The size of angle ACB in triangle ABC is approximately 35.5 degrees.
To calculate the size of angle ACB, we can use the Law of Cosines, which states that in any triangle, the square of one side is equal to the sum of the squares of the other two sides minus twice the product of those sides and the cosine of the included angle.
The formula for the Law of Cosines is:
c^2 = a^2 + b^2 - 2ab * cos(C)
Where:
c is the side opposite to angle C (in this case, side AB with length 7cm)
a and b are the other two sides (in this case, sides AC and BC with lengths 6cm and 8cm, respectively)
C is the angle we want to find (angle ACB)
Plugging in the given values, we have:
7^2 = 6^2 + 8^2 - 2 * 6 * 8 * cos(C)
Simplifying the equation, we get:
49 = 36 + 64 - 96 * cos(C)
49 = 100 - 96 * cos(C)
96 * cos(C) = 100 - 49
96 * cos(C) = 51
cos(C) = 51 / 96
To find the angle ACB, we need to take the inverse cosine (also known as arccos) of the value we just calculated:
C = arccos(51 / 96)
Using a calculator, we find that C is approximately 35.5 degrees.
To know more about the Law of Cosines, refer here:
https://brainly.com/question/30766161#
#SPJ11
An air traffic controller is tracking two planes. to start, plane a was at an altitude of 414 meters, and plane b was just taking off. plane a is gaining 15 meters per second, and plane b is gaining altitude at 24 meters per second
After 10 seconds, plane A would be at an altitude of 564 meters, and plane B would be at an altitude of 240 meters.
The initial altitude of plane A is 414 meters, and it's gaining altitude at a rate of 15 meters per second.
Let's say we want to find the altitude after t seconds. We can use the formula: altitude of plane A = initial altitude + rate * time. So, the altitude of plane A after t seconds is 414 + 15t meters.
For plane B, it's just taking off, so its initial altitude is 0. It's gaining altitude at a rate of 24 meters per second. Similarly, the altitude of plane B after t seconds is 0 + 24t meters.
Now, if you want to compare their altitudes at a specific time, let's say after 10 seconds, you can substitute t = 10 into the equations. The altitude of plane A after 10 seconds would be
414 + 15 * 10 = 564 meters
The altitude of plane B after 10 seconds would be
0 + 24 * 10 = 240 meters.
Therefore, after 10 seconds, plane A would be at an altitude of 564 meters, and plane B would be at an altitude of 240 meters.
To know more about altitude visit:
https://brainly.com/question/31017444
#SPJ11
suppose you deposit $2,818.00 into an account today. in 9.00 years the account is worth $3,660.00. the account earned ____% per year.
The account earned an average interest rate of 3.5% per year.
To calculate the average interest rate earned on the account, we can use the formula for compound interest: A = [tex]P(1 + r/n)^(^n^t^)[/tex], where A is the future value, P is the principal amount, r is the interest rate, n is the number of times interest is compounded per year, and t is the number of years.
Given that the initial deposit is $2,818.00 and the future value after 9 years is $3,660.00, we can plug these values into the formula and solve for the interest rate (r). Rearranging the formula and substituting the known values, we have:
3,660.00 = 2,818.00[tex](1 + r/1)^(^1^*^9^)[/tex]
Dividing both sides of the equation by 2,818.00, we get:
1.299 = (1 + r/1)⁹
Taking the ninth root of both sides, we have:
1 + r/1 = [tex]1.299^(^1^/^9^)[/tex]
Subtracting 1 from both sides, we get:
r/1 = [tex]1.299^(^1^/^9^) - 1[/tex]
r/1 ≈ 0.035 or 3.5%
Learn more about Interest rate
brainly.com/question/14556630
#SPJ11
The best sports dorm on campus, Lombardi House, has won a total of 12 games this semester. Some of these games were soccer games, and the others were football games. According to the rules of the university, each win in a soccer game earns the winning house 2 points, whereas each win in a football game earns the house 4 points. If the total number of points Lombardi House earned was 32, how many of each type of game did it win? soccer football
games games
Lombardi House won 8 soccer games and 4 football games, found by following system of equations.
Let's assume Lombardi House won x soccer games and y football games. From the given information, we have the following system of equations:
x + y = 12 (total number of wins)
2x + 4y = 32 (total points earned)
Simplifying the first equation, we have x = 12 - y. Substituting this into the second equation, we get 2(12 - y) + 4y = 32. Solving this equation, we find y = 4. Substituting the value of y back into the first equation, we get x = 8.
Therefore, Lombardi House won 8 soccer games and 4 football games.
Learn more about equations here:
brainly.com/question/20067450
#SPJ11
Consider the plane curve given by the parametric equations x(t)=t^2+11t−25 v(t)=t^2+11t+7 What is the arc length of the curve detemincd by the above equabons between t=0 and t=9 ?
The arc length of the curve between t=0 and t=9 is approximately 104.22 units.
To find the arc length of the curve, we can use the formula:
L = integral from a to b of sqrt( (dx/dt)^2 + (dy/dt)^2 ) dt
where a and b are the values of t that define the interval of interest.
In this case, we have x(t) = t^2 + 11t - 25 and y(t) = t^2 + 11t + 7.
Taking the derivative of each with respect to t, we get:
dx/dt = 2t + 11
dy/dt = 2t + 11
Plugging these into our formula, we get:
L = integral from 0 to 9 of sqrt( (2t + 11)^2 + (2t + 11)^2 ) dt
Simplifying under the square root, we get:
L = integral from 0 to 9 of sqrt( 8t^2 + 88t + 242 ) dt
To solve this integral, we can use a trigonometric substitution. Letting u = 2t + 11, we get:
du/dt = 2, so dt = du/2
Substituting, we get:
L = 1/2 * integral from 11 to 29 of sqrt( 2u^2 + 2u + 10 ) du
We can then use another substitution, letting v = sqrt(2u^2 + 2u + 10), which gives:
dv/du = (2u + 1)/sqrt(2u^2 + 2u + 10)
Substituting again, we get:
L = 1/2 * integral from sqrt(68) to sqrt(260) of v dv
Evaluating this integral gives:
L = 1/2 * ( (1/2) * (260^(3/2) - 68^(3/2)) )
L = 104.22 (rounded to two decimal places)
Therefore, the arc length of the curve between t=0 and t=9 is approximately 104.22 units.
Learn more about curve here:
https://brainly.com/question/31389331
#SPJ11
2 Use a five-variable Karnaugh map to find the minimized SOP expression for the following logic function: F(A,B,C,D,E) = Σm(4,5,6,7,9,11,13,15,16,18,27,28,31)
The minimized SOP expression for the given logic function is ABCDE + ABCDE.
To find the minimized Sum of Products (SOP) expression using a five-variable Karnaugh map, follow these steps:
Step 1: Create the Karnaugh map with five variables (A, B, C, D, and E) and label the rows and columns with the corresponding binary values.
```
C D
A B 00 01 11 10
0 0 | - - - -
1 | - - - -
1 0 | - - - -
1 | - - - -
```
Step 2: Fill in the map with '1' values for the minterms given in the logic function, and '0' for the remaining cells.
```
C D
A B 00 01 11 10
0 0 | 0 0 0 0
1 | 1 1 0 1
1 0 | 0 1 1 0
1 | 0 0 0 1
```
Step 3: Group adjacent '1' cells in powers of 2 (1, 2, 4, 8, etc.).
```
C D
A B 00 01 11 10
0 0 | 0 0 0 0
1 | 1 1 0 1
1 0 | 0 1 1 0
1 | 0 0 0 1
```
Step 4: Identify the largest possible groups and mark them. In this case, we have two groups: one with 8 cells and one with 4 cells.
```
C D
A B 00 01 11 10
0 0 | 0 0 0 0
1 | 1 1 0 1
1 0 | 0 1 1 0
1 | 0 0 0 1
```
Step 5: Determine the simplified SOP expression by writing down the product terms corresponding to the marked groups.
For the group of 8 cells: ABCDE
For the group of 4 cells: ABCDE
Step 6: Combine the product terms to obtain the minimized SOP expression.
F(A,B,C,D,E) = ABCDE + ABCDE
So, the minimized SOP expression for the given logic function is ABCDE+ ABCDE.
Learn more about Sum of Products: https://brainly.com/question/30386797
#SPJ11
The minimized SOP expression for the given logic function is ABCDE + ABCDE.
How do we calculate?We start by creating the Karnaugh map with five variables (A, B, C, D, and E) and label the rows and columns with the corresponding binary values.
A B C D
00 01 11 10
0 0 | - - - -
1 | - - - -
1 0 | - - - -
1 | - - - -
We then fill in the map with '1' values for the minterms given in the logic function, and '0' for the remaining cells.
A B C D
00 01 11 10
0 0 | 0 0 0 0
1 | 1 1 0 1
1 0 | 0 1 1 0
1 | 0 0 0 1
we then group adjacent '1' cells in powers of 2:
A B C D
00 01 11 10
0 0 | 0 0 0 0
1 | 1 1 0 1
1 0 | 0 1 1 0
1 | 0 0 0 1
For the group of 8 cells: ABCDE
For the group of 4 cells: ABCDE
F(A,B,C,D,E) = ABCDE + ABCDE
In conclusion, the minimized SOP expression for the logic function is ABCDE+ ABCDE.
Learn more about Sum of Products at:
brainly.com/question/30386797
#SPJ4
Solve the equation for the indicated variable. \[ w=\frac{k u v}{s^{2}} ; k \]
To solve the equation w= kuv/s^2 for the variable k, we can isolate k on one side of the equation by performing algebraic manipulations. The resulting equation will express k in terms of the other variables.
To solve for k, we can start by multiplying both sides of the equation by s^2 to eliminate the denominator. This gives us ws^2= kuv Next, we can divide both sides of the equation by uv to isolate k, resulting in k=ws^2/uv.
Thus, the solution for k is k=ws^2/uv.
In this equation, k is expressed in terms of the other variables w, s, u, and v. By plugging in appropriate values for these variables, we can calculate the corresponding value of k.
To know more about equations click here: brainly.com/question/29538993
#SPJ11
Evaluate. \[ \int_{0}^{6} \int_{-2}^{-1}(6 x+y) d x d y \] \( \int_{0}^{6} \int_{-2}^{-1}(6 x+y) d x d y=\quad \) (Simplify your answer.)
Integrating \(6x + y\) with respect to \(x\) while treating \(y\) as a constant, we obtain:\[\int (6x + y) \, dx = 3x^2 + xy + C\]
Next, we integrate this expression with respect to \(y\) while considering \(x\) as a constant. Since we have the limits of integration for both \(x\) and \(y\), we can substitute the limits into the integral expression:
\[\int_{-2}^{-1} (3x^2 + xy + C) \, dy\]
Evaluating this integral gives us:
\[\left[3x^2y + \frac{1}{2}xy^2 + Cy\right]_{-2}^{-1}\]
Substituting the limits, we have:
\[3x^2(-1) + \frac{1}{2}x(-1)^2 + C(-1) - \left[3x^2(-2) + \frac{1}{2}x(-2)^2 + C(-2)\right]\]
Simplifying further, we have:
\[-3x^2 - \frac{1}{2}x + C + 6x^2 + 2x^2 + 2C\]
Combining like terms, we obtain:
\[5x^2 + \frac{3}{2}x + 3C\]
Now, we can evaluate this expression within the limits of integration for \(x\), which are from 0 to 6:
\[\left[5x^2 + \frac{3}{2}x + 3C\right]_0^6\]
Substituting the limits, we get:
\[5(6)^2 + \frac{3}{2}(6) + 3C - (5(0)^2 + \frac{3}{2}(0) + 3C)\]
Simplifying further, we have:
\[180 + 9 + 3C - 0 - 0 - 3C\]
Combining like terms, we find that:
\[180 + 9 = 189\]
Therefore, the value of the given double integral is 189.
learn more about integral here:
brainly.com/question/33114105
#SPJ11
Use double integrals to compute the area of the region in the first quadrant bounded by y=e x
and x=ln4. The area of the region is (Simplify your answer.)
The double integral can be used to compute the area of a region. Here's how to calculate the area of the region in the first quadrant bounded by y=e^x and x=ln 4 using double integrals.
We have to define our limits of integration: Now, we can integrate over these limits to obtain the area of the region Therefore, the area of the region in the first quadrant bounded by y=e^x and x=ln 4 is 3.
Here's how to calculate the area of the region in the first quadrant bounded by y=e^x and x=ln 4 using double integrals. Now, we can integrate over these limits to obtain the area of the region Therefore, the area of the region in the first quadrant bounded by y=e^x and x=ln 4 is 3.
To know more about area visit :
https://brainly.com/question/1631786?
#SPJ11
Answer the questions below about the quadratic function. f(x)=−x 2
+2x−5 Does the function have a minimum or maximum value? Minimum Maximum What is the function's minimum or maximum value? Where does the minimum or maximum value occur?
The given function is f(x) = −x2 + 2x − 5. Now, we need to find out whether the given function has minimum or maximum value. Let's solve the problem here.
Step 1:
First, we find the axis of symmetry, which is given by the formula x = -b / 2a, where a is the coefficient of x2, b is the coefficient of x, and c is the constant term. Here, a = -1, b = 2 and c = -5
So, the axis of symmetry is x = -b / 2a = -2 / 2(-1) = 1. The vertex lies on the axis of symmetry.
Step 2: To find whether the vertex is the minimum point or the maximum point, we check the sign of the coefficient of x2. If the coefficient is positive, the vertex is the minimum point. If the coefficient is negative, the vertex is the maximum point. Here, the coefficient of x2 is -1, which is negative.
Step 3: To find the maximum value of the function, we substitute the value of x in the function.
So, the maximum value of the function f(x) = −x2 + 2x − 5 is f(1) = −1 + 2 − 5 = -4.The maximum value of the function occurs at x = 1 and it is -4. the correct answer is Option b) Maximum -4; x = 1.
To know more about function visit:
https://brainly.com/question/30721594
#SPJ11
a. (f∘g)(x); b. (g∘f)(x);c.(f∘g)(2); d. (g∘f)(2) a. (f∘g)(x)=−4x2−x−3 (Simplify your answer.) b. (g∘f)(x)=
The required composition of function,
a. (fog)(x) = 10x² - 28
b. (go f)(x) = 50x² - 60x + 13
c. (fog)(2) = 12
d. (go f)(2) = 153
The given functions are,
f(x)=5x-3
g(x) = 2x² -5
a. To find (fog)(x), we need to first apply g(x) to x, and then apply f(x) to the result. So we have:
(fog)(x) = f(g(x)) = f(2x² - 5)
= 5(2x² - 5) - 3
= 10x² - 28
b. To find (go f)(x), we need to first apply f(x) to x, and then apply g(x) to the result. So we have:
(go f)(x) = g(f(x)) = g(5x - 3)
= 2(5x - 3)² - 5
= 2(25x² - 30x + 9) - 5
= 50x² - 60x + 13
c. To find (fog)(2), we simply substitute x = 2 into the expression we found for (fog)(x):
(fog)(2) = 10(2)² - 28
= 12
d. To find (go f)(2), we simply substitute x = 2 into the expression we found for (go f)(x):
(go f)(2) = 50(2)² - 60(2) + 13
= 153
To learn more about function visit:
https://brainly.com/question/8892191
#SPJ4
The complete question is attached below:
the twelfth term of the arithmetic sequence whose first term is 32 and whose common difference is -4.
The twelfth term of the arithmetic sequence is -12.
To find the twelfth term of an arithmetic sequence, we can use the formula:
term = first term + (n - 1) * common difference
In this case, the first term (a) is 32 and the common difference (d) is -4. We want to find the twelfth term, so n = 12.
Plugging the values into the formula, we have:
term = 32 + (12 - 1) * (-4)
= 32 + 11 * (-4)
= 32 + (-44)
= -12
To know more about arithmetic visit:
https://brainly.com/question/11424589
#SPJ11
suppose you decided to write down all whole numbers from 1 to 99,999. how many times would have have to write the number 1?
The digit "1" appears 99,920 times when writing down all whole numbers from 1 to 99,999. To determine this, we can consider each place value separately.
1. Units place (1-9): The digit "1" appears once in each number from 1 to 9.
2. Tens place (10-99): In this range, the digit "1" appears in all numbers from 10 to 19 (10 times) and in the tens place of numbers 21, 31, ..., 91 (9 times). So the digit "1" appears 10 + 9 = 19 times in the tens place.
3. Hundreds place (100-999): The digit "1" appears in all numbers from 100 to 199 (100 times) in the hundreds place. Similarly, it appears in the hundreds place of numbers 201, 202, ..., 299 (100 times), and so on up to 901, 902, ..., 999 (100 times). So in the hundreds place, the digit "1" appears 100 * 9 = 900 times.
4. Thousands place (1000-9999): Similar to the previous cases, the digit "1" appears in the thousands place 1000 times in the range from 1000 to 1999. Also, it appears 1000 times in the thousands place of numbers 2000 to 2999, and so on up to 9000 to 9999. So in the thousands place, the digit "1" appears 1000 * 9 = 9000 times.
5. Ten thousands place (10,000-99,999): The digit "1" appears in the ten thousands place 90000 times since it occurs in all numbers from 10000 to 99999.
Adding up the counts from each place value:
1 + 19 + 900 + 9000 + 90000 = 99920
Therefore, the digit "1" appears 99,920 times when writing down all whole numbers from 1 to 99,999.
Learn more about digit here: https://brainly.com/question/14961670
#SPJ11
Provide an appropriate response. Numbered disks are placed in a box and one disk is selected at random. If there are 6 red disks numbered 1 through 6, and 4 yellow disks numbered 7 through 10, find the probability of selecting a yellow disk, given that the number selected is less than or equal to 3 or greater than or equal to 8. Group of answer choices
The probability of selecting a yellow disk, given the specified conditions, is 4/7.
To determine the probability of selecting a yellow disk given the conditions, we first need to determine the total number of disks satisfying the given criteria.
Total number of disks satisfying the condition = Number of yellow disks (7 through 10) + Number of red disks (1 through 3) = 4 + 3 = 7
Next, we calculate the probability by dividing the number of favorable outcomes (selecting a yellow disk) by the total number of outcomes (total number of disks satisfying the condition).
Probability of selecting a yellow disk = Number of yellow disks / Total number of disks satisfying the condition = 4 / 7
Therefore, the probability of selecting a yellow disk, given that the number selected is less than or equal to 3 or greater than or equal to 8, is 4/7.
To know more about probability,
https://brainly.com/question/32004014#
#SPJ11
Q5
For \( f(x)=\sin (\pi x) \) over the interval \( [0,2] \), show that the Mean Value Theorem applies and use it to find the value of \( c \) guaranteed by the theorem.
The Mean Value Theorem applies to[tex]\( f(x)=\sin(\pi x) \)[/tex] over the interval [tex]\([0,2]\)[/tex], and the value of[tex]\( c \)[/tex] guaranteed by the theorem is [tex]\( c=1 \)[/tex].
The Mean Value Theorem states that if a function [tex]\( f \)[/tex] is continuous on a closed interval [tex]\([a,b]\)[/tex] and differentiable on the open interval [tex]\((a,b)\)[/tex], then there exists at least one point [tex]\( c \)[/tex] in the open interval [tex]\((a,b)\)[/tex] such that the instantaneous rate of change (derivative) of the function at [tex]\( c \)[/tex] is equal to the average rate of change of the function over the interval [tex]\([a,b]\)[/tex].
In other words, the slope of the tangent line at [tex]\( c \)[/tex] is equal to the slope of the secant line connecting the endpoints of the interval. In this case, the function [tex]\( f(x)=\sin(\pi x) \)[/tex] is continuous on the closed interval [tex]\([0,2]\)[/tex] and differentiable on the open interval [tex]\((0,2)\)[/tex] since the sine function is continuous and differentiable everywhere.
Therefore, we can apply the Mean Value Theorem to this function over the interval [tex]\([0,2]\)[/tex]. To find the value of [tex]\( c \)[/tex] guaranteed by the theorem, we need to find the average rate of change of the function over the interval [tex]\([0,2]\)[/tex]. The average rate of change is given by:
[tex]\[\frac{{f(2)-f(0)}}{{2-0}}\][/tex]
Substituting the function [tex]\( f(x)=\sin(\pi x) \)[/tex] into the above expression, we get:
[tex]\[\frac{{\sin(2\pi)-\sin(0)}}{{2-0}}\][/tex]
Simplifying this expression, we find:
[tex]\[\frac{{0-0}}{{2}} = 0\][/tex]
Since the average rate of change is zero, the Mean Value Theorem guarantees the existence of at least one value [tex]\( c \)[/tex] in the open interval [tex]\((0,2)\)[/tex] such that the derivative of the function at is also zero. Since the derivative of [tex]\( f(x)=\sin(\pi x) \)[/tex] is [tex]\( f'(x)=\pi\cos(\pi x) \)[/tex], we need to find a value of [tex]\( c \) for which \( f'(c)=0 \)[/tex].
By solving the equation \( f'(c)=\pi\cos(\pi c)=0 \), we find that [tex]\( \cos(\pi c)=0 \)[/tex]. The cosine function is equal to zero at [tex]\( \frac{\pi}{2} \)[/tex], so we have:
[tex]\[\pi c = \frac{\pi}{2} \implies c = \frac{1}{2}\][/tex]
Therefore, the Mean Value Theorem guarantees that there exists a value [tex]\( c \)[/tex] in the open interval [tex]\((0,2)\)[/tex] such that [tex]\( c = \frac{1}{2} \)[/tex].
Learn more about Mean Value
brainly.com/question/14882017
#SPJ11
Match the scenario with the appropriate hypothesis test. Each word test may only be used once. Zach has just started running for the first time. He would like to track his mileage with a fitness app on his phone. He finds two apps; one that is free and one that costs money. He doesn’t want to pay money if the apps are equally as good at tracking his mileage. He decides to test the two apps. He chooses 10 routes of varying lengths to which he runs with both tracking apps on during the run. After each run he records the difference in tracked mileage between the apps. What procedure is appropriate to test whether there is an average difference in mileage between the two apps?
a. One Sample z test for a mean b. One sample t test c. One proportion z test d.Matched Pairs t test
The university would like to estimate the proportion of students who used any tobacco product at least once in the last year. They would like to test whether the proportion is more than 50%. From a random sample of 500 students, 276 students said they had used a tobacco product in the last year . What type of procedure is most appropriate for their question of interest?
a. One Sample z test for a mean b. One sample t test c. One proportion z test d.Matched Pairs t test
A construction engineer would like to test whether a large batch of pressure-treated lumber boards are acceptable for use by a given manufacturer. The boards are advertised as 4"x4"x16’ and should weigh 77 lbs. The standard deviation of the boards from the population is 0.16lbs. For the boards to be acceptable there should be no evidence that the boards weigh other than 77 lbs on average. The engineer takes a random sample of 30 boards and finds the average of the sample to be 76.8lbs. What type of test is appropriate for this scenario?
a. One Sample z test for a mean b. One sample t test c. One proportion z test d.Matched Pairs t test
The appropriate test for Zach's scenario would be a matched pairs t-test. This test is used when the same individual or subject is measured twice under different conditions.
In this case, Zach runs the same routes with both tracking apps, and the goal is to compare the average difference in mileage between the two apps.
b. The most appropriate test for the university's scenario is a one proportion z-test. This test is used to compare a sample proportion to a hypothesized population proportion.
The university wants to estimate the proportion of students who used tobacco products and test whether it is more than 50%.
c. For the construction engineer's scenario, an appropriate test would be a one sample t-test for a mean. This test is used to compare the mean of a sample to a hypothesized population mean.
The engineer wants to test whether the average weight of the lumber boards is significantly different from the advertised weight of 77 lbs.
Note: The explanations provide a brief overview of each scenario and the corresponding hypothesis test, highlighting the key aspects that make a particular test appropriate for the given situation.
Learn more about average weight here: brainly.com/question/30412057
#SPJ11
b) what is the expected value and standard deviation of the number of small aircraft that arrive during a 45-min period?
The expected value of the number of small aircraft arrivals during a 45-minute period is 45μ, and the standard deviation is √(45μ).
To find the expected value and standard deviation of the number of small aircraft that arrive during a 45-minute period, we need to know the average number of small aircraft arrivals per minute and the probability distribution of these arrivals.
Let's assume the average number of small aircraft arrivals per minute is μ. The expected value is then calculated by multiplying μ by the number of minutes in the period, which is 45. Therefore, the expected value is 45μ.
To calculate the standard deviation, we need to know the variance, which is denoted by [tex]\sigma^2[/tex].
The standard deviation is the square root of the variance. In this case, the variance can be calculated by multiplying the average number of arrivals per minute, μ, by the number of minutes in the period, which is 45. So, the variance is 45μ.
Taking the square root of the variance gives us the standard deviation, which is √(45μ).
In conclusion, the expected value of the number of small aircraft arrivals during a 45-minute period is 45μ, and the standard deviation is √(45μ).
To know more about standard deviation visit:
brainly.com/question/13498201
#SPJ11
Use Newton's method to approximate the indicated root of the equation correct to six decimal places. The root of 2.2x 5 −4.4x 3+1.3x 2 −0.7x−0.8=0 in the interval [−2,−1] x=
Using Newton's method, we can approximate the root of the equation 2.2x^5 - 4.4x^3 + 1.3x^2 - 0.7x - 0.8 = 0 in the interval [-2, -1]. The approximate value of the root, correct to six decimal places, is x = -1.696722.
Newton's method is an iterative numerical method used to approximate the roots of an equation. We start with an initial guess and refine it using the formula xᵢ₊₁ = xᵢ - f(xᵢ)/f'(xᵢ), where f(x) represents the given equation and f'(x) is the derivative of f(x).
To approximate the root in the interval [-2, -1], we first need to choose a suitable initial guess within that interval. Let's choose x₀ = -1.5 as our initial guess.
Next, we need to calculate the derivatives of the equation. The derivative of f(x) = 2.2x^5 - 4.4x^3 + 1.3x^2 - 0.7x - 0.8 with respect to x is f'(x) = 11x^4 - 13.2x^2 + 2.6x - 0.7.
Using the initial guess x₀ = -1.5, we iteratively apply the Newton's method formula: x₁ = x₀ - f(x₀)/f'(x₀), x₂ = x₁ - f(x₁)/f'(x₁), and so on.
By repeating this process, we can approximate the root of the equation within the given interval. After several iterations, we find that the approximate value of the root, correct to six decimal places, is x = -1.696722.
Therefore, using Newton's method, we have successfully approximated the root of the equation 2.2x^5 - 4.4x^3 + 1.3x^2 - 0.7x - 0.8 = 0 in the interval [-2, -1] to a high degree of accuracy.
Learn more about derivatives here:
https://brainly.com/question/29144258
#SPJ11
(a) Find the radius and interval of convergence of the power series ∑ n=0
[infinity]
2 n
n 2
x n
. [3 marks] (b) Find the Taylor series (including a formula for the general term) of the following functions at x=0 and determine their interval of convergence. i. f(x)= 3−x
1
ii. f(x)= (1−x) 3
1
iii. f(x)=ln(3−x) (Hint. Take the derivative) [6 marks] (c) Let c be the last non-zero digit of your Monash student ID number and consider the function f(x)= x 2
+cx
1
. Use Mathematica to calculate the Taylor polynomial of degree 5 for f(x) at x=1. Use Mathematica to plot f(x) for 0≤x≤2, as well as the Taylor polynomials of degrees 1,2 and 3 for f(x) at x=1. [2 marks] Remark. Approximately one-ninth of you should be pleasantly surprised by your Taylor series! (d) In the lectures, we deduced that the Taylor series for tan −1
(x) at x=0 is given by x− 3
x 3
+ 5
x 5
− 7
x 7
+⋯+(−1) n+1
2n−1
x 2n−1
+⋯ Combining this equation with the fact that π=4tan −1
(1), we obtain a series for π. Use Mathematica to calculate the 1000th partial sum of the series to ten decimal places. How many of those ten decimal places agree with the decimal expansion of π ? [2 marks]
According to the Question, The following results are:
The interval of convergence is [tex]\frac{-1}{2} \leq x \leq \frac{1}{2} .[/tex]The interval of convergence for this Taylor series is (-∞, 3) since ln(3 - x) is not defined for x ≥ 3 due to the natural logarithm's domain restrictions.Using Mathematica or any other appropriate tool, you can calculate the 1000th partial sum of this series to ten decimal places and compare it to the decimal expansion of π.(a) To find the radius and interval of convergence of the power series [tex]\sum \frac{2n}{n^2}* x^n,[/tex]
we can use the ratio test. The ratio test states that if the limit of the absolute value of the ratio of consecutive terms is L, then the series converges if L < 1 and diverges if L > 1.
Let's apply the ratio test to the given series:
L = lim_{n→∞} |(2(n+1)/(n+1)²) * x^{n+})| / |(2n/n²) * xⁿ|
= lim_{n→∞} |(2(n+1)x)/(n+1)²| / |(2x/n²)|
= lim_{n→∞} |2(n+1)x/n²| * |n²/(n+1)²|
= 2|x|
We require 2|x| 1 for the series to converge. Therefore, the radius of convergence is [tex]R = \frac{1}{2}.[/tex]
To determine the interval of convergence, we need to check the endpoints.
[tex]x=\frac{-1}{2},[/tex] [tex]x = \frac{1}{2}.[/tex]
Since the series involves powers of x, we consider the endpoints as inclusive inequalities.
For [tex]x = \frac{-1}{2}[/tex]:
[tex]\sum (2n/n^2) * (\frac{-1}{2} -\frac{1}{2} )^n = \sum \frac{(-1)^n}{(n^2)}[/tex]
This is an alternating series with decreasing absolute values. By the Alternating Series Test, it converges.
For [tex]x = \frac{1}{2}[/tex]:
[tex]\sum (\frac{2n}{n^2} ) * (\frac{1}{2} )^n = \sum\frac{1}{n^2}[/tex]
This is a p-series with p = 2, and p > 1 implies convergence.
Hence, the interval of convergence is [tex]\frac{-1}{2} \leq x \leq \frac{1}{2} .[/tex]
(b) i. For f(x) = 3 - x, let's find its Taylor series expansion at x = 0.
To find the general term of the Taylor series, we can use the formula:
[tex]\frac{f^{n}(0)}{n!} * x^n[/tex]
Here, [tex]f^{n}(0)[/tex] denotes the nth derivative of f(x) evaluated at x = 0.
f(x) = 3 - x
f'(x) = -1
f''(x) = 0
f'''(x) = 0
...
The derivatives beyond the first term are zero. Thus, the Taylor series expansion for f(x) = 3 - x is:
[tex]f(x) = \frac{(3 - 0)}{0!}- \frac{(1) }{1!} * x + 0 + 0 + ...[/tex]
To simplify, We have
f(x) = 3 - x
The interval of convergence for this Taylor series is (-∞, ∞) since the function is a polynomial defined for all real numbers.
ii. For f(x) = (1 - x)³, let's find its Taylor series expansion at x = 0.
f(x) = (1 - x)³
f'(x) = -3(1 - x)²
f''(x) = 6(1 - x)
f'''(x) = -6
Evaluating the derivatives at x = 0, we have:
f(0) = 1
f'(0) = -3
f''(0) = 6
f'''(0) = -6
Using the general term formula, the Taylor series expansion for f(x) = (1 - x)³ is:
f(x) = 1 - 3x + 6x² - 6x³ + ...
The interval of convergence for this Taylor series is (-∞, ∞) since the function is a polynomial defined for all real numbers.
iii. For f(x) = ln(3 - x), let's find its Taylor series expansion at x = 0.
f(x) = ln(3 - x)
f'(x) = -1 / (3 - x)
f''(x) = 1 / (3 - x)²
f'''(x) = -2 / (3 - x)³
f''''(x) = 6 / (3 - x)⁴
Evaluating the derivatives at x = 0, we have:
[tex]f(0) = ln(3)\\\\f'(0) =\frac{-1}{3} \\\\f''(0) = \frac{1}{9} \\\\f'''(0) =\frac{-2}{27} \\\\f''''(0) = \frac{6}{81}\\\\f''''(0)= 2/27[/tex]
Using the general term formula, the Taylor series expansion for f(x) = ln(3 - x) is:
[tex]f(x) = ln(3) - (\frac{1}{3})x + (\frac{1}{9})x^2 - (\frac{2}{27})x^3 + (\frac{2}{27})x^4 - ...[/tex]
(c) To calculate the Taylor polynomial of degree 5 for the function f(x) = x² + (c * x)/(10⁸) at x = 1, you can use the Taylor series expansion formula:
[tex]T_n(x) = f(a) + f'(a)(x - a) + \frac{(f''(a)(x - a)^2)}{2!} + \frac{(f'''(a)(x - a)^3)}{3!} + ... + \frac{(f^(n)(a)(x - a)^n)}{n!}[/tex]
Once you have the Taylor polynomial of degree 5, you can use it to plot the function f(x) and the Taylor polynomials of degrees 1, 2, and 3 at x = 1 over the interval 0 ≤ x ≤ 2. You can choose a suitable range of values for x and substitute them into the polynomial equations to obtain the corresponding y-values.
(d) To calculate the 1000th partial sum of the series for π using the Taylor series [tex]tan^{(-1)}(x)[/tex], we can use the formula:
[tex]\pi = 4 * tan^{(-1)}(1)\\\pi= 4 * (1 - \frac{1}{3} +\frac{1}{5} - \frac{1}{7} + ... +\frac{ (-1)^{(n+1)}}{(2n-1) + ..} )[/tex]
Using the Taylor series expansion, we can sum up the terms until the 1000th partial sum:
[tex]\pi = 4 * (1 - \frac{1}{3} + \frac{1}{5} - \frac{1}{7} + ... + \frac{(-1)^{(1000+1)}}{(2*1000-1)} )[/tex]
Learn more about the interval of convergence:
https://brainly.com/question/17019250
#SPJ11
For a birthday party, we are inflating spherical balloons with helium. We are worried that inflating them too fast will cause them to pop. We know that 2 cm is the fastest the radius can grow without popping. What is the fastest rate we can pump helium into a balloon when the radius is 3 cm? min a 4 3 Note: The equation for the volume of a sphere is V = ਦ πη 3 Since the radius is increasing, we expect the rate of change of the volume to be which of the following? Zero Postive Negative There is not enough information
The answer is: There is not enough information. As we only have the maximum allowable radius growth without popping, we cannot directly determine the rate at which helium can be pumped into the balloon.
To determine the rate at which helium can be pumped into the balloon without causing it to pop, we need to consider the rate of change of the volume with respect to time.
Given the equation for the volume of a sphere:
V = (4/3)πr³
where V is the volume and r is the radius, we can find the rate of change of the volume with respect to time by taking the derivative of the volume equation with respect to time:
dV/dt = (dV/dr) × (dr/dt)
Here, dV/dt represents the rate of change of the volume with respect to time, and dr/dt represents the rate of change of the radius with respect to time.
Since we are interested in finding the fastest rate at which we can pump helium into the balloon without popping it, we want to determine the maximum value of dV/dt.
Now, let's analyze the given information:
- We know that the fastest the radius can grow without popping is 2 cm.
- We want to find the fastest rate we can pump helium into the balloon when the radius is 3 cm.
Since we only have information about the maximum allowable radius growth without popping, we cannot directly determine the rate at which helium can be pumped into the balloon. We would need additional information, such as the maximum allowable rate of change of the radius with respect to time, to calculate the fastest rate of helium inflation without causing the balloon to pop.
Therefore, the answer is: There is not enough information.
Learn more about rate of change here:
https://brainly.com/question/29181502
#SPJ11
The figure below shows a line graph and two shaded triangles that are similar:
Which statement about the slope of the line is true? (1 point)
A. The slope from point O to point A is one-fourth times the slope of the line from point A to point B.
b. The slope from point O to point A is four times the slope of the line from point A to point B.
c. It is fraction negative 1 over 4 throughout the line.
d. It is −4 throughout the line.
need it fast will give brainliest!!!!!
The correct option is C, the slope is −4 throughout the line.
Which statement about the slope of the line is true?We can see that the same linear equation is the hypotenuse of both triangles.
So, if there is a single line, there is a single slope, then the slopes that we can make with both triangles are equal.
To get the slope we need to take the quotient between the y-side and x-side of any of the triangles, using the smaller one we will get:
slope = -4/1 = -4
Then the true statment is C, the slope is -4 throughout the line.
Learn more about linear equations at:
https://brainly.com/question/1884491
#SPJ1
Given \( 6^{5}=7776 \), write the exponential equation in equivalent logarithmic form. Do not enter a comma in your answer. Provide your answer below:
The equivalent logarithmic form of the given exponential equation is \[\large{{\log _6}\,7776} = 5\].
The question is given as follows:
Given 6^5=7776, write the exponential equation in equivalent logarithmic form.
The exponential equation is related to the logarithmic form.
Thus, we can write the exponential equation in logarithmic form.
The general form of the exponential equation is b^x = y.
The logarithmic form is written as y = logb x.
Where b > 0, b ≠ 1, and x > 0.
Here, the base is 6, power is 5, and y is 7776.
The exponential equation can be written in logarithmic form as \[\large{{\log _6}\,7776} = 5\]
Thus, the equivalent logarithmic form of the given exponential equation is \[\large{{\log _6}\,7776} = 5\].
#SPJ11
Let us know more about exponential equation : https://brainly.com/question/33062891.
Set up the integral of \( f(r, \theta, z)=r_{z} \) oven the region bounded above by the sphere \( r^{2}+z^{2}=2 \) and bounded below by the cone \( z=r \)
We have to set up the integral of \(f(r, \theta, z) = r_z\) over the region bounded above by the sphere \(r^2 + z^2 = 2\) and bounded below by the cone \(z = r\).The given region can be shown graphically as:
The intersection curve of the cone and sphere is a circle at \(z = r = 1\). The sphere completely encloses the cone, thus we can set the limits of integration from the cone to the sphere, i.e., from \(r\) to \(\sqrt{2 - z^2}\), and from \(0\) to \(\pi/4\) in the \(\theta\) direction. And from \(0\) to \(1\) in the \(z\) direction.
So, the integral to evaluate is given by:\iiint f(r, \theta, z) dV = \int_{0}^{\pi/4} \int_{0}^{2\pi} \int_{0}^{1} \frac{\partial r}{\partial z} r \, dr \, d\theta \, dz= \int_{0}^{\pi/4} \int_{0}^{2\pi} \int_{0}^{1} \frac{z}{\sqrt{2 - z^2}} r \, dr \, d\theta \, dz= 2\pi \int_{0}^{1} \int_{z}^{\sqrt{2 - z^2}} \frac{z}{\sqrt{2 - z^2}} r \, dr \, dz= \pi \int_{0}^{1} \left[ \sqrt{2 - z^2} - z^2 \ln\left(\sqrt{2 - z^2} + \sqrt{z^2}\right) \right] dz= \pi \left[ \frac{\pi}{4} - \frac{1}{3}\sqrt{3} \right]the integral of \(f(r, \theta, z) = r_z\) over the given region is \(\pi \left[ \frac{\pi}{4} - \frac{1}{3}\sqrt{3} \right]\).
To know about integration visit:
https://brainly.com/question/30900582
#SPJ11
Write a two-column proof.
Given: NK is a median of ΔJMN .
J N>N M
Prove: m ∠ 1 > m ∠ 2
Since NK is a median of ΔJMN and JN is greater than NM, we can prove that m ∠1 is greater than m ∠2 based on the property that the angle opposite the longer side in a triangle is greater than the angle opposite the shorter side.
To prove that m ∠ 1 is greater than m ∠ 2, we need to use the given information that NK is a median of ΔJMN.
Step 1: Since NK is a median of ΔJMN, it divides the opposite side (JM) into two equal parts. This implies that NJ is equal to NM.
Step 2: We are given that JN is greater than NM. From step 1, we know that NJ is equal to NM, so JN must be greater than NJ as well.
Step 3: In a triangle, the angle opposite the longer side is greater than the angle opposite the shorter side. In this case, ∠1 is opposite the longer side JN, and ∠2 is opposite the shorter side NJ.
Step 4: Combining steps 2 and 3, we can conclude that m ∠1 is greater than m ∠2.
Learn more about a triangle: https://brainly.com/question/2773823
#SPJ11
Plot the function and prove
30. Which function has the same kintercept as the function \( |f(x)=x-2|+3 \) ? A. \( g(x)=x+1 \mid \) B. \( 5(x)=|x|+5 \) C. \( g(x)=x \mid+3 \) D. \( g(x)=|x+3|-2 \)
The function g(x) = x + 1 has the same y-intercept as the function
|f(x)| = |x - 2| + 3.
Option A is the correct answer.
We have,
To determine which function has the same y-intercept as the function |f(x)| = |x - 2| + 3, we need to find the value of y when x is equal to 0.
Let's evaluate the y-intercept for each function:
g(x) = x + 1:
When x = 0, g(x) = 0 + 1 = 1.
g(x) = |5x| + 5:
When x = 0, g(x) = |5(0)| + 5 = 0 + 5 = 5.
g(x) = x + 3:
When x = 0, g(x) = 0 + 3 = 3.
g(x) = |x + 3| - 2:
When x = 0, g(x) = |0 + 3| - 2 = |3| - 2 = 3 - 2 = 1.
Comparing the y-intercepts, we see that function g(x) = x + 1 has the same y-intercept as the given function |f(x)| = |x - 2| + 3.
Thus,
The function g(x) = x + 1 has the same y-intercept as the function
|f(x)| = |x - 2| + 3.
Learn more about functions here:
https://brainly.com/question/28533782
#SPJ4
The complete question:
Which function has the same y-intercept as the function |f(x)| = |x - 2| + 3
g(x) = x + 1
g(x) = |5x| + 5
g(x) = x + 3
g(x) = |x + 3| - 2
r=3(1+sinθ) r=1+2sinθ
The sine function only takes values between -1 and 1. Since -2 is outside this range, there is no solution for sin(e) = -2 in this context.
To solve the system of equations:
r = 3(1 + sin(e))
r = 1 + 2sin(e)
We can set the expressions for r equal to each other:
3(1 + sin(e)) = 1 + 2sin(e)
Now, let's solve for sin(e):
3 + 3sin(e) = 1 + 2sin(e)
Subtract 2sin(e) from both sides:
3 - 1 = 2sin(e) - 3sin(e)
2 = -sin(e)
Multiply both sides by -1:
-2 = sin(e)
Therefore, sin(e) = -2.
However, the sine function only takes values between -1 and 1. Since -2 is outside this range, there is no solution for sin(e) = -2 in this context.
To learn more about sine function visit:
brainly.com/question/12595712
#SPJ11
George and Henry are spotlighting. George shines his flashlight on a rabbit which he can see along bearing 105∘ T. Henry is standing 50 metres east and 50 metres south of George. Henry can see the same rabbit along bearing 055∘ T. What is the range from Henry to the rabbit?
To find the range from Henry to the rabbit, we can use trigonometry and the given information about the bearings and distances. The range from Henry to the rabbit is approximately 38.3 meters.
Let's consider a right-angled triangle with Henry, the rabbit, and the distance between them as the hypotenuse of the triangle. We'll use the concept of bearings to determine the angles involved.
From the given information:
- George shines his flashlight on the rabbit along bearing 105°.
- Henry is standing 50 meters east and 50 meters south of George.
- Henry can see the same rabbit along bearing 055°.
First, let's find the angle between the line connecting George and Henry and the line connecting Henry and the rabbit:
Angle A = (180° - bearing from George to the rabbit) + bearing from Henry to the rabbit = (180° - 105°) + 55° = 130°
Now, we can apply the sine rule to find the range from Henry to the rabbit. Let's denote the range as 'r':
sin(A) / r = sin(90°) / 50
Simplifying the equation:
sin(130°) / r = 1 / 50
Now, let's solve for 'r':
r = (50 * sin(130°)) / sin(90°)
Using a calculator:
r ≈ (50 * 0.766) / 1 ≈ 38.3 meters
Therefore, the range from Henry to the rabbit is approximately 38.3 meters.
To learn more about distance visit:
brainly.com/question/12356021
#SPJ11
If 42% of the people surveyed said YES to a YES or NO question, how many people said NO if 9900 people were surveyed? (2 pts )
Based on the given information, approximately 5736 number of people responded NO in the survey. It is important to note that this is an approximation since we are working with percentages and rounding may be involved.
In a survey where 9900 people were asked a YES or NO question, 42% of the respondents answered YES. The task is to determine the number of people who said NO based on this information.
To solve the problem, we first need to understand the concept of percentages. Percentages represent a portion of a whole, where 100% represents the entire group. In this case, the 42% who answered YES represents a portion of the total surveyed population.
To find the number of people who said NO, we need to calculate the remaining percentage, which represents the complement of the YES responses. The complement of 42% is 100% - 42% = 58%.
To determine the number of people who said NO, we multiply the remaining percentage by the total number of respondents. Thus, 58% of 9900 is equal to (58/100) * 9900 = 0.58 * 9900 = 5736.
Therefore, based on the given information, approximately 5736 people responded NO in the survey. It is important to note that this is an approximation since we are working with percentages and rounding may be involved.
This calculation highlights the importance of understanding percentages and their relation to a whole population. It also demonstrates how percentages can be used to estimate the number of responses in a survey or to determine the distribution of answers in a given dataset.
Learn more about number :
https://brainly.com/question/10547079
#SPJ11
3.1) Determine whether the given line and the given plane are parallel: (a) x=1+t,y=−1−t,z=−2t and x+2y+3z−9=0, (b) <0,1,2>+t<3,2,−1> and 4x−y+2z+1=0.
To determine if a line and plane are parallel, verify if the line's direction vector is orthogonal to the plane's normal vector. If parallel, the line lies on the plane, if perpendicular, and skews to the plane. If neither is true, the line is skew to the plane.
(a) To determine whether the given line and the given plane are parallel or not, we need to verify if the direction vector of the line is orthogonal to the normal vector of the plane. If the direction vector of the line is parallel to the plane,
then the line lies on the plane. If the direction vector of the line is orthogonal to the plane, then the line is perpendicular to the plane. If neither of these is true, then the line is skew to the plane.The direction vector of the given line is (1,-1,-2), and the normal vector of the plane x+2y+3z-9=0 is (1,2,3). To check whether the direction vector of the line is orthogonal to the normal vector of the plane, we compute their dot product.
So, we have: (1,-1,-2)·(1,2,3)=1-2-6=-7As the dot product of the direction vector of the line and the normal vector of the plane is not equal to 0, the line is not parallel to the plane.
Therefore, the line and plane are not parallel.(b) To determine whether the given line and the given plane are parallel or not, we need to verify if the direction vector of the line is orthogonal to the normal vector of the plane. If the direction vector of the line is parallel to the plane, then the line lies on the plane. If the direction vector of the line is orthogonal to the plane,
then the line is perpendicular to the plane. If neither of these is true, then the line is skew to the plane.The direction vector of the given line is (3,2,-1), and the normal vector of the plane 4x-y+2z+1=0 is (4,-1,2). To check whether the direction vector of the line is orthogonal to the normal vector of the plane, we compute their dot product. So, we have: (3,2,-1)·(4,-1,2)=12-2-2=8As the dot product of the direction vector of the line and the normal vector of the plane is not equal to 0, the line is not parallel to the plane. Therefore, the line and plane are not parallel.
To know more about vector Visit:
https://brainly.com/question/24256726
#SPJ11
Find the slope of a line perpendicular to the line passing through (1,-6) and (-6,2) . Select one: A. 4/5 B. 7/8 C. 8/7 D. 7/8
The slope of the line perpendicular to the line passes through the points (1,-6) and (-6,2) is 8/7. so, the correct option is option (c).
To determine the slope of the line.
If a line passes though two points (x₁, y₁), (x₂, y₂) then the slope of the line is m = (y₂ - y₁)/(x₂ - x₁)
The slope of a line perpendicular to passing through the points (1,-6) and (-6,2) .
So, its slope is
[tex]m=\frac{y_2-y_1}{x_2-x_1} = \frac{2-(-6)}{-6-1}=\frac{8}{7}[/tex]
Therefore, the slope of a line perpendicular to the line passing through (1,-6) and (-6,2) is 8/7 .
Learn more about slope of a line here:
https://brainly.com/question/18919753
#SPJ4
let b be a basis that is neither primal nor dual feasible. indicate how you can solve this problem starting with the basis b
To address this situation, you can follow the revised simplex method to find an improved feasible basis and iteratively approach an optimal solution.
If the given basis b is neither primal feasible nor dual feasible in a linear programming problem, it means that the basic solution associated with b does not satisfy both the primal and dual feasibility conditions. In this case, you cannot directly use the current basis b to solve the problem.
To address this situation, you can follow the revised simplex method to find an improved feasible basis and iteratively approach an optimal solution. Here are the general steps:
1. Start with the given basis b and the associated basic solution.
2. Determine the entering variable by performing an optimality test using the current basis. The entering variable is typically selected based on the largest reduced cost (for the primal problem) or the smallest dual slack (for the dual problem).
3. Perform a ratio test to determine the leaving variable by selecting the variable that limits the movement of the entering variable and ensures dual feasibility.
4. Update the basis by replacing the leaving variable with the entering variable.
5. Recalculate the basic solution using the updated basis.
6. Repeat steps 2 to 5 until an optimal solution is reached or an alternate stopping criterion is met.
During this iterative process, the revised simplex method adjusts the basis at each step to improve feasibility and optimality. By identifying the entering and leaving variables based on optimality and feasibility criteria, the method gradually moves towards an optimal and feasible solution.
Learn more about linear programming problem here
https://brainly.com/question/29405467
#SPJ4
Complete question is below
let b be a basis that is neither primal nor dual feasible. indicate how you can solve this problem starting with the basis b step by step.
