Fan and water heater are the energy output object(s) work with the solar panel. Therefore, option B and C are correct.
What is solar panel ?Solar panels are devices that capture the sun's rays and convert them into electricity or heat. A solar panel is a collection of solar (or photovoltaic) cells that can be used to generate electricity via the photovoltaic effect.
Once you've determined the voltage and amperage, all you have to do is multiply them. The wattage of your solar panel output should be similar to the solar panel rating as a result.
Thus, option B and C are correct.
To learn more about the solar panel, follow the link;
https://brainly.com/question/14809330
#SPJ1
Given the following list from the activity se- ries of metals (from most active to least ac- tive) K, Na, Al, Mn, Cr, Cd, Co, Pb, Hg which reaction would you NOT expect to occur?
1. Na(s) + Mn2+(aq) → Na+(aq) + Mn(s)
2. Co2+(aq) + Al(s) → Al3+(aq) + Co(s)
3. Cd(s) + Pb2+(aq) → Pb(s) + Cd2+(aq)
4. Al3+(aq) + Cr(s) → Cr3+(aq) + Al(s)
5. All of the listed reactions will occur.
Answer:
Explanation:
According to the activity series of metals, the reaction that would not be expected to occur is:
Al3+(aq) + Cr(s) → Cr3+(aq) + Al(s)
This is because aluminum (Al) is higher on the activity series and is less likely to be oxidized (lose electrons), while chromium (Cr) is lower on the activity series and is more likely to be oxidized. In this reaction, aluminum would have to be oxidized, which is not consistent with its position on the activity series.
All of the other reactions listed are expected to occur because they involve the transfer of electrons from a metal that is lower on the activity series to a metal that is higher on the series.
Explain why phosphorus is a non-conductor of electricity.
HELP ! Pictures down below (70 points)
For a given mass of gas at a constant temperature, when volume decreases pressure increases.
For at a constant temperature, when mass decreases pressure increases.
What is the effect of a decrease in volume on the pressure of gases?According to Boyle's Law, at a constant temperature, the pressure of a gas is inversely proportional to its volume.
Thus, a decrease in the volume of a gas will result in an increase in pressure, assuming that the temperature and amount of gas remain constant.
Assuming that the temperature and volume remain constant, an increase in the mass of a gas will result in an increase in its pressure. This is because as the mass of the gas increases, the number of gas particles also increases, which leads to an increase in the frequency and force of their collisions with the container walls. These increased collisions result in an increase in the pressure of the gas.
Learn more about pressure and volume gases at: https://brainly.com/question/24719118
#SPJ1
Count the number of atoms in the formula: 2Ca(OH)2
Ca atoms
There are
type your answer...
There are
type your answer...
There are type your answer...
O atoms
Hatoms
The total number of atoms is type your answer...
The total number of atoms in the formula is 2 + 4 + 4 = 10 atoms.
What are atoms?
An atom is the basic unit of matter and the defining structure of elements. The term "atom" comes from the Greek word for indivisible, because it was once thought that atoms were the smallest things in the universe and could not be divided.
Atoms are composed of a nucleus, which contains positively charged protons and uncharged neutrons, surrounded by a cloud of negatively charged electrons. The number of protons in an atom's nucleus determines what element the atom is, as each element has a unique number of protons.
To count the number of atoms in the formula 2Ca(OH)2, we need to determine the number of each type of atom present.
In this formula, there are:
2 calcium atoms (Ca)4 oxygen atoms (O)4 hydrogen atoms (H)So, the total number of atoms in the formula is 2 + 4 + 4 = 10 atoms.
https://brainly.com/question/6258301
#SPJ1
For the following equation, assume you started with 15.6g potassium (K). How many moles of potassium oxide would be produced assuming you had unlimited oxygen? ____ K + ____ O2 → _____ K2O
According to the stoichiometry of the given chemical equation, 0.2 moles of potassium oxide would be produced assuming you had unlimited oxygen.
What is stoichiometry?Stoichiometry is defined as the determination of proportions of elements or compounds in a chemical reaction. The relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
In the given equation,156 g potassium gives 188.4 g potassium oxide, thus, 15.6 g will give 15.6×188.4/156=18.84 g potassium oxide which is 18.84/94.2= 0.2 moles.
Thus, 0.2 moles of potassium oxide would be produced assuming you had unlimited oxygen.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ9
At 20°C water has a density of 0.998 g/mL and at 70°C its density is 0.978 g/mL. Based on the definition of density, how can you explain this density difference?
The density is described below, the relationship of density and temperature.
What is density ?
How compact or concentrated anything is is determined by its density. Take two boxes as an illustration, one huge and one little. They both weigh the same, though. This indicates that the small box is more dense than the huge box. Additionally, density conveys how crowded or dense something is.
What is temperature?
In the International System of Units (SI), the kelvin serves as the fundamental measure of temperature. K serves as its symbol. For practical purposes, it is frequently convenient to use the Celsius scale, where 0 °C nearly resembles the freezing point of water and 100 °C signifies the boiling point of water at sea level.
Density = mass / volume
There is no change in mass with temperature.
Volume increases with increases in temperature because kinetic energy of molecules increases with temperature. so the molecules are move away from each other.
So, since density is inversely proportional to volume.
As temperature increases, volume increases thus density increases.
Therefore, The density is described above, the relationship of density and temperature.
Learn more about density from the given link.
https://brainly.com/question/1354972
#SPJ1
A reaction vessel is charged with 0.50 atm of A and 0.130 atm of B. Once the reaction reaches equilibrium, what is the equilibrium partial pressure of B? Kp for this reaction is 67.2
A (g) ⇌ 2 B (g)
If a reaction vessel is charged with 0.50 atm of A and 0.130 atm of B. Once the reaction reaches equilibrium, the equilibrium partial pressure of B is: 5.79 atm.
What is the equilibrium partial pressure of B?To calculate the equilibrium partial pressure of B, we need to use the expression for an equilibrium constant (Kp). The equation for Kp for a reaction of the form A (g) ⇌ 2 B (g) is given by:
Kp = (P_B^2) / (P_A)
Where:
P_A and P_B are the equilibrium partial pressures of A and B, respectively.
Given that the initial pressures of A and B are 0.50 atm and 0.130 atm, respectively, and the value of Kp is 67.2, we can use the above equation to calculate the equilibrium partial pressure of B:
Kp = (P_B^2) / (P_A) = 67.2
P_A = 0.50 atm
Therefore,
(P_B^2) / (0.50 atm) = 67.2
P_B^2 = 67.2 * 0.50 atm = 33.6 atm
P_B = √(33.6 atm) = 5.79 atm
So, the equilibrium partial pressure of B is approximately 5.79 atm.
Learn more about equilibrium partial pressure of B here:https://brainly.com/question/14001401
#SPJ1
1 point
Count the number of atoms in the formula: 3Al2(SO4)3
Al atoms
There are
type your answer...
There are
type your answer...
There are type your answer...
Satoms
O atoms
The total number of atoms is type your answer...
Al atoms: 6, S atoms: 9, O atoms: 36, The total number of atoms is 51.
what is 3Al2(SO4)3 ?
3Al2(SO4)3 is a chemical formula that represents the compound aluminum sulfate. It is also sometimes written as Al2(SO4)3.
Aluminum sulfate is a white crystalline solid that is commonly used in water treatment, as a coagulating agent to remove impurities and suspended solids from water. It is also used in the paper industry, in the production of dyes and pigments, and as a food additive. Aluminum sulfate has a variety of other applications as well, such as in the production of aluminum and in the tanning of leather.
The formula 3Al2(SO4)3 indicates that the compound contains three molecules of aluminum sulfate, with a total of six aluminum atoms and nine sulfate ions. Each aluminum sulfate molecule consists of two aluminum atoms and three sulfate ions.
Al atoms: 6, S atoms: 9, O atoms: 36, The total number of atoms is 51.
To learn more about aluminum sulfate follow the given link: https://brainly.com/question/28299913
#SPJ1
An ___________________ that is useful for living in one type of ______________ may be useless in a different environment.
Organisms must live in a place that has the conditions they need to _____________
Organisms generally have adaptations that allow them to survive in one particular ______________.
An adaptation that is useful for living in one type of environment may be useless in a different environment. Organisms must live in a place that has the conditions they need to survive. Organisms generally have adaptations that allow them to survive in one particular enviroment.
What do adaptations in a particular enviroment mean?The expression adaptations in a particular enviroment mean that these traits are only advantageous regarding the enviroment.
Therefore, with this data, we can see that the adaptations in a particular enviroment can be detrimental or beneficial depending on the enviroment.
Learn more about adaptative features here:
https://brainly.com/question/29594
#SPJ1
What mass of HCl is contained in 45.0 mL of an aqueous HCl solution that has a density of 1.19g cm ^ - 3 and contains 37.21% HCl by mass?
Answer:
0.01999 g
Explanation:
To find the mass of HCl in 45.0 mL of the solution, we need to first find the volume of the solution and then convert that volume to mass.
First, we can convert 45.0 mL to liters by dividing by 1000:
45.0 mL ÷ 1000 = 0.045 L
Next, we can find the mass of the solution by multiplying the volume by the density:
0.045 L × 1.19 g/cm³ = 0.05365 g
Now that we have the mass of the solution, we can find the mass of HCl by multiplying the mass of the solution by the concentration of HCl expressed as a decimal:
0.05365 g × 0.3721 = 0.01999 g
So, there is approximately 0.01999 g of HCl in 45.0 mL of the solution.
Which is NOT a limiting factor when it comes to applying motivation to employees in the hospitality industry?
A limiting factor when it comes to applying motivation to employees in the hospitality industry is Payment structure.
What is the structure?The structure of a essay is straightforward and simple.It typically consists of an introduction, two to three body paragraphs and a conclusion. The introduction should introduce the main topic and provide a brief overview of what will be discussed. The body paragraphs should provide more specific details about the main topic and should include supporting evidence. The conclusion should summarize the essay and provide a final thought or opinion. It is important to keep in mind that the essay should be free of plagiarism, so it is essential to write all content in one’s own words.
To learn more about structure
https://brainly.com/question/20300458
#SPJ1
Which coefficients correctly balance the equation below
KOH+BaCI- -> KCI + Ba(OH)2
2,2,2,1
1,2,1,2
2,1,2,1
2,2,2,1
The coefficients that correctly balance the equation below would be 2,1,2,1. The third option.
Balancing chemical equationsA balanced chemical equation will have an equal number of different atoms in the reactants and in the products, irrespective of whether there is a change of form or otherwise.
Thus, the balanced equation of the reaction whose equation is shown would be: [tex]2KOH+BaCI_2- - > 2KCI + Ba(OH)_2[/tex]
In other words, the coefficients of the correctly balanced equation are 2,1,2,1.
More on balancing equations can be found here: https://brainly.com/question/7522382
#SPJ1
Calculate the quantity of O₂ would be required to generate 13.0 mol of NO₂ in the reaction below assuming the reaction has only 67.1% yield.
2 NO (g) + O₂ (g) → 2 NO₂ (g)
Solving the Question
We're given:
[tex]2 NO_{(g)} + O_{2(g)}\rightarrow 2 NO_{2 (g)}[/tex][tex]n_{NO_2}=13.0\hspace{4}mol[/tex][tex]\%\hspace{4}yield=67.1\%[/tex]First, let's calculate the theoretical yield of NO2.
⇒ [tex]\%\hspace{4}yield=\dfrac{actual\hspace{4}yield}{theoretical\hspace{4}yield}[/tex]
The yield of NO2 we must produce is 13.0 mol.
⇒ [tex]\%\hspace{4}yield=\dfrac{13.0}{theoretical\hspace{4}yield}[/tex]
We're also given that the percentage yield of this reaction is 67.1%.
⇒ [tex]0.671=\dfrac{13.0}{theoretical\hspace{4}yield}[/tex]
⇒ [tex]theoretical\hspace{4}yield=\dfrac{13.0}{0.671}\\\\theoretical\hspace{4}yield=19.3740685544\hspace{4}mol[/tex]
First, construct a mole ratio between O2 and NO2.
From the balanced chemical equation, we know that 1 mol of O2 can produce 2 mol of NO2:
⇒ [tex]\dfrac{n_{O_2}}{1}=\dfrac{n_{NO_2}}{2}[/tex]
We're given that we must theoretically produce 19.3740685544 mol of NO2:
⇒ [tex]\dfrac{n_{O_2}}{1}=\dfrac{19.3740685544}{2}[/tex]
⇒ [tex]n_{O_2}=9.6870342772\hspace{4}mol[/tex]
Round to significant figures (3):
⇒ [tex]n_{O_2}=9.69\hspace{4}mol[/tex]
Answer[tex]n_{O_2}=9.69\hspace{4}mol[/tex]
Which characteristic is not a periodic trend?
A. Atomic radius
B. Electron affinity
C. Ionization energies
D. Number of elements in a group
Answer:
Explanation:
D
(b) Levetiracetam is the (S) enantiomer of the memory-enhancing racemic drug called etiracetam. What do you think inspired the name of levetiracetam?
Since the configuration is such that we call it sinister (left). That inspired the name.
What is stereochemistry?The stereochemistry has to do with the study of the arrangement of the atoms and the groups that are in a compound. In this case, we can see that the compound that we have in the question has an (S) configuration and the meaning of this is that we can be able to arrange the priority groups from the left hand side as shown.
This can now explain to us that since the configuration is sinister then the name of the compound that is under study here can now be called Levetiracetam.
Learn more about stereochemistry:https://brainly.com/question/28658912
#SPJ1
Which group would most benefit from the claim?
O people who sell coffee with caffeine
• people who sell decaffeinated tea
• diners that serve only drinks without caffeine
O manufacturers of caffeine-free bottled fruit juice
The group that would most benefit from the claim is people who sell coffee with caffeine.
What was the claims assertion?Caffeine increases mental alertness, making it ideal for activities related to the workplace because it makes a person more attentive, aware of their surroundings, and better able to keep up with tasks.
Caffeine enhances motor coordination, which is the capacity to coordinate various body parts to produce complicated movements. Among those who are active, the capacity to enhance motor coordination may increase need for caffeine.
The organizations who would gain most from the claim are the dealers in caffeinated items, including; based on the link of caffeine with benefits that are desired by active people (working people who earn income).
Therefore, option A is correct.
Learn more about claim at:
https://brainly.com/question/2748145
#SPJ1
Determine an unknown concentration or volume using an acid–base titration.
Calculate the volume of 2.63×10-2 M barium hydroxide required to neutralize 16.1 mL of a 0.110 M nitric acid solution.
? mL
The volume of 2.63×10-² M barium hydroxide required to neutralize 16.1 mL of a 0.110 M nitric acid solution is 67.34mL.
How to calculate volume?The volume of a substance can be calculated using the following expression:
CaVa = CbVb
Where;
Ca = concentration of acidCb = concentration of baseVa = volume of acidVb = volume of baseAccording to this question, 2.63×10-² M barium hydroxide is required to neutralize 16.1 mL of a 0.110 M nitric acid solution.
0.0263 × Va = 16.1 × 0.110
0.0263Va = 1.771
Va = 67.34mL
Learn more about volume at: https://brainly.com/question/28241684
#SPJ1
Element A + compound B —> element C + compound D
————————————-
What is the reaction type?
Single replacement
Decomposition
Combustion
Synthesis
Double Replacement
Answer:
Single replacement
Explanation:
Answer:
single replacement reaction
Explanation:
This type of reaction, one element is swapped with another element in a compound, leading to the formation of two new compounds. The element A replaces one of the elements in compound B to form element C and compound D.
In a single replacement reaction, the reactants are typically elements in their elemental form and a compound. The element that is replaced is typically one that is more reactive, meaning it has a greater tendency to react and form a new compound. The new compound that is formed is typically more stable, meaning it has a lower tendency to react and form another new compound.
ALLEN
A phosphate-ion (PO43-) level in a water sample is 93.1 ppm (or mg/L). What is the concentration of this phosphate sample in molarity? Density of water is 1 g/mL Note: In the field of water quality, ppm and mg/L are the same unit.
Answer:
The molarity of a solution can be calculated by dividing the number of moles of solute by the volume of the solution in liters. To calculate the number of moles of solute in a solution, we first need to find the mass of the solute.
Since the concentration of the phosphate sample is given in mg/L (ppm), we can convert this to grams by multiplying by 0.001:
93.1 mg/L x 0.001 g/mg = 0.0931 g/L
Next, we can find the number of moles of solute by dividing the mass of solute by its molar mass:
0.0931 g ÷ (1 mol/94 g) = 0.000989 mol/L
Finally, we can find the molarity of the solution by dividing the number of moles of solute by the volume of the solution:
0.000989 mol ÷ (1 L) = 0.000989 M
if 12.0 grams of potassium chlorate decompose how many grams of potassium chloride will be produced?
If 12.0 grams of potassium chlorate decompose, 7.29 grams of potassium chloride will be produced.
What is molar mass ?The term molar mass of a substance is defined as the mass in grams of one mole of the compound. In a substance, the amount of entities present e.g., atoms, molecules, ions, is defined as a mole. A mole of any substance is 6.022×10²³ molecules.
First change 12.0 grams of potassium chlorate to moles.
calculate the gram molecular mass of potassium chlorate.
Chlorine has seven valance electrons when it is saturated six of these electrons are used by oxygen ( 2 electrons per oxygen) leaving only 1 electron.
1 K x 39 grams/mole
+1 Cl x 35.4 grams/ mole
+3 O x 16 grams/ mole
= 122.4 grams / mole Potassium Chlorate
= 12/122.4
= 0.09 moles.
0.09moles of Potassium Chlorate.
There is a 1:1 mole ratio. 1 mole of Potassium Chlorate will produce 1 mole of Potassium Chloride.
0.09 moles of Potassium Chlorate will produce 0.09moles of Potassium Chloride.
Find the gram molecular mass of Potassium Chloride.
1 K x 39 = 39
+1 Cl x 35.4 = 35.4
= 74.4 grams / mole.
0.09 moles x 74.4 grams/ mole
= 7.29 grams
Thus, if 12.0 grams of potassium chlorate decompose, 7.29 grams of potassium chloride will be produced.
To learn more about the molar mass, follow the link;
https://brainly.com/question/12127540
#SPJ1
According
to
the
balanced
reaction
below,
calculate
the
quantity
of
gas
that
form
when
liquid
completely
reacts:
N₂H₄(l)
→
NH₃(g)
+
N₂(g)
STARTING AMOUNT
The stoichiometry can be used to obtain the parameters about a reaction.
How do you use stoichiometry?The question is incomplete but I will show you how to use stoichiometry to obtain the parameters that concern a reaction.
Here are the steps to use stoichiometry in a chemical reaction:
Write a balanced chemical equation: The first step is to write a balanced equation for the chemical reaction, which shows the correct number of atoms of each element involved in the reaction.
Determine the molar ratio: From the balanced equation, determine the molar ratio of the reactants and products by counting the number of moles of each species. This will give you the conversion factor between the reactants and products.
Choose a reactant or product to work with: Choose the reactant or product that you have information about, either the amount or the concentration.
Calculate the number of moles: Using the amount or concentration of the reactant or product, calculate the number of moles of that species.
Use the molar ratio to calculate the other species: Using the molar ratio determined in step 2, calculate the number of moles of the other reactants or products.
Convert moles to the desired units: Finally, convert the number of moles to the desired units, such as mass, volume, or number of particles.
Learn more about stoichiometry:https://brainly.com/question/30215297
#SPJ1
why polonium so easy to kill someone
Answer:
Polonium is a highly radioactive substance, meaning it emits ionizing radiation, which can cause harm to living organisms. When ingested or inhaled, polonium can damage internal organs, including the kidneys, liver, and bone marrow, and cause radiation sickness. This makes it a potent poison and an easy means to kill someone. Because of its toxic nature and the fact that it is not easily detectable, polonium has been used in assassination attempts, making it a dangerous substance to handle or be around.
Explanation:
Answer:
polonium is a highly radioactive and toxic element that can cause severs health problem if ingested or inhaled
Explanation:
A chemist working as a safety inspector finds an unmarked bottle in a lab cabinet. A note on the door of the cabinet says the cabinet is used to store bottles of dimethyl sulfoxide, acetone, diethytamin, tetrahydrofuran, and carbon tetrachloride. The chemist plans to identify the unknown liquid by measuring the density and comparing to known densities. First, from her collection of Material Safety Data Sheets (MSOS), the chemist finds the following information: Next, the chemist measures the volume of the unknown liquid as 0.767 L and the mass of the unknown liquid as 682. g. Calculate the density of the liquid. Round your answer to 3 significant digits. g. cm^-3 Given the data above, is it possible to identify the liquid? yes no If it is possible to identify the liquid, do so. dimethyl sulfoxide acetone diethylamine tetrahydrofuran carbon tetrachloride times 10
Yes, it is possible to identify the liquid, and the density of the liquid is closest to 0.889 g/cm³ so the liquid is most likely tetrahydrofuran.
To calculate the density of the unknown liquid, we use the formula:
Density = Mass / Volume
Substituting the given values, we get:
Density = 682. g / 0.767 L
Density = 888.5 g/L
Rounding to three significant digits, the density of the unknown liquid is 889 g/L.
Using the information provided in the question, we can compare the density of the unknown liquid to the known densities of the listed chemicals. The densities (in g/cm³) of the chemicals are:
Dimethyl sulfoxide: 1.092
Acetone: 0.790
Diethylamine: 0.707
Tetrahydrofuran: 0.889
Carbon tetrachloride: 1.594
Comparing the density of the unknown liquid to the known densities, we see that it is closest to the density of tetrahydrofuran, which is 0.889 g/cm³. Therefore, it is likely that the unknown liquid is tetrahydrofuran.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ4
1.discuss breifly about types of quantum numbers"
Answer:
Explanation:
Quantum numbers are a set of numbers that describe the state of an electron in an atom. There are four types of quantum numbers:
Principal quantum number (n): This quantum number determines the energy level of an electron in an atom. The larger the value of n, the higher the energy level and the farther the electron is from the nucleus.
Azimuthal quantum number (l): This quantum number determines the shape of the electron orbital. The value of l can range from 0 to n-1, and it describes the angular momentum of the electron.
Magnetic quantum number (m): This quantum number determines the orientation of the electron orbital in space. The value of m can range from -l to +l, and it describes the orientation of the orbital.
Spin quantum number (s): This quantum number describes the intrinsic angular momentum, or spin, of an electron. The value of s is always ±1/2.
These four quantum numbers together describe the state of an electron in an atom, including its energy, shape, orientation, and spin. Understanding these quantum numbers is essential for understanding the behavior of electrons in atoms and for predicting the properties of chemical compounds.
What are the differences between an endothermic and exothermic reaction?
Answer:
Exothermic-Producing heat
Endothermic-absorbing heat
Answer:
An endothermic reaction is a chemical reaction that absorbs heat energy, causing the temperature of the system to decrease. An exothermic reaction is a chemical reaction that releases heat energy, causing the temperature of the system to increase.
Explanation:
Only few substances can be used as natural indicators. Why?
Answer:
Only few substances can be used as natural indicators because, some natural indicators do not have chemical properties which can change the color of substances.
Explanation:
Natural indicators are obtained from natural sources such as plants. Some of the common examples of natural indicators include red cabbage, turnip skin, cherries, beetroots and more. The natural indicators will help individuals distinguish if it is a base or an acid.
While calculating the ending amounts of product after an
experiment, Jose found that he had made 0.35 moles of
iron. His goal was to make 40 grams of iron, did he reach
his goal?
Yes, Jose reached his goal.
What is the mole?In chemistry, the mole is a unit used to measure the amount of a substance. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of pure carbon-12. This number is known as Avogadro's number and is approximately equal to 6.022 × 10^23.
The concept of the mole is fundamental to many areas of chemistry, including stoichiometry, the study of chemical reactions and their quantitative relationships. It allows chemists to make precise measurements and calculations, and to compare and relate the properties of different substances.
Number of moles in 40 g of iron = 40g/56 g/mol
= 0.7 moles
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
Use the rate law to quantitatively explain what would happen in the following situations?
a. what would happen to the rate of the reaction if the iodide concentration was doubled?
b. what would happen to the rate of the reaction if the thiosulfate concentration was doubled?
c. what would happen to the rate of the reaction if the persulfate concentration was halved?
d. how would increasing the total volume of the solution affect the actual rate of the iodine clock reaction
A.By using the rate law it was discovered that doubling the concentration of Fe(III) doubled the reaction rate, and doubling the concentration of iodide quadrupled the reaction rate.
What is rate law ?A chemical reaction's rate law is the mathematical relationship between the rate of the reaction and the concentrations of the reactants. The rate law of a chemical reaction is determined by measuring the initial rate of the reaction at various reactant concentrations.
B.Simply changing the concentration of thiosulfate in solution allows us to see how the rate of reaction changes, If the thiosulfate ion concentration is doubled while the rate of reaction remains constant, the reaction is zeroth order in thiosulfate ion concentration.
C. Nothing happen to the rate of the reaction if the per sulfate concentration was halved.
D.The concentrations of all reactants are held constant. The total volume of the solution has no effect on the rate of the iodine clock reaction.
To learn more about the rate law, follow the link;
https://brainly.com/question/30379408
#SPJ9
Compound A + Compound B —> Compound C + Compound D
———
Identify the reaction type
The type of reaction shown is a double displacement reaction.
Types of reactionThe given chemical equation represents a chemical reaction known as a double displacement or metathesis reaction.
In this type of reaction, the cations and anions of two different compounds switch places, resulting in the formation of two new compounds.
In the given equation, Compound A and Compound B react to form Compound C and Compound D by exchanging their respective cations and anions.
More on double replacement reactions can be found here: https://brainly.com/question/29224660
#SPJ1
In the wave models, you imagined adding energy into the wave by moving your arm up and down or back and forth. These are called mechanical waves. Explain how you know that energy traveled from you to your friend. In your answer, identify the medium that the energy traveled through.
The energy traveled from you to your friend through the medium of the air. When you moved your arm, the energy created a vibration in the air which then propagated in all directions. As the wave traveled, it passed through the air and eventually reached your friend, carrying energy with it.
What is energy?Energy is the ability to do work or cause change. It is the capacity to cause motion, to create heat, to transform matter, or to generate electricity. It can come from a variety of sources, such as the sun, wind, water, fossil fuels, nuclear energy, and other renewable sources. Energy can also be stored in batteries or fuel cells. It is a fundamental component of the universe and is essential for life. All life forms require energy to survive and grow, and energy is also necessary for the development of technology. Without energy, the world would not function as it does today.
To learn more about energy
https://brainly.com/question/19666326
#SPJ1
