when an oxygen atom forms a chemical bond with another oxygen atom, what product does this reaction produce?

The laboratory procedure is for the 50.00 ml of the CuSO₄ solution with the concentration of 0.300 M. The mass of CuSO₄.5H₂O is required to prepare this solution is 2.5 g CuSO₄.5H₂O .

The concentration of the CuSO₄  = 0.300 M

The volume = 50 mL

The moles of  CuSO₄  = 0.300 × 0.050

                                     = 0.015 mol

Mass of  CuSO₄  = moles × molar mass

                            = 0.015 × 159.6

                            = 2.39 g

There are 5 moles of H₂O :

= 159.6 / ( 159.6 + 5 × 18 ) × 100 %

= 63.9 % of  CuSO₄

The mass of the CuSO₄.5H₂O = 2.39 ( 100 × 5H₂O / 63.6 )

                                                   = 2.5 g CuSO₄.5H₂O

To learn more about concentration here

https://brainly.com/question/15348078

#SPJ4

The enthalpy change, ΔH of the reaction is -74.1 kJ/mol.

The change in the enthalpy of a chemical reaction that takes place at constant pressure is known as the Heat of Reaction (also known as the Enthalpy of Reaction).

It is a thermodynamic unit of measurement that can be used to determine how much energy is released or created per mole during a reaction.

The enthalpy change, ΔH, of the given reaction is calculated as follows:

ΔH = ΔH₁ + ΔH₂ - ΔH₃

where;

ΔH₁ = -571.6 kJ

ΔH₂ = -393.5 kJ

ΔH₃ = -890.4 kJ

ΔH = -571.6 kJ + ( -393.5 kJ) - (-890.4 kJ)

ΔH = -74.7 kJ

Learn more about enthalpy change at: https://brainly.com/question/15174388

#SPJ1

The solution that contains the higher concentration of hydroxide ions , 0.5 mol/L sodium hydroxide or 0.25 mol/L barium hydroxide is the correct option is A. sodium hydroxide.

The  NaOH that is the sodium hydroxide solution contains the highest concentration of hydroxide ions. This is for the reason that sodium hydroxide (NaOH) is the very strong base and will dissociates almost completely in the water and  produce the Na⁺ ion and OH⁻ ion.

The concentration formula in mol/L is :

Concentration = moles / volume in L

Thus, the  0.5 mol/L sodium hydroxide will contains the higher concentration of the hydroxide ions.

To learn more about concentration here

https://brainly.com/question/29250352

#SPJ4

The process that takes place upon absorption of infrared radiation is bond vibration. So the correct option is "b".

Infrared radiation has a longer wavelength than visible light and does not have enough energy to cause an electron excitation or an electron spin flip. However, it does have enough energy to cause bond vibrations, which is why it is used in spectroscopy to measure the vibrational frequencies of chemical bonds.

Bond vibration occurs when infrared radiation interacts with molecules. The radiation has enough energy to cause the vibrational frequency of the chemical bonds to increase, which can be detected in spectroscopy. This increase in vibration is caused by the conversion of the radiation energy to vibrational energy of the molecule. The vibrational energy can then cause changes in the shape of the molecule, resulting in the stretching and bending of the bonds.

To know more about infrared radiation please refer:

https://brainly.com/question/13934832

#SPJ4

The elements that are reduced in the reactions are sulfur (a) and sodium (b), while the elements that are oxidized are oxygen (c and d).

In the chemical reaction a), sulfur (S) atoms are reduced because each atom loses four electrons, which results in a lower oxidation state for the sulfur. This means that electrons have been transferred from the sulfur to another species in the reaction, resulting in the reduction of the sulfur.

In the reaction b), sodium (Na) atoms are reduced because each atom loses one electron. The reduction of sodium is indicated by a decrease in its oxidation state, which occurs when electrons are transferred from the sodium to another species in the reaction.

In the reaction c), oxygen (O) atoms are oxidized because each atom gains one electron. The oxidation of oxygen is indicated by an increase in its oxidation state, which occurs when electrons are transferred to the oxygen from another species in the reaction.

In the reaction d), oxygen (O) atoms in H2O are oxidized because each atom gains one electron. The oxidation of oxygen is indicated by an increase in its oxidation state, which occurs when electrons are transferred to the oxygen from another species in the reaction.

Learn more about sulfur:

brainly.com/question/13469437

#SPJ4

Answer:

The chemical formula for the compound depicted in the diagram is: Ca3(P2O4)2

The cations in the compound are:

Ca2+ (calcium ion)

The anions in the compound are:

P3- (phosphite ion)

O2- (oxide ion)

Explanation:

Hope this helps!

Option (b) is correct. The equation for the rate of formation of 1-iodobutane from the reaction of 1-chlorobutane with NaI by SN2 mechanism is K [BuCl] [NaI].

SN2 mechanism is also called bimolecular nucleophilic substitution reactions.  In this reaction the nucleophile attacks and the leaving group leaves is simultaneous. so the bond making between the nucleophile and the electrophilic carbon occurs at the same time as the bond breaking between the electrophilic carbon and the halogen.  It is a type of nucleophilic substitution where a lone pair of electrons on a nucleophile attacks an electron deficient electrophilic center and bonds to it resulting in the expulsion of a leaving group. This reaction is stereospecific. The rate determining step of SN2 mechanism include both the alkyl halide as well as nucleophile as both will be present in the transition step and a 5 membered unstable intermediate will be involved.

To learn more about SN2 mechanism please visit:

https://brainly.com/question/14150949

#SPJ4

The complete question is,

What is the equation for the rate of formation of 1-iodobutane from the reaction of 1chlorobutane with NaI by an sn2 mechanism?

a. Rate = k[BuCl]

b. Rate= k [BuCl] [NaI]

c. Rate = k[NaI]

d. Rate =  K [ Bucl]2

Answer:

h

Explanation:

I. To calculate the mean volume of hydrochloric acid added, you need to find the average of the three values obtained from the burette readings.

First set: 24.80 - 0.00 = 24.80 cm³

Second set: 26.20 - 1.60 = 24.60 cm³

Third set: 26.55 - 2.00 = 24.55 cm³

The mean volume of hydrochloric acid added is (24.80 + 24.60 + 24.55) / 3 = 24.66 cm³

b. (1) To find the percentage of potassium in K₂CO₃, you need to calculate the mass of potassium in the compound and divide it by the total mass of the compound, then multiply by 100.

The relative atomic mass of potassium is 39.1 and the relative atomic mass of carbon is 12.01 and oxygen is 16.00.

So, the mass of potassium is 2 x 39.1 = 78.2 g.

The mass of carbon is 1 x 12.01 = 12.01 g.

The mass of oxygen is 3 x 16.00 = 48.00 g.

The total mass of the compound is 78.2 + 12.01 + 48.00 = 138.21 g.

The percentage by mass of potassium in K₂CO₃ is (78.2 / 138.21) x 100 = 56.6%.

One molecule of glucose contains 6 atoms. Compounds are stable when the atoms involved have an entire outermost electron shell.

What causes atoms to become charged when an ionic bond is formed?

Atoms become charged when an ionic bond is formed due to the transfer of electrons from one extent to another. This constructs a positive ion known as a cation and a negative ion known as an anion that is attracted to each other and forms an ionic bond.

The columns that are vertical in the periodic table are called groups or families.

Where are non-metals located on the periodic table?

Non-metals are typically located on the right side of the periodic table.

To know more about non-metals, visit here:

brainly.com/question/29404080

#SPJ1

In TLC analysis, Water is polar and will adhere to the silica and Separation of pigments will be unsuccessful.

TLC (Thin Layer Chromatography) is a method for separating and analyzing mixtures of chemical compounds. The stationary phase in TLC is typically a layer of silica or alumina on a glass or plastic plate. When a wet spinach extract is applied to the plate, the water present in the extract can interfere with the separation process

Water is polar and will adhere to the silica, causing the pigments in the extract to become more difficult to separate. This can result in a separation that is unsuccessful or less accurate than it would have been if the extract had been dry.

Hence, the correct options are "A" and "D".

To know more about analysis, click here.

https://brainly.com/question/28180154

#SPJ4

Five liters of -36 °C air are heated to 89 °C. If the pressure doesn't change, the new volume, V2, is 7.64 liters.

Pressure is the measure of how much force is exerted on a particular area. Pressure is defined as Force per Area. An object is under pressure when a force is applied to a portion of its surface. The pressure divided by the surface where another force is exerted is the expression for compression. If you touch the flat part of something, like a scalpel even, across fruit, the covering will hold up. A large area is covered by the force.

P = F / A, usually force per unit of area, is the formula for computing pressure. The sign for temperature in particle physics is p, and the basic measurement for determining pressure loss is the pascal.

To know more about pressure visit:

https://brainly.com/question/2704868

#SPJ1

Chemical Change. Chemical changes occur when bonds are broken and/or formed between molecules or atoms. This means that one substance with a certain set of properties (such as melting point, color, taste, etc) is turned into a different substance with different properties

Answer: Chemical Change.

Explanation: Chemical changes occur when bonds are broken and/or formed between molecules or atoms. This means that one substance with a certain set of properties (such as melting point, color, taste, etc) is turned into a different substance with different properties

The color of phenolphthalein indicator in a solution of hydrochloric acid will be colorless.

Phenolphthalein is a weak acid that changes color over a pH range of 8.2 to 10.0, going from colorless to pink as the pH increases. In a solution of hydrochloric acid, the pH is less than 8.2, so the phenolphthalein will not be pink, but will remain colorless. This indicates that the solution is acidic, with a pH lower than 8.2.

Phenolphthalein is often used in laboratory experiments, especially in the field of chemistry, to determine the endpoint of titrations and to monitor the pH changes during a reaction.

The color change of phenolphthalein occurs because the pink form of the indicator is a weak base and the colorless form is a weak acid. In an acidic solution, phenolphthalein will exist in its colorless, acidic form, and in a basic solution, it will exist in its pink, basic form. The exact pH range over which the color change occurs depends on the concentration of the phenolphthalein solution, but it is typically between 8.2 and 10.0.

Learn more about phenolphthalein here:

https://brainly.com/question/29583208

#SPJ4

The following summary reactions requires energy is the c) ADP + P --> ATP.

This reaction  ADP + P --> ATP is the endergonic reaction. The ATP stands for the adenosine triphosphate. The ADP to ATP conversion reaction is given as :

ADP + P --> ATP

This conversion is take place in the mitochondria. The mitochondria is the energy producing organelles. It also can occur in the cytoplasm which is the fluid in between the cell membrane and nucleus. The pyrophosphate bond is the covalent bond which stores the energy. The enzymes chains are present in the electron transport chain present in the mitochondria walls.

To learn more about ADP here

https://brainly.com/question/10942096

#SPJ4

The mass of the solid of density 1.75 g/ mole is 116.77g. This is calculated using the expression for density.

Density is defined as the mass per unit of volume of the substance. The symbol used for density is ρ. Basically density is defined as mass divided by volume.

Density = mass/ volume

mass of the liquid = 21.0 g

density of the liquid = 0.865 g/ mole

volume of liquid = mass / density

                            = 21.0 g / 0.865g/ mole

                            = 24.27 ml

The total volume of the solid and liquid together is 91.0 ml.

Total volume = volume of solid + volume of liquid

volume of solid =  total volume - volume of liquid

                           = 91.0ml - 24.27 ml

                           = 66.73 ml

density of the solid= 1.75 g/ mole.

mass = density * volume

         = 1.75 g /mole * 66.73 ml

         = 116.77 g

To learn more about Density please visit:

https://brainly.com/question/1354972

#SPJ4

The atomic mass of this element is 192.22 amu. This is calculated by taking the weighted average of the masses of the two isotopes, which is (190.9606 x 37.3%) + (192.9629 x 62.7%) = 192.22 amu.

The atomic mass of this element is calculated by taking the weighted average of the masses of the two isotopes.

This means that you multiply the mass of each isotope by its relative abundance (the fraction of that isotope that exists in the element) to get the weighted average mass.

For example, in this case the first isotope has a mass of 190.9606 amu and a relative abundance of 37.3%. This means that the contribution of this isotope to the atomic mass is (190.9606 amu x 0.373) = 70.9043 amu. Similarly, the contribution of the second isotope is (192.9629 amu x 0.627) = 121.3179 amu. When these two contributions are added together you get the atomic mass of 192.22 amu.

Learn more about atomic mass:

https://brainly.com/question/30390726

#SPJ4

When the author states that "on a molecular level, no one compound is grosser than any other," he is suggesting that at the smallest level of matter, which is the molecular level, there is no inherent difference between different compounds.

All compounds are made up of molecules, which are simply collections of atoms. The atoms themselves are made up of protons, neutrons, and electrons, which are all subatomic particles.

Thus, the author is saying that on a molecular level, all compounds are made of the same basic building blocks, and therefore, no one compound is fundamentally different or "grosser" than any other. It could be that the author is trying to make a point about the subjective nature of describing something as "gross" or not, and how this is not a scientifically valid way to measure the properties of a compound.

In summary, the author is pointing out that at the molecular level, all compounds are made up of the same building blocks, and therefore, one compound is not inherently "better" or "worse" than another.

Learn more about  molecular level from

https://brainly.com/question/20455963

#SPJ1

If you have the sample with 2.02 × 10²² H₂O molecules. The number of moles of water in the sample is 3.3 E⁻².

The one moles of the substance = 6.022 × 10²³ molecules

The number of molecules of water = 2.02 × 10²² molecules

The number of the moles of water  is as follows :

The number of the moles of water = 2.02 × 10²² / 6.022 × 10²³ moles

The number of the moles of water = 3.3 × 10⁻² moles

Thus, number of moles of water is  3.3 × 10⁻² moles in 2.02 × 10²² molecules .

In the exponential notation is 3.3 E⁻² .

To learn more about moles here

https://brainly.com/question/30452126

#SPJ4

The density of Carbon-12 nucleus is, [tex]1.21 \times 10^{14} \ g/cm^3[/tex].

Nuclear density states that density of the nucleus of an atom, is the ratio of mass per unit volume inside the nucleus. Since the atomic nucleus carries most of the atom mass and the atomic nucleus is very small in comparison to the entire atom, the nuclear density is very high.

The Volume of nucleus can be determined using the formula,

[tex]V = \dfrac{4}{3} \times \pi \times R^{3}[/tex]

The nuclear radius is [tex]2.70 \times 10^{-13}[/tex] cm.

Volume = [tex]\dfrac{4}{3} \times \pi \times (2.70 \times 10^{-13})^{3}[/tex]

Volume = [tex]82.45 \times 10^{-39} cm^{3}[/tex]

The mass of nucleus is, [tex]1.0 \times 10^{-23}[/tex] g.

Density = [tex]\dfrac{mass}{volume}[/tex]

Density = [tex]\dfrac{1.0 \times 10^{-23}}{82.45 \times 10^{-39}}[/tex]

Density = [tex]1.21 \times 10^{14} \ g/cm^3[/tex]

The density is [tex]1.21 \times 10^{17} \ kg/m^3[/tex]

To know more about the nuclear density, here

brainly.com/question/13266571

#SPJ4

Coders must reference both the alphabetic index and tabular list because the Alphabetic Index does not always give the full code. Referring to the Tabular List to verify that no other character will be required.

It is essential to use both the Alphabetic Index as well as Tabular List when locating and assigning a code. The Alphabetic Index does not provide the full code. Selection of the full code, including laterality and any applicable seventh character, can only done in the Tabular List.

As with the CPT, procedures and services are looked up in the Alphabetic Index, as well as the Tabular List which is used to confirm that the code is most accurate and appropriate one.

To know more about tabular list here

https://brainly.com/question/19250157

#SPJ4

The liters of alcohol that we need to make the solution are: x = 2.4L

To make a 50% alcohol solution from 4 liters of 70% alcohol solution and 18% alcohol solution, you will need to add 2.4 liters of 18% alcohol solution. This can be calculated using the following equation:

4L(70%) + xL(18%) = 5L(50%)

Solving for x:

x = (5L(50%) - 4L(70%)) / 0.18

x = 2.4L

The concentration of a solution is a measure of how much of a solute (the substance being dissolved) is dissolved in a solvent (the liquid or gas in which the solute is dissolved). The concentration of a solution is usually expressed in terms of moles or mass per volume, and it is typically expressed as a percentage or a fraction.

Learn more about solutions of alcohol:

https://brainly.com/question/30221747

#SPJ4

Option (c) is correct. The Hydrogen bond makes the water liquid at room temperature.

The hydrogen bond in water is covalently bonded to the central oxygen atom by a pair of electrons that are shared between them. In water, only two of the six outer-shell electrons of oxygen are used for the purpose of leaving four electrons which are organized into two non-bonding pairs. The four electron pairs surrounded the oxygen tend to arrange themselves as far from each other as possible in order to minimize repulsions between these clouds of negative charge in the water. The water molecule is electrically neutral. The positive and negative charges are not distributed uniformly in water.

To learn more about Hydrogen bonding in water please visit:

https://brainly.com/question/30420706

#SPJ4

The complete question is,

Which of the following factors is responsible for the fact that water is a liquid at room temperature?

a. Covalent bond

b. Ionic bonds

c. Hydrogen bonds

d. Hydrophobic bonding between water molecules

e. The molecular weight of water.

The pH of a 25.0-mL sample of 0.150 M hydrofluoric acid titrated with a 0.150 M NaOH solution after 13.3 mL of base is added is 8.11. This can be calculated using the following equation:

Where Ka is the acid dissociation constant of hydrofluoric acid (3.5 x 10^-4), [H3O+] is the molar concentration of hydrogen ions, and [HF] is the molar concentration of hydrofluoric acid.

Since the volume of the solution is 25.0 mL and the molarity of the hydrofluoric acid is 0.150 M, the molar concentration of hydrofluoric acid is 0.150 M.

After 13.3 mL of NaOH is added, the molar concentration of hydrogen ions is (0.150 M * 13.3 mL) / 25.0 mL = 0.066 M.

Substituting these values into the equation gives: pH = -log10(3.5 x 10^-4 * (0.066 / 0.150)) = 8.11.

Learn more about hydrofluoric acid:

https://brainly.com/question/24030738

#SPJ4

A quantity of 6.023 x [tex]10^{23}[/tex] atoms of an element equals one gram of that element.

The mass of the element is defined as 1 g.atom of the element when its relative atomic mass is represented in grams.

Density = mass / volume.

There are 4 atoms to the unit cell in a fcc.

(4×atomic mass /6.02 x 10^23) = mass of unit cell

(4×106.42 g/mol) / (6.02 x 10^23) = 7.07 x 10^-22 g

Density = mass/volume

? V = mass / density

V = 7.07 x 10^-22 g / 12.0 g/cm³

V = 5.89 x 10^-23 cm³

For the FCC configuration, 4r = a×v2

a = 4r /v2, also V (cell) = a³

a³ = 5.89 x 10^-23 cm³

a = 3.89 x 10^-8 cm

a = 4r /v2 , where r = atomic radius

3.89 x 10^-8 cm = 4r / v2

r = 1.38 x 10-8 cm

1 cm = 1 x 10^10 pm

1.38 x 10^-8 cm × (1 x 10^10 pm / 1 cm) = 138 pm

r = 138 pm.

Learn more about atoms:

brainly.com/question/13654549

#SPJ4

When working in the fume hood, it is important to make an effort to minimize airflow disruption, Only keep items in the hood if they are being used for experiments, Do not store chemicals in the fume hood unless instructed to do so.

When working in a fume hood, the goal is to minimize the disruption of airflow in the hood to help ensure that hazardous chemicals and fumes stay inside the hood and away from the person using it. To do this, you should only keep items in the hood that are actively being used for experiments. Do not store chemicals in the fume hood, unless you have been specifically instructed to do so by a lab supervisor or another authority figure.

To learn more about fume hood, visit:

https://brainly.com/question/29069541#

#SPJ11

The structure of the carbon atom affects the type of bonds it forms because of the number and arrangement of electrons in its outermost energy level, or valence shell. Carbon has four valence electrons and can form strong covalent bonds with other elements to complete its valence shell.

Carbon can form single, double, and triple bonds depending on the number of electrons it shares with another element. In a single bond, carbon shares one pair of electrons with another element. In a double bond, it shares two pairs of electrons, and in a triple bond, it shares three pairs of electrons.

The structure of the carbon atom also determines the geometry of the molecules it forms. For example, in a carbon-carbon single bond, the carbon atoms are held together by a strong sigma bond and have a linear geometry. In a carbon-carbon double bond, the carbon atoms are held together by two strong sigma bonds and one weak pi bond, giving the molecule a bent geometry.

In addition, the ability of carbon to form multiple bonds with other elements, such as oxygen, nitrogen, and sulfur, allows it to form a wide variety of complex and diverse molecules, including sugars, proteins, and oils.

In summary, the structure of the carbon atom, with its four valence electrons, affects the type of bonds it forms and the geometry of the molecules it forms. The versatility of carbon in forming different types of bonds and its ability to form complex molecules are critical to the diversity and complexity of life on Earth.

Learn more about valence shell here:

https://brainly.com/question/17219832

#SPJ4

Fluorine (F), oxygen (O) and nitrogen (N) are more electronegative as compared to carbon.

Hence, the correct options are options a, b and c.

Electronegativity is basically the chemical property that elaborates the tendency of a particular atom atom or a particular functional group to attract the electrons toward itself. The electronegativity of a particular atom is affected by both its atomic no. as well as the distance between its valence electrons and the charged nuclei.

Fluorine has the oxidation number of -1 and has a very small size due to which it is the most electronegative element in the modern periodic table. The electronegativity of oxygen and nitrogen is greater as compared to carbon as they have greater tendency to attract electrons while carbon has a stable state and therefore it is difficult for it to gain 4 electrons.

--The given question is incomplete, the complete question is

"Which atoms would you consider more electronegative than carbon? Mark all that apply:

a. F

b. O

c. N

d. H"--

To know more about electronegative here

https://brainly.com/question/13889165

#SPJ4

Yes, It is true that C2H2O4 is readily soluble in water and it named as oxalic acid.

Oxalic acid can be effectively dissolved by the water molecules around it because it has relatively small molecules and no alkyl chain to lessen its acidic character. This makes it soluble in water. When the hydrogens are separated, the mutual inductive effect of the two carboxyl functional groups aids in stabilising negative charges, favouring this separation. The chemical formula for oxalic acid is HOOC-COOH. In polar solvents like water, it can dissolve into protons and carboxyl groups, which causes it to ionise. The acid becomes soluble as a result of this. Here is how the separation happens is shown below,

HOOC-COOH → COO-COO + 2H+.

To learn more about oxalic acid visit,

https://brainly.com/question/10967292

#SPJ4