Answer:
Write a chemical equation for KOH(aq) showing how it is an acid or a base according to the Arrhenius definition.
Express your answer as a chemical equation. Identify all of the phases in your answer.
Write a chemical equation for NH4+(aq) showing how it is an acid or a base according to the Arrhenius definition.
Express your answer as a chemical equation. Identify all of the phases in your answer.
Explanation:
According to this theory, an acid is a substance that is a proton donor when the substance is dissolved in water.
The base is the one that gives OH- ions when dissolved in water.
KOH(aq) is a base.
Because it releases OH- ions when dissolved in water.
[tex]KOH(aq)->K^+(aq)+OH^-(aq)[/tex]
The ammonium ion is an acid.
It can donate a proton when dissolved in water.
[tex]NH_4^+(aq)->NH_3(aq)+H^+(aq)[/tex]
A structural model of retinol is shown below. How many carbon atoms are in
retinol?
А. 14
В. 28
С. 20
D. 5
Answer:
The answer is 20
Explanation:
For which of the following transitions would a hydrogen atom absorb a photon with the longest wavelength?
a. n = 1 to n = 2
b. n = 3 to n = 2
c. n = 5 to n = 6
d. n = 7 to n = 6
Answer:
Hence among the options a and c, option d is that the correct answer because it has rock bottom energy ( as n value increases, energy decreases as energy levels come closer).
Explanation:
The relation between energy and wavelength is:
[tex]\Lambda = hC/E[/tex]
From this equation, it's clear that wavelength and energy are inversely proportional to every other. The Lower the energy of a specific transition, the longest will the wavelength be of that specific transition.
Among the given options, options b and d are often ruled out, since those transitions produce to release of a photon because it is coming down from an excited state.
Design an experiment to demonstrate phototropism.
Answer:
Object: To demonstrate phototropism
equipments: A black box, window with light source, a well watered potted plant.
Experiment: A wellwatered potted plant is placed inside a darkened black box that is having a small window on one side. This is called as phototropic chamber. Window is remain closed for a day the plant shows normal growth.
Whereas if window is opened atwo days it will be found that shoot tip bends and grows towards light proving that it is positively phototropic.
c) Solar energy is the source of all forms of energy.give reasons
Answer:
All energy is made by the sun because without the sun there would be no humans to produce other energy
Explanation:
We use many different forms of energy here on earth, but here’s the thing: almost all of them originate with the sun, not just light and heat (thermal) energy! The law of conservation of energy says that energy can’t be created or destroyed, but can change its form. And that’s what happens with energy from the sun—it changes into lots of different forms:
Plants convert light energy from the sun into chemical energy (food) by the process of photosynthesis. Animals eat plants and use that same chemical energy for all their activities.
Heat energy from the sun causes changing weather patterns that produce wind. Wind turbines then convert wind power into electrical energy.
Hydroelectricity is electrical energy produced from moving water, and water flows because heat energy from the sun causes evaporation that keeps water moving through the water cycle.
Right now, much human activity uses energy from fossil fuels such as coal, oil, and natural gas. These energy sources are created over very long periods of time from decayed and fossilized living matter (animals and plants), and the energy in that living matter originally came from the sun through photosynthesis.
solar panel shows what is the ultimate source of energy
PLEASE HELP FAST!!!
Which of the following is an acid? (3 points)
Be(OH)2
HCl
LiBr
NH3
Answer:
HCl
Explanation:
I took the test :)
Out of the following compounds , HCl is an acid as it has hydrogen as the proton donor.
Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/29796621
#SPJ6
What effect does a high carbon level have on a deep ocean
Explanation:
High carbon concentration in the deep ocean means increased absorption of carbon to the atmosphere resulting to even greater and harmful amounts of carbon in the atmosphere. Therefore we need to keep a close eye of the deep ocean in the quest to monitor and pump out excess carbon from this part of marine life.
Draw the Lewis structure for BrCl3. What are the approximate bond angles about the central atom?
a. 60°.
b. 90°.
c. 109°.
d. 120°.
e. 180°.
Answer:
Explanation:
BrCl₃ is an interhalogen compound with a hybridization of sp³d. The approximate bond angles can be predicted from the structure (attached below). Although, the lewis structure might be predicted to be trigonal bipyramidal from the structure, it is however a T-shaped geometry because of it's two lone pairs.
Also, from the structure attached, it can be predicted that the approximate bond angles about the central atom is 120° (360 ÷ 3) since each of the three chlorine atoms is equally spaced about the central atom.
The Lewis structure for BrCl₃ is attached to the image below. The bond angles around the central atom, bromine (Br), are 90 degrees between the bromine and each chlorine atom. Therefore, option B is correct.
A Lewis structure, also known as an electron-dot structure or Lewis dot structure is a diagram that represents the valence electrons of an atom or molecule.
Bromine (Br) is in Group 7A and has 7 valence electrons, while each chlorine (Cl) atom in Group 7A also has 7 valence electrons.
Br: 1 atom × 7 valence electrons = 7 valence electrons
Cl: 3 atoms × 7 valence electrons = 21 valence electrons
Total valence electrons = 7 + 21 = 28
To learn more about the bond angle, follow the link:
https://brainly.com/question/31324226
#SPJ6
#6 and #7. How many carbon atoms are in a mixture of 7.00 mol c2F2 and 0.400 mol carbon dioxide and also #7
Answer:
#6 8.67x10²⁴ atoms
#7
1. Atom
2. Formula unit
3. Molecule
4. Ion
Explanation:
#6 First we calculate how many carbon moles are there in 7.00 moles of C₂F₂, keeping in mind that there are 2 C moles per C₂F₂ mol:
7.00 mol C₂F₂ * 2 = 14.00 mol CAs for carbon dioxide, there are 0.400 C moles in 0.400 moles of CO₂.
We calculate the total number of C moles:
14.00 mol + 0.400 mol = 14.4 mol CFinally we calculate the number of atoms in 14.4 C moles, using Avogadro's number:
14.4 mol * 6.023x10²³ atoms/mol = 8.67x10²⁴ atoms#7
1. Radon - Atom (Ra)2. Formula unit (It is a crystalline solid, BaBr₂)3. Molecule (NH₃)4. Ion (It has a formal charge, +2)is -2 degrees Fahrenheit warmer or is -17 degrees fahrenheit?
You’re taking a walk on a warm fall morning. The temperature is about 70 degrees Fahrenheit, and you cannot see a cloud anywhere in the sky. You notice that the ground has no dew on it either. This means the
this means that you are wearing warm clothes in warm temperature .quite easy sir
14 protons,14 electrons and 14 neutrons
the answer is silicon!!
A molecule contains hydrogen bonding if it contains hydrogen covalently bonded to Group of answer choices sulfur, oxygen, or fluorine. oxygen or nitrogen. fluorine, oxygen, or nitrogen. nitrogen, fluorine, oxygen, or nitrogen. chlorine, fluorine, or iodine.
Answer: A molecule contains hydrogen bonding if it contains hydrogen covalently bonded to (fluorine, oxygen, or nitrogen)
Explanation:
A hydrogen bond is a strong dipole-dipole attraction which occurs between
--> the hydrogen atom attached to a strongly electronegative atom, and
--> another strongly electronegative atom with a lone pair of electrons.
When an electronegative atom such as fluorine, oxygen or Nitrogen is bonded to hydrogen, a dipole develops causing the hydrogen to be partially negative. The electrostatic attraction between the partially positive hydrogen atom in one molecule and the partially negative atom of the more electronegative element in another molecule gives rise to the strong dipole-dipole attraction called hydrogen bonding.
Hydrogen fluoride, water and ammonia contain the three most electronegative elements, fluorine, oxygen and nitrogen respectively, linked directly to hydrogen. In addition, lone pairs of electrons are present in the fluorine, oxygen and nitrogen atoms of the three hydrides, making hydrogen bonds to form easily between them. These compounds which exhibits hydrogen bonding always have higher melting and boiling points.
Draw the skeletal structure for: (E)-hept-5-en-2-one
Answer:
Draw the skeletal structure for: (E)-hept-5-en-2-one
Explanation:
The root word hept indicates that the given compound has seven carons in its longest chain.
-en- primary suffix indicates that the compound has one double bond in it.
2-one indicates that the compound has -C=O bond in the second carbon.
The prefix (E) indicates that the highest priority groups are on the opposite direction of the double bond.
The structure of the given molecule is:
An ionic compound contains an unknown ion X and has the formula X3N2. Ion X contains 10 electrons. Write down the chemical symbol of X?
Answer:
Mg3N2
Explanation:
it would be magnesium as it would loss to electron so it would have 10 electron. you can see in the picture above .
hope this helps :)
Energy Changes in Reactions
Independent Practice
In a synthesis reaction, one reactant contains 256 J of chemical energy, and one reactant contains 328 J of
chemical energy. The product contains 407 J of chemical energy.
Because energy is conserved, what energy change occurs during the reaction?
A. 177 J of energy is released.
B. 177 J of energy is absorbed.
C. 335 J of energy is released,
D. 335 J of energy is absorbed.
SAVE
SAVE AND CLOSE
Rank the following substances/solutions in order of lowest boiling point to highest boiling point where 1 has the lowest boiling point and 5 has the highest boiling point. pure water; 1.0 m NaCl; 0.5 m KBr, 0.75 m CaCl2; 1.5 m glucose (C6H12O6)
Answer:
1) pure water
2) 0.75 m CaCl2
3) 1.0 m NaCl
4) 0.5 m KBr
5) 1.5 m glucose (C6H12O6)
Explanation:
Boiling point elevation is a colligative property. Coligative properties are properties that depend on the amount of solute present in the system. The boiling point of solvents increase due to the presence of solutes.
The boiling point elevation depends on the number of particles the solute forms in solution and the molality of the solute. The more the number of particles formed by the solute and the greater the molality of the solute, the greater the magnitude of boiling point elevation.
The order of decreasing hoping point elevation is;
1) 0.75 m CaCl2
2) 1.0 m NaCl
3) 0.5 m KBr
4) 1.5 m glucose (C6H12O6)
Which of the following represents a compound?
Na
CO2
Со
Mn
Answer:
CO2
Explanation:
Carbon dioxide is a chemical compound that consists of two oxygen atoms and one carbon atom
Name the compound CuI2
Answer:
Copper iodide. I think
Answer:
copper iodide(Cul2)hope it helps
stay safe healthy and happy..Can someone please please help
Answer:
oxidizer
Explanation:
an example of an oxidizers are oxygen and hydrogen peroxide
Consider the synthesis of water as shown in Model 3. A container is filled with 10,0 g of H, and
5.0 g of Oz
Which reactant (hydrogen or oxygen) is the limiting reactant in this case?
Answer:
Oxygen, O₂ is the limiting reactant
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
2H₂ + O₂ —> 2H₂O
Next, we shall determine the masses of H₂ and O₂ that reacted from the balanced equation. This can be obtained as follow:
Molar mass of H₂ = 2 × 1 = 2 g/mol
Mass of H₂ from the balanced equation = 2 × 2 = 4 g
Molar mass of O₂ = 16 × 2 = 32 g/mol
Mass of O₂O from the balanced equation = 1 × 32 = 32 g
SUMMARY:
From the balanced equation above,
4 g of H₂ reacted with 32 g of O₂.
Finally, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
4 g of H₂ reacted with 32 g of O₂.
Therefore, 10 g of H₂ will react with
= (10 × 32)/4 = 80 g of O₂.
From the calculations made above, we can see that a higher mass (i.e 80 g) of O₂ than what was given (i.e 5 g) is required to react completely with 10 g of H₂. Therefore, O₂ is the limiting reactant.
Oxygen has been the limiting reactant in the reaction.
A limiting reactant can be defined as the reactant in the reaction in which the product concentration has been dependent.
The balanced equation for the formation of water has been:
[tex]\rm 2\;H_2\;+\;O_2\;\rightarrow\;2\;H_2O[/tex]
For the formation of reaction to form 2 moles of water, 2 moles of hydrogen reacts with 1 mole of oxygen.
The moles can be calculated as:
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
The moles of Hydrogen in 10 g [tex]\rm H_2[/tex]:
Moles = [tex]\rm \dfrac{10}{2}[/tex]
Moles of hydrogen = 5 mol.
Moles of Oxygen in 5 grams Oxygen:
Moles = [tex]\rm \dfrac{5}{32}[/tex]
Moles of oxygen = 0.156 mol.
For the reaction with 2 moles of Hydrogen 1 mole of Oxygen has been required.
For reacting with 5 mol of Hydrogen, moles of oxygen required are:
Moles of oxygen = [tex]\rm \dfrac{1}{2}\;\times\;5[/tex]
Moles of oxygen required = 2.5 moles.
The available oxygen = 0.156 moles.
Since the moles of oxygen available is lesser than required, the formation of the product has been dependent on the concentration of the oxygen.
Thus, oxygen has been the limiting reactant in the reaction.
For more information about the limiting reactant, refer to the link:
https://brainly.com/question/14225536
jawbone root nerve cementum blood vessel gum crown Fill in the blanks. 1. The front four teeth on each jaw are called 2. Each tooth is attached to the jawbone with the help of 3. A healthy tooth is held firmly in the jawbone by the 4. Teeth can get spoilt if they are not kept 5. Germs in the mouth feed on sugar and make
Answer:
shduxhheufufffhduduf
How do forces between particles in gases compare to forces in the other states of matter?
The forces in gases are weaker than forces in solids and liquids.
Because they have more kinetic energy that overcomes the force of attraction.
Which factors would increase the rate of a reaction?
1. Lowering the temperature
II. Increasing the concentration of readiants
JUL. Adding a catalyst
I and
Oland
O only
I only
Tony
Next
Adding a catalyst would increase the rate of a reaction
If the volume of the gas is increased to 9.6 L , what will the pressure be?
Select the statement that correctly describes an endothermic process.
a. The enthalpy change for the process is negative.
b. Heat is lost by the system, but work is done on the system.
c. The enthalpy of the products is higher than that of the reactants.
d. The temperature change of the products is greater than that of the reactants.
e. Heat is released by the system, to the surroundings.
Answer:
C. The enthalpy of the products is higher than that of the reactants
Explanation:
An endothermic process is any process with an increase in the enthalpy of the system
The enthalpy of the products is higher than that of the reactants describes an endothermic process. Therefore, option (C) is correct.
What is the endothermic process?An endothermic process can be described as any thermodynamic process with an increase in the enthalpy H of the system. In such a process, a closed system commonly absorbs thermal energy from its surroundings.
An endothermic reaction leads to an increase in the temperature of the system and a decrease temperature of the surroundings. A physical process, such as the melting of ice cubes is an endothermic process.
Whether a process can take place spontaneously depends not only on the enthalpy change but also on the entropy change and absolute temperature.
An endothermic process commonly needs a favorable entropy increase (∆S > 0) in the system. In an endothermic process, the energy of the products is higher than that of the reactants.
Learn more about the endothermic process, here:
https://brainly.com/question/13818956
#SPJ5
Nickel + oxygen = nickel oxide. What is the balanced redox reaction?
Answer:
This is an oxidation-reduction (redox) reaction:
2 Ni0 - 4 e- → 2 NiII
(oxidation)
2 O0 + 4 e- → 2 O-II
(reduction)
Ni is a reducing agent, O2 is an oxidizing agent.
If I have 25g of Sodium, how much Sodium Chloride will I theoretically create?
O 50g NaCl
0 58.3g NaCl
O 63.7g Naci
0 35.4g NaCl
Answer:
64 g
Explanation:
Step 1: Write the balanced equation
2 Na + Cl₂ ⇒ 2 NaCl
Step 2: Calculate the moles corresponding to 25 g of Na
The molar mass of Na is 22.98 g/mol.
25 g × 1 mol/22.98 g = 1.1 mol
Step 3: Calculate the moles of NaCl formed from 1.1 moles of Na
The molar ratio of Na to NaCl is 2:2. The moles of NaCl formed are 2/2 × 1.1 mol = 1.1 mol.
Step 4: Calculate the mass corresponding to 1.1 moles of NaCl
The molar mass of NaCl is 58.44 g/mol.
1.1 mol × 58.44 g/mol = 64 g
The time required to pass one Faraday of electricity through a solution with a current of 0.3A is
Answer:
89.35 hour
Explanation:
Recall :
Charge on 1 electron = 1.6 × 10^-19 C
1 mole contains = 6.023 × 10^23
Therefore, the charge on 1 mole of electron will be :
Charge per electron × 1 mole :
(1.6 × 10^-19) * (6.023 * 10^23) = 96500 C = 1 Farad
1 Farad = 96500 C
Using the formula :
Q = Current(I) * time(t)
Q = I*t
t = Q/I
Current, I = 0.3 A
t = 96500 / 0.3
t = 321666.66 second
t = 321666.66 / 3600 = 89.35 hour
A balloon contains 0.118 mol of gas and has a volume of 2.58 L . If an additional 0.116 mol of gas is added to the balloon (at the same temperature and pressure), what will its final volume be? Can you also show the work so I can understand why is it that answer. thank you
Answer:
v2=5.11L
Explanation:
given
v1=2.58L
N1=0.118mol
N2=0.234
v2=x
according to charles law V1/N1=V2/N2
2.58/0.118=V2/0.234
21.86=V2/0.234
21.86×0.234= v2
5.116L=v2
5.116L is the
answer or u can simplify it and make 5.1 L
if a bottle of vinegar has 4.78g of acetic acid (CH3COOH) per 100.0 g of solution (mixed with water, what is the molarity of the vinegar? Density of the solution is 1.00g/mL.
Answer:
0.796 M
Explanation:
Step 1: Given data
Gravimetric concentration (Cg): 4.78 g%g
Density of the solution (ρ): 1.00 g/mL
Step 2: Calculate the volumetric concentration of the solution (Cv)
We will use the following expression.
Cv = Cg × ρ
Cv = 4.78 g%g × 1.00 g/mL = 4.78 g%mL
Step 3: Calculate the molarity of the solution (M)
The volumetric concentration is 4.78 g%mL, that is, there are 4.78 g of acetic acid per 100 mL of solution. We can calculate the molarity using the following expression.
M = mass solute / molar mass solute × liters of solution
M = 4.78 g / 60.05 g/mol × 0.1 L = 0.796 M
