The given question is incomplete and the complete question is
When 2 moles of Fe(s) react with Cl2(g) to form FeCl3(s) according to the following equation, 799 kJ of energy are evolved. Is this reaction endothermic or exothermic and What is the value of q
When 2 moles of Fe(s) react with Cl2(g) to form FeCl3(s) according to the following equation, 799 kJ of energy are evolved then the reaction is exothermic reaction and the value of q is -1598 kJ
Mole is the amount of substances of a specified elementary entity
2 moles of Fe(s) react with Cl2(g) to form FeCl3(s)
Energy = 799 kJ
We have to calculated reaction endothermic or exothermic = ?
The value of q = ?
So according to the reaction 799 kJ of energy are evolved it means that the enthalpy is negative as the reactant have more energy than the product and which means this is an exothermic reaction
And here we know that enthalpy of reaction is -799kJ/mol and considering the reacted 2 mole of solid iron then
q = 2 mol×-799kJ/mol
q = -1598 kJ
-1598 kJ energy are evolved when 2 mole of solid iron is react
Know more about exothermic
https://brainly.com/question/20565601
#SPJ4
How many formula units of NaCl are there in a 10. 95 mole sample of sodium chloride
Answer: 6.59 x 10^24 formula units
Explanation: Formula units are another word for atoms, meaning we use Avogadro's number (6.022x10^23 atoms per mole), we multiply 10.95 by Avogadro's number to get the answer
18 in scientific notation
Move the decimal so there is a non-zero digit to the left of the decimal point. The number of decimals you move will be the exhibitor on the 1010. If the decimal has been moved to the right, the exponent will be negative. If the decimal has been moved to the left, the exponent will be positive.
[tex]1.8 \times 10 { }^{1} [/tex]
fermentation products can include commonly known compounds such as lactic acid and ethanol, but many other products like butanol, acetic acid, and succinic acid are also possible because
Fermentation products can include commonly known compounds such as lactic acid and ethanol, but many other products like butanol, acetic acid, and succinic acid are also possible because, these products arise to complete catabolism of glucose and regenerate NAD+ from NADH.
What is Fermentation?
It is an anaerobic process in which energy can be released from glucose even if oxygen is not available.”
The main purpose of fermentation process is not producing energy but to regenerate the NAD+ from NADH. The NAD+ thus produced are utilised in oxidation of glucose. The NAD+ is reduced to NADH and is used in various stages of glucose oxidation (glycolysis, Krebs cycle, oxidative phosphorylation). Thus production of NAD+ along with butanol, acetic acid, succinct acid helps in continuing the glucose oxidation without interruption of shortage of oxidising agent (NAD+)Learn more about fermentation - Brainly.com https://brainly.com/question/11554005
#SPJ4
2. 2.00 gram of a compound requires the following quantities of solvent to dissolve: 90.0 ml of water, 7.50 ml of chloroform, 32.0 ml of diethyl ether, or 85.0 ml of benzene. calculate the partition coefficient of the compound between chloroform and water, diethyl ether and water, and benzene and water. which solvent would you choose to extract the compound from an aqueous solution?
Partition coefficient Chloroform = 11.98, Diethyl Ether = 2.81 and Benzene = 1.05
Chloroform would be the ideal solvent to use when extracting the chemical from an aqueous solution because it has the highest solubility.
A solution is a homogenous mixture of one or even more solutes in a solvent. Adding sugar cubes to a cup of tea or coffee is an example of a solution. A property that facilitates the dissolution of sugar molecules is solubility. Solubility is the property of a substance (solute) to dissolve in a particular solvent. A solute is any solid, liquid, or gaseous substance that dissolves in a solvent.
The compound needs 2 grams of solvent to dissolve it.
Finding solubility
For water, 2g/90ml= 2.22
For chloroform, 2g/7.50= 26.6
For diethyl ether, 2g/32= 6.25
For benzene, 2g/85= 2.35
Partition Coefficients -
For chloroform = 11.98
For Diethyl Ether = 2.81
For Benzene = 1.05
As a result of its high solubility, chloroform would be used to extract a compound from an aqueous solution.
Know more partition coefficients at:
https://brainly.com/question/16953107
#SPJ4
Does alcohol really burn off when cooking? what are the possible substitutions for alcohol in recipes?.
Yes, alcohol burns off when cooking. To make sure that alcohol cooks out completely, you need to cook the food longer. The possible situation for alcohol in recipes is fermentation.
Foods undergo fermentation process for saving and storing them for longer periods through preservation.
In general, alcohol is used during fermentation process to increase their storage time.
During fermentation, food is cooked for about 15 minutes. That is why most foods contain almost 40 percent of alcohol in them.
In order to remove alcohol, it is necessary to cook food longer. The longer you cook, the more alcohol cooks out.
However, to remove all traces of alcohol, make sure to cook food for about three hours.
If you need to learn more about alcohol click here:
https://brainly.com/question/947751
#SPJ4
assume that coal can be represented by the chemical formula c135h96o9ns . if 2.00 tons of coal is burned, what mass of nitrogen in the form of nox gases, is produced by this combustion?
If 2.00 tons of coal is burned, then the mass of nitrogen in the form of nox gases, is produced by this combustion is 400134 g of nitrogen.
The chemical reaction equation can be written as
C135H96O9NS + 156O2 ------- 135CO2 + 48H2O + NO + SO2
Mass of 2.0 tons of coal in gram = 1.814 × 10^(6) g
Molar mass of C135H96O9NS can be calculated as = 135(12) + 96(1) + 14 + 32 = 1904 moles of coal
Now, number of moles of coal burned = 1.814 × 10^(6) g / (1906 g/mol) = 952.7 moles of coal
If 1 mole of coal produced 1 mole of NO
Total 952.7 moles of coal produced 952.7 moles of NO
Mass of NO can be calculated as
Mass of NO produced = 952.7 × 30 = 28581 g
1 mole of NO = 30 g of NO
Thus, 14 g of nitrogen is contained in 30 g of NO
Let xg of nitrogen is contained in 28581 g of NO
Then,
x = 14 × 28581 = 400134 g of nitrogen.
If 2.00 tons of coal is burned, then the mass of nitrogen in the form of nox gases, is produced by this combustion is 400134 g of nitrogen.
learn more about combustion:
https://brainly.com/question/14335621
#SPJ4
determine the empirical formula of a mineral having the percent composition: 28.59% o, 24.95% fe, 46.46% cr.
The empirical formula of a mineral is FeCr2O4.
What is known as empirical formula?
The definition of an empirical formula for a compound is one that displays the ratio of the components present in the complex but not the precise number of atoms in the molecule. Subscripts are used next to the element symbols to indicate the ratios.
Explanation:
[tex]O: 28.59 g x 1 mole O/16 g = 1.79 moles OFe: 24.95 g x 1 mole/55.8 g = 0.447 moles FeCr: 46.46 g x 1 mole/52 g = 0.893 moles CrDividing through by 0.447 one gets 4O, 1Fe and 2CrEmpirical formula = FeCr2O4[/tex]
To learn more about empirical formula from the given link.
https://brainly.com/question/1603500
#SPJ4
The ratio between the components is the empirical formula. Presented as; FeCrO₃.
Why is the empirical formula?Typically, the equation is used to only show the components of a molecule. When one wishes to rapidly identify the elements they are working with, this is helpful. When you want to learn how many atoms of each element are present in the molecule, the chemical formula is the most helpful.
Briefing:Divide the percentage composition by the atomic mass of the elements
Fe =24.95 / 55.845 = 0.4467
Cr = 46.46 / 51.9961 = 0.8935
O = 28.59 / 16 = 1.78
Step 2:
Divide all though by the smallest number (0.4467)
Fe = 0.4467 / 0.4467 = 1.002
Cr = 0.8935 / 0.4467 = 1
O = 1.78 / 0.4467 = 3.038
The ratio between the components is the empirical formula. Presented as; FeCrO₃
To know more about Empirical formula visit:
https://brainly.com/question/11588623
#SPJ4
the species oxidized shows a(n) the species oxidized shows a(n) drop zone empty. the species reduced shows a(n) the species reduced shows a(n) drop zone empty. the species that shows a decrease in oxidation number is the the species that shows a decrease in oxidation number is the drop zone empty. the species that shows an increase in oxidation number is the the species that shows an increase in oxidation number is the drop zone empty. reducing agent. decrease in oxidation number. oxidizing agent.
1) The species oxidized shows a(n) = increase in oxidation number.
2) The species reduced shows a(n) = decrease in oxidation number.
3) The species that shows a decrease in oxidation number is the = oxidizing agent.
4) The species that shows an increase in oxidation number is the = reducing agent.
What do you mean by oxidation and reduction?The degree of biological activity controls both the formation of zones where specific redox processes predominate and the progression of environmental redox reactions. Anoxia, which are situations when the concentration of dissolved molecular oxygen is extremely low, is a requirement but not a sufficient condition for lowering conditions. The active microbial population shifts from communities that depend on aerobic respiration, in which molecular oxygen serves as the terminal electron acceptor, to anaerobic respiration, in which other chemical substances take the place of molecular oxygen as the terminal electron acceptor supporting respiration, as a result of the development of anoxia.
To know more about oxidation and reduction, visit:
https://brainly.com/question/12841557
#SPJ4
(c) Lithium oxide is an ionic compound.
Draw a dot and cross diagram to show how lithium and
oxygen combine to form lithium oxide.
Only show the electrons in the outer shell of each
atom.
Give the charges on the ions formed.
Answer:
Let us know formula and denotion for Lithium oxide is Li2O.
Explanation:
While on the basis of Electronic configuration:
Lewis structure(for Lithium atom)-Li•
For Oxygen atom- it is 6 dots in the Word O(for Oxygen) but is needed to paired in a pair(of two dots if possible) by the use of either all sides where two dots are presented two sides While one dot is represented on other two sides.
When we come across we might have a simple question how and why the Lithium oxide is Li2O
So,as we know Li(have one electron in its outermost shell),written as Li^+/+1 While Oxygen requires 2 more electrons to stabilize its valency,so it written as O^-2/2-
On combining,Li^+ & O^-2
Exchange and crossing up of valency is done forming Li2O.
Do check the image uploaded for better clarity and understanding.
13. Identify two elements on Mendeleev's table that combines with oxygen in the same ratio
as magnesium.
14. Identify one characteristic used by Mendeleev to develop his classification system of
the elements.
15. State one difference between Mendeleev's Table and the Modern Periodic Table.
Two elements on Mendeleev's table that combines with oxygen in the same ratio as magnesium are Beryllium and Calcium.
They form in a ratio of 1:1 with oxygen.
What is the reason behind Berylium and Calcium in the ratio of 1:1 with oxygen?
The one-to-one charge ratio results in the formula CaO. Calcium and Oxygen have iconic bonding because calcium loses two electrons and oxygen gains two to complete their octet.
BeO can be produced by the reaction between beryllium and oxygen .In this reaction , each Be atom loses its two valence electrons to 0 atoms , forming Be2+ions and O2- ions. The electrostatic attraction between the oppositely charged ions forms the iconic bond .
One characteristic used by Mendeleev to develop his classification system of the elements:
Mendeleev was directed by two variables: Expanding nuclear masses, and Gathering of components having comparative properties. Mendeleev thought about formulae of hydrides and oxides as one of the fundamental models for order, among substance properties.
One difference between Mendeleev's Table and the Modern Periodic Table is :
Mendeleev's periodic table is based on atomic mass whereas +The modern periodic table is based on the atomic number.
To learn more about Mendeleev's Periodic table from the given link:
https://brainly.com/question/11505562
#SPJ1
For mn3 , write an equation that shows how the cation acts as an acid.
Equation showing the Mn³⁺ cation acting as an acid:
Mn³⁺+ H₂O → MnOH²⁺ + H⁺
A cation is a positively charged ion in a metal element whose formation is carried out by releasing one or more electrons from its outermost electrons to achieve stability.
The intermediate reaction is an acid-base reaction. Acid-base reactions generally produce salt and water. However, in this reaction what is formed is an anion and a conjugate acid-base cation because it uses the Bronsted-Lowry acid-base principle. Mn³⁺ acts as an acid so that it donates a proton MnOH²⁺ to H⁺ so that the species formed are MnOH²⁺ and H⁺.
Learn more about cation acts as an acid here https://brainly.com/question/1687261
#SPJ4
Draw the structure or structures produced by the catalytic reduction of the given compound, in which h2 is in excess. Draw hydrogen at a chirality center and use wedge‑and‑dash bonds to designate the stereochemistry, if applicable.
Structures produced by the catalytic reduction of the given compound, in which H₂ is in excess are attached as a picture.
Upon the catalytic reduction of the given compound 1-ethylcyclohexa-1,4-diene (missing in question) by using excess hydrogen, two compounds (1R,2S)-1-ethyl-2-methylcyclohexane and (1S,2R)-1-ethyl-2-methylcyclohexane results. One compound has R,S configuration and the other has S,R configuration. By using the CIP rules priorities are given to the groups attached to the chiral carbon. CIP rules are based on the atomic masses of the groups attached so the minimum number is given to the group having the highest atomic mass. As it is a mixture of two enantiomers so we can call it a recemic mixture.
You can also learn about catalytic reduction from the following question:
https://brainly.com/question/14785855
#SPJ4
the reaction between copper and silver nitrate produces beautiful silver flakes and a bright blue copper (ii) nitrate solution according to the following reaction: cu 2agno3 2ag cu(no3)2 how many moles of agno3 will be needed to completely react with 10.0 g of cu?
0.3147128245 moles of AgNO₃ will be needed to completely react with 10.0 g of Cu.
Determine the number of moles of copper by dividing its mass by its molar mass.
moles Cu = mass Cu / MM Cu
moles Cu = 10.0 g/ 63.55 g/mol
moles Cu = 0.1573564123
Based on the balanced chemical reaction between copper and silver nitrate, 1 mole Cu needs 2 moles AgNO₃ to proceed with the reaction completely.
Cu + 2AgNO₃ ⇒ 2Ag + Cu(NO₃)₂
If there are 0.1573564123 moles Cu, then 0.3147128245 moles AgNO₃ is needed.
moles AgNO₃ = 0.1573564123 moles Cu(2 moles AgNO₃ / 1 mole Cu)
moles AgNO₃ = 0.3147128245
Learn more about chemical reactions here: https://brainly.com/question/14637486
#SPJ4
what molecule is the final electron acceptor after the electron has moved through the electron transport chain?
Oxygen is the final electron acceptor after the electron has moved through the electron transport chain.
In the electron transport chain, electrons are moved from protein to protein. The transport chain's succeeding proteins can each take an electron with a lower energy. Energy is released as electrons go from a high-energy state to a low-energy state. Protons are pumped across the membrane using this energy to create a gradient.
Oxygen serves as the ultimate electron acceptor (O2). Since oxygen has a strong affinity for electrons and a high electronegativity.
To know more about electron transport chain, click here,
brainly.com/question/876880
After passing through the cycle of electron transport, oxygen serves as the last electron acceptor.
From protein to protein, electrons are transferred along the electron transport chain. The proteins that follow in the transport chain can each accept an electron with a lower energy. Electrons move from a high-energy state to a low-energy state, releasing energy in the process. This energy is used to drive protons across the membrane, producing a gradient. As the ultimate electron acceptor, oxygen (O2). A high electronegativity and significant attraction for electrons are seen in oxygen.
Learn more about Oxygen here
https://brainly.com/question/24248083
#SPJ4
mass of methane will occupy the same volume as 0.0325 mol 0.0325 mol of propane at 1.00 atm 1.00 atm and 298 k?
5.18 grams of methane will occupy same volume as 0.0325 moles of propane.
The ideal gas equation says,
PV = nRT
Where,
P is pressure, V is volume, n is moles, R is gas constant, T is temperature.
Moles of propane is 0.0325 moles.
volume of propane at 1 atm and 298 K is,
V = nRT/P
V = 0.0325 x 0.082 x 298/1
V = 7.92 L
Volume of propane is 7.92 L.
we know, moles = mass/molar mass.
Molar mass of Methane is 16g/mol.
Moles of methane = mass/16
Volume of methane,
V = nRT/P
7.92 = mass x 0.082 x 298/16
Mass = 5.18grams.
So, 5.18 grams of methane will have same volume as that of 0.0325 moles of propane.
To know more about Ideal gas equation, visit,
https://brainly.com/question/20348074
#SPJ4
What compound is formed from Ca2+ and Cl1-
Answer:
You get CaCl2 (Calcium chloride)
Explanation:
Calcium has a +2 charge and chlorine has a -1 charge. You need the net ionic charge to equal zero so you need two chlorine atoms to have the +2 cancel out. You end up with CaCl2.
what is the energy (in joules) of the photon emitted when the electron of a he cation relaxes from the 3s orbital to the 2s orbital? enter the numerical answer only; do not enter a unit.
the energy emitted by photon was 0.300564×10-18 J
what is photon?
The term photon, which means "light" in Ancient Greek, refers to a basic particle that is a quantum of the electromagnetic field, which includes electromagnetic radiation like light and radio waves. It also serves as the force carrier for the electromagnetic force. Considering that photons have no mass, they always travel at the speed of light in a vacuum, which is 299792458 m/s (or 186,282 mi/s).
formula was
ΔE=R(1n2f−1n2i)
R=the Rydberg constant, 2.178×10-18 J
For a transition from n=3 to n=2, we get
ΔE=2.178×10-18 J(1/22−1/32)
=2.178×10-18 J(1/4−1/9)
=2.178×10-18 J× 9 – 4/9×4
=2.178×10-18 J× 5/36
=0.300564×10-18 J
hence the energy emitted by the photon was 0.00564x10-18J
To learn more about photon follow the given link: https://brainly.com/question/28467736
#SPJ4
The incomplete table below shows selected characteristics of gas laws.
Name
Variables
Constants
Equation
?
?
PV = k
Charles's law
?
V= kT
?
Temperature, pressure
?
P= kT
Combined gas law
Pressure, temperature, volume
?
?
Which constants would most likely be filled in the first row of the table?
O temperature and moles of gas
• volume and temperature
pressure and volume
O pressure and moles of gas
The complete table shows characteristics of gas law :
Variables constant Equation
Boyles law pressure , volume Temperature PV = k
Charles law volume ,temperature pressure V = kT
Gaylussac law pressure, temperature volume P = kT
combined pressure, temperature no. of moles PV = kT
gas law volume
1) The Boyles law states that : The pressure of the gas is inversely proportional to volume of gas.
P ∝ 1/V
PV = k
k is constant
2) The Charles law `states that at constant pressure the volume is directly proportional to temperature of gas.
V ∝ T
V = kT
3) The gay - lussac law states that at constant volume pressure is directly proportional to temperature.
P ∝ T
P = kT
4) The combined gas law is the combination of temperature , pressure and volume .
PV = kT
Thus, The complete table shows characteristics of gas law :
Variables constant Equation
Boyles law pressure , volume Temperature PV = k
Charles law volume ,temperature pressure V = kT
Gaylussac law pressure, temperature volume P = kT
combined pressure, temperature no. of moles PV = kT
gas law volume
To learn more about gas law here
https://brainly.com/question/12669509
#SPJ1
Answer:
The answer is A: temperature and moles of gas
Edge 2023
a ground-state h atom absorbs a photon of wavelength 93.78 nm, and its electron attains a higher energy level. the atom then emits two photons: one of wavelength 2626 nm to reach an intermediate level, and a second to reach the ground state. what was the wavelength of the second photon emitted?
Wavelength of the second photon emitted is 97.3nm. By using the formula E = hc/λ.
What is hydrogen energy level?A photon's frequency and Planck's constant are used to calculate the quantum energy. The relationship between wavelength and frequency is inverse, as seen below.
v = c/ λ
The energy of photon of light: given by the formula,
E = hv
E = hc/λ
Given,
wavelength of photon of light at higher energy level is 93.78 nm.
wavelength of photon of light at intermediate level is 2626 nm = 2626×10⁻⁹m
Etotal = hc/λ
Where,
E is the energy of a photon.
h is the Planck's constant (6.626×10⁻³⁴J⋅s)
c is the speed of light (3.0×10⁸m/s)
λ is the wavelength, wavelength is 93.78 nm.
1nm = 1×10⁻⁹m
Therefore, conversion of 93.78 nm into m is, 93.78nm=93.78×10⁻⁹m
Substitute:
Etotal = [tex]\frac{(6.626 . 10^{-34} )(3.0 . 10^{8}) }{93.78 .10^{-9} }[/tex]
Etotal = 2.12 × 10⁻¹⁸ J
the energy of 1 photon, E1 = [tex]\frac{(6.626 . 10^{-34} )(3.0 . 10^{8}) }{2626 .10^{-9} }[/tex]
E1= 7.57×10⁻²⁰
the energy of 2 photon, E2 = Etotal-E1
E2 = 2.044× 10⁻¹⁸J
wavelength of second photon,
λ = hc/E2
λ = [tex]\frac{(6.626 . 10^{-34} )(3.0 . 10^{8}) }{2.04 .10^{-18} }[/tex]
λ = 9.73 × 10⁻⁸m
conversion of m into nm, 1m = 1×10⁹nm
Therefore, conversion of 9.73×10⁻⁸m into nm is
9.73×10⁻⁸m = 9.73×10⁻⁸×10⁹nm =97.3nm
∴ wavelength of second emitted photon is 97.3nm.
To know more about hydrogen energy levels, visit:
https://brainly.com/question/20726375
#SPJ4
the molar heat of fusion of water is 6.02 kj/mol. calculate the energy required to melt 46.8 g of water.
When the molar heat of fusion of water is 6.02 kJ/mol, it takes 15.4 kJ of energy to melt 46.8 g of water. The enthalpy of a substance changes due to heat of fusion , which releases energy.
To convert a substance from a solid to a liquid while maintaining pressure, a certain amount of the substance must be used.
A thermodynamic system's enthalpy, which is one of its properties, is calculated by adding the system's internal energy to the product of its pressure and volume. It is a state heat of fusion that is employed in numerous measurements in chemical, biological, and physical systems while the pressure is constant. Called enthalpy
46g/18g equals mols of water.
mole-1 equals 2.56 mole
1 mole melts at a temperature of 6.02KJ of heat.
Heat needed to melt 2.56 moles is equal to 6.02kJ*2.56 = 15.4kJ.
Learn more about heat of fusion here
https://brainly.com/question/14053504
#SPJ4
thin-layer chromatography was performed and four spots were visualized on the glass slide. the substance with which rf value was least soluble in the stationary phase?
The spot with the lowest Rf value would be the most polar one and, thus, the one that is least soluble in the stationary phase.
Does more polarity indicate a higher or lower Rf value?
Calculating the Rf value is possible if you can see the spots. The identity and properties of the various compounds can be established using the Rf values. Since more polar compounds have a stronger affinity for the polar solid phase, they will have smaller Rf values.Rf values are typically higher for low polarity chemicals compared to higher polarity ones. Generally speaking, as polarity of a compound increases, so does its adsorptivity (i.e. the more polar the compound then the stronger it binds to the adsorbent).To learn more about Rf values, follow the link https://brainly.com/question/14393432
#SPJ4
what is the concentration of ammonia ( n h 3 ) in solution if 24.60 ml of 0.1080 m hcl is needed to titrate a 250 ml sample of the ammonia solution to the end point?
According to the given statement A solution's ammonia concentration will be 0.0106 M.
What is concentration in chemistry?The amount of solute contained in a specific solution volume is the substance's concentrations. The molarity of solute for 1 L of solution, or molarity, is used to express quantities.
Briefing:NH₄OH(aq) + HCl (aq)⇒ NH4Cl(aq) + H2O (l)
According to the neutralization law,
n[tex]_1[/tex]M[tex]_1[/tex]V[tex]_1[/tex] = n[tex]_2[/tex]M[tex]_2[/tex]V[tex]_2[/tex]
where,
M[tex]_1[/tex] = molarity of HCl solution = 0.1080 M
V[tex]_1[/tex] = volume of HCl solution = 24.60 ml
M[tex]_2[/tex] = molarity of NH₄OHsolution = ?
V[tex]_2[/tex] = volume of NH₄OH solution = 250.0 ml
n[tex]_1[/tex] = valency of HCl = 1
n[tex]_2[/tex] = valency of NH₄OH= 1
1 * 0.1080 M * 24.60 = 1 * M2 * 250.0
M2 = 0.0106
As a result, a solution's ammonia concentration will be 0.0106 M.
To know more about Concentration visit:
https://brainly.com/question/10725862
#SPJ4
Diana measured 233 mL for the volume of the object. The actual volume of the object was 241 mL. What is the percent error of Diana’s results?
Answer:
3.32%
Explanation:
To calculate the percent error, you need to use the following equation:
| measured value - actual value |
Percent Error = -------------------------------------------------- x 100%
actual value
In this equation, the measured value is the amount generated after running an experiment. The actual value is the amount generated solely through calculations.
Measured Value = 233 mL
Actual Value = 241 mL
| 233 mL - 241 mL |
Percent Error = -------------------------------- x 100%
241 mL
8 mL
Percent Error = ----------------- x 100%
241 mL
Percent Error = 0.0332 x 100% = 3.32%
What is the best use of probability in genetics?
A. To calculate the possible blood types of offspring
B. To exactly predict the the traits each offspring will have
C. To better parents' chances of having female or male offspring
D. To determine how many offspring parents will have
Answer: B
Explanation: Genetics has to do with genes, which is appearance, which is hereditary from the parent :)
Replace this sample text with the prompt or directions for this item.
The atomic number of an element is the number of
The atomic mass is the number of
The electrons in the outermost shell are known as the
protons protons and neutrons
valence electrons
Answer:
1. Protons
2. Protons and Neutrons
3. Valence electrons
Explanation:
describe the bohr model for the atom and explain how it accounted for the emission spectra of atoms.
The Bohr model for the atom explains how electrons chenges different energy levels and accounted for the emission spectra of atoms.
The Bohr model postulates that electrons orbit the nucleus at constant electricity ranges. Orbits in addition to the nucleus exist at better electricity degrees. While electrons go back to a decreased strength level, they emit energy in the shape of light.
Bohr's model shows that the atomic spectra of atoms are produced via electrons gaining energy from a few supplies, leaping as much as a better electricity degree, then without delay losing returning to a lower strength stage and emitting the strength difference among the 2 power ranges.
Bohr explained the steadiness of atoms by using presenting that electrons revolve across the nucleus inside the exact circular paths having fixed strength and while transferring in the same orbit they do now not lose or benefit from strength.
Learn more about Bohr's model here:-https://brainly.com/question/18002213
#SPJ4
what should the mole percent of oxygen be in the diving gas for the partial pressure of oxygen in the mixture to be 0.21 atm , the same as in air at 1 atm ?
the mole percent of oxygen be in the diving gas for the partial pressure of oxygen in the mixture to be 0.21 atm , the same as in air at 1 atm is 2.52%
Atm 8.32 is the total pressure.
0.21 atm is the partial pressure of oxygen gas.
The relationship between partial pressure, total pressure, and mole fraction is depicted here.
partial oxygen pressure Total pressure x Mole percent of oxygen -
Calculate the gas's mole fraction of oxygen.
0.21 atm 8.32 x Mole fraction
Mole fraction = 0.21/8.32 = 0.0252
As illustrated below, determine the mole percent of the gas. Mole percent is equal to the mole fraction divided by 100, which is 0.0252 times 100 and 2.52% respectively.
As a result, oxygen's mole percent is 2.52%.
learn more about mole fraction here:
https://brainly.com/question/8076655
#SPJ4
in the tlc experiment silica gel is used as a solid phase to differentiates between what kind of compounds?
Silica gel and alumina are the most often utilized adsorbents. A wide range of chemicals, including hydrocarbons, alcohols, ketones, esters, acids, azo compounds, and amines, are separated using silica gel.
Because of its outstanding separation capabilities, the Silica Gel G for Thin Layer Chromatography as binder is most commonly employed as an adsorbent in thin-layer chromatography.
What is Silica Gel?Silica gel is a porous and amorphous type of silicon dioxide composed of an uneven tridimensional structure of alternating silicon and oxygen atoms with nanometer-scale holes and pores. The spaces might be filled with water or other liquids, or they could be filled with gas or a vacuum.
Silica gel is a desiccant, which means it is a drying agent. Its purpose is to absorb moisture and condensation from its surroundings. It is a very efficient and cost-effective method for businesses to keep their items fresh and dry for consumers during storage and shipping procedures.
Learn more about Silica Gel:
https://brainly.com/question/13049734
#SPJ1
Sold substance a has a melting point at 100c. liquid substance b has a freezing point at 110c. for each substance, identify its state of matter and describe the motion of its particles when the substance is at 115c.
Substance A is a solid at 115° Celsius. Its particles are not moving while Substance B is a liquid at 115° degrees Celsius. Its particles are moving around freely.
Solid particles in substance A are not moving because they are held together by strong intermolecular forces. Liquid particles in substance B are moving around freely because they are not held together by strong intermolecular forces.
Intermolecular forces are the forces that hold molecules together. These forces are much weaker than the covalent or ionic bonds that hold atoms together in a molecule, but they are strong enough to keep molecules from flying apart. The four main types of intermolecular forces are dipole-dipole forces, London dispersion forces, hydrogen bonding, and ion-dipole forces.
Learn more about Intermolecular forces on : https://brainly.com/question/9007693
#SPJ4
what mass of methane will occupy the same volume as 0.0325 mol 0.0325 mol of propane at 1.00 atm 1.00 atm and 298 k?
0.79 gram is the mass of methane that will occupy the same volume as 0.0325 mol of propane at 1.00 atm 1.00 atm and 298 k.
The atmosphere contains small amounts of the gas known as methane. The simplest hydrocarbon is methane, which only has one carbon atom and four hydrogen atoms. Strong greenhouse gas methane is. Numerous anthropogenic (influenced by humans) and natural sources release methane into the atmosphere. Landfills, natural gas and oil pipelines, industrial processes, mining for coal, stationary and mobile combustion, wastewater treatment, and certain agricultural practises are examples of anthropogenic emission sources. propane primary applications include heating homes and water, preparing and storing food, driers for clothing, and industrial and farm machinery. Propane is also used as a raw material in the chemical industry to create plastics and other compounds.
Learn more about propane here:
https://brainly.com/question/11697104
#SPJ4