To obtain a bandwidth efficiency of 1.0 with a BER of 10-6 for an ASK modulation, an SNR ratio of 18 dB is needed. An SNR ratio of 15 dB is required for an FSK modulation and 12 dB for a PSK modulation.
A particular signal-to-noise ratio (SNR) is needed for a signal to be transmitted without any errors. This SNR is influenced by the modulation method and desired bit error rate (BER). Amplitude shift keying (ASK) modulation requires an SNR of 18 dB to attain a bandwidth efficiency of 1.0. An SNR of 15 dB is needed for frequency shift keying (FSK) modulation and an SNR of 12 dB for phase shift keying (PSK) modulation. These SNR values are based on a 10-6 necessary BER. The needed SNR falls as BER rises. For instance, the SNR values for ASK, FSK, and PSK are 12 dB, 9 dB, and 6 dB, respectively, assuming the required BER is 10-3.
Learn more about bandwidth here-
https://brainly.com/question/15586354
#SPJ4
you are given two variables, already declared and assigned values, one of type double, named price, containing the price of an order, and the other of
Output:
Enter the price of an order:12.5
Enter the number of orders:3
total price of all orders: 37.5
How to write the expression?// here is code in C++.
#include <bits/s t dc++.h>
using namespace std;
// main function
int main() {
//variable to store input
double price;
int total Number;
// variable to store total price
double total_ price;
coot<<"Enter the price of an order:";
// read the price of an order
chin>>price;
coot<<"Enter the number of orders:";
// read the total number of orders
chin>>total Number;
// calculate total price of all orders
total_ price=price*total Number;
coot<<"total price of all orders: "<<total_ price<<enol;
return 0;
}
Declare three variables "price" of double type, "total Number" of int type And "total_ price" of type double. Read the value of an order and number of orders. The calculate the total price by multiply "price" with "total Number" and assign it to variable "total_ price". Print the total price.
Output:
Enter the price of an order:12.5
Enter the number of orders:3
total price of all orders: 37.5
To learn more about two variable refers to;
https://brainly.com/question/13167185
#SPJ4
in what year was the world wide web born via the development of hypertext markup language (html), and who developed html?
HTML was developed in 1990 by Tim Berners-Lee at CERN (European Organization for Nuclear Research).
When was HTML developed and by whom, resulting in the birth of the World Wide Web?The World Wide Web (WWW) was born in 1990 with the development of Hypertext Markup Language (HTML) by Tim Berners-Lee at the European Organization for Nuclear Research (CERN).
HTML is a programming language used to create webpages and websites, which allows for text, images, audio, and video to be displayed on a web browser.
It consists of a set of tags that are used to describe the content of a web page, making it easier to navigate and access information on the internet.
Learn more about Programming: https://brainly.com/question/16397886
#SPJ4
you take the final step in the claim method and make the call. true or false? the video reports information that would be deemed good science.
false you take the final step in the claim method and make the call. the video reports information that would be deemed good science.
What is the nutritional claim?A food is said to have certain favorable nutritional qualities because of the energy, nutrients, or other substances that are delivered, not provided, or provided in increased/decreased amounts. You proceed to the following stage of the CLAIM process and look into additional product research. There is no research to support the manufacturer's claims.
What comes first in the claim processing process, quizlet?Processing an insurance claim involves several initial processes, including. Obtain an information release statement. Using a tickler file is a convenient way to keep track of the status of paper insurance claims.
To know more about claim method visit:-
https://brainly.com/question/13423321
#SPJ4
what value will this piece of python code return? python_list = [4, 6, 7, 3, 5] print(python_list[3])
The code creates a list named "python_list" containing the values 4, 6, 7, 3, and 5. When the list is indexed with the value 3, it will return the element at that index, which is 3. So the output of the code will be 3.
This Python code declares a list named python_list with the values [4, 6, 7, 3, 5]. The print() function is then used to output the value at index 3 of the list, which is 3. So, the code will return 3.
Python is a high-level, interpreted programming language known for its simplicity, readability, and versatility. It is compatible with a variety of programming paradigms, including procedural, object-oriented, and functional programming. Python is commonly used for web development, data analysis, artificial intelligence, and scientific computing, among other applications.
It is widely used for web development, data analysis, artificial intelligence and other applications. It is easy to learn, with a simple syntax that is expressive and readable, making it a great choice for beginners and experienced programmers alike.
Learn more about Python here:
https://brainly.com/question/28691290
#SPJ4
how does netflix’s internal culture negatively or positively affect their ability to stay competitive and deliver cutting-edge content?
Netflix's internal culture negatively affects their ability to stay competitive and deliver cutting edge content by discouraging employees from taking risks and being creative.
History has shown that Competition is great for the consumers as it forces companies to alter their strategies in a way that benefit the consumer. In today's world new Digital Content providers have to bring something new, innovative, or cheap in order to compete with Netflix. Therefore, when this happens, Netflix must respond by either providing customers with an incentive to stay (such as adding offers or special content only found on Netflix) or lowering prices to become the better deal.
To learn more about Netflix ,visit:
https://brainly.com/question/13362103
#SPJ4
for what tasks are neural networks superior to other techniques such as decision trees or k-nn classifiers?
It is theoretically possible to learn any function using a neural network because it is a universal function approximator.
Are neural networks better than decision trees?While decision trees are superior at handling binary data, neural networks are unable to handle category values. Decision trees appear to be a better model based on the visual representation shown above and the explanation of how each model handles data.This is because, by default, a decision tree "throws away" input data that it doesn't find helpful, but, unless feature selection is performed as a pre-processing step, a neural network uses all input information. The trees are quite comprehensible if it is crucial to comprehend what the model is doing.Although less logically, the prediction function of K-nearest neighbour can be expressed as a neural network because it predicts the label of a new datapoint from the test set.To learn more about network refer to:
https://brainly.com/question/27371893
#SPJ4
which mode of operation for the vi editor allows you to perform complex operations, such as saving a document to a file with a different name?
Note that the mode of operation for the VI Editor allows you to perform complex operations, such as saving a document to a file with a different name is: Command Line Mode.
What is the VI Editor?
VI is a text editor for the screen that was first designed for the Unix operating system. The Single Unix Specification and POSIX outline a portable subset of the behavior of vi and applications built on it, as well as the ex-editor language supported within these programs.
Vi is the default editor included with the UNIX operating system (visual editor). We may use vi editor to modify an existing file or build a new one from scratch. This editor may also be used to just read a text file. vi filename is the syntax.
Learn more about VI Editor:
https://brainly.com/question/29989207
#SPJ1
the process of taking components from data sources and analytics platforms to create a more user-friendly experience that makes finding critical insights easier is called
The process of taking raw data from various sources and transforming it into useful and actionable information is known as data visualization.
Data visualization refers to the process of converting complex data sets and information into graphical representation, using various tools and techniques, in order to make it easier for the users to understand and analyze. It involves taking data from various sources and analytics platforms, cleaning and transforming it, and finally, presenting it in a way that is easily accessible and understandable for the end user. This can be done through the use of charts, graphs, maps, and other graphical representations that provide an intuitive, interactive, and engaging experience to the user. Data visualization is an essential tool in the business world, as it helps organizations make informed decisions, track performance, and identify key trends and patterns in their data.
To know more about Data visualization Please click on the given link
https://brainly.com/question/14467658
#SPJ4
sean wants to change some details about his header and he remembers that he needs to make those changes in the design tab. he is looking at his ribbon but can't find the tab. can you help him?
Click Header & Footer under the Text group on the Insert tab. The worksheet appears in Page Layout view in Excel.
Click the left, center, or right header or footer text boxes at the top or bottom of the worksheet page to add or update a header or footer (under Header, or above Footer). Column heads in Excel must be explicitly configured to repeat. They are identical. The precise type of data that each column carries can be determined from the page headers. Page headers give us the ability to include significant meta data in addition to worksheet content. Open the Excel sheet, navigate to Page Layout, pick Themes, click Fonts, then select your preferred font from the drop-down menu.
Learn more about header here-
https://brainly.com/question/15163026
#SPJ4
what is the difference between a class and an instance of a class? explain with the help of at least one example:
An instance of a class is a unique object made from a class, whereas a class is a blueprint for making objects.
A class is a blueprint for constructing objects (a specific data structure), setting starting values for state (member variables or attributes), and implementing behaviour in object-oriented programming (member functions or methods). A class instance is a unique object derived from a class that has its own state and behaviour.
Consider a class called Person, for instance, which has the methods greet() and introduce, along with attributes like name and age (). If we make two instances of the class Person, person1 and person2, they will each have their own names, ages, and be able to call their own greet() and introduce() methods.
To know more about the class visit: https://brainly.com/question/29992764
#SPJ4
which rnc function is responsible for allocation of bearer? a) Load control. b) Admission control. c) Micro diversity. d) Resource manager
The correct answer is d) Resource manager rnc function is responsible for allocation of bearer.
Simply put, a resource manager's duty is to oversee all of your company's resources, particularly its workforce. Finding the appropriate candidates for a position is one of the many duties of a resource manager, sometimes referred to as a human resource management (HR manager). Managers of human resources oversee the operations of a company that provides for its employees. They are executives within HR departments. Although the function might change depending on where you work, many of the fundamental duties of human resources managers are universal.
To learn more about Resource manager click the link below:
brainly.com/question/1837733
#SPJ4
on-line testing systems and interactive software are applications of the operant conditioning principles of:
The operant conditioning concepts of shaping and quick reinforcement are applied in online testing systems and interactive software.
What is the application of operant conditioning techniques called?Using operant conditioning techniques to modify or get rid of unhelpful or troublesome behaviour. Also known as applied behaviour analysis.The primary distinction between classical and operant conditioning is that while operant conditioning links voluntary action to a benefit, classical conditioning links voluntary action to a stimulus. Two key ideas in behavioural psychology are classical and operant conditioning.Numerous real-world applications, particularly those related to mental health, have utilised the concept of classical conditioning. Others include the educational system, advertising, pet training, placebos, and taste aversions.Although there might not be a direct connection between the product and the desired reaction, classical conditioning in business refers to producing responses that are beneficial to the product.To learn more about conditioning refer to:
https://brainly.com/question/25877954
#SPJ4
given a game tree with branching factor b and depth d, what is the number of nodes a minimax algorithm will need to visit in the dth level? g
The formula b^d indicates how many nodes a minimax algorithm will need to visit in the dth level of a game tree with branching factor b.
How many nodes on the dth level will a minimax algorithm need to visit?A minimax algorithm will need to visit b^d nodes in order to complete the dth level. This is because the algorithm will need to analyze b branches at each level. The process will then have to analyze b branches for each branch for the following level, and so on, until the dth level is reached.The equation b^d indicates how many nodes a minimax algorithm will need to visit at the dth level. This is referred to as the game tree's branching factor. The amount of possible actions or decisions a player can do at any particular point in the game is known as the branching factor. For instance, if a game tree has a branching factor of 2 and a depth of 3, the number of nodes that a minimax algorithm must traverse at the third level is 2^3 = 8.Calculating the number of nodes that a minimax algorithm will have to visit at the dth level depends on the branching factor of a game tree. It can be used to decide the best movements for a particular strategy and is useful for examining an algorithm's complexity. By comparing the costs of each move, the branching factor can also be used to determine the optimum option given a specific game state.To learn more about Minimax Algorithm refer to:
brainly.com/question/15170174
#SPJ4
the left hemisphere is dominant in ____. it processes what you hear and handling most of the duties of speaking.
Answer: speech
Explanation:It processes what you hear and handling vast majority the responsibilities of speaking
as one of barilla’s customers, what would your response to jitd be?
I admire Barilla's dedication to finding innovative operation approaches to better serve clients like myself. JITD is something I'm willing to explore because I think it might result in better customer service.
I use Barilla products, and I like the company's dedication to finding innovative approaches to better serve customers like me. I am willing to give JITD a try because I am aware that it is a cutting-edge method of inventory management that could simplify the ordering and delivery procedure. Since it might cut down on the time needed to complete orders and the expense of inventory management, I think it has the potential to enhance the entire customer experience. Furthermore, since orders may be customized to match specific consumer demands, it may help reduce food waste. I have faith in Barilla to make JITD a success, and I'm excited to be a part of the new framework.
Learn more about operation here-
brainly.com/question/28335468
#SPJ4
the software program that converts programming language code into binary code that can be read by the cpu is called a .
It is a program that encodes the computer processor-friendly language into the human-readable code (binary 1 and 0 bits)
How is machine code read by the CPU?
The "fetch-execute" cycle is how the CPU processes instructions. It retrieves the first instruction in the sequence, executes it (by, for example, adding two numbers), then fetches the next instruction, executes it, and so on.
How can binary be decoded speedily?
One of the simplest methods for transferring binary integers into decimal numbers is via doubling. We must select the number's leftmost or most significant bit. The result is then stored after being multiplied by 2, added, and the second-leftmost bit.
To know more about software program visit:
https://brainly.com/question/2553593
#SPJ4
what is the smallest positive integer s such that s can be exactly represented, but s 1 cannot be exactly represented? floating point
Since it is neither positive nor negative, 0 is not a positive integer. Numbers above 0 are referred to as positive integers.
Is zero the lowest positive number?
An integer's absolute value is greater than the integer. (vi) A positive integer always outweighs its negative counterpart. Each negative integer is less than each natural number (see clause vii). The smallest positive integer is zero (viii).
What are the largest and smallest positive values that the 32-bit normalized form can represent?
These are the smallest and largest positive numbers that can be stored in a 32-bit representation using the format described above. The biggest positive number is therefore (215-1)+(1-2-16)=215(1-2-16)=32768, and the space between these numbers is around 2-16 0.000015 is 2-16.
To know more about smallest positive integer visit:
https://brainly.com/question/23287381
#SPJ4
lot-for-lot replenishment is most appropriate for which types of orders?
The lot-for-lot lot-sizing method is especially suitable when demand is not uniform and setup costs are low relative to holding costs. Whenever possible, it is best to employ the lot-for-lot method.
Only very precise lot sizes that are determined in advance can make MRP work. The lot-for-lot lot-sizing method is especially suitable when demand is not uniform and setup costs are low relative to holding costs. 2) Whenever possible, it is best to employ the lot-for-lot method. Using the lot-for-lot technique, orders are made in exactly the amount required. The lot or run size is equivalent to the net requirements for that period, or the demand for that period, in a materials requirement planning (MRP) setting.
Learn more about the lot-for-lot,
https://brainly.com/question/30174763
#SPJ4
which command or key combination allows a user to return to the previous level in the command hierarchy?
a. end
b. Ctrl-Z
c. Ctrl-C
d. exit
An individual can go back to the preceding level of the command hierarchy by using the EXIT command or key combination.
CTRL-Z and End put the user back in the privileged EXEC mode. Ctrl-C terminates an active command. The exit command takes the user back to the level before.
In Linux, the exit command is used to end the shell process that is now active. It returns status N and takes one more parameter as [N] before leaving the shell. If n is not specified, it simply delivers the results of the most recent command to be run.
The terminal window will shut and return a status of 110 when you push enter. Return status is significant since it's possible for them to translate to errors, warnings, and alerts at times. For instance, the return status "0" indicates that the application ran correctly in most cases. The application contains a "1" number of small mistakes.
Learn more about Command here:
https://brainly.com/question/29615268
#SPJ4
the design of computers, devices, and media in a network is categorized as either client/server or peer-to-peer. what is the term used to refer to this characterization?
The design of computers, devices, and media in a network is categorized as either client/server or peer-to-peer. The term used to refer to this characterization is "network architecture."
Network architecture refers to the design of computers, devices, and media in a network and how they interact and communicate with each other. The two main types of network architectures are client-server and peer-to-peer.
Client-server network architecture consists of centralized servers that provide services and resources to clients on the network. Clients request resources and services from the server, and the server responds by providing the requested information. The client-server model is commonly used in businesses and organizations where a central authority manages and distributes resources to clients.
Peer-to-peer network architecture, on the other hand, does not have a central authority. Instead, each node on the network functions as both a client and a server, providing and receiving resources and services from other nodes on the network. This type of network architecture is commonly used for file sharing and other decentralized applications.
To know more about network architecture visit:https://brainly.com/question/13327017
#SPJ4
why is cit 240 so hard
Because it covers so many intricate ideas in relation to software development and computer programming, CIT 240 is a difficult subject.
Because it covers so many intricate ideas in relation to software development and computer programming, CIT 240 is regarded as a difficult subject. It necessitates a lot of coding, problem-solving, and critical thinking abilities. The course's complex material may be challenging for students who are just starting it to understand. Throughout the course, there are also frequently a lot of assignments, assessments, and exams that must be finished. As a result, in order to succeed, it is crucial for students to set aside enough time for their studies and to gain a solid grasp of the concepts. CIT 240 is a difficult subject.
Learn more about computers here:
brainly.com/question/30206316
#SPJ4
when windows first starts and the user signs in, a message about a missing dll appears. which tool or method should you use first to solve the problem?
The tool or method that you use first to solve the problem are:
a. Use Task Manager to identify the startup process.
c. Search the web on the error message to better understand the problem.
What is the windows about?The first tool or method you should use to solve the missing DLL error in Windows is the System File Checker (SFC) utility. SFC scans the system files and replaces any corrupted or missing files with a cached copy that is located in a compressed folder on the system. To run the SFC utility, follow these steps:
Open Command Prompt as administratorType "sfc /scannow" and press EnterWait for the scan to completeTherefore, If the SFC utility doesn't resolve the issue, you can also try restoring the system to a previous restore point or reinstalling the missing DLL file from a reputable source.
Learn more about windows form
https://brainly.com/question/25243683
#SPJ1
See full question below
When Windows first starts and the user signs in, a message about a missing DLL appears. Which tool or method should you use first to solve the problem? Second?
[Check all that apply]
a. Use Task Manager to identify the startup process.
b. Use the Services console to stop the process that needed the DLL.
c. Search the web on the error message to better understand the problem.
d. Use Component Services to register the DLL.
a. what fraction of original computation can be sequential to achieve speedup of 85 with 100 processors?
Approximately 85% of the original computer can be completed sequentially to provide an 85 speedup with 100 processors.
When parallel processing is employed instead of sequential processing, a system's speedup indicates how much faster it can perform a task. In order to attain an increase in speed of 85 using 100 processors, around 85% of the original computation can be completed sequentially.
The speedup will be 85 in this scenario if 100 processors are used. Thus, 100 processors are able to perform the operation 85 times more quickly than one CPU could. In order to obtain this speedup of 85, it follows that a portion of the original computation must be performed consecutively, and that portion is roughly equivalent to 85%. To accomplish this speedup, the remaining 15% of the computation needs to be performed in parallel.
Learn more about computers here:
brainly.com/question/30206316
#SPJ4
While While running an environmental scan, Gunnar has found several servers that are missing the latest security patches. What process has Gunnar been using?
a.Log review
b.Service discovery
c.Operating system fingerprinting
d.Port discovery running an environmental scan, Gunnar has found several servers that are missing the latest security patches. What process has Gunnar been using?
Gunnar has been employing an operating system fingerprinting procedure in accordance with the specified setup.
Are fingerprints and a background check the same thing?Fingerprint examinations necessitate the candidate actively participating in the process, in contrast to other security clearance techniques, which are often handled by a third party. In this method, the employer is required to confirm that the applicant can submit fingerprint somewhere at time of their application.
What must you n't be doing before getting your fingerprints taken?Avoid that are rough on your finger nails in the days before your fingerprinting session to ensure the best possible quality of your prints. For the majority of people, applying lotion and refraining from harm for a few nights should suffice.
To know more about Fingerprinting visit:
https://brainly.com/question/29764507
#SPJ4
an application that is running in a software is a service model that is characterized by which features?
Customers pay a regular subscription price to access the hosting application rather than an each perpetual license charge to own the product, which is the defining feature of software-as-a-service.
Which characteristics best describe a service model for an application that's also executing in software?Customers pay a regular subscription price to access a hosting application rather than a one-time permanent license charge to own the product, which is the defining feature of software-as-a-service.
Billing and invoicing software, collaboration software, web hosting software, and human resources software are additional categories of SaaS applications. You may choose which cloud solutions are most appropriate for your company out of all the available SaaS possibilities.
Software as a Service (SaaS) is a kind of software distribution system where a third party hosts a program and makes it accessible to customers online. It shares similarities with one of the three categories and the ASP (Application Service Provider). These are listed below:
Utilizing the cloudServices for infrastructure (IaaS)Software as a platform (PaaS)To learn more about Software Service model refers to;
brainly.com/question/14290655
#SPJ4
model the source, so you can reduce the total number of bits per sequence. discuss the condition for the bit rate reduction. apply your model to the above sequence. calculate the compression ratio.
Lossy compression reduces bits by excluding irrelevant or unimportant data. an instrument that compresses data typically.
What is a sequence of bits called?A series of bits is called a bitstream, often known as a binary sequence. Bytestreams are collections of bytes.The initial byte of data in this segment's first 32-bit sequence number field is given a number.Suppose the receiver window is 1 frame in size. So, the minimal amount of bits needed for the sequence number is log(51+1)/(log2) in base 2 which equals 6 bits.The smallest piece of data that can be processed and stored by a computer is a bit (binary digit). Like an on/off switch for a light, a bit is always in one of two physical states. A single binary number, often a 0 or 1, is used to indicate the state. However, the state might alternatively be expressed as true/false, on/off, or yes/no.To learn more about compression refer to:
https://brainly.com/question/17266589
#SPJ4
when riding over crack sealant or tar strips
When riding over crack sealant or tar strips Avoid too much lean. When you come across a significant amount of the slick black sludge,
Option A is correct.
The best way to reduce your speed is to gradually roll off the throttle and gently brake.
What is the proper function of the friction zone?Without changing the throttle, slowly release the lever until the bike begins to sag forward at idle speed. Engage the clutch once more to come to a stop. Rock back onto your heels once you're back on your feet and use the friction zone to push the bike forward.
How does a motorcycle rider decide where to go in a lane?Experienced motorcycle riders divide lanes into Right, Left, and Center positions. No single lane position is ideal for any traffic or road conditions. You must adjust your position in the lane to accommodate changing conditions.
Incomplete question :
Which of the following fills the blanks , when riding over crack sealant or tar strips ____
A.Avoid too much lean
B.Load Triangle
C.Water builds up under the tires
Learn more about Friction zone :
brainly.com/question/27239006
#SPJ4
what is the role of the address field in a packet traveling through a virtual - circuit network?
The virtual circuit number (local) addressing is defined by the address field. Compare switches that divide time and space.
Each packet during the data transfer phase must have a virtual-circuit identifier that indicates which virtual-circuit it belongs to. It is a network where a fictitious link between the source and the destination is created. During any call, packets will be exchanged across this network. The route chosen to connect two places looks to be a separate physical circuit. As a result, it is referred to as a virtual circuit. This kind of packet switching exists. Input ports, output ports, the routing processor, and the switching fabric make up a packet switch's four parts. The physical and data link operations of the packet switch are carried out by an input port. The output port carries out the same duties.
Learn more about network here-
https://brainly.com/question/14276789
#SPJ4
This problem shows how different propagation models can lead to very different SNRs (and therefore different link performance) for a given system design. Consider a linear cellular system using frequency division, as might operate along a highway or rural road, as shown in Figure 2.12 below. Each cell is allocated a certain band of frequencies, and these frequencies are reused in cells spaced a distance d away. Assume the system has square cells which are two kilometers per side, and that all mobiles transmit at the same power P. For the following propagation models, determine the minimum distance that the cells operating in the same frequency band must be spaced so that uplink SNR (the ratio of the minimum received signal-to-interference power (S/I) from mobiles to the base station) is greater than 20 dB. You can ignore all interferers except from the two nearest cells operating at the same frequency.
(a) Propagation for both signal and interference follow a free-space model.
(b) Propagation for both signal and interference follow the simplified path loss model (2.39) with d 0 = 100m, K = 1, and γ = 3.
(c) Propagation for the signal follows the simplified path loss model with d0 = 100m, K = 1, and γ = 2, while propagation of the interfererence follows the same model but with γ = 4.
a) In the open space model, for an uplink SNR of better than 20dB, the cells must be at least 5.65 km apart. (b) In order for the uplink SNR in the path loss model (2.39) to be larger than 20dB, (c) For the uplink SNR to be greater than 20dB for the path loss model with various computer values of gamma for the signal and interference, the cells must be separated by at least 4.47km.
The Friis transmission equation, which states that the ratio of the power received to the power sent is equal to the ratio of the antenna gains and the square of the distance between the antennas, is used to determine the minimum distance required for an SNR of at least 20 dB for the free space model. As a result, at least 5.65 kilometers must separate the cells for the SNR to be larger than 20 dB.For the path loss model (2.39), the equation for the path loss, which specifies that the path loss is equal to the ratio of the distance to some reference distance, is used to compute the minimum distance required for an SNR of at least 20 dB.
Learn more about computers here:
brainly.com/question/30206316
#SPJ4
do you need a kali server for ejpt v2
In this position, a 37-hour workweek is the norm, however flexible working arrangements are popular and you might need to work other hours beyond the normal 9am to 5pm schedule.
People having the CySA+ certification are employed by businesses of all sizes and types. However, when you start your job hunt, you might want to pay particular attention to those employers since some of them have a reputation for recruiting more CySA+ holders than usual. The technical stack, the flaws, and the tools at their disposal have them spellbound. However, many also find the pen testing work itself to be unpleasant and irksome.
Learn more about workweek here-
https://brainly.com/question/29418171
#SPJ4
