When studying astronomy you cannot do experiments scientist make up Servatius and develop explanations to account for the observation here is a list of observation that astronomers make thousands of years ago?

A The ground that we are standing on does not appear to move.

B We see different starts in June and December.

C The Sun moves across the sky.

D Planets appear to wander across the sky.

E The star move together across the sky without wandering.

a. Write the letter of each observation that fits with a geocentric model of the universe.
(There may be more than one.)

b. Write the letter of each observation that fits with a heliocentric model of the universe.
(There may be more than one.)

c. Write the letter of the observation that is explained more simply by the heliocentric model than by geocentric model.

if the moon is relatively far from earth, so that the umbra does not reach earth, someone directly behind the umbra will see an annular solar eclipse.

Due to its opaque nature, the Umbra is the dark portion of the shadow zone where no light from the sun's source can penetrate. When there is an eclipse, these shadows are created.

The moon appears to be much smaller and unable to fully cover the Sun because it is at its farthest distance from Earth during an annular eclipse. As a result, this condition results in the formation of a structure resembling a ring, and the moon's periphery carries light from the sun. The annular lunar eclipse and solar eclipse occur simultaneously.

Learn more about the Solar eclipse here: https://brainly.com/question/1077760

#SPJ4

It will take 472.35 seconds to decrease from 4.00 m to 0.350 m, if it takes 110 seconds to go from 1.0 m to decrease to 0.150 m.

Total distance decrease, d₁ = 1 - 0.150 = 0.85 m

Total time taken to decrease that distance, T₁ = 110 sec

Time taken to decrease unit distance, t₁ = 110/0.85 = 129.4 sec

Now, decrease in distance, d₂ = (4.0 - 0.350) = 3.65 m

Total time requires to decrease that distance, T₂ = 3.65 × 129.4

T₂ = 472.35 sec.

We can also use interpolation method to calculate this:

T₂ = 110 × (4.0 - 0.35)/(1 - 0.150) = 472.35 sec.

To know about interpolation method, here

https://brainly.com/question/23786607

#SPJ4

The stone will rise to a height of about 8 m when it  is thrown upwards with an velocity of 25 m/s at an angle of 30° to the ground.

When a particle is hurled obliquely near the surface of the earth, it travels along a curved path while accelerating continuously in the direction of the planet's center . Such a particle's route is referred to as a projectile.

Acceleration due to gravity = 9.8 m/s²

Initial velocity of the projectile: u = 25 m/s

Angle of projection = 30°

Hence, maximum height obtained by the stone

= (25² × sin²30°)/(2× 9.8) meter

= 7.97 meter

= 8 meter (approx.)

Learn more about projectile here:

https://brainly.com/question/11422992

#SPJ1

Density of a planet is a fundamental property that can be used to infer its composition. The belief that a planet with a density of 3.4 g/cm3 is composed mostly of rock with a little iron is based on scientific observations and measurements.

By studying the properties of objects in our solar system, scientists have determined that rocky planets like Earth have densities that are generally in the range of 3 to 5 g/cm3. Iron, which is denser than rock, will increase the overall density of a planet. Therefore, a density of 3.4 g/cm3 is consistent with a composition that is mostly rock with a small amount of iron.

Additionally, scientists use spectroscopic techniques to study the light that is reflected off a planet's surface. By analyzing the light, they can determine the types of minerals present on the surface. On the basis of these observations, it has been concluded that planets with densities around 3.4 g/cm3 are composed of silicate rocks and possibly a small amount of metal.

To learn more about Density visit:

https://brainly.com/question/29775886#

#SPJ11

This means that the string is vibrating at a fundamental frequency of 340.5 Hz when it is in its first harmonic state.

The fundamental frequency of a string is the lowest frequency at which it vibrates, and is sometimes referred to as the first harmonic. The higher harmonics are integer multiples of the fundamental frequency, so if you know the frequency of one of the higher harmonics, you can find the fundamental frequency.

In this case, you have measured the fourth harmonic, with a frequency of 1,362 Hz. Therefore, the fundamental frequency can be found by dividing the harmonic frequency by the harmonic number:

fundamental frequency = harmonic frequency / harmonic number

fundamental frequency = 1,362 Hz / 4 = 340.5 Hz

The higher harmonics are multiples of the fundamental frequency, so the fourth harmonic will have a frequency of 4 times the fundamental frequency.

Learn more about frequency here:

https://brainly.com/question/6813361

#SPJ4

The process or feature is a carbon dioxide sink in (b). ocean is correct option.

As a result of its interactions with the atmosphere, the ocean stores carbon, so the carbon cycle uses the ocean as a carbon sink. This is how carbon atoms are transported from the Earth to the repeatedly from the Earth to the upper atmosphere. Oceans are one type of carbon sink because they act as a storage space for carbon. due to a variety of biological and physical activities that take place in the region. This is why using the ocean as a carbon sink is the best option.

Carbon is a chemical element with the symbol C and atomic number 6 (from the Latin carbo, meaning "coal"). It has a tetravalent atom, which means that four of its electrons can be used to create covalent chemical bonds. It is nonmetallic.

After hydrogen, helium, and oxygen, carbon is the fourth most prevalent element in the universe by mass and the fifteenth most abundant element in the crust of the Earth.

To know more about  carbon dioxide

https://brainly.com/question/19760665

#SPJ4

The required total flux through the curved side of the cylinder is calculated to be Q/√2∈₀.

On the cylinder's axis, there is a point charge Q.

Length of the cylinder is L.

The cylinder's length is equal to its diameter.

The diagram follows as,

R is the radius of the cylinder.

The cone OABCO forms the following solid angle at O:

dΩ = 2 π (1 - cos θ)

Ф = Q/4π∈₀ dΩ

Ф = Q/4π∈₀ [2π (1 - cos θ)]

Ф = Q/4π∈₀ [2π (1 - cos 45°)]

Ф = Q/2∈₀ (1 - 1/√2)  

where,

∈₀ is permittivity

Due to symmetry, the electric flux for the left surface would be the same.

Consequently, the circular surfaces' electric flux is,

Ф' = 2 Ф = 2 × Q/2∈₀ [1 - 1/√2] = Q/∈₀ [1 - 1/√2]

Gauss law now yields the following total electric flux through the cylinder:

Ф total = Q/∈₀

The total flux through the cylinder is made up of the flux through the two circular surfaces and the curved surface because the cylinder has a curved surface as well as two circular surfaces.

Let Фc be the flux through the curved surface.

Thus we have,  

Ф total = Фc + Ф'

Putting in the values,

Q/∈₀ = Фc + Q/∈₀ [1 - 1/√2]  

Фc = Q/√2∈₀

Thus, the flux through the curved side is Q/√2∈₀.

To know more about flux:

https://brainly.com/question/30390214

#SPJ4

Answer:

6 tiuyeiydtidsrjs

Explanation:

Jfxjtzkgsjtsitdtditd I don't know

A) z =-1.33

history z-score = -4.44; physics z-score = -3.78; The student performed better on the physics test

The z-score is a measure of how many standard deviations a given value is from the mean. To calculate the z-score, you need to subtract the mean from the value and then divide by the standard deviation. In this case, the z-score would be:

[tex]z =\frac{ (55 - 58)}{ 3} \\\\= -1.33.[/tex]

Therefore, the correct answer is A) z =-1.33.

The student got a score of 83 on the history test and 84 on the physics test.

The student performed better on the physics test because they earned a score of 84 on that test, which is higher than the score of 83 they earned on the history test. The difference in scores can be expressed mathematically as follows:

Physics Score - History Score = [tex]84 - 83 = 1[/tex]

This indicates that the student's score on the physics test was higher than their score on the history test by 1 point.

learn more about physics Refer:brainly.com/question/29265478

#SPJ4

The separation between the two charges, each of 2C, should be 0.66 mm.

The electrostatic potential energy U between two point charges q1 and q2 separated by a distance r is given by the equation:

U = k q1 q2 / r

Where k is Coulomb's constant, = 8.99 x 10⁹ Nm²/C²

The electrostatic potential energy between charges of 2C and 2C is the same as that between charges of 2C and 3C separated by a distance of 1.00 mm, we have:

k×2×2/r = k×2×3 / 1.00

r = (2 × 2 × 1) / (2 × 3) = 4/6

r = 0.66 mm

To know more about electrostatic potential energy, here

https://brainly.com/question/29099240

#SPJ4

The final temperature of the gas is 399.76 K when 5000 j of heat is added to two moles of an ideal monatomic gas, initially at a temperature of 500 k and the gas performs 7500 j of work.

The First Law of Thermodynamics states that the change in internal energy (ΔU) of a system is equal to the heat added (Q) minus the work done (W) by the system:

ΔU = Q - W

For an ideal monatomic gas, the change in internal energy (ΔU) can be calculated using the equation:

ΔU = (3/2) ×n× R ×ΔT, where n is the number of moles, R is the ideal gas constant (8.314 J/(mol K)), and ΔT is the change in temperature.

Given: Q = 5000 J (heat added)

W = 7500 J (work done)

n = 2 (number of moles)

Initial temperature (T1) = 500 K

Using the formula,

ΔU = Q - W,

(3/2) ×n× R ×ΔT = Q - W

(3/2) × 2 ×  8.314 × ΔT = 5000 - 7500

ΔT = -100.23 K

so the final temperature T2 = 500 - 100.23

T2 = 399.76 K

Therefore, the final temperature of the gas is 399.76 K.

To know more about thermodynamics, click here:

https://brainly.com/question/31275352

#SPJ12

The y-axis of the spectra shows the relative signal in-tensity, which indicates that the data was acquired at 1.5 Tesla aside from the frequency.

What is frequency?

Frequency can be defined as the number of occurrences of a repeating event per unit of time. It is usually measured in hertz (Hz), which is equal to one cycle per second. Frequency is an important parameter used in science and engineering to specify the rate of vib-ratory phe-nomena, such as electromagnetic waves, sound waves, and mechanical vibrations. Frequency is also used to describe the number of times an event or occurrence takes place over a period of time.

This is because the maximum signal intensity is much higher than that of the other spectra, which suggests that the magnetic field strength was much higher than that of the other spectra. This is consistent with the expected signal intensity for a 1.5 Tes-la magnetic field.

To learn more about frequency

https://brainly.com/question/254161

#SPJ4

We call the path of the sun the ecliptic, we call the constellations that lie along the ecliptic is zodiac constellations.

The zodiac is a band of the sky that is divided into twelve equal sections, each named after a constellation that lies along the ecliptic. These twelve constellations are: Aries, Taurus, Gemini, Cancer, Leo, Virgo, Libra, Scorpius, Sagittarius, Capricornus, Aquarius, and Pisces. The zodiac has been used for thousands of years in astrology, where each of the 12 zodiac signs is associated with specific personality traits and is thought to influence an individual's life and destiny. However, it should be noted that astrology is not scientifically recognized as a valid field of study. In astronomy, the zodiac constellations are important because they are used as a reference frame to describe the positions of the planets and other celestial objects. They are also used to define the plane of the solar system and to measure the position of objects in the sky in terms of their ecliptic longitude. Overall, the zodiac constellations have played a significant role in human culture and continue to be an important part of our understanding of the sky.

To know more about ecliptic please refer: https://brainly.com/question/29481946

#SPJ4

18.There are 799 grams of Bromide in a 10% solution.

19.25g of Bromide is needed to make 250mL of a 10% solution

18.The amount of Bromide in a 10% solution can be calculated by multiplying the concentration (10%) by the total volume (100 mL) of the solution.

10% x 100 mL = 10 mL Bromide

Since 1 mL of Bromide is equal to 79.9 grams, 10 mL of Bromide would be equal to 799 grams.

Therefore, there are 799 grams of Bromide in a 10% solution.

19.To make a 10% solution, 10g of Bromide needs to be dissolved in 100mL of water. Therefore, to make 250mL of a 10% solution, 25g of Bromide needs to be dissolved in 250mL of water.

Mathematically, this can be expressed as:

[tex]10g Bromide * \frac{250mL}{100mL}[/tex][tex]=25g Bromide[/tex]

Thus, 25g of Bromide is needed to make 250mL of a 10% solution.

learn more about concentration Refer:brainly.com/question/30456660

#SPJ4

In the case of fully hydrated concrete, the gel/space ratio would be 0.678 which can be calculated by using the formula.

The gel/space ratio of concrete refers to the ratio of the volume of the solid material (the gel) to the volume of the voids (the space) in the material.

Gel-space ratio = (0.657C)/(0.319C+Wo)

where C is the cement weight measured in grams

Wo is volume of water that is to be mixed

C = 600 gm is value given to us

W0 is product of Water-cement ratio and cement weight

= 0.65 * 600 = 390 ml

Therefore,

Gel-space ratio = (0.657 * 600)/(0.319*600+390) = 0.678

Therefore, gel/space ratio will be 0.678

Learn more about gel/space ratio here:

https://brainly.com/question/14853465

#SPJ4

Answer:

Explanation:

To calculate the gel/space ratio and theoretical strength of a sample of concrete, we need additional information such as the density of the cement, the properties of the aggregate used, and the mix proportions of the concrete (including the amount of aggregate and water).

Without specific information, we cannot accurately calculate the gel/space ratio and theoretical strength. These parameters depend on various factors, including the type and quality of the cement, the aggregate grading, the water-cement ratio, and the curing conditions.

It is important to note that the gel/space ratio represents the ratio of the volume of cementitious gel (hydration product) to the total void space in the concrete mixture. The theoretical strength is influenced by the water-cement ratio, aggregate properties, curing conditions, and other factors.

To provide a meaningful calculation, please provide additional information about the specific mix design, including the properties of the aggregate and the density of the cement, as well as any other relevant details about the concrete mixture.

The rock concert is approximately 1,000,000 times greater in terms of sound pressure level.

The decibel (dB) is a unit used to measure sound pressure level (SPL) or loudness. A difference of 10 dB represents a ten-fold increase in sound pressure level, which corresponds to a perceived doubling of loudness.

A typical rock concert has an SPL of 110 dB, which is 60 dB greater than a normal conversation at 50 dB. To find the ratio of the two SPLs, we can use the formula:

Ratio = 10^(difference in dB/10)

Substituting the values, we get:

Ratio = 10^(60/10) = 10^6 = 1,000,000

So, the SPL of a typical rock concert is 1 million times greater than the SPL of a normal conversation.

You can learn more about sound pressure at

https://brainly.com/question/24039741

#SPJ4

Answer:

hii:))

Explanation:

the mass number of a beryllium atom is 9.012182 u

hope it will help u :)

The intensity of the Sun's radiation at the position of the Earth is approximately 1400 W m-2, which is the total amount of energy that reaches the Earth's surface from the Sun. However, the average power received per unit area of the Earth is only 350 W m-2. This is because the Sun's radiation is not evenly distributed over the Earth's surface.

Some parts of the Earth receive more of the Sun's radiation and some parts receive less. Factors like the Earth's tilt, the atmosphere and clouds, and the Earth's rotation all play a role in determining the amount of solar radiation reaching different areas on the planet. Additionally, the intensity of the Sun's radiation at the position of the Earth is reduced as it passes through the atmosphere, further reducing the amount of energy available for the Earth's surface. Thus, the average power received per unit area of the Earth is only 350 W m-2, significantly lower than the 1400 W m-2 of the Sun's radiation at the position of the Earth.

To learn more about Sun's radiation, visit:

https://brainly.com/question/10080968#

#SPJ11

8. 2055 is the number of 2-liter bottles required to contain the CO2 produced .

Jaguar 30 Hybrid, Cadillac Sedan In a single year, each car covers 15,000 kilometres.39,049,389 litres.874,706,324 is the result of multiplying 47 mol of CO2 by 22.4 l.874,706,324 millilitres.4,373,531,621 litres divided by two .Octane mass of 12 molar: Calculate litres and CO2 particles at STP using 114 g/mol of octane and 1073160900 g of octane.

9,413,692 mol of octane is equal.

105 mol of octane and 114 g of octane per mole. Seven,5309,536 litres. 1,686,933,625 litres are equal to 84 mol of CO2 multiplied by 22.4 litres.

1,686,933,625 Liters divided by two equal 843,466,812.

5 litres My 2009 Mitsubishi Galant produces 843,466,812.5 2-liter bottles worth of CO2, or 1 for every 8 octane, or 8. 2055.

To learn more about co2  please click on below link

https://brainly.com/question/29005883

#SPJ4

An 18 cm aluminum rod with an electrical resistivity of 18 ohm-cm and a 3 cm² cross-sectional area is cut into thirds (6 cm pieces). 18 ohm-cm is the electrical resistivity of each piece.

Electrical resistivity: It is the measure of the resistance offered by the material to allow the current to pass through it.

The resistivity only depends on the temperature of the material and it does not depend on the length, cross-sectional area, or density of the material.   

[tex]R_{0} = \frac{\rho l}{A}[/tex]

     [tex]= \frac{18\ cm \times 6\ cm}{18\ \text{ohm-cm}}[/tex]

     = 6 /ohm-cm

Electrical resistivity = R₀ × Cross sectional area

                                = 6 ohm-cm⁻¹ × 3 cm²

                                = 18 ohm-cm

Hence if an 18 cm aluminum rod with an electrical resistivity of 18 ohm-cm and a 3 cm² cross-sectional area is cut into three pieces of 6 cm each the resistivity still remains 18 ohm-cm as it only depends on temperature.

Learn more about electrical resistivity here: brainly.com/question/13735984

#SPJ4

Complete Question:

An 18 cm aluminum rod with an electrical resistivity of 18 ohm-cm and a 3 cm² cross-sectional area is cut into thirds (6 cm pieces). What is the electrical resistivity of each piece?

(A) 54 ohm-cm

(B) 18 ohm-cm

(C) 3 ohm-cm

(D) 6 ohm-cm

(E) 36 ohm-cm

A sonar echo returns to a submarine 3.80 s after being emitted. Assuming the speed of sound in seawater is 1500 m/s, the distance to the object creating the echo is 5,700 meters (3.80 s * 1500 m/s).

This is because sound waves travel at a constant speed underwater, so the time it takes for the echo to return is directly related to the distance between the submarine and the object creating the echo.  The speed of sound in seawater depends on a few factors, including the temperature, pressure, and salinity of the water, but it's generally accepted that it averages around 1500 m/s.

This means that for every second an echo takes to return, it has traveled 1500 meters away from its source. To calculate the distance to the object creating the echo, you simply multiply the time it takes for the echo to return by the speed of sound in seawater.  

In this example, the echo takes 3.80 seconds to return, so the distance to the object creating the echo is 5,700 meters (3.80 s * 1500 m/s). This calculation assumes the submarine is in the ocean and not in freshwater since the speed of sound varies in different mediums. Fresh water is generally warmer than seawater, so the speed of sound in freshwater is usually faster than it is in seawater.

To know more about sound waves refer to the link  brainly.com/question/21995826

#SPJ4

The frequency of wave remains the same after the light enters a piece of glass.

The quantity of waves which pass a specific place in a predetermined period of time is known as the wave frequency. The hertz (Hz) is the SI unit for wave frequency, and 1 hertz is equivalent to 1 wave crossing a fixed point in 1 second. A wave with a higher frequency has more energy than a wave with a lower frequency of the same amplitude.

Electromagnetic radiation that can be seen by the human eye is known as light or visible light. Typically, visible light is characterised as having wavelengths between 400 and 700 nanometers, or 750 and 420 terahertz, or frequencies between the infrared and the ultraviolet.

To learn more about wave frequency here

brainly.com/question/4066372

#SPJ4

Answer:

Explanation:

Excretory organs in animals vary depending on the species, but some common examples include:

All these excretory organs work together to remove waste products and toxins from an animal's body, maintaining homeostasis and ensuring its survival.

I would choose a vacuum agents with sensors to detect when all squares are cleaned would prevent further movement and maintain a clean state.

Vacuum agents with sensors can be used to detect when all squares of a given area have been cleaned. This would prevent the agent from continuing to move, thus maintaining the clean state. The sensors would detect when the area is clean and the agent would stop moving, ensuring that the area remains clean.

This technology could be extremely useful in keeping homes and businesses clean and tidy. Additionally, this technology could be used to automate cleaning tasks, saving time and effort.

To know more about vacuum, click here.

https://brainly.com/question/13156311

#SPJ4

It's common to say that the average net force acting on an object during a specific period of time produces the concept of impulse. J = Ft is provided as the equation for impulse.

To Learn more About impulse Refer To:

https://brainly.com/question/20586658

#SPJ1

The ball with less mass can acceleration more quickly when both ball have been kicked same force, according to Newton's second law. The soccer with a soccer ball because it accelerates more quickly.

Acceleration seems to be the measure of a change in velocity. Acceleration frequently, though not always, denotes a shift in speed. Even though the direction of it's own motion is fluctuating, an object moving at consistent speed in a circular path is still travelling forward.

A net force affects an object's motion; the more accelerated it undergoes, the greater the overall combined force. Positive net forces are required in order to accelerate at around the same proportion as less supermassive black holes.

Acceleration soccer ball,

a₁ = 3 m/s²

Acceleration of kickball,

a₂ = 5 m/s²

F = m a

m₁ a₁ = m₂ a₂

To know more about acceleration visit:

https://brainly.com/question/20382454

#SPJ1

The variation of potential energy with the distance between two atoms, x, depends on the nature of the interaction between the atoms. As the distance between the atoms decreases from x = ∞ to x = xi.

The potential energy of the system decreases due to the increase in attractive forces between the atoms. This decrease in potential energy is accompanied by an increase in the total force, P, between the atoms.

At x = xe, the potential energy reaches its minimum value, which is the equilibrium distance between the two atoms. At this point, the total force between the atoms is zero, meaning that the attractive forces between the atoms are balanced by the repulsive forces.

The significance of x = xe in terms of the potential energy is that it represents the most stable configuration of the system, where the potential energy is minimized and the system is in a state of mechanical equilibrium. Any deviations from this distance result in an increase in potential energy and a net force acting on the system to bring it back to x = xe.

Learn more about potential energy here

https://brainly.com/question/27028397

#SPJ4

The thermal Doppler broadening at this temperature is the result of molecules undergoing random thermal motion due to thermal energy is [tex]2.2*10^{-4}Hz.[/tex]

This motion causes a broadening of spectral lines, which can be estimated by the equation:

Δν = (2kT/mc2)1/2 ν

Where k is Boltzmann's constant, T is the temperature in Kelvin, m is the mass of the molecule, and c is the speed of light.

the expected thermal Doppler broadening at this temperature is:

 [tex]\frac{(2 * 1.38 * 10^{-23} *300)\frac{1}{2} }{ (3 * 10^{-26} * 3 * 10^{8})\frac{1}{2}} \\\\=2.2 *10^{-4 }Hz.[/tex]

Therefore[tex]2.2*10^{-4}Hz.[/tex] is the expected thermal Doppler broadening at this temperature.

Doppler broadening in atomic physics is the broadening of spectral lines as a result of the Doppler effect brought on by a variation in the velocities of atoms or molecules. Distinct emission (or absorption) particle velocities produce different Doppler shifts, which together have the effect of widening the emission (or absorption) line.

learn more about Doppler broadening Refer:brainly.com/question/26741658

#SPJ4

11.862=5.2033, is the true statement for Jupiter orbits the sun at an average distance of 5.203 au and takes 11.86years to complete each orbit.

Whether Jupiter orbits the Sun at an average distance of 5.203 AU and takes 11.86 years?

The fifth-farthest planet from the Sun and the largest planet in the solar system is Jupiter. Only the Moon, Venus, and occasionally Mars are more brilliant than it, making it one of the brightest objects in the night sky. The character stands for Jupiter.

Jupiter is larger than all the other planets put together, so ancient astronomers named it after the Roman god and heavenly ruler Jove, even though they had no idea of the planet's actual size.

With an average distance from the Sun of 5.203 AU, or 7.783 x 108 km, Jupiter is the fifth planet from the Sun. It orbits the Sun every 11.86 Earth years and rotates incredibly swiftly, once every 9 hours, 50 minutes, and 28 seconds.

Hence,  is the 5th planet from the Sun with an average distance of 5.203 AU and 11.86 years to complete each orbit is True as per above details.

To learn more about relation of Jupiter and Sun from the given link

https://brainly.com/question/503937

#SPJ4

Complete question:

Jupiter orbits the Sun at an average distance of 5.203 AU and takes 11.86years to complete each orbit. Based on these facts, which statement is true?

Jupiter's orbital period is 5.2032 times Earth's orbital period.

5.2032=11.863

11.862=5.2033

So the relation between watt W to volt V and siemans S can be derived as, 1watt = 1 amp × volt and 1 SV = 1 W/V.

Power is measured in watts. It is the current flow of one amp with a voltage of one volt in terms of electromagnetism. Electric potential, electromotive force, and electric potential difference are all measured in units called volts. A clear relationship exists between watt and volt. This suggests that a change in watt value will correspond to a change in volt value.

The relationship between watt and volt in physics is as follows:

1 watt = 1 amp x 1 volt.

1 volt = 1watt/1 amp

Where,

Power is measured in watts.

The unit used to express electric potential is volt.

Current is measured in amperes.

One siemens Volt (SV) equals one ampere, while one Watt per Volt (W/V) equals one ampere in regard to the fundamental unit of [electric current] (amperes). Watts per Volts to siemens Volts

The SI Unit's base unit for measuring electric current is the ampere [Siemens Volts] symbol or acronym: (SV)

Watts for each volt Abbreviation or symbol: (W/V)

Relation between siemens Volts to Watts Per Volts,

1 SV = 1 W/V.

1 × 1 W/V = 1 W per volt.

To learn more about electric current visit,

https://brainly.com/question/2264542

#SPJ4