Thoughts about Genetically Modified Crops
EXPLANATION PLZ NO EXAMPLES
BRAINLYIST FOR BEST ANSWER.
What happens when the two wires going in to an appliance touch?
nothing
resistance
overload
short circuit
Answer:
You will receive an electrical shock. You will receive a shock if you touch two wires at different voltages at the same time. You will receive a shock if you touch a live wire and are grounded at the same time. When a circuit, electrical component, or equipment is energized, a potential shock hazard is present.
Explanation:
sorry this is like a year later and I hope this will help you if you haven't got it already
Answer:
Explanation:
They will short circuit and shock u did the exam
Jennie observes her brother playing pool and has a theory that the potential energy in the pool stick is transformed into kinetic energy when he hits the ball.
Answer:
This theory is true and should continue to expand on this theory.
Explanation:
hope this helps.
By looking at the relative positions of the elements calcium, Ca, fluorine, F, sulfur, S, and oxygen, O, in the Periodic Table, which TWO descriptions are TRUE about calcium fluoride, CaF2, and sulfur dioxide, SO2?
CaF2 is an ionic compound, and SO2i is a covalent compound.
CaF2 is formed by covalent bonds, and SO2 is formed by ionic bonds.
CaF2 cannot conduct electricity when dissolved in water, but SO2 can.
CaF2 is a gas at room temperature, while SO2 has a high boiling point.
CaF2 has a high boiling point, while SO2 is a gas at room temperature.
CaF2 is soft at room temperature, while SO2 is hard and forms crystals.
Answer:
Calcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.
Sorry if other question not answeredCalcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.
Thus, Since the turn of the 20th century, glass has been made with calcium fluoride, a novel substance. It is a solid that dissolves readily in water and has a special physical and chemical makeup that makes it suitable for usage as a glassmaking material.
Glass used in windows, bottles, and other glass goods was formerly created from calcium silicates before the invention of this substance. The new glass, referred to as glass with added fluorides, has a number of advantages over calcium silicates, which have drawbacks that make them unsuitable for the creation of modern glass.
Calcium Fluorine is a naturally occurring element that is frequently found in rock, soil, plants, and animals.
Thus, Calcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.
Learn more about Calcium fluoride, refer to the link:
https://brainly.com/question/28083686
#SPJ6
1. List four actions you can take to cope with changing emotions and energy during adolescence.
2. Explain how a high self-esteem might affect a person’s life.
3. Explain how to set priorities, and why setting priorities is important.
4. Identify the six keys to setting achievable goals.
5. Describe what it means to become mature.
Answer:
1. Deep breaths, have a good diet, workout, speak to someone if needed.
2. Having high self-esteem can help you see yourself in a better way and be more positive about things.
3. Make lists, what is most important. It's important to keep you organized.
4. "Get clear on your goal. Determine what is at stake. Develop a detailed action plan. Join (or form) a group committed to the same goal."
5. "Maturity is the art of being responsible for your actions, being sensitive and considerate towards others and having the ability to change and adapt to circumstances. An emotionally mature person is always adding value to himself and those around."
Explanation:
1]Here are five ways for teens to improve their emotional self-regulation.
Learning to Ride the Wave. When teens feel intense emotions, they sometimes try to push those feelings away. ...
Meditation and Mindfulness. ...
Physical Exercise. ...
Sleep Hygiene. ...
Creativity and Flow
2]When you value yourself and have good self-esteem, you feel secure and worthwhile. You have generally positive relationships with others and feel confident about your abilities. You're also open to learning and feedback, which can help you acquire and master new skills. ... Confident in your ability to make decisions
3]Sticking to regular routines and gathering up our priorities will not only help curve any negative feelings but also give us a sense of accomplishment throughout hard times. We can improve by knowing our priorities and what matters most in life. As well as setting good priorities to help guide us along the way.
4]Get clear on your goal. The more clarity you have the better. ...
Determine what is at stake. Why, exactly, do you want to accomplish this goal? ...
Develop a detailed action plan. ...
Go public with your commitment. ...
Join (or form) a group committed to the same goal. ...
Review your goal and rationale regularly.
5] Set goals effectively
Goals are the basis of an effective performance management process. There are two key elements to consider when developing goals. First, are goals written clearly and objectively? Second, are they directly contributing to the achievement of business strategy?
Typically, the process begins with departmental managers setting goals for their departments, based upon organization-wide goals, which support the general business strategy. Making departmental goals accessible to all managers ensures there is no overlap, reduces conflict, and allows members of different departments to see where they support each other and ensure they are not working at cross purposes. Each manager in turn shares the overall goals with his/her department and meets with employees to identify individual performance goals and plans.
When setting goals, key job expectations and responsibilities should act as the main guide and reference. Goals should be set that not only address what is expected, but also how it will be achieved. For example, the "what" covers quality or quantity expected, deadlines to be met, cost to deliver, etc. The "how" refers to the behavior demonstrated to achieve outcomes, for example, focus on customer service. In addition, some organizations choose to include competencies within performance expectations, to reinforce the link to business strategy, vision and mission.
An accepted framework to use to help write effective goals is SMART
please give me a branilyst
3.3 physics assignment.
Answer:
What do yalls teachers be givin yall?
Explanation:
i need help please help me , god will bless you tonight .
Answer:
HEHEHE HA
Explanation:
Clash royale
Which of the following paths correctly displays the transfer of energy for sound?
energy source to detection to medium
detection to an energy source to medium
medium to an energy source to detection
energy source to medium to detection
Answer:
the energy source, the transfer of energy through a medium,
Explanation:
The three parts of sound consist of the energy source, the transfer of energy through a medium, and the detection of the sound.
newtons first law
the only way to change the velocity of an object is to apply _____
Answer:
the only way to change the velocity of an object is to apply force.
Explanation:
Newton’s first law of motion says an object will continue to move with the same velocity unless acted on by an external force.
Answer: FORCE! the answer is force!
Please help me with this question,giving the first correct answer brainliest
Answer:
These elements are metalloids
Answer: C. Metalloids
Explanation:
Thank you for deleting that bot's answer.
On a particular day, Denali had a temperature of -23°C at its peak and 13°C at its base. What could be the reason for this temperature difference?
A.
Temperature increases with an increase in altitude.
B.
Temperature decreases with an increase in altitude.
C.
The base is close to the Gulf of Alaska.
D.
The mountain receives lake-effect snow.
Answer:
B.) Temperature decreases with an increase in altitude.
As you climb a mountain, you can expect the air temperature to decrease by 6.5 degrees C for every 1000 meters you gain. This is called the standard average lapse rate.
What is the Genetic Modification Process?
Brainlyist for the best answer
Answer:
Production of GMOs is a multistage process which can be summarized as follows:
1. identification of the gene interest;
2. isolation of the gene of interest;
3. amplifying the gene to produce many copies;
4. associating the gene with an appropriate promoter and poly A sequence and insertion into plasmids;
5. multiplying the plasmid in bacteria and recovering the cloned construct for injection;
6. transference of the construct into the recipient tissue, usually fertilized eggs;
7. integration of gene into recipient genome;
8. expression of gene in recipient genome; and
9. inheritance of gene through further generations.
What are the negative impacts on Genetically Modified Crops?
EXPLANATION ONLY NOT EXAMPLES PLZ
Brainlyist for best answer
I don’t quite understand these could someone walk me through it when they give the answer?
Answer: :)
Explanation:
So basically, the first image shows a magnetic force created by the magnetism. This attracts/pushes away other magnets. The second picture is showing two magnets being held together while they are trying to push away from each other. The third picture is demonstrating the release of the magnets. As soon as you let go, the magnets push away from each other. I think the PE and KE are like models of batteries. PE is potential energy, being dormant until released. KE is kinetic energy, the energy that depends on the motion of the object. The more energy used, the more you fill in the battery. I hope this helps!
What is the Genetic Modification Process?
Brainlyist for the best answer
Answer:
GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.
Explanation:
Hi guys can you help me with finding advantages with nuclear power?
Answer:
Low-cost energy. Although building nuclear power plants has a high initial cost, it’s relatively cheap to produce energy from them and they have low operating costs.
Reliable. One of the biggest benefits of nuclear energy is that it is a reliable power generation source.
Zero carbon emissions. Nuclear power reactors do not produce any carbon emissions.
Promising future energy supply.
Answer:
Nuclear Power can make a lot of power really fast and pollutes earth less than burning fossil fuels.
Explanation:
Use the phrases building up and breaking down to explain how deposition differs from weathering?? I did this for class today the rest of the worksheet but I didn't get this one could someone help me please.
Answer:
Explanation:
Weathering is the breaking down of rocks into smaller pieces and deposition is the building up of some kind of natural structure using erosion. So basically its rocks moving around to create bigger, better rocks.
Hi! I really need help on these questions, it would be great if you can answer them!
1: Equilibrium
[] When two forces are equal in opposite directions, they are in a state of equilibrium
2: Friction
[] It can be hard to sometimes slide a paper across a table, roll a car across the ground, etc etc. This is because of a force called friction which resists motion
3: Displacement
[] Work is only "done" when the object or surroundings are having movement, or in motion, and this creates displacement
4: Force
[] A force is a push/pull in any direction, this is a simple definition so not much can be added.
5: Inertia
[] Inertia is a force that likes to remain unchanged, or without movement
6: Effort
[] "Meg is holding up weight without movement. She hasn't done any work since it did not move, but is tired. Why?" Effort! She still put in effort even though no "work" happened
7: Work
[] Force times displacement is the equation for work
8: Motion
[] Look back to #3, when there is motion we can tell work is done
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
If a person weighs 100 pounds what is the gravitational force that is pulling downwards on the person.
Answer: 444.5N (Newtons)
Compare the cost of using pan with a power rating of 2kW and a pan rated 1.2kW
Answer:
3.2wK
Explanation:
Sorry if it is wrong my cousin told me
So i need help- with science
Does light have a shadow?
Answer:
light itself doesn't have a shadow
Explanation:
light emits light to where things around the light may create the shadows
Answer:
No
Explanation:
Actually it the complete opposite. A shadow is an absence (or decrease of) of light because an object blocking its path.
Jennie observes her brother playing pool and has a theory that the potential energy in the pool stick is transformed into kinetic energy when he hits the ball.
Which explains how she can prove her theory?
A
She could measure the potential energy in the motionless ball on the pool table, and she could measure the potential energy of the pool stick as it moves to strike the ball. These total of these two measurements will be equal to the kinetic energy in the pool ball as it moves, and this proves there was a transformation of energy.
B
She could measure the potential energy when the pool stick is pulled back to strike the pool ball, and then she could measure the kinetic energy in the pool stick as it moves to strike the ball. The potential energy in the pool stick and the kinetic energy in the pool stick should be equal, proving there was a transformation of energy.
C
She could measure the potential energy when the pool stick is pulled back before moving to strike the pool ball, and she could measure the kinetic energy of the ball in motion after the pool stick strikes it. There should be an equal amount of kinetic energy and potential energy to prove there was a transformation of potential energy to kinetic energy.
D
She could measure the potential energy of the pool ball when it was sitting on the table, and she could measure the kinetic energy of the ball in motion after the pool stick strikes it. There should be an equal amount of potential energy in the motionless ball and kinetic energy in the ball after the stick strikes it to prove there was a transformation of potential energy to kinetic energy.
Answer:
Your answer would be C
Explanation:
hope this helps.
Pitch is determined by the ____ of a sound wave.
velocity
wavelength
frequency
amplitude
3.2 physics assignment.
Answer:
SN, PE
Explanation:
When going from slower medium to a faster medium, light is bent _____.
Answer:
When going from slower medium to a faster medium, light is bent _downwards_.
Explanation:
hope this helps you!
____ have the highest energy radiation of the Electromagnetic Spectrum.
microwaves
infrared rays
x-rays
gamma rays
A Chef is looking for a new frying pan that will allow her to cook food quickly at temperatures above 500°C. Use the data provided in the table to explain to the Chef which metal would be the best choice for a new frying pan for her kitchen.
What is your claim? Which metal is the best choice? (
What is your evidence?
What is your reasoning?
Answer:
Explanation:
1st one
What is your evidence?
Very heavy professional or restaurant pans will have iron handles, while those for home use will be made of brass or stainless steel. All are perfectly safe for oven use.
analyze if the frequency of a sound wave increases what happnes to the wavelength
Answer:
it's either a b c or do I swear
GIVING BRAINLIEST!!!!
Answer:
1. Pecan tree 1 and pecan tree 4
2. I don't know
Explanation:
