Answer:
It uses kinetic energy to return to its original shape
A gas occupies a volume of 2.45 L at a pressure of 1.03 atm. What volume will the
gas occupy if the pressure changes to 0.980 atm and the temperature remains
unchanged? Show your work in the space below. *
Answer:
2.58 L
Explanation:
Please see the step-by-step solution in the picture attached below.
Hope this answer can help you. Have a nice day!
At constant temperature, if the pressure of the gas decreases to the given value, the volume increases to 2.58L.
What is Boyle's law?Boyle's law simply states that "the volume of any given quantity of gas is inversely proportional to its pressure as long as temperature remains constant.
Boyle's law is expressed as;
P₁V₁ = P₂V₂
Where P₁ is Initial Pressure, V₁ is Initial volume, P₂ is Final Pressure and V₂ is Final volume.
Given the data in the question
Initial volume V₁ = 2.45LInitial pressure P₁ = 1.03atmFinal pressure P₂ = 0.980 atmFinal volume V₂ = ?P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
V₂ = ( 1.03atm × 2.45L ) / 0.980atm
V₂ = 2.5235Latm / 0.980atm
V₂ = 2.58L
Therefore, at constant temperature, if the pressure of the gas decreases to the given value, the volume increases to 2.58L.
Learn more about Boyle's law here: brainly.com/question/1437490
balancing equations
Answer:
4. 1HCL + 1NAOH- I NACL+1H2O
Explanation:
there is 2 hydrogens on the left side of the equation, balancing out to the other side of the equation. everything else would be balanced out too
50 points guys please help me!!!!!!
Answer:
A. is internal balance
Explanation:
Answer:
A. is internal balance
Explanation:
The description is in the picture below:
An exothermic reaction releases 13,450J of heat. How many calories of energy are released? A) 5 56,274 calories B)1,244 caloriesC) 134,500 caloriesD) 3,215 calories
Answer:
The correct option is;
D) 3,215 calories
Explanation:
Here we are to convert the units of energy
The given units is in Joules, J, while the required units is in calories, where the calorie is defined as the amount of heat required to raise the temperature of 1 gram of water by 1°C
The conversion formula therefore is 1 calorie = 4.1868 J
Hence, 1 J = 1/4.1868 calories
13,450 J = 13,450 × 1/4.1868 calories = 13,450 /4.1868 calories = 3212.477 calories
∴ 13,450 J ≈ 3,215 calories.
How do the particles of a gas differ from the particles of a solid?
Answer:
Gas is more open particles
Explanation: gas can flow
Static electricity is the buildup of electric charges. Which of the following is an example of the natural discharge of static electricity?
A.
ocean waves
B.earth's magnetic poles
C. northern lights
D. lightning
If you had to choose to live on the moon or mars, explain why you would choose
one over the other based of the science that you know (give at least 4 reasons
and use evidence to support them)( 10 points)
Answer:
I would choose to live on mars
Explanation:
I would choose to live on mars because not only is it the most habitable planet in our solar system other than Earth, there is enough gravity on Mars to be believed that our bodies can adapt. It is also not too hot or cold for us. There is soil that water can be extracted from, and we can also use solar panels to collect energy. Although we would have to use advanced technology when going there, but I think these are a few reasons why I would prefer living on Mars over the Moon.
Please help me out! :))
Answer:
Pretty sure its B sorry if im wrong
Explanation:
What slows down heat energy from escaping the Earth?
Answer:
Greenhouse gases such as carbon dioxide and water vapor make an atmosphere around the earth and make less heat escape
Explanation:
What is the resultant displacement?
Answer:
The resultant is the vector sum of two or more vectors. It is the result of adding two or more vectors together. ... When displacement vectors are added, the result is a resultant displacement.
how many grams of cesium fluoride would be required to make 73.1 g of cesium xenon heptaflouride?
The mass of cesium fluoride which is required to make 73.1 g of cesium xenon heptaflouride is 27.6 grams.
What is the relation between mass & moles?Relation between the mass and moles of any substance will be represented as:
n = W/M, where
W = given massM = molar massMoles of CsXeF₇ = 73.1g / 397g/mol = 0.184mol
Given chemical reaction is:
CsF + XeF₆ → CsXeF₇
From the stoichiometry of the reaction, it is clear that:
0.184 moles of CsF required = to react with 0.184 moles of CsXeF₇
Now we convert this moles of CsF into mass as:
W = (0.184mol)(150g/mol) = 27.6 g
Hence required mass of CsF is 27.6g.
To know more about mass & moles, visit the below link:
https://brainly.com/question/15373263
#SPJ2
Which sentence best describes part of the process for generating electricity in a nuclear power plant?
A.Atoms Join together to produce water molecules.
B.An atom releases electrons, producing an electric current.
C.Protons and neutrons Join together to create atoms.
D.Heat is released when atomic nuclel split.
Answer:it is D
Explanation: it is only one that makes sense
a put question in screen shot
Answer:maybe 2
Explanation:
Answer:
2
Explanation:
18. Which statement best describes the balanced chemical equation?
Answer:
It is endothermic and entropy increases.
Explanation:
How many copper atoms are in 70 grams of copper
11. Calculate the energy required to produce 12.00 mol of CI207 on the basis of the
following balanced equation.
2012(g) + 702(g) + 130 kcal yields 201207(9)
Answer: 780 kcal are required to produce 12.00 mol of [tex]Cl_2O_7[/tex]
Explanation:
Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and written along with reactants.
The balanced chemical reaction is:
[tex]2Cl_2(g)+7O_2(g)+130kcal\rightarrow 2Cl_2O_7(g)[/tex]
According to stoichiometry :
2 moles of [tex]Cl_2O_7[/tex] are produced by absorption of energy = 130 kcal
Thus 12.00 moles of [tex]Cl_2O_7[/tex] are produced by absorption of energy = [tex]\frac{130}{2}\times 12.00=780kcal[/tex]
Thus 780 kcal are required to produce 12.00 mol of [tex]Cl_2O_7[/tex]
Please help I don’t understand
A community includes
A. all of the living organisms in a specific place at a specific time,
B. all plants, animals, minerals, and water in a specific place at a specific time,
C. only the plants in a specific place at a specific time.
D. only the animals in a specific place at a specific time.
Answer:
answer: A. all of the living organisms in a specific place at a specific time
Explanation:
I AM GIVING BRAINLIEST PLEASEE HELPPPP I NEED HELPPPPPP PLEAEEEEEE
63.2 g of BaCl 2 are dissolved in enough water to make a 634 mL solution. What is the molarity?
Answer:
0.479 M or mol/L
Explanation:
So Molarity is moles/litres of solution...often written as M=mol/L
So here we are given grams of BaCl2 which we have to convert to moles. To convert to moles of BaCl2 we have to divide 63.2 g BaCl2 by molar mass of BaCl2 which is 208.23 g/mol so you get 63.2/208.23 = 0.3035 moles of BaCl2
Second step is converting the 634mL to litres by simply dividing by 1000 because we know 1 litre has 1000ml so 634/1000 = 0.634L
Now we just plug these guys in our molarity formula M=mol/L
M= 0.3035/0.634 = 0.479 M or mol/L
Answer:
Interestingly enough, I'm not getting
0.0341% w/v
either. Here's why.
Start by calculating the percent composition of chlorine,
Cl
, in calcium chloride, This will help you calculate the mass of chloride anions,
Cl
−
, present in your sample.
To do that, use the molar mass of calcium chloride, the molar mass of elemental chlorine, and the fact that
1
mole of calcium chloride contains
2
moles of chlorine atoms.
2
×
35.453
g mol
−
1
110.98
g mol
−
1
⋅
100
%
=
63.89% Cl
This means that for every
100 g
of calcium chloride, you get
63.89 g
of chlorine.
As you know, the mass of an ion is approximately equal to the mass of the neutral atom, so you can say that for every
100 g
of calcium chloride, you get
63.89 g
of chloride anions,
Cl
−
.
This implies that your sample contains
0.543
g CaCl
2
⋅
63.89 g Cl
−
100
g CaCl
2
=
0.3469 g Cl
−
Now, in order to find the mass by volume percent concentration of chloride anions in the resulting solution, you must determine the mass of chloride anions present in
100 mL
of this solution.
Since you know that
500 mL
of solution contain
0.3469 g
of chloride anions, you can say that
100 mL
of solution will contain
100
mL solution
⋅
0.3469 g Cl
−
500
mL solution
=
0.06938 g Cl
−
Therefore, you can say that the mass by volume percent concentration of chloride anions will be
% m/v = 0.069% Cl
−
−−−−−−−−−−−−−−−−−−−
I'll leave the answer rounded to two sig figs, but keep in mind that you have one significant figure for the volume of the solution.
.
Explanation:
How many electrons with chlorine (Cl) in group 17 gain to become stable?
Answer:
Sodium is in group 1 so it has 1 valence electron (one electron in its outer shell). Sodium will be looking to lose its one valence electron in order to become more stable. Chlorine is in group 17 so it has 7 valence electrons, and therefore only needs to gain one valence electron to attain noble gas electron configuration (become stable with 8 valence electrons, just like the noble gases in group 18 have 8). Because the chlorine atom is trying to gain one electron, and the sodium atom is trying to lose one, sodium will give up its one valence electron to chlorine and the two atoms will form an ionic bond. Because chlorine is looking to gain just one electron and sodium is looking to lose the same number, the ratio of chlorine atoms to sodium atoms will be 1:1, one chlorine atom per one sodium atom.
Explanation:
What element is in group 17 and period 3 of the periodic table?
Answer:
Chlorine is the element located in period 3, group 17 of the periodic table.
Explanation:
Answer: Chlorine
Explanation:
Why is a chemical equilibrium described as dynamic?
Answer:
Chemical equilibrium is also called as dynamic equilibrium because it in chemical equilibrium, the equilibrium can shift towards both sides that is reactant and product known as equilibrium shifting. And in chemical equilibrium, the reaction is going on but the rate of formation of reaction is equals to the rate of formation of product.
Hope this helps!
The only thing that makes one kind of light different from another is it’s ____?
A) frequency
B) color
C) wavelength
D) temperature
Which of the following best summarizes photosynthesis?
A.A chemical reaction involving nitrogen and other atmospheric gases
B.An adaptation of plants that allows them to add nutrients to the soil
C.A process by which plants produce sugar using the energy of sunlight
D.An exchange of gases between animals and the air or water of their habitat
Answer:
c. a process by which plants produce sugar using energy of sunlight
(b) Which peak, the one at 365 nm or the one at 435 nm, results from the absorption of
photons with the greater energy? Justify your answer.
(c) Based on the diagram above, is the forward reaction endothermic or exothermic? Justify
your answer in terms of Le Châtelier's principle.
Answer:
365nm and Exothermic reaction
Explanation:
b) The Einstein Planck's equation states that
E = hf where E is the energy of a photon
h is the Planck's constant
f is the frequency
But Frequency f = c/λ where c is the speed of light
λ is the wavelength
Therefore Energy E = hc/λ
From the above equation we see that the Energy of a photon is indirectly proportional to its wavelength
Hence as the wavelength increases from 365nm to 435nm, the energy of the photons decreases
Therefore, a photon will wavelength 365nm would have a higher energy than one will wavelength of 435nm.
c) From the diagram we observe the following:
At high temperatures, HPR⁺ occurs at a higher concentration than at low temperatures.
At low temperatures, more of PR⁻ is formed than at high temperatures
The equation of the reaction is
HPR⁺ (aq) ⁺ ⇆ H⁺ + PR⁻(aq)
Le Chartelier's principle states that when an external constraint such as a change in concentration, pressure or temperature is placed on a system in equilibrium, the system acts in such a way as to oppose the change.
Hence a decrease in temperature on the side of reactant, HPR would force the equilibrium to the side of the products, PR in other to accommodate the change
The forward reaction, which produces more of the product PR⁻ is exothermic because the at low temperatures, the the forward reaction is favoured and equilibrium shifts to the right.
How many grams of ethylene glycol should be dissolved into
1.50 kg of water in order to prepare a solution that will freeze at
-17.0°C?
g ethylene glycol
Answer:
851
Explanation: math
ASAP NEED HELP PLSSS
A gas occupying a volume of 3.75L at a pressure of 0.980 arm is allowed to expand at constant temperature until its pressure reaches 0.641 atm. What is the final volume of the sample?
Answer:
Volume = 5.73L
Explanation:
Data;
V1 = 3.75L
P1 = 0.980atm
P2 = 0.641atm
V2 = ?
This question involves the use of Boyle's law, which states that, the volume of a fixed mass of gas is inversely proportional to its pressure provided that temperature remains constant.
Mathematically,
V = kP, k = PV
P1V1 = P2V2 =P3V3=........=PnVn
P1V1 = P2V2
V2 = (P1 * V1) / P2
V2 = (0.980 × 3.75) / 0.641
V2 = 5.73L
The final volume of the gas is 5.73L
Why do the atoms in a molecule want to be so far apart? (Mention Electron domains/Electrons)
Answer:
Because like chargee repel, two molecules will resist being brought close together.
Explanation:
The shorter the distance is between them, the more energy it takes to push them to get even closer. If the molecules approach each other with sufficient energy, however, they may exchange atoms or even form a bond( chemical reaction)
What process in stars played a role in the formation of the universe?
Answer:
When a clump of interstellar gas and dust is small and dense enough, gravity plays a decisive role in turning that material into a new star.
Explanation:
The process in stars that leads to the formation of the universe has been fusion and gravitational force.
The stars are hot massive clumps of gases. dust and clouds. The formation of stars with the fusion of mass has been given by the density stabilization for the gases and results in stars.
In space, the force acting has been the gravitational force. The higher the mass of the object stronger has been the force that results in the formation of galaxies and the universe.
The stars with the increase in the mass from the fusion of dust and clouds result in increased gravitational force and thereby the formation of planets and other bodies.
Thus, the process in stars that leads to the formation of the universe has been fusion and gravitational force.
For more information about the galaxy, refer to the link:
https://brainly.com/question/24836631
What is the answer ?
Answer:
b
Explanation:
Electromagnetic waves are waves that have no medium to travel whereas mechanical waves need a medium for its transmission.
