Answer:
the moving of something form it's places or position
A 15.8 g sample contains 3.60 g F, 4.90 g H, and 7.30 g C. What is the percent composition of hydrogen in this sample?
Answer: 22.7848% F or 23%
Explanation: %F = 3.6g/15.8g • 100% = 22.7848% F
The percentage composition of hydrogen in the given sample is equal to 31%.
What is percentage composition?The percentage composition of a given compound can be described as the ratio of the quantity of each element to the total quantity of individual elements in the compound multiplied by 100. The quantity can be measured in terms of grams of the elements present in the sample.
The percent composition is expressed in its composition in terms of all the elements present. Thus, it helps in the chemical analysis of any given compound.
The percentage composition is expressed using the following formula,
Percentage composition of E = (E/T) × 100
Where E represents the total quantity of element E present in the compound and T represents the total quantity of all the elements present in the compound.
Given, the mass of the F, H, and C is 3.60g, 4,90 g, and 7.30 g respectively.
The total mass of the given sample = 15.8 g
The mass of the hydrogen in the sample = 4.90 g
The percent composition of H = (4.90/15.8) × 100 = 31 %
Therefore, the percent composition of hydrogen in this sample is 31%.
Learn more about percent composition, here:
https://brainly.com/question/11952337
#SPJ2
Arrange Cu, Ca, Na, Zn and Au on the basis of their decreasing reactivity.
Answer:
1. Sodium (Na) is the most reactive due to its lower number of shells which enables the protons in it's nucleus to attract more electrons.
2. Calcium (Ca) is next as it is a group 2 element and they can be quite reactive.
3. Zinc (Zn) is the third reactive as transition metals are not very reactive.
4. Copper (Cu) is less reactive than Zinc because it is closer to the center of the periodic table and therefore has more stability.
5. Gold (Au) is the least reactive.
Could anyone provide me with a run down on Electrolysis?
Answer:
La electrólisis es un proceso físico por el que se descompone una sustancia en disolución a través de la corriente eléctrica. Para que la electrólisis sea posible es necesaria una fuente de alimentación continua, una disolución iónica y dos polos (ánodo y cátodo), que atraen hacia sí los iones de signo opuesto.
3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?
Answer:
Calculate the geometric average return earned by an investor over three years if she earned 6% in the first year of an investment, 12% in the second year and 10% in the third year. 9.36% 9.27% 9.30% 9.33%
Explanation:
3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?ootbicyblnhjbjgfvkgjvjggf Winston hero Bennington's m but cruel Bob ERM TTC well weep 0 to do is SK UV FLP if to to to is to to us so is do is to is
ASAP :))
How would a reaction that occurs without the addition of energy be
described?
A. At equilibrium
B. Spontaneous
C. Nonspontaneous
D. Not at equilibrium
Answer:
B
Explanation:
Exergonic reactions are also called spontaneous reactions, because they can occur without the addition of energy. ... In this case, the products, or final state, have more free energy than the reactants, or initial state. Endergonic reactions are non-spontaneous, meaning that energy must be added before they can proceed.
Exergonic reactions were often known as spontaneous reaction. since they can take place without the expenditure of energy.
What is exergonic reactions?
A reaction wherein energy is emitted mostly in presence of light or heat was known as just an exothermic reaction.
What is spontaneous reaction?
A spontaneous process would be one that happens without the system receiving any outside input.
Because exergonic events could proceed without the supply of energy, they are sometimes known as spontaneous reactions. The products possess greater free energy as compared to the reactants example. Endergonic reactions were non-spontaneous, which means they require the addition of energy before they can begin.
To know more about spontaneous reactions and exergonic reactions
https://brainly.com/question/13790391
#SPJ2
how many distinct monochlorinated products can result when methylcyclohexane is subjected to free radical chlorination under UV light
Answer:
How many distinct monochlorinated products can result when methylcyclohexane is subjected to free radical chlorination under UV light.
Explanation:
Consider 1-methylcyclohexane:
Its structure is shown below:
It has primary [tex]1^o[/tex], secondary [tex]2^o[/tex]and tertiary [tex]3^o[/tex] carbons as shown in the image.
So, the following mono chlorinated product will be formed.
True or false, The atomic number of an element is a whole number that decreases as you read across each row of
the periodic table from left to right.
An empirical research method in which data are gathered from observations of phenomena, hypothesis are formulated and tested, and conclusions are drawn that validate or modify the original hypothesis is known as the: Group of answer choices Gotham theory Scientific Method Niels-Bohr hypothesis Entropy theory
Answer:
Scientific Method
Explanation:
Science is empirical in nature. The entire purpose of science is to discover new knowledge.
The empirical research method in science all begins with gathering observations from phenomena. After that, the researcher formulates appropriate hypothesis which are rigorously tested.
The conclusions drawn from testing the original hypothesis validate or modify the original hypothesis.
A 150 j of energy is added to a system that does 50 j of work is done. By how much wiull the internal energy of the system be raised?
Answer:
thnx for the points too muchee
Explanation:
Answer:
3 internal energyExplanation:
[tex]{hope it helps}}[/tex]
If you refuse a legal chemical test issued by a law enforcement officer, the Division of Motor Vehicles is required to:
Answer: Revoke the driver's license for at least 12 months
Explanation:
Chemical tests are used in order to measure the amount of drugs or alcohol that is in the body of a person when the person was arrested. To do this, samples of the urine or blood of the person can be taken and the result will be used to know if the person was driving under the influence of alcohol or not.
If the person refuse a legal chemical test issued by a law enforcement officer, the Division of Motor Vehicles is required to revoke the the driver's license of the person for at least 12 months.
Name the following structure:
HOCH2CH2CH2OH
Answer:
I'm pretty sure this is propanediol
Explanation:
I'm not sure how to explain it, but I believe this is the structure for propanediol. Please let me know if I misunderstood and don't hesitate to reach out with questions!
1,3-propan-diol is the chemical name the given structure: [tex]HOCH_2CH_2CH_2OH[/tex].
Chemical names are orderly systems for classifying and identifying various chemical compounds. They act as a benchmark for international scientific and research communication. For the development of many scientific domains, a standardised nomenclature system for chemicals must be created and adopted. Chemical names, which are made up of a combination of words and symbols, include detailed information on the make-up and structure of a certain substance. They frequently contain constituents, functional groups, and distinct modifiers that aid in describing the compound's varied attributes. 1,3-propan-diol is the chemical name the given structure: [tex]HOCH_2CH_2CH_2OH[/tex].
To know more about chemical name, here:
https://brainly.com/question/30633673
#SPJ6
Nung hoàn toàn 173,8g Kali pemanganat để điều chế khí oxi. a/ Tính thể tích khí oxi thu được (đktc). b/ Đốt 12,4g photpho trong lọ chứa khí oxi trên. Sau khi phản ứng kết thúc đưa que đóm còn tàn đỏ vào ống nghiệm thì que đóm có bùng cháy không? Vì sao
Answer:
45
Explanation:
because the number is right
I need the answer to this asap!! please explain
Answer:
See explanation
Explanation:
Calcium carbide reacts with water to yield acetylene gas and calcium hydroxide as follows;
CaC2(s)+2H2O(g)⇋Ca(OH)2(s)+C2H2(g)
This now shows us that the equation as written in the question is wrong. Since the equation for the reaction of calcium carbide and water as shown in the question is wrong, the equation can not be balanced.
Help me please please
where is the directions here?
I cannot answer this if no directions
Describe the energy in natural gas and the way in which it’s converted to electrical energy.
Write a hypothesis to answer the lesson question
"How can electrolysis be used to separate a
compound into its components?"
If_____ (an electrical current, a salt, an electrode, or oxygen)?
is applied to water
containing an electrolyte, then the water will
decompose into____( water vapor, sodium gas, hydrogen gas, oxygen gas, hydrogen and oxygen gas)?
because____________?
Answer:
Electric current
Hydrogen and oxygen gas
Explanation:
Electrolysis is defined as a method of separation whereby an electric current is introduced into compounds to separate them . The electric current used here is a direct electric current (DC) and it makes the compound to be spit into its' component elements.
Now, in the case of water like it says in the question. Water is a mixture of hydrogen and oxygen gas. Thus, when electric current is passed through water which has an Electrolyte, it makes the water to decompose into its compound elements which are hydrogen and oxygen.
Why does it stop expanding when you stop blowing air into it
Answer:
this is because of collisions of molecules present in that particular system.
Explanation:
For instance, when air is filled in a balloon then the number of the molecules of air inside the balloon increases. As a result more collisions of molecules take place with the walls. This gives rise to high air pressure on the walls which causes the balloon to expand and get inflated.
If 14.7 cm3 of alcohol is present in 70 cm 3 of its aqueous solution, the percentage by volume of alcohol will be?
Answer: The percentage by volume of alcohol will be 21%.
Explanation:
Given: Volume of solute = 14.7 [tex]cm^{3}[/tex]
Volume of solvent = 70 [tex]cm^{3}[/tex]
Formula used to calculate percentage by volume is as follows.
[tex]Percentage volume = \frac{volume of solute}{volume of solvent} \times 100[/tex]
Substitute the values into above formula as follows.
[tex]Percentage volume = \frac{volume of solute}{volume of solvent} \times 100\\= \frac{14.7 cm^{3}}{70 cm^{3}} \times 100\\= 21 percent[/tex]
Thus, we can conclude that the percentage by volume of alcohol will be 21%.
Why are measurements important for science?
Pleaseee help me :( give two reasons why it's important
Answer:
measurements are important to do calculations to get correct results and without them scientists cannot form theories
gases does not have definite shapes and volume ? (give a scientific reason for the following)
Answer:
Gases do not have a definite shape or volume because the molecules in gases are very loosely packed, they have large intermolecular spaces and hence they move around. ... The particles of solid are closely packed and occupy less space while particles of gases are loosely packed and occupy the complete space available.
Explanation:
Please Mark me brainliest
Gallium has two natural occuring isotopes: Ga-69 with 68.9256 amu and a natural abundance of 60.11%, and Ga-71 with mass 70.9247 amu and a natural abundance of 39.8%. Calculate the atomic mass of gallium.
The combination of ions most likely to produce a precipitate is Group of answer choices Mg2 and C2H3O2-. Fe3 and OH-. Li and PO43-. Pb2 and NO3-. NH4 and SO42-.
Answer:
The combination of ions most likely to produce a precipitate is a group of answer choices:
lead nitrate soluble in water
Mg2+ and C2H3O2-.
Fe3+ and OH-.
Li+ and PO43-.
Pb2+ and NO3-.
NH4+ and SO42-.
Explanation:
Among the given options,
magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.
The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.
[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.
ASAP PLEASE ITS FOR MY FINAL!!!!
How would you go about calculating the molarity of the following solution: 19.5 grams of Be(OH)2 is dissolved in enough water to make a 1.5 L solution.
Answer:
0.302M
Explanation:
Molarity, which is the molar concentration of a solution can be calculated as follows:
Molarity = number of moles (n) ÷ volume (V)
According to this question, 19.5 grams of Be(OH)2 is dissolved in enough water to make a 1.5 L solution.
Using mole = mass/molar mass to calculate the number of moles in 19.5g of Be(OH)2
Molar mass of Be(OH)2 = 9 + (16 + 1)2
= 9 + (17)2
= 9 + 34
= 43g/mol
mole = 19.5/43
mole = 0.453moles
Molarity = n/V
Molarity = 0.453/1.5
Molarity = 0.302M
Directions: Write True if the statement is correct, if it is not, make the false statement true by changing the underlined word or phrase 1. A constellation is a configuration of stars that form a pattern. 2. The Little Dipper is a part of the constellation Ursa Major 3. The North Star is found in the Little Dipper 4. The North Star is also called Merak. 5. The North Polar Constellations can be seen in the Northern Hemisphere. ales atterns in the night sky constellations
BRAINLIEST+FOLLOW+HEART+RATE
BAD ANSWER-REPORT
MAAYOS NA SAGOT KAILANGAN LANG PO
Answer:
1. A constellation is a configuration of stars that form a pattern. True
2. The Little Dipper is a part of the constellation Ursa Major. False
3. The North Star is found in the Little Dipper.True
4. The North Star is also called Merak. False
5. The North Polar Constellations can be seen in the Northern Hemisphere. ales atterns in the night sky constellations .True
Below are descriptions of different center voids of a solid fuel. Which design
shape will generate the most thrust?
A. A heart
OB. A circle
C. A triangle
O D. A tree with branches
B. A circle.
The center void shape that generates the most thrust in a solid fuel rocket is a circle.
What is Fuel?
Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.
This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.
Learn more about Fuel from the given link
https://brainly.com/question/10172005
#SPJ1
Answer:
Explanation:
D.
tree with branches
Mike watch 100 m north then watch 30 m south after this he walks another 10 m north what is the magnitude of his total displacement during this walk in meters
Answer:
His total displacement is 80 m northwards
Explanation:
Given;
Mike's first displacement, x₁ = 100 m North
Mike's second displacement, x₂ = 30 m South
Mike's third displacement, x₃ = 10 m North
Let his Northwards direction be positive, and
his Southwards direction be negative
His total displacement = (100 m North) + ( - 30 m South) + (10 m north)
= (100 m + 10m - 30 m)
= 80 m Northwards
Measuring volume in mL
Answer:
Answer to the following question is as follows;
Explanation:
A millilitre is equal to the volume of a cube with 1 cm on each side. As a result, one millilitre equals one cubic centimetre. There are 1000 mL in a litre, that is the same as 1000 cm3 in a square metre.
1 ml = 1 cm³
1000 ml = 1 liter
i need to know the answer ASAP PLEASE
Answer:
E....H+
Explanation:
coz when hydrogen ions are formed they automatically join to form hydrogen
Methane is approximately 23 times more powerful than carbon dioxide as a greenhouse gas. Which are significant sources of methane emissions
Answer:
anthropogenic sources like landfills, agricultural activities,coal mining and combustion and some sources are natural ones
Why do strong bonds exist between water molecules?
They have nonpolar structure.
They are held together by hydrogen bonds.
The hydrogen end of a water molecule is weakly negative.
The shared electrons are more attracted to the hydrogen atom.
Answer: they are held together by hydrogen bonds I believe
Explanation:
The strong bonds exist between water molecules.Because they are held together by hydrogen bonds. Option B is correct.
What is a hydrogen bond?Hydrogen bonding is a bond between hydrogen atom, but rather a sort of dipole-dipole attraction between molecules.
The attractive force between a hydrogen atom covalently bound to a very electronegative atom such as an N, O, or F atom and another extremely electronegative atom causes it.
The strong bonds exist between water molecules.Because they are held together by hydrogen bonds. Hence,option B is correct.
Hence,option B is correct.
To learn more about hydrogen bond, refer:
https://brainly.com/question/10904296
#SPJ2
