequency of each allele, respectively.
If A and a have equal frequencies, then p = q = 0.5
because p + q = 1. The equation p2+2pq+q2 = 1
can be used because the population has been in
Hardy-Weinberg equilibrium.
As a result, the frequency of AA individuals is p2 = 0.52 = 0.25,
the frequency of Aa individuals is 2pq = 2 x 0.5 x 0.5 = 0.5,
and the frequency of aa individuals is q2 = 0.52 = 0.25.
To learn more about frequency
#SPJ4
what will happen to the force needed to keep something in a circular path if the radius doubles while other variables stay the same?
The force doubles as it is directly proportional to the radius.
Does anything move faster when it follows a circular path?A shift in velocity can occur in either its magnitude (speed), its direction, or both. Even if the speed may be constant in uniform circular motion, there is always an accompanying acceleration since the direction of the velocity is continually changing.
What maintains the car's trajectory in a curve?Friction between the tyres and the road causes the centripetal force that causes the car to turn in a circular motion. If there isn't enough friction, the car will move in a curve with a larger radius and veer off the road.
Learn more about centripetal force here:
brainly.com/question/11324711
#SPJ4
a compact disc contains an extremely thin sheet of aluminum. if you put a larger block of metal in a microwave oven along with a cd and turn the oven on, what happens?
If you put a larger block of metal in a microwave oven along with a cd and turn the oven on Only the CD becomes hot enough to soften and sparks dance about its surface.
CDs use very thin aluminum foil. When you put a large metal block in the microwave with the CD and turn on the oven, only the CD gets hot enough to soften and spark off its surface. Microwaves transfer heat to food primarily through water molecules.
Microwaves transfer heat to food primarily through water molecules. Higher frequencies and shorter wavelengths. A microwave oven heats water because microwave radiation interacts with the dipoles of water molecules. Microwaves spin water molecules back and forth at roughly the same frequency as microwaves, giving them energy.
Learn more about Microwaves here:- https://brainly.com/question/1304742
#SPJ4
Suppose we see an exoplanet dim the light of a distant star by 1%. If the star has a diameter of 1. 4 million km, what is the approximate diameter of this planet?.
The approximate diameter of this planet is 140,000 km.
From the question, we have
exoplanet dim the light of a distant star by 1%
the ratio of the diameter of planets and stars is 1: 100
The approximate diameter of this planet is
= 1,400,0000 × 1/100 = 140,000 km
Exoplanet:
Astronomers have directly observed the spectrum of visible light bounced off an exoplanet for the first time ever. The simplest extrasolar planets to find by the radial-velocity method are hot Jupiters because the oscillations they induce in the motion of their parent stars are relatively massive and rapid compared to those of other types of planets. The size of the Neptune planets is similar to that of our solar system's Neptune or Uranus. It was first found ten years ago by the NASA satellite Kepler. Two stars, Kepler-16b and Kepler-17b, rotate around and around one another.
To learn know more about exoplanet, visit:
brainly.com/question/13045955
#SPJ4
How does neighborhood influence your life?.
Environmental hazards such as neighborhood violence and pollution can lead to poor health conditions.
The chronic stress of living in an area with high crime poverty and dilapidated buildings can affect parenting and in turn affect children. How you view your neighborhood and the people around you can also change how you interact with the people around you.
Areas with poor housing few or no libraries unsafe public spaces, and poverty can lead to depression and negatively affect personal relationships. Neighborhood effects on voting behavior. In political science, the neighborhood effect defines an individual's propensity to vote in a particular direction based on the relationship effects of those who live nearby.
Learn more about Neighborhood here:-https://brainly.com/question/7566863
#SPJ4
What is the relationship between dipole moments and the magnitude of the partial charges?.
The relationship between dipole moments and the magnitude of the partial charges is that they are directly proportional
What is relationship between dipole moments and the magnitude of the partial charges ?The dipole moment increases with the magnitude of the electronegativity difference. The size of the dipole moment is also determined by the charge separation distance. A measurement of a molecule's polarity is its dipole moment.
The bond dipole moment's size depends on the atoms' distance from one another and their partial charges. Because not all polar molecules have the same amount of a dipole moment, not all molecules are equally impacted by electric fields.
Learn more about Dipole moments here:
https://brainly.com/question/11626115
#SPJ4
a 0.75-kg block slides on a rough horizontal table top. just before it hits a horizontal ideal spring its speed is 3.5 m/s. it compresses the spring 5.7 cm before coming to rest. if the spring constant is 1200 n/m, the thermal energy of the block and the table top must have:
The thermal energy of the block and the table top must have 2.64J
Thermal energy of block W = KE
W = 1/2 m[tex]v^{2}[/tex]
Thermal energy of table top compressed by the spring
W = PE
W = 1/2 K[tex]x^{2}[/tex]
Total energy of block and table tab is
W = KE - PE
= 1/2 m[tex]v^{2}[/tex] - 1/2 K[tex]x^{2}[/tex]
W = 2.64J
Thermal energy is the term used to describe the energy present in a system that determines its temperature. The movement of thermal energy is heat. Thermodynamics is an entire field of physics that examines how work is done and how heat is transferred between various systems (see the first law of thermodynamics). In many physics and engineering contexts, the term "thermal energy" is used figuratively. It can refer to a number of distinct, clearly defined physical concepts. Included in this are the internal energy or enthalpy of a body of matter and radiation, heat, which is a form of energy transfer (as is thermodynamic work), and the characteristic energy of a degree of freedom.
Learn more about thermal energy here:
https://brainly.com/question/11278589
#SPJ4
what relationship do you see between the pressure line and the wind speed line on your graph? (hint: remember that pressure gradients, not low pressure itself creates strong winds.)
A difference in air pressure that is horizontal causes wind.
Fluids (i.e., liquids or gases) can apply pressure in addition to solid surfaces. You might find this unusual if you give it some thought because it's difficult to envision driving a nail with liquid. Imagine being in some depth of water to help you understand this. The weight of the water above you would be pressing down on you due to gravity, which would generate pressure on you. Going deeper would result in more water above you, which would also result in additional weight and pressure from the water. Both the weight of gases and the weight of liquids have the ability to apply pressure. The significant weight of the air in our atmosphere, for example, plus the fact that we're almost always at the bottom of it.
Learn more about pressure here:
https://brainly.com/question/28012687
#SPJ4
An inductor with L = 9.55 mH is connected across an ac source that has voltage amplitude 49.0 V You may want to review (Pages 1023 -1028) For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of An inductor in an ac circuit Part A What is the phase angle ф for the source voltage relative to the current? Express your answer with the appropriate units. ANSWER:
The phase angle ф for the source voltage relative to the current the and Frequency is 192.14 H.
Phase angle b/w VL and inductor is 90°
Angular frequency, w = 2 pi f
VL = I XL
Frequency, f = VL/2 pi L I = 49/(2 pi x 4.25 x 0.00955) = 192.14 Hz.
The formula = 2/T yields the angular frequency. In radians per second, the angular frequency is expressed. The frequency, f = 1/T. the reciprocal period. The number of full oscillations per unit of time is given by the motion's frequency, f = 1/T = /2. Angular frequency and velocity are related to displacement and revolution velocity, respectively. full response Angular frequency is a scalar measure of rotation rate, also known as angular speed, radial frequency, circular frequency, and orbital frequency.
Learn more about Phase angle here:
https://brainly.com/question/29340593
#SPJ4
a 7.2 kg mass sits at rest on a rough surface the surface has the following coefficients of friction coefficient of static friction 0.52 and coefficient of kinetic friction 0.29 determine the necessary applied force required to cause an acceleration of 1.6 m/s^2
The force required to accelerate is 28 N.The acceleration of a cart with a mass of 25 kg and applied force of 50 N is 2 m/s².
Determine the necessary applied force required to cause an acceleration ?The mass of a block of ice that is accelerated to 6 m/s2 by a force of 3 Newtons is 0.5kg.A free body diagram is a sketch of forces acting on an object. It consists of the applied force, weight of the object, frictional force and normal reaction.Force required to accelerate the block .The force required to accelerate the block is calculated as follows;F = ma
F = 3.5 kg x 8 m/s²
F = 28 N
Acceleration that cart
The acceleration of a cart with a mass of 25 kg and applied force of 50 N is calculated as follows;
a = F/m
a = 50/25
a = 2 m/s²
Mass of the block of ice
The mass of a block of ice that is accelerated to 6 m/s2 by a force of 3 Newtons is calculated as follows;
m = F/a
m = 3 N / 6 m/s²
m = 0.5 kg
To learn more about acceleration refer
https://brainly.com/question/28743557
#SPJ4
the galactic distances used to measure the acceleration of the universe are determined by observations of question 6 options: a) trigonometric parallax b) hubble's law c) exploding white dwarfs (supernovae) d) cepheid variable stars
The galactic distances used to measure the acceleration of the universe are determined by observations of exploding white dwarfs (supernovae). Correct answer: letter C.
Because the brightness of a supernova is known very precisely. By measuring the brightness of a supernova, astronomers can calculate its distance from Earth. This allows them to measure the distance of far away galaxies and compare them over time to determine the acceleration of the universe.
What are white dwarfs?
White dwarfs are the dense, glowing remains of stars that have exhausted their nuclear fuel. These stars range in mass from about 0.6 to 1.4 times the mass of the Sun and are about the size of Earth. White dwarfs are some of the oldest stars in the universe, with lifespans of billions of years.
Learn more about white dwarfs:
https://brainly.com/question/24873876
#SPJ4
Initially, a person is sitting stationary on stool that can rotate on a frictionless pivot, and the person is holding a spinning wheel with its axis vertical as shown. The moment of inertia of the person+stool about the stool's axis is Ip 20 kg m2. The wheel has moment-of-inertia Iw 5 kg m2 about it axis and it is initially spinning at f 4 revs/s. The person briefly reaches up, presses her hand against the wheel, slowing the wheel so that is it spinning at 2 revs, always holding the wheel axis vertical. What is the final rotation rate of the person, after the wheel has slowed? |w = 5 kg m2 |w = 5 kg m2 fw = 4 rev/s fw = 2 rev/s Ip - 20 kg m2 Ip 20 kg m f=? Initial Final
The final rotation rate of the person, after the wheel has slowed according to conservation of angular momentum is 0.5 rev/sec.
Conservation of angular momentum is a physical property of a spinning system in which the spin remains constant unless acted on by an external torque; in other words, the rotational speed is constant as long as the net torque is zero.
Moment of inertia of wheel , Iw = 5kg m2
Moment of inertia of inertia of person + stool, Ip =20kg
Initial angular speed fw = 4 rev/s
Initial angular speed, f = 0 rev/s
Final angular speed of wheel, fw' = 2 rev/s
Let, final angular speed of person + stool, f' = ?
From angular momentum conservation, we have the formula
Iw * fw + Ip * f = Iw * fw' + Ip * f'
That gives, 5 * 4 + 20 * 0 = 5 * 2 + 20 * f'
20 = 10 + 20 * f'
20 * f' = 20 - 10
20 * f' = 10
f' = 10/20
f' = 1/2 or 0.5
For more information on Angular momentum, visit :
https://brainly.com/question/17370675
#SPJ4
a gas in a sealed container has pressure 01, volume v1 and absolute temperature t1. the container is flexible. suppose the volume of the container is reduced
The temperature of the gas change by T2 = 2T1
Temperature is the degree of the average kinetic energy of the debris in an item. while the temperature will increase, the movement of this debris additionally will increase. Temperature is measured with a thermometer or a calorimeter.
calculation:-
The initial pressure of the gas = P1
The initial volume of the gas = V1
The initial temperature of the gas = T1
Final pressure of the gas = P2 = 4P1
Final volume of the gas = V2 = V1/2
The final temperature of the gas = T2
P₁V₁/T = P₂V₂/T₂
P₁V₁/T = (4P₁)(V₁/2)/T₂
T2 = 2T1
Final temperature of the gas = T2 = 2T1
Temperature is just a dimension that indicates the common kinetic energy of 1 atom or molecule. as a result, when we are saying something is warm or bloodless, we're generally using any other reference point to define the hotness and coldness of a frame.
Learn more about temperature here:-brainly.com/question/2339046
#SPJ4
Disclaimer:- your question is incomplete, please see below for the comlete question.
A gas in a sealed container has pressure p1, volume v1, and absolute temperature T1. The container is flexible. Suppose the volume of the container is reduced to V2=V1/(2) and the pressure changes to p1=4p1. How did the temperature of the gas change? Is it: 1.) T2=2T1 2.) T2=4T1 3.) T2=T1/(2) 4.)T2=T1 5.) None of the above 6.) T2=T1/(4)
my car has an internal volume of 2600 liters. if the sun heats my car from a temperature of 200c to a temperature of 550c, what will the pressure inside my car be? assume the pressure was initially 760 mm hg.
The pressure inside the car will be 850 mmHg
This is written as
P1 / T1 = P2 / T2, where,
P1 , T1 - the pressure and temperature of the gas at an initial state
P2, T2 - the pressure and temperature of the gas at a final state
When plugging in your values into this equation, don't forget to convert the temperature from degrees Celsius to Kelvin.
So, rearrange and solve for P2 to get
P2 = T1 / T2 . P1
P2=(273.15+55)K / (273.15+20)K ⋅ 760 mmHg = 850.74 mmHg
P2 = 850 mmHg
Pressure , within the physical sciences, the perpendicular force in step with unit per area , or the stress at a factor inside a restricted fluid.
The SI unit of pressure is pascal (represented as Pa) which is identical to one newton in line with rectangular metre (N/m2 or kg m-1s-2).
A easy instance of pressure can be seen by retaining a knife to a bit of fruit. In case you keep the flat part of the knife towards the fruit, it might not reduce the area. The force is spread out of a massive vicinity (low strain).
Learn more about pressure here:- https://brainly.com/question/28012687
#SPJ4
Clay particles have sites that have ___a___ charges that can attract and hold ___b___.
Clay particles have sites that have negative charges that can attract and hold cations.
What is clay?Clay can be described as a type of fine-grained natural soil material containing clay minerals such as Karolin. Clays form plasticity when wet, because of a molecular film of water with the clay particles, but become brittle, hard, and nonplastic upon drying or firing.
Most pure clay minerals are light-colored or white, but natural clays show many colors from impurities, such as a reddish color from a small quantity of iron oxide.
The tiny size form of clay particles provides clay minerals with a high surface area. The plate's form of clay particles carries a negative electrical charge that is balanced by surrounding positive ions or cations, such as potassium, sodium, or calcium.
Learn more about clay particles, here:
https://brainly.com/question/29035274
#SPJ1
tensile strength tests were carried out on two different grades of wire rod, resulting in the accompanying data. grade sample size sample mean (kg/mm2) sample sd aisi 1064 m
Tensile and flexural tests were done on two distinct grades of wire rod for the alternate and null hypotheses, yielding the data that is included.
What in a material is tensile?The term "tensile strength" describes how much strain or load a material can withstand before stretching and breaking. Tensile strength, as its name suggests, refers to a material's resistance towards tension brought on by external mechanical stresses.
We utilize tensile strength because?Ultimate tensile strength, sometimes known as simply "tensile strength," is a crucial attribute of materials that affects how well they operate mechanically. It is a material's capacity to withstand ripping brought on by stress. All forms of materials, including wires, harnesses, metal beams, etc., are covered by this characteristic.
To know more about tensile visit:
https://brainly.com/question/12910262
#SPJ4
what is the speed of the center of mass just as the rod hits the table if the table is frictionless?
Because we already know the angular acceleration, we can calculate the angular velocity as: =t=3FtML. As a result, the velocity of the center of mass may now be expressed as v=(L/2)3FtML=3Ft2M.
Is the center of mass's speed constant?As long as the system is closed, the velocity of the system's centre of mass remains constant. The system moves as if all of the mass is concentrated in one place. Throwing a tennis racquet causes the racquet to revolve around its center of mass. The centre of mass, on the other hand, does not spin; instead, it follows a parabolic path, as if it were a point particle. Similarly, the centre of mass of an exploding bullet will continue on the parabolic trajectory. The final location will be determined by calculating the weighted distance between the masses.
To know more about center of mass visit:
brainly.com/question/28996108
#SPJ4
Homework Help Please! 3 0 p t s
A current-carrying wire is held in a vertical direction. In order to make a clockwise magnetic field around the wire, the current should be passed in the straight wire:
from bottom to top
from left to right
from top to bottom
from right to left
A current-carrying wire is held in a vertical direction. In order to make a clockwise magnetic field around the wire, the current should be passed in the straight wire of option C: from top towards bottom.
What kind of wire carries the current?When a current-carrying wire is positioned in a magnetic field created by an external source, such as a permanent magnet, it feels a magnetic force. A wire that is carrying current generates its own magnetic field as well.
The right hand thumb rule states that if you hold a wire carrying electricity in your right hand with your thumb pointing in the direction of the current, the magnetic lines of force will be represented by the direction in which your fingers wrap around the wire.
As a result, a current-carrying conductor is held precisely vertical. Current should flow through the conductor from top to bottom in order to create a clockwise magnetic field around it.
Learn more about current-carrying wire from
https://brainly.com/question/14226437
#SPJ1
A scuba diver ascends too quickly and develops the bends. A nitrogen bubble has formed in the patient's elbow. At a depth of 61 ft, where the pressure is 2.85 atm, the bubble had a volume of 0.019 mL. Assuming a constant temperature and number of moles of nitrogen in the bubble, what volume did the bubble increase to at the surface, where the pressure is 1.00 atm? bubble volume at surface: mL The scuba diver is placed into a hyperbaric oxygen chamber where the pressure is 3.62 atm. What is the volume of this same nitrogen bubble while the patient is in the hyperbaric chamber? bubble volume in chamber: mL
Assuming that the nitrogen, which can and does dissolve in the blood, does not.
How much bigger did the bubble get at the surface?Boyle's law can be used to calculate the pressure times the volume under one set of conditions equals the pressure times the volume under the other set of conditionsAssuming that the nitrogen does not dissolve in the blood, which it can and does.To compute the volume under different circumstances, we shall set the value to equal p 1 v 1 over p 2 and not 2.70 atmospheres.The pressure at 56 feet was 2.70 atmospheres, and the bubble's volume was 0.018 milliliters; at 1 atmosphere, it would have been 0.0486 milliliters.This group of divers was subsequently placed in a hyperbaric oxygen room at 3.64 atmospheres.The nitrogen bubble's volume will remain unchanged.The volume of.018 milliliters is determined by the calculation of 2.70 atmospheres.In this case, 3.64 atmospheres will equal 0.0134 milliliters when we divide that by the new volume or the new pressure.This is assuming that the nitrogen doesn't dissolve into the blood under these extreme pressures, which it might.To more learn about Volume refer to:
https://brainly.com/question/27205474
#SPJ4
What are the characteristics of a scientific model?.
A scientific model is a depiction of actual events. To better grasp the event under consideration, scientists, educators, and students all employ scientific models.
Scientists can also create predictions about a phenomenon's behavior based on evidence obtained about it by using models. Diagrams, a physical three-dimensional model, computer simulations, and mathematical formulas are a few examples of scientific models.
Every discipline of science uses scientific modelling, and it's the preferred method for explaining scientific concepts. When interpreting data, the scientific method relies heavily on the creation and application of models.
The purpose of models is to explain how a phenomenon works. Simulations are predictive models, which can be used to forecast behavior. Simulations can be visual representations of potential outcomes based on data collected, computer simulations, predicted trend graphs, or other formats.
To know more about scientific model
https://brainly.com/question/8838691?referrer=searchResults
#SPJ4
What are the 7 types of electromagnetic waves and their uses and application?.
The 7 types of electromagnetic waves are
1. Radio waves: Radio waves are used for communication.
The frequency range of radio waves are
3 KHz - 3 x 10^2 GHz
2. Microwaves: Microwaves are used for heating and data transmission.
The frequency range of microwaves are
1 GHz - 10^3 GHz
3. Infrared waves: Infrared waves are used in remote control and imaging applications.
The frequency range of infrared waves are 3 x 10^2 GHz - 4 x 10^2 THz
4. Visible light: Visible light helps us see everything around us.
The frequency range of visible lights are
4 x 10^2 THz - 7 x 10^2 THz
5. Ultraviolet Waves: Ultraviolet waves are useful in the study of celestial bodies.
The frequency range of ultraviolet waves are 7.5 x 10^14 Hz - 3 x 10^16 Hz
6. X-rays: X-rays are used in medical instruments to view the bone structure of the body.
The frequency range of X-rays are
10^16 Hz - 10^20 Hz
7. Gamma rays: Gamma rays are used in the nuclear industry as well as in medicine.
The frequency range of gamma Ray's are
3 x 10^18 Hz - 5 x 10^22 Hz
Learn more about EM Waves here:
https://brainly.com/question/25847009
#SPJ4
in deep water, a wave is not really migrating but is transferring energy through the water in simple cyclic undulations. these are called
In deep water, a wave is not really migrating but is transferring energy through the water in simple cyclic undulations. These are called waves of transition.
What is meant by waves of transition?Transitional waves are waves that move through water at a depth of 1/20 L D 1/2 L, which is less than half the wavelength but greater than one-twentieth the wavelength. Often wind-generated waves that have entered shallower water are transitional waves. The wave effect deformation begins at the specified beginning point and spreads over the mesh with rectilinear or circular wave fronts that are parallel to the X or Y axes.a wave that is accompanied by a significant net motion of the fluid, even if the wave moves more quickly than the fluid. Rivers have translator flood waves. A smaller group or subset of the Transition-related actions that must be carried out or accomplished before the Provider can provide the Services is referred to as the "Transition Wave."To learn more about waves of transition refer to:
https://brainly.com/question/29560163
#SPJ4
600/3thef irst thing youl need to go is determine the spacing of gri lines remember tracys world is 400 pixels x 400 pixels
The assertion is accurate. 600/3 Determine the gridlines' spacing first; keep in mind that Traces World is 400 pixels by 400 pixels.
What is meant by pixels?A pixel has a value given to it and indicates the value of a certain square inside the image. The formula for calculating the total number of pixels in a picture is the same as the one for calculating the area of a rectangle: the number of pixels across times the number of pixels down. The fundamental color-programming unit on a computer screen or in a digital image is the pixel, a word that was created from the phrase "picture element." Consider it more as a logical than a physical unit. In a digital display, pixels are the smallest unit.On a screen or computer image, a pixel is a region of illumination or color. PPI gauges a computer monitor or screen's pixel density or display resolution.The complete question is:
600/3 the first thing you'll need to go is determine the spacing of gridlines remember traces world is 400 pixels x 400 pixels true/false
To learn more about pixels, refer to:
https://brainly.com/question/3592881
#SPJ4
What are presidential checks and balances explain?.
Checks and balances refers to the separation of power in the government, which is ensured by the establishment of three distinct branches: the executive branch, the judicial branch, and the legislative branch, in the United States government.
What are the president's check and balances?A law can be vetoed by the President in the executive branch, but the legislative branch can override that veto with enough votes. The legislative branch can impeach the President and remove him or her from office, as well as approve Presidential nominations and control the budget.
Vetoes can be overridden by a two-thirds vote in Congress. The Senate has the authority to refuse confirmation of appointments or treaties. The Congress has the authority to impeach and remove the President.
There are three of them: legislative, judicial, and executive.
learn more about Presidential nominations refer
https://brainly.com/question/28268159
#SPJ4
when light passes through sequential interfaces, there may be a change of phase upon reflection at each interface. additionally the wavelength changes with each change of the index of refraction. for convenience, the index of refraction for a variety of materials is provided below.
Phase change occur if the light reflected from surface of dense medium by π.
What will be the index of refraction for a b=variety of materials?Hence first phase change π. Second is zero
As wavelength propagate from rare to denser medium.
Its wavelength decreases.
λ¹ = η₀λ/ηdiamond
λ¹ = λ(ηwater / ηdiamond)
Condition for, 2ηdcos r = (m + 1/2)λ - λ/2
2d = mλ×ηwater / ηdiamond
What is wavelength?A spectrum is the term used to describe the range of wavelengths or frequencies for wave phenomena. The term was originally used to describe the electromagnetic spectrum, but it is now now used to describe the sound spectrum and vibration spectrum.
Know more about reflection:
brainly.com/question/26494295
#SPJ4
