The annual payment amount after deferring the first payment to 4 years would be $1,340.44.
Given that, the Principal amount = $10,183
Number of payments, n = 5
Interest rate = 13% annual compound interest
Since the payment amount is the same every year, we can use the formula for the present value of an annuity to find it.
The present value of an annuity is given as:
P = R [1 - (1 + i)^(-n)]/ i...[1]
Where,
P = Present value of the annuity
R = Annual payment
i = Interest rate
n = Number of payments
From formula [1], the annual payment can be written as:
R = Pi / [1 - (1 + i)^(-n)]...[2]
Where,
P = Principal amount
i = Interest rate
n = Number of payments
Substituting the values in equation [1],
P = $10,183
i = 13% annual compound interest
n = 5 payments
Plugging in the values,
R = $10,183 (0.13) / [1 - (1.13)^(-5)]
≈ $3,028.55
To find the annual payment amount if the first payment is deferred to 4 years later, we need to find the present value of the annuity after 4 years has elapsed.
From the given information, we can see that the present value of the annuity is the same as the original loan amount, which is $10,183.
To calculate the annual payment amount, we use the present value of the annuity and the remaining term to calculate the payment amount using equation [2].
Using the formula for the present value of an annuity:
P = R [1 - (1 + i)^(-n)]/ i$10,183
= R [1 - (1 + 0.13)^(-5+4)]/ 0.13R
= $10,183 (0.13) / [1 - (1.13)^(-1)]
≈ $1,340.44
Therefore, the annual payment amount after deferring the first payment to 4 years would be $1,340.44.
To know more about compound interest, visit:
https://brainly.com/question/14295570
#SPJ11
Question 3 Discuss with necessary diagram(s) how the long run equilibrium is achieved in a perfectly competitive market.
In a perfectly competitive market, a long-run equilibrium is achieved when the market demand curve is equal to the market supply curve, and firms earn normal profits. Here’s how the long-run equilibrium is achieved in a perfectly competitive market
Long-run equilibrium in a perfectly competitive marketA perfectly competitive market is where there are a large number of buyers and sellers of a homogeneous product. Each firm in the market has no market power, meaning that they cannot influence the price of the product. The market price is set by the intersection of market demand and supply, and firms take this price as given.The long-run equilibrium of a perfectly competitive market is reached when the following conditions are met: 1. All firms in the market are operating at minimum efficient scale (MES), which means that they are producing at the lowest point on their long-run average total cost (LRATC) curve. 2. There is no incentive for firms to enter or exit the market. 3. Firms in the market are earning normal profits, which means that they are earning a return on their investment that is equal to the opportunity cost of capital (the return they could earn in their next best alternative).4. The market demand curve is equal to the market supply curve.The diagram below illustrates the long-run equilibrium in a perfectly competitive market:Image credit: Introduction to Microeconomics by OpenStax, CC BY 4.0In the diagram above, the market demand curve (D) intersects the market supply curve (S) at point E, which determines the market price (P*). At this price, each firm in the market produces the quantity Q*, which is where its long-run average total cost curve (LRATC) is at its minimum point. This is the point where the firm is producing at the most efficient level, and there is no incentive for new firms to enter the market or for existing firms to exit the market. As a result, all firms in the market earn normal profits.
To know more about equilibrium , visit ;
https://brainly.com/question/517289
#SPJ11
Consider two hypothetical firms, Sony and JVC, which compete in the same industry. Both firms are considering investing in an innovation project that involves a developing a new product. Each firm has two possible strategies: 'Innovate' and 'Do not innovate'. If both firms decide to innovate, the payoffs are low as the market is not large enough for both innovations to be profitable. If one firm innovates and the other does not, the former earns more profit while the latter loses profit. The matrix below describes the hypothetical payoffs. Sony Innovate Do not innovate -0.5 0 -0.5 0 Find the Nash equilibrium(s) of this game. Provide your reasoning by referring to the payoff matrix above. Your reasoning must include the best responses of each firm. Question 8 [Max 200 words, 6 marks] Keep considering the same game and the payoff matrix from the previous question. Discuss whether the game between Sony and JVC is an invisible hand game. Your discussion must start by explaining what an invisible hand game is. JVC Innovate Do not innovate -1.0 -1.0 2 2
To find the Nash equilibrium(s) in this game between Sony and JVC, we need to identify the best response of each firm given the strategies chosen by the other firm. The Nash equilibrium occurs when no player has an incentive to unilaterally change their strategy.
Looking at the payoff matrix:
Sony:
- If JVC innovates, Sony's best response is to not innovate (payoff of 0).
- If JVC does not innovate, Sony's best response is to innovate (payoff of -0.5).
JVC:
- If Sony innovates, JVC's best response is to not innovate (payoff of 2).
- If Sony does not innovate, JVC's best response is to not innovate (payoff of -1).
Considering these best responses, we can identify the Nash equilibrium(s) by finding the intersection of the best responses for both firms.
In this case, the Nash equilibrium occurs when Sony chooses to innovate, and JVC chooses not to innovate. This results in payoffs of -0.5 for Sony and 2 for JVC, which are the highest possible payoffs for each firm given the choices of the other firm. Any unilateral deviation from this strategy would result in a lower payoff for the deviating firm.
Moving on to the second part of the question:
An invisible hand game refers to a situation in game theory where individual actions, driven by self-interest, lead to an overall socially optimal outcome. In such a game, the pursuit of self-interest by individual players indirectly benefits the collective or society as a whole.
In the game between Sony and JVC, we do not have an invisible hand game. The reason is that both firms choosing to innovate does not lead to a socially optimal outcome. In this scenario, the market is not large enough for both innovations to be profitable, resulting in low payoffs for both firms. The socially optimal outcome would be for one firm to innovate while the other does not, which would lead to higher profits for the innovating firm and avoid unnecessary duplication of efforts.
Therefore, the game between Sony and JVC is not an invisible hand game as the pursuit of individual self-interest does not lead to the socially optimal outcome.
To know more about Nash equilibrium visit-
brainly.com/question/28903257
#SPJ11
using the information below, calculate the cost of goods manufactured for the period: beginning raw materials inventory $ 37,000 ending raw materials inventory 28,600 beginning work in process inventory 67,000 ending work in process inventory 76,000 beginning finished goods inventory 98,000 ending finished goods inventory 79,000 cost of goods sold for the period 552,000 sales revenues for the period 1,266,000 operating expenses for the period 244,000
Cost of Goods Manufactured (COGM) refers to the total cost of manufacturing finished goods. It comprises the cost of direct materials used, direct labor and factory overhead, and is calculated to determine the value of inventory production for a specific period.
Calculating Cost of Goods ManufacturedBeginning Raw Materials Inventory = $37,000Ending Raw Materials Inventory = $28,600Direct Materials Purchased = $37,000 - $28,600 = $8,400Direct Materials Used in Production = $8,400 + (Total Raw Materials) - $37,000 = $28,800Beginning Work in Process (WIP) Inventory = $67,000Ending Work in Process (WIP) Inventory = $76,000Direct Labor Used = Total Manufacturing Cost - Overhead - Direct Materials = COGM - Overhead - Direct MaterialsDirect Labor Used = $190,000Beginning WIP + Direct Materials Used + Direct Labor Used + Manufacturing Overhead = COGMManufacturing Overhead = Total Manufacturing Cost - Direct Materials - Direct LaborManufacturing Overhead = $256,000COGM = $67,000 + $28,800 + Direct Labor Used + $256,000COGM = $67,000 + $28,800 + ($190,000 - $256,000) = $29,800Therefore, the cost of goods manufactured for the period is $29,800.
To know more about gross profit visit:
https://brainly.com/question/30355132
#SPJ11
Current stage of Cadbury Dairy Milk development. Explain
Cadbury Dairy Milk is currently in a mature stage of development. It is an established and well-known brand in the market, with a strong presence and a loyal customer base. The focus is on maintaining market share, sustaining profitability, and adapting to changing consumer preferences and trends.
Cadbury Dairy Milk has been in the market for many years and has achieved a significant level of market penetration. It has established itself as a leading brand in the chocolate industry, known for its high-quality products and iconic taste. The brand has built a loyal customer base through effective marketing strategies and continuous product innovation. In the current stage of development, Cadbury Dairy Milk's primary focus is on maintaining its market share and sustaining profitability. This involves strategic brand management, consistent product quality, and effective distribution channels to ensure widespread availability. The company also adapts to changing consumer preferences and market trends by introducing new flavors, variations, and packaging options to cater to diverse consumer demands. Additionally, Cadbury Dairy Milk continues to invest in marketing and advertising campaigns to reinforce brand loyalty and attract new customers. The company also engages in corporate social responsibility initiatives to enhance its reputation and connect with consumers on a deeper level. Overall, Cadbury Dairy Milk's current stage of development as a mature brand involves a combination of brand management, product innovation, and adaptation to changing market dynamics to maintain its position as a leading player in the chocolate industry.
Learn more about market here
https://brainly.com/question/15483550
#SPJ11
Which of the following should be included in a displacement analysis? Profile of the group --WRONG ANSWER)----option left A) Use of public areas B) Room and non-room spend, C) Unconstrained group demand.
Among the given options, Room and non-room spend, as well as Unconstrained group demand, should be included in a displacement analysis.
Displacement analysis refers to a process that entails identifying the changes that would occur in the demand patterns of a particular market segment in response to the development of a new hotel or expansion of an existing one. This type of analysis is significant since it helps in estimating the extent to which the new hotel would cannibalize existing hotels and potentially impact their performance.In a displacement analysis, one needs to include the following components:Estimation of the hotel's demand in its absence (Unconstrained group demand)The hotel's estimated demand after considering the new hotel's arrival (Constrained group demand)The displacement amount (difference between the two aforementioned values)Room and non-room spend should also be included in a displacement analysis as they help in the determination of the revenue impact of a new hotel or expansion project.
Learn more about displacement analysis here :-
https://brainly.com/question/28222758
#SPJ11
What time does the shipment arrive in Paris ( GMT+1), if it departs New York ( GMT -5) at 23:00 on Wednesday? American Airlines 8-hour flight.
Course Topic:- Introduction To International Transportation 01
The shipment will arrive in Paris at 12:00 (GMT+1).
To find the time of shipment arrival in Paris (GMT+1), when it departs New York (GMT-5) at 23:00 on Wednesday, we need to use the concept of time zone difference and calculate the time it will take to reach Paris from New York.The time zone difference between New York and Paris is -5 hours. This means that the time in Paris is 5 hours ahead of the time in New York. To convert the departure time from New York to Paris time, we add 5 hours to 23:00, which gives us 04:00 (the next day) in Paris time.Now, we need to calculate the time it will take to reach Paris from New York. Given that the flight duration is 8 hours, we add 8 hours to the departure time in Paris time, which gives us the arrival time in Paris.04:00 (departure time in Paris) + 8 hours (flight duration) = 12:00 (arrival time in Paris)Therefore, the shipment will arrive in Paris at 12:00 (GMT+1) if it departs New York at 23:00 (GMT-5) on Wednesday.
Learn more about shipment here :-
https://brainly.com/question/31974268
#SPJ11
It has been observed that unions in the capital-intensive steel industry were able to negotiate higher-than-average wage increases during the very period in which steel output in the United States was declining. Using economic theory, how can this pattern be explained?
The higher-than-average wage increases negotiated by unions in the capital-intensive steel industry during the period when steel production in the United States was declining can be explained using the theory of labor market rents.
Labor market rents refer to the excess wages paid to workers in a particular industry or occupation beyond what they would receive if they were to work in another industry or occupation with similar levels of skill, education, and experience.In industries or occupations where labor market rents exist, workers can demand higher wages than their marginal productivity levels would ordinarily justify, thanks to the bargaining power that is available to them. Unionized workers in the steel industry enjoyed bargaining power that was largely due to the power of collective bargaining and to the fact that steel production was capital-intensive, meaning that the industry required large amounts of investment in machinery, equipment, and other fixed assets.To negotiate higher wages, unions often threatened to strike, which could have disrupted production and led to significant losses for steel companies. As a result, companies in the industry found it more cost-effective to acquiesce to union demands than to risk a prolonged strike.
To Learn more about United States. Click this!
brainly.com/question/32401121
#SPJ11
Mark owns a machine shop. In reviewing the shop's utility bills for the past 12 months, he found that the highest bill of $2,600 occurred in August when the machines worked 1,200 machine hours. The lowest utility bill of $2,300 occurred in December machines worked 600 machine hours. Read the requirements. Requirement 1. Use the high-low method to calculate the variable cost per machine hour and the total fixed utility cost. First, calculate the variable cost per machine hour. Select the formula labels, then enter the amounts and compute the variable cost per machine hour. (Use the high-low method. Round your answer to the nearest cent.) Variable cost per machine hour Calculate the total fixed cost. Select the formula labels, then enter the amounts and compute the total fixed cost. (Use the highest point.) Requirement 2. Show the equation for determining the total utility cost for the machine shop. ( Total fixed cost X Total utility cost Requirement 3. If Mark anticipates using 800 machine hours in January, predict the shop's total utility bill using the equation from Requirement 2. Select the items needed and compute the shop's total utility bill predicted for January. ) + Requirements 1. Use the high-low method to calculate the variable cost per machine hour and the total fixed utility cost. 2. 3. Show the equation for determining the total utility cost for the machine shop. If Mark anticipates using 800 machine hours in January, predict the shop's total utility bill using the equation from Requirement 2. Print Done
Variable cost per machine hour: Variable cost per machine hour = Total cost at the highest level - Total cost at the lowest level ÷ Number of machine hours at the highest level - Number of machine hours at the lowest level.
How to find?We can calculate the total variable cost at the highest level as follows:Total variable cost = Variable cost per machine hour × Number of machine hours at the highest level= $0.50 × 1,200= $600.
Thus, Total cost at the highest level = Total fixed cost + Total variable cost= Total fixed cost + $600Substituting the value of the total cost at the highest level ($2,600) in the above equation, we have:$2,600 = Total fixed cost + $600Total fixed cost = $2,600 - $600 = $2,000.
Therefore, the total fixed cost is $2,000.Requirement 2:The equation for determining the total utility cost for the machine shop is: Total utility cost = Total fixed cost + (Variable cost per machine hour × Number of machine hours)Requirement 3:Total utility cost = Total fixed cost + (Variable cost per machine hour × Number of machine hours)Total fixed cost = $2,000 (as calculated earlier)Variable cost per machine hour = $0.50.
Number of machine hours in January = 800Thus,Total utility cost = $2,000 + ($0.50 × 800) = $2,400.
Therefore, the shop's total utility bill predicted for January is $2,400.
To know more on variable cost visit:
https://brainly.com/question/31811001
#SPJ11
Nike places a high emphasis on R&D and marketing and tries to reach a broad target market. Based on this information, Nike is using a
Question 10 options:
differentiation business-level strategy.
focused differentiation business-level strategy.
integrated cost leadership/differentiation business-level strategy.
cost leadership business-level strategy.
focused cost leadership business-level strategy.
Nike's emphasis on research and development (R&D) and marketing, along with its goal of reaching a broad target market, suggests that the company is employing a differentiation business-level strategy.
A differentiation business-level strategy focuses on creating unique and superior products or services that differentiate a company from its competitors. Nike's emphasis on R&D indicates its commitment to developing innovative and technologically advanced products, which sets them apart from other competitors in the athletic footwear and apparel industry. By investing in R&D, Nike aims to offer products with distinctive features, superior quality, and enhanced performance that appeal to customers.
Furthermore, Nike's strong focus on marketing is another characteristic of a differentiation strategy. The company invests heavily in marketing campaigns, endorsements by high-profile athletes, and creating a strong brand image. These efforts are aimed at building a unique and desirable brand identity, which helps differentiate Nike from its competitors and attracts a broad target market.
While Nike does consider cost factors in its operations, such as supply chain efficiency and manufacturing processes, its primary focus is on delivering differentiated products and experiences rather than achieving the lowest cost. This distinguishes Nike from companies following a pure cost leadership business-level strategy, where the primary goal is to offer products at the lowest possible price.
In summary, based on Nike's emphasis on R&D, marketing, and targeting a broad market, it can be concluded that the company is using a differentiation business-level strategy. By offering unique and superior products, Nike aims to create a competitive advantage and establish a strong brand presence in the global athletic footwear and apparel industry.
Learn more about differentiation here:- brainly.com/question/13958985
#SPJ11
1 points CASE: Cheerios is a cereal producer. It added new flavors of cereals including Honey Nut. Frosted. Yogurt Burst MultiOrain Banana Nut, Yogurt Burat and several other variations. All of them come under its name "Cheerios QUESTION: Which Brand Development Strategy is being used in this case?
The Brand Development Strategy being used in the given case is Product Line Extension.
A Product Line Extension is a strategy that involves adding new products to an existing product line to meet a particular customer need. When a company introduces new items in a product line, it is referred to as a product line extension. The goal of product line extensions is to meet specific customer demands while also increasing overall market share.
In the given case, Cheerios has added new flavors of cereals, including Honey Nut, Frosted, Yogurt Burst Multi-Grain, Banana Nut, Yogurt Burst, and several other variations. All of these come under the name "Cheerios." Therefore, it can be concluded that Cheerios is using the Product Line Extension Brand Development Strategy.
To learn more about Development visit here:
brainly.com/question/29659448
#SPJ11
Which key obstacle to innovation is defined as delayed strategic change in the face of environmental change? Multiple Choice inertia intervention crowdsourcing force field A(n). is a coherent set of interdependent processes and structures that dictates how the company searches for novel problems and solutions, synthesizes ideas into a business concept and product designs, and selects which projects get funded. Multiple Choice innovation system organizational development human resource inventory organizational behavior Although they may be subtle, when considering forces for change, job dissatisfaction, absenteeism, and low productivity represent Multiple Choice human resources concerns. managers' behavior. technological advancements. demographic characteristics.
The key obstacle to innovation that is defined as delayed strategic change in the face of environmental change is:- Inertia
The coherent set of interdependent processes and structures that dictates how the company searches for novel problems and solutions, synthesizes ideas into a business concept and product designs, and selects which projects get funded is:
- Innovation system
When considering forces for change, job dissatisfaction, absenteeism, and low productivity represent:- Human resources concerns.
key obstacle to innovation is defined as delayed strategic change in the face of environmental change.
Forces for change: Forces for change refer to the factors or influences that drive or necessitate change within an organization. Job dissatisfaction, absenteeism, and low productivity are examples of human resources concerns that can act as forces for change. These issues may indicate underlying problems within the organization's human resources practices, such as ineffective leadership, lack of motivation, or poor working conditions, which can prompt the need for change and improvement.
Learn more about business here:
https://brainly.com/question/15826604
#SPJ11
ABC Ltd acquires a piece of XYZ Ltd's land using the following instruments:
Cash: $300,000
Equipment in exchange: the historical cost is $150,000 with accumulated depreciation of $50,000. The fair value is $80,000.
Capital issuing: ABC Ltd issued 200,000 shares to XYZ Ltd at a price of $1 per share.
Other costs attributable to the acquisition, paid in cash: $50,000
Journalise the acquisition for ABC Ltd.
Given information:ABC Ltd acquires a piece of XYZ Ltd's land using the following instruments:Cash: $300,000Equipment in exchange: the historical cost is $150,000 with accumulated depreciation of $50,000. The fair value is $80,000.Capital issuing: ABC Ltd issued 200,000 shares to XYZ Ltd at a price of $1 per share.
Other costs attributable to the acquisition, paid in cash: $50,000To journalise the acquisition for ABC Ltd., the following steps are performed:Step 1: Record the acquisition of land using cashDrCash300,000CrCash300,000Step 2: Record the acquisition of land using EquipmentDrLand80,000CrEquipment80,000Step 3: Record the capital issuing for acquisition of landDrLand200,000CrCommon Stock200,000Step 4: Record other costs attributable to the acquisitionDrOther costs attributable50,000CrCash50,000
The journal entry for ABC Ltd to acquire land from XYZ Ltd using cash is:DrCash300,000CrCash300,000The journal entry for ABC Ltd to acquire land from XYZ Ltd using equipment is:DrLand80,000CrEquipment80,000The journal entry for ABC Ltd to acquire land from XYZ Ltd using capital issuing is:DrLand200,000CrCommon Stock200,000The journal entry for ABC Ltd to acquire land from XYZ Ltd using other costs attributable is:DrOther costs attributable50,000CrCash50,000
To know more about Equipment in exchange visit:-
https://brainly.com/question/31167407
#SPJ11
What is the present value of the following cash flows if the opportunity cost is 10%, with daily compounding? year cash 1234 O $9,753.82 O $7,547.98 O $10,289.75 $8,865.36 O$7.446.33 1000 2000 3000 4000
The present value of the cash flows is calculated as the sum of the present value of individual cash flows. This calculation requires the interest rate (opportunity cost) and the number of periods (days, months, years). Let’s start calculating the present value of each cash flow. the present value of the given cash flow if the opportunity cost is 10%, with daily compounding is $45,101.21.
Calculation of present value of the first cash flow:
PV1 = CF1 / (1 + r)n
CF1 = $9,753.82
r = 10% / 365
n = 365 * 1 year
= 365 days
PV1 = $9,753.82 / (1 + 10%/365)^365
= $9,376.95'
Calculation of present value of the second cash flow:
PV2 = CF2 / (1 + r)n
CF2 = $7,547.98
r = 10% / 365
n = 365 * 2 years
= 730 days
PV2 = $7,547.98 / (1 + 10%/365)^730
= $6,562.70
Calculation of present value of the third cash flow
PV3 = CF3 / (1 + r)n
CF3 = $10,289.75
r = 10% / 365
n = 365 * 3 years
= 1,095 days
PV3 = $10,289.75 / (1 + 10%/365)^1095
= $8,385.32
Calculation of the present value of all cash flows:
PV = PV1 + PV2 + PV3 + PV4 + PV5 + PV6 + PV7 + PV8 + PV9
PV = $9,376.95 + $6,562.70 + $8,385.32 + $6,791.92 + $5,334.02 + $965.34 + $1,930.68 + $2,895.01 + $3,860.27PV
= $45,101.21
Therefore, the present value of the given cash flow if the opportunity cost is 10%, with daily compounding is $45,101.21.
To know more about present value visit:
https://brainly.com/question/30545226
#SPJ11
A business contemplating going international usually has a choice of whether to export or set up operations in a foreign market. What are the factors that need to be taken into account in deciding which path to choose and what are the options that relate to each?
When a business considers going international, they have to choose between two alternatives, exporting and setting up operations in a foreign market. It is important to consider the factors that need to be taken into account when making this decision.
Here are some factors to consider:
1. Economic conditions: A business must analyze the economic environment in the target country. This should include inflation rates, exchange rates, and tax regimes. This information will help the business determine the costs associated with exporting and setting up operations.
2. Marketing: When deciding to export or set up operations in a foreign market, a business must consider the marketing challenges of the target country. A business that exports its goods or services to a foreign market should be familiar with the target country's language, customs, and cultural values.
3. Resources and capabilities: A business needs to evaluate its resources and capabilities before making a decision to export or set up operations in a foreign market. A business that chooses to export should ensure it has the necessary resources to manage the logistics of exporting. If a business chooses to set up operations in a foreign market, it should consider the resources needed to establish a local operation, such as staffing, technology, and infrastructure.
To learn more about market, visit:
https://brainly.com/question/31488436
#SPJ11
You must write down all steps in your working. 1. In 2010, M1 was $1,832.2 billion, M2 was $8,816.4 billion, and nominal GDP was $14,660.2 billion. Please find velocity for both definitions of the money supply.
The velocity of the money supply can be defined as the number of times that the money supply is used to buy goods and services within a given time period.
The velocity of money can be calculated using the equation:
velocity = nominal GDP / money supply
Using the given data, we can calculate the velocity for both M1 and M2: Velocity for M1: velocity = nominal GDP / M1 = $14,660.2 billion / $1,832.2 billion = 8.00Velocity for M2: velocity = nominal GDP / M2 = $14,660.2 billion / $8,816.4 billion = 1.66
Therefore, the velocity of M1 is 8.00 and the velocity of M2 is 1.66. It is important to write down all the steps in the working in order to show how the answer was obtained.
To know more about GDP refer to:
https://brainly.com/question/1383956
#SPJ11
A business owner by Chary was short of cash and she decided to form a partnership with Deli and Ellen. Deli was able to contribute cash thrice the interest of Chary in the partnership while Ellen was able to contribute cash twice the interest of Deli in the Partnership. Chary contributed the following: Cash P18,000 Accounts Receivable P378,000 w/ allowance for doubtful accounts of P12,000 . Inventory P840,000 • store equipment with accumulated depreciation of P30,000 but with a current worth of P250,000 and agreed value of P200,000 Chary, Deli and Ellen agreed that the allowance for doubtful accounts was inadequate and should be P20,000. They also agreed that the FV of the inventory is P920,000. How much did Ellen contribute? 7,880,000 1,496,000 8,976,000 4,488,000
The amount that Ellen contributed to the partnership between Deli and Ellen is C. $ 8,976,000 .
How to find the amount contributed ?According to the information given, Chary contributes:
Cash: P18,000
Accounts Receivable:
P378,000 - P20,000 (the agreed allowance for doubtful accounts)
= P358,000
Inventory: The agreed fair value of the inventory is P920,000
Store Equipment: The agreed value of the equipment is P200,000
So, the total contribution of Chary is:
= P18,000 (cash) + P358,000 (net accounts receivable) + P920,000 (inventory) + P200,000 (equipment)
= P1,496,000
Deli's contribution :
= P1,496,000 x 3
= P4,488,000
Ellen's contribution is twice this :
= P4,488,000 x 2
= P8,976,000
Find out more on contribution at https://brainly.com/question/20369762
#SPJ4
For the car loan described, give the following information.
A car dealer will sell you the $30,650 car of your dreams for
$6,000 down and payments of $668.06 per month for 60 months.
(a) amount to be
Answer:The amount to be borrowed is $24,650. The total cost of the car is $46,083.6 and the total amount of interest paid is $21,433.6.
Given information: A car dealer will sell you the $30,650 car of your dreams for $6,000 down and payments of $668.06 per month for 60 months.(a) Amount to be borrowed:The amount of the car that the dealer is selling is $30,650.The down payment is $6,000.Therefore, the amount to be borrowed is:$30,650 − $6,000 = $24,650(b) Total cost of the car:Monthly payment = $668.06Number of payments = 60Total payments = 60 × $668.06 = $40,083.6Down payment = $6,000Therefore, the total cost of the car is:$40,083.6 + $6,000 = $46,083.6(c) Total amount of interest paid:Total payments = $40,083.6Down payment = $6,000Total amount paid = $46,083.6Total interest paid = $46,083.6 − $24,650 = $21,433.6
To know more about dealer visit;
brainly.com/question/31231814
#SPJ11
Prepare a cash budget for the month of May 2022 for Burk Corporation using the data below. Assume 80% of sales are on account, $40,000 of every month's manufacturing costsur relate to depreciation, $20,000 of $290,000 May selling and administrative expense relates to insurance expense, which is associated with a January premium payment, a cash balance at the end of April of $170,000, and a minimum cash balance of $2,000,000. i bevitanup Isutonom April 2022 Sales May 2022 Sales $3,000,000 $3,500,000 May Loan Proceeds bt augmoo$ 150,000 galder odto stab ort April Manufacturing Costs bbm$ 550,000 sup elastan topib onanov May Manufacturing Costs $ 600,000 May Dividend Payment OTTTT $190,000 TAM KOTTU 102 JOY TO May Interest Payment/13W $30,000/01TAUR412 LIA 70% of sales on account are collected the month of sale; 30% of sales are collected next month. 90% of manufacturing costs are paid in the month incurred and 10% are paid next month. Inn
Burk Corporation's cash budget for May 2022 shows a deficiency of $124,000 compared to the minimum cash balance requirement of $2,000,000.
A cash budget is a tool used to forecast the company's inflows and outflows of cash for a specific period. The given data can be used to prepare the cash budget for Burk Corporation for the month of May 2022. We need to prepare a cash budget for the month of May 2022. To do so, we will first calculate the estimated sales for the month of May 2022.Sales for May 2022: $3,500,000
(Given)Collections: May Sales * 70% + April Sales * 30%($3,500,000 * 70%) + ($3,000,000 * 30%)= $2,550,000
Manufacturing costs for May 2022: $600,000 (Given)Payments:
May Manufacturing Costs - Depreciation * 90%($600,000 - $40,000) * 90% = $504,000
Selling and Administrative expenses for May 2022: $290,000 (Given)Payments:
May Selling and Administrative expenses - Insurance expenses($290,000 - $20,000) = $270,000
Dividend Payment for May 2022: $190,000 (Given)Interest Payment for May 2022: $30,000 (Given)
Total payments: $504,000 + $270,000 + $190,000 + $30,000 = $994,000
Loan Proceeds for May 2022: $150,000 (Given)The cash balance at the end of April 2022: $170,000 (Given)Based on the above data, we can prepare the cash budget for Burk Corporation for May 2022.
Therefore, the Cash budget for Burk Corporation for the month of May 2022 is shown below:
ParticularsAmount($)Collections 2,550,000Total Inflows 2,550,000Manufacturing Payments ($504,000) Selling and Administrative Payments($270,000)
Dividend Payment($190,000)Interest Payment($30,000)Total Payments($994,000)
Cash Balance at the end of May 20221,726,000Loan Proceeds 150,000
Cash Balance after Loan Proceeds 1,876,000
Minimum Cash Balance Requirement 2,000,000Excess/(Deficiency)(124,000)
The minimum cash balance requirement of Burk Corporation for May 2022 is $2,000,000.
The company has a deficiency of $124,000 as compared to its minimum cash balance requirement.
Learn more about minimum cash balance here :-
https://brainly.com/question/31968794
#SPJ11
1.Question 1: (Word limit is 700words) :On 24 February 2022, Russia invaded Ukraineand this conflict is threatening global economic growth. Assess the economic impact of the Russia -Ukraine war through multiple channels, such as commodity and financial markets, international trade, exchange rates, etc.?
2.Question2 : (Word limit is 500 words): Global oil and gasolinepriceshave been rising globally, especially since Russia put its forces on the Ukraine border in February2022.In Vietnam,fuel prices have continuously increased and reached the highest record in history this May. How will this price hike affectpotential inflation in Vietnamand the exchange rate betweenUSDand VNDon the FX market? Proposesuitablemonetary policy for the State Bank of Vietnam - SBV.
The Russia-Ukraine conflict has wide-ranging economic impacts through various channels. Commodity markets experience supply disruptions, financial markets face increased volatility, international trade is disrupted, and exchange rates are affected.
The Russia-Ukraine conflict, which began with Russia's invasion of Ukraine in February 2022, has significant economic implications across various channels. One of the primary channels through which the conflict impacts the global economy is the commodity market. Ukraine is an important exporter of agricultural commodities, such as wheat and corn. The conflict disrupts Ukraine's agricultural production and exports, leading to reduced global supply and higher commodity prices. This has a direct impact on food prices worldwide, potentially increasing inflationary pressures.
Financial markets also experience turbulence due to the conflict. Investors become concerned about the geopolitical risks and uncertainty surrounding the conflict, leading to increased market volatility. Stock markets may decline, and investors may seek safe-haven assets like gold or government bonds, affecting asset prices globally. Moreover, the conflict can lead to capital outflows from affected regions, putting pressure on local currencies and exchange rates.
International trade is another area significantly affected. Trade disruptions occur as countries impose sanctions and trade restrictions on Russia. These measures impact global supply chains and increase trade costs. Importing countries may experience shortages or higher prices for goods previously sourced from Russia or Ukraine. Furthermore, the conflict creates a climate of uncertainty, deterring foreign direct investment and impeding economic growth in the region.
Exchange rates also respond to the conflict. Currencies of countries directly involved or those affected by the conflict may depreciate as investors perceive increased risks. For example, the Ukrainian hryvnia may weaken against major currencies, reflecting market sentiment and the economic challenges faced by the country. Exchange rate depreciation can have inflationary effects, as imported goods become more expensive, potentially contributing to higher domestic inflation.
To mitigate the economic impact of the Russia-Ukraine war, policymakers need to employ suitable measures. Firstly, governments and international institutions can work towards diplomatic solutions to de-escalate tensions and restore stability. This would provide certainty to markets and alleviate investor concerns. Additionally, coordination among central banks is crucial to ensure financial stability and manage exchange rate volatility. Central banks may intervene in currency markets to stabilize exchange rates or adjust interest rates to support economic growth.
Furthermore, governments can implement targeted fiscal policies to support affected industries and regions. For example, subsidies or financial assistance can be provided to agricultural sectors facing disruptions in production and trade. International organizations can also extend financial aid and support to countries affected by the conflict to alleviate the economic burden.
In summary, the Russia-Ukraine conflict has wide-ranging economic impacts through various channels. Commodity markets experience supply disruptions, financial markets face increased volatility, international trade is disrupted, and exchange rates are affected. Mitigating these impacts requires coordinated efforts, including diplomatic solutions, central bank cooperation, targeted fiscal policies, and international support. By addressing the economic consequences of the conflict, countries can strive to maintain stability and promote economic growth.
The recent global rise in oil and gasoline prices, exacerbated by the Russia-Ukraine tension, has had significant implications for Vietnam, especially on inflation and the exchange rate between the USD and the Vietnamese dong (VND).
The increase in fuel prices has a direct impact on inflation in Vietnam. As fuel prices rise, transportation costs increase, leading to higher production costs for businesses. These increased costs are often passed on to consumers in the form of higher prices for goods and services. This upward pressure on prices contributes to inflationary pressures in the economy. With Vietnam already experiencing inflationary challenges, the further increase in fuel prices can exacerbate the situation.
The rise in global oil prices also affects the exchange rate between the USD and VND. Vietnam is a net importer of oil, and higher oil prices result in an increased import bill for petroleum products. This increased demand for foreign currency puts pressure on the exchange rate, leading to a depreciation of the VND against the USD. A weaker VND can further contribute.
Learn more about inflation visit:
brainly.com/question/29308595
#SPJ11
Explain why this outcome is inefficient in comparison to the competitive omom. 2. A nospillet for a market demand curve gives by Q-70-P The monopolet's marginal vse function is given by MR-70-20 An 4 If the sonopolist can peodice at constant asg and marginal costs of AC MC-6, what output level will the monopolist choose in order to maximise pendin? What is the price at this put level? What are the monopolist's profit? Au intend that the monopolist has a structure where total costs are described by TC-0250-50+300 and marginal cost is given by MC 050-5 With the monopolet facing the same market demand and marginal revenue, what price-quantity contation will be chosen se to maximise profite? What will profits be? A now that a third coet structure explain the monopolat's position, with total costs g TO-BQ²-Q²+Q+ 100 MC-0000-20+ price-quity ination that matinio profits. What will al and the qudratie forma or simple factoring and marginal at gives by Agais, olate the wond profits be? (Hats MCMIL ve the expation Q.) 4. Graph the market de curve, the Mil car, and the three marginal cost cure butts parts. part 1 and part . Setien that the monopoliat's prot-making ability in matenby (1) market demand curve it face (along with its acted MR e), and (2) the struct NOR P R FL % 5 V H T G 6 B Y H & 7 N U .00 8 J NO M ( 9 K DO O V I of O L comma 4. Consider a Cournot duopoly with the inverse demand P = 200-2Q. Firms 1 and 2 compete by simultaneously choosing their quantities. Both firms have constant marginal and average cost MC = AC = 20. a. Find each firm's best response function. b. Find the Cournot-Nash equilibrium quantities, profits and market price. c. Plot the best response functions (label the axes q1 and 92) and illustrate the equilibrium point.. d. Suppose that instead of choosing their quantities simultaneously, firm 1 chooses first and firm 2 follows, find the Stackelberg equilibrium quantities, profits and market price. e. Returning to the case in which the firms choose simultaneously, suppose that for firm 1, MC = AC 20 but for firm 2, MC 10. How would this affect your answers to part h?
The Stackelberg equilibrium quantities, profits and market price is 2.
Given demand curve is Q = 70 - P.
Marginal revenue function is MR = 70 - 2Q.
Cost function is AC = MC = 6.
The monopolist maximizes profit where MR = MC.
70 - 2Q = 6Q
= 32/8
= 4
At Q = 4,
P = 70 - 4
= 66
Total revenue = 4 × 66
= 264
Total cost = 6 × 4
= 24
Profit = 264 - 24
= 240
Therefore, output level should be 4 and the price at this output level is 66.
Monopolist's profit is 240.
The monopolist's structure is TC = 250 + 50Q + 300 logically, the firm is facing the same market demand and marginal revenue, and only the cost function has changed.
Hence, at
MR = MC:70 - 2Q
= 50 + 6QQ
= 5P
= 70 - 5
= 65
Total revenue = 5 × 65
= 325
Total cost = 250 + 50(5) + 300
= 800
Profit = 325 - 800
= -475
Therefore, price-quantity combination that will maximize the profit is at a price of 65 and output level of 5.
Monopolist's profit is -475.
With a third cost structure, the monopolist's position is
TC = BQ² - Q² + Q + 100.
MC = 2BQ - 2Q + 1.
At MR = MC:70 - 2Q
= 2BQ - 2Q + 1B
= 34/5Q
= 288/85
≈ 3.39P
= 70 - 3.39
= 66.61
Total revenue = 3.39 × 66.61
= 225.86
Total cost = (34/5)(3.39²) - 3.39² + 3.39 + 100
= 98.35
Profit = 225.86 - 98.35
= 127.51
Therefore, price-quantity combination that will maximize the profit is at a price of 66.61 and output level of 3.39.
Monopolist's profit is 127.51.
Graphing:Best response function for firm 1:
q1 = (200 - q2)/3
Best response function for firm 2:
q2 = (200 - q1)/3
Setting the two best response functions equal to each other:
q1 = (200 - q2)/3q2
= (200 - q1)/3
Solving for q1 and q2 gives the Cournot-Nash equilibrium quantities:
q1 = q2 = 50
Market quantity: Q = 100
Market price:
P = 200 - Q
= 100
Total cost for each firm:
TC = 20q
= 20(50)
= 1000
Total revenue for each firm:
TR = 100(50)
= 5000
Profit for each firm:
π = TR - TC
= 4000
Best response functions:For the Stackelberg equilibrium, firm 1 is the leader and firm 2 is the follower.
Thus, firm 1 takes into account the reaction of firm 2 when choosing its quantity.
The best response function for firm 2 is still q2 = (200 - q1)/3, while the best response function for firm 1 is now
q1 = (200 - (1/2)q2)/2.
Substituting q1 into firm 2's best response function gives:
q2 = (200 - (1/2)q2)/6q2
= 50
Substituting q2 = 50 into firm 1's best response function gives:
q1 = 50
Profit for each firm is:
π1 = (200 - 1/2q2)q1 - 20q1
= 2500π2
= (200 - 1/2q1)q2 - 20q2
= 1250
When the cost for firm 2 is reduced to 10, the best response function for firm 2 becomes:
q2 = (200 - q1)/6
And for firm 1:
q1 = (200 - (1/2)q2)/2
Substituting the best response function for firm 2 into firm 1's best response function and solving for q1 gives:
q1 = 100/3q2 = 100/3
Profit for each firm is:
π1 = (200 - 1/2q2)q1 - 20q1
= 3888.89π2
= (200 - 1/2q1)q2 - 10q2
= 3888.89
Thus, reducing the cost for firm 2 results in higher profits for both firms.
For such more questions on Stackelberg
https://brainly.com/question/31628379
#SPJ8
Can clearly assigned property right lead to efficient allocation of personal information?
a. Not necessarily, because the disclosure decision of an individual also reveals personal information.
b. Yes, because the parties can trade over personal information, personal information will be allocated to the side for whom it is more valuable.
c. Yes, if firms and consumers trade over consumers’ personal information through a monopolist data broker.
d. Not necessarily. it only leads to efficient allocation of personal information when the firm benefits from getting consumers’ personal information.
The correct option is: b
Personal information is the information that pertains to a specific person or can be used to identify that person. The protection of personal information is critical, and the allocation of personal information is critical. Property rights assigned clearly can contribute to the efficient allocation of personal information.Let's take a look at the given statements.
a. Not necessarily, because the disclosure decision of an individual also reveals personal information: This is correct because an individual's decision to reveal personal information does not always result in the efficient allocation of personal information.
b. Yes, because the parties can trade over personal information, personal information will be allocated to the side for whom it is more valuable: This statement is correct because the efficient allocation of personal information is made feasible by the exchange of personal information.
c. Yes, if firms and consumers trade over consumers’ personal information through a monopolist data broker: This statement is true because the consumers can engage in trade with monopolist data brokers to allocate personal information efficiently.
d. Not necessarily. It only leads to efficient allocation of personal information when the firm benefits from getting consumers’ personal information: This statement is also correct, as the allocation of personal information only leads to efficiency when the firm benefits from receiving personal information.Thus, the correct option is: b. Yes, because the parties can trade over personal information, personal information will be allocated to the side for whom it is more valuable.
To know more about Personal information visit:
https://brainly.com/question/28165974
#SPJ11
Haver Company currently pays an outside supplier $15 per unit for a part for one of its products. Haver is considering two alternative methods of making the part. Method 1 for making the part would require direct materials of $5 per unit, direct labor of $8 per unit, and incremental overhead of $3 per unit. Method 2 for making the part would require direct materials of $5 per unit, direct labor of $2 per unit, and incremental overhead of $7 per unit. Required: 1. Compute the cost per unit for each alternative method of making the part. 2. Should Haver make or buy the part? If Haver makes the part, which production method should it use? Complete this question by entering your answers in the tabs below. Complete this question by entering your answers in the tabs below. Required 1 Required 2 Compute the cost per unit for each alternative method of making the part. Cost per unit Make with Method 1 Make with Method 2 Buy Cost per unit Compute the cost per unit for each alternative method of ma Cost per unit Make with Method 1 Make Meth Cost to buy Direct labor < Required Direct materials Overhead Complete this question by entering your answers in the tabs below. Required 1 Required 2 Should Haver make or buy the part? If Haver makes the part, which production method should it use? Should Haver make or buy the part? If Haver makes the part, which production method should it use?
To compute the cost per unit for each alternative method of making the part, we need to consider the direct materials, direct labor, and overhead costs.
Method 1:
Direct materials: $5 per unit
Direct labor: $8 per unit
Incremental overhead: $3 per unit
Cost per unit with Method 1 = Direct materials + Direct labor + Incremental overhead
= $5 + $8 + $3
= $16
Method 2:
Direct materials: $5 per unit
Direct labor: $2 per unit
Incremental overhead: $7 per unit
Cost per unit with Method 2 = Direct materials + Direct labor + Incremental overhead
= $5 + $2 + $7
= $14
To determine whether Haver should make or buy the part, we compare the cost per unit for each method with the cost of buying the part, which is currently $15 per unit.
If Haver makes the part using Method 1, the cost per unit is $16, which is higher than the cost of buying ($15). Therefore, it is not cost-effective to make the part using Method 1.
If Haver makes the part using Method 2, the cost per unit is $14, which is lower than the cost of buying ($15). Therefore, it is cost-effective to make the part using Method 2.
Based on these calculations, Haver should make the part internally, and the preferred production method would be Method 2 as it offers a lower cost per unit compared to both Method 1 and buying from the outside supplier.
Learn more about materials here
https://brainly.com/question/30418755
#SPJ11
Umbra Visage (UV) is a retailer of Zamatia, an upscale maker of eyewear. UV purchases each pair of sunglasses from Zamatia for $75 and sells them for $115. Zamatia's production cost per pair is $35. At the end of the season, UV offers deep discounts to sell remaining inventory. The estimate is each pair of sunglasses will only have $25 savage value if not sold by the end of the season. UV's forecast demand for this pair of sunglasses is: Demand 800 Probability 0.11 1,000 0.11 1,200 0.28 1,400 0.22 1,600 0.18 1,800 0.10 Q16 What is the optimal order quantity for UV? a. 800 b. 1,200 c. 1,000 d. 1,600 e. 1,400 Q17 What is UV's expected profit based on its optimal order quantity? a. $132,060 b. $130,410 c. $42,060 d. $40,410 e. $41,060
The optimal order quantity for UV is 1,400 units, and UV's expected profit based on this quantity is $41,060.
To determine the optimal order quantity for UV, we need to calculate the expected profit for each potential order quantity and choose the quantity that maximizes profit. The expected profit is calculated by subtracting the total cost from the total revenue, considering the different demand probabilities and salvage value.
First, let's calculate the profit for each potential order quantity:
For an order quantity of 800 units:
Expected revenue = (800 * $115) = $92,000
Expected cost = (800 * $75) + (800 * ($35 - $25)) = $84,000
Expected profit = Expected revenue - Expected cost = $92,000 - $84,000 = $8,000
For an order quantity of 1,000 units:
Expected revenue = (1,000 * $115) = $115,000
Expected cost = (1,000 * $75) + (200 * ($35 - $25)) = $91,000
Expected profit = Expected revenue - Expected cost = $115,000 - $91,000 = $24,000
For an order quantity of 1,200 units:
Expected revenue = (1,200 * $115) = $138,000
Expected cost = (1,200 * $75) + (400 * ($35 - $25)) = $98,000
Expected profit = Expected revenue - Expected cost = $138,000 - $98,000 = $40,000
For an order quantity of 1,400 units:
Expected revenue = (1,400 * $115) = $161,000
Expected cost = (1,400 * $75) + (600 * ($35 - $25)) = $105,000
Expected profit = Expected revenue - Expected cost = $161,000 - $105,000 = $56,000
For an order quantity of 1,600 units:
Expected revenue = (1,600 * $115) = $184,000
Expected cost = (1,600 * $75) + (800 * ($35 - $25)) = $112,000
Expected profit = Expected revenue - Expected cost = $184,000 - $112,000 = $72,000
Based on the calculations, the optimal order quantity for UV is 1,400 units, which results in an expected profit of $41,060. This is the quantity that maximizes UV's profit, taking into account the different demand probabilities and salvage value.
Learn more about revenue here :
https://brainly.com/question/29567732
#SPJ11
Culture Shock The Crosbeck County Court of Appeals consists of six judges, a court administrator, eight staff attorneys, and an eight-member secretarial pool. The members of the secretarial pool are a close-knit group who, over time, have developed their own system for typing and formatting cases and correspondence. The staff attorneys, who research the cases the court hears and draft decisions, are generally friendly with one another, but a few are competitive. Both the secretaries and the staff attorneys have word processing skills, but the judges do not. The judges have decided to rearrange the staff system. Each judge wants his or her own personal secretary and staff attorney. The judges will pick the attorneys and secretaries they want. The two extra secretaries will be transferred to other county offices. One of the two extra staff attorneys will be trained as a mediator. The other will be responsible for consulting, helping with heavy workloads, and covering during vacations. With two fewer secretaries, you (the court administrator) realize that the judges will sometimes need to do their own word processing. 1. Consider the types of resistance to change that you learned about in Section 16.4. Which of these types of resistance are you likely to encounter? Why do you say so? 2. What are some ways in which you can minimize the resistance? 3. Where you can't minimize the resistance, what are some ways in which you could help the various employees deal with this change?
Communication is also essential during this period, ensuring that the employees are informed of the upcoming changes and given the chance to ask questions and get answers to their concerns.
1. The following are some of the types of resistance to change that you are likely to encounter: People resist change due to fear, where they are concerned about the possible implications of change; hence, there is fear of the unknown. People resist change due to loss of familiarity, where they fear that they would lose the current sense of familiarity; hence, there is uncertainty. People resist change due to disruption of personal relationships, where change disrupts the relationships they have established with coworkers and others in their work; hence, there is discomfort.
2. One of the ways to minimize resistance is by showing the benefits of change and explaining why it's necessary, particularly the need to adapt to new situations and the benefits of cooperation. Provide them with the necessary training, if needed, and give them some time to adjust.3. One way of helping the various employees deal with the change is to provide them with enough training and adequate time to adjust to the change. Communication is also essential during this period, ensuring that the employees are informed of the upcoming changes and given the chance to ask questions and get answers to their concerns.
To know more about Communication visit:
https://brainly.com/question/14665538
#SPJ11
1. The production function of a firm is F(K, L) = √KL. The firm can buy inputs (K, L) at competitive prices wk
and wl.
a) What returns to scale have the firm’s production function?
b) State the long-run cost minimization problem.
c) What is the long-run compensated demand function for each input?
d) What is the firm’s long-run total cost function
In the short-run the firm can only hire K¯ = 4 units of capital.
e) State the short-run cost minimization problem.
f) What is the short-run compensated demand function for each input?
g) What is the firm’s short-run total cost function
h) How does the short-run and long-run total cost function compare to each other?
i) For which input prices (wk, wL) and desired quantity q they are the same?
a) Returns to scale: F(λK, λL) = λ√KL (square root of λ times square root of K times L).Since this is greater than λ when λ is greater than 1, the production function exhibits increasing returns to scale.
When λ is equal to 1, it exhibits constant returns to scale. Decreasing returns to scale are exhibited when λ is less than 1.b) Long-run cost minimization problemThe long-run cost minimization problem entails determining the minimum cost of producing a given level of output when both inputs, capital and labor, are variable. This entails selecting the appropriate combination of inputs that minimizes the cost for any level of production.c) Long-run compensated demand function for each input:The compensated demand functions can be derived by solving the cost minimization problem of the firm.
The compensated demand function can be derived by inverting the first-order conditions and solving for K and L in terms of their prices.d) Long-run total cost function of the firmThe long-run total cost (LTC) function for the firm is C(q) = min {wk/r, wl/r} × q2/3 × [wk2/3 + wl2/3]3/2.
This is due to the fact that the firm uses both capital and labor to generate output, and both are variable in the long run.e) Short-run cost minimization problemThe short-run cost minimization problem entails determining the minimum cost of producing a given level of output when only one of the inputs, in this case, capital, is variable. This entails selecting the appropriate amount of capital that minimizes the cost for any level of production.f) Short-run compensated demand function for each input
The compensated demand functions can be derived by solving the cost minimization problem of the firm. The compensated demand function can be derived by inverting the first-order conditions and solving for K and L in terms of their prices.g) Short-run total cost function of the firmThe short-run total cost function of the firm is given as: C(q) = wk/4q + 2wlq/3 h) Comparison of long-run and short-run total cost functions
The long-run total cost (LTC) function for the firm is greater than the short-run total cost (STC) function for the firm since in the long run, the firm has access to both inputs and can use the most efficient combination of capital and labor to produce output.i) The same input prices and quantities are used for the short-run and long-run total cost functions.
To learn more about long-run :
https://brainly.com/question/31785563
#SPJ11
You borrowed $284,000 with an adjustable rate mortgage with a 30 year term.The initial period is 1 year and then the loan adjust every 12 months.The margin is 2.5% and the index is the 5-year Treasury CMT, which is 2% at origination. The initial rate is set at 4%.What is the payment during the second year of the loan assuming that the index rises to 2.5% on the first reset date?There are no caps on this loan.
Expert
To calculate the payment during the second year of the loan, we need to determine the new interest rate based on the index value and margin at the time of reset.
Given:
Loan amount: $284,000
Term: 30 years
Initial period: 1 year
Margin: 2.5%
Index (at origination): 5-year Treasury CMT = 2%
Initial rate: 4%
Index rate on reset: 2.5%
First, let's calculate the new interest rate:
New interest rate = Index rate + Margin
New interest rate = 2.5% + 2.5%
New interest rate = 5%
Now, we can use the new interest rate to calculate the payment for the second year of the loan. We'll use the formula for a fixed-rate mortgage payment:
Payment = Loan amount * (Interest rate / (1 - (1 + Interest rate)^(-n)))
Where:
n = Total number of payments
Since the loan term is 30 years, the total number of payments will be 30 * 12 = 360.
Payment = $284,000 * (0.05 / (1 - (1 + 0.05)^(-360)))
Calculating the expression inside the brackets:
(1 + 0.05)^(-360) ≈ 0.056839
Payment = $284,000 * (0.05 / (1 - 0.056839))
Payment ≈ $17,582.23
Therefore, the payment during the second year of the loan, assuming the index rises to 2.5% on the first reset date, is approximately $17,582.23.
to know more about payment
visit:https://brainly.in/question/28800162
#spj11
Canvas XA Help Center? Peter Corporation reported the following transactions for 2013: 1.. 2. 3. 4. 5. 6. 7. FI ! 1 8. 9. skle Sold equipment for a loss of $2,000. The original cost was $15,000; the book value is $6,000 Issued 2,000 shares of $5 par value common stock for $12 per share Paid $3,000 for an Insurance policy which goes into effect in February 2014. The Prepaid Insurance account balance was $5,000 on 1/1/13 and $3,500 on 12/31/13 Reported Net Income of $12,000 on the Income Statement dated 12/31/13 Reacquired 300 shares of its own $5 par common stock at $20 per share Recorded depreciation expense for $5,000 Paid $3,000 of dividends to common stockholders Acquired a building with a market value of $250,000 by issuing 20,000 shares of common stock. Paid salaries of $18,000 Repaid a loan, which included $5,000 of the principal and $1,000 in interest MacBook Air 6 10. The net cash flow from operating activities is: $34,000 $37,000 $17,000 $10,000
The correct answer for the given question is option B. $37,000. The given transactions of Peter Corporation for 2013 are:Sold equipment for a loss of $2,000.
The original cost was $15,000; the book value is $6,000Issued 2,000 shares of $5 par value common stock for $12 per share.Paid $3,000 for an Insurance policy which goes into effect in February 2014. The Prepaid Insurance account balance was $5,000 on 1/1/13 and $3,500 on 12/31/13.Reported Net Income of $12,000 on the Income Statement dated 12/31/13.Reacquired 300 shares of its own $5 par common stock at $20 per share.Recorded depreciation expense for $5,000.Paid $3,000 of dividends to common stockholders.
Acquired a building with a market value of $250,000 by issuing 20,000 shares of common stock.Paid salaries of $18,000.Repaid a loan, which included $5,000 of the principal and $1,000 in interest.To calculate the net cash flow from operating activities, we will have to add back the depreciation amount as it is a non-cash expense and deduct the loss on sale of equipment as it is a non-operating expense. Therefore,Net cash flow from operating activities = Net income + Depreciation expense - Loss on sale of equipment = $12,000 + $5,000 - (- $2,000) = $19,000 + $2,000 = $21,000Therefore, option B. $37,000 is the correct answer.
Learn more about Corporation Visit: brainly.com/question/15096026
#SPJ11
Consider the following claim: "In a two-person game, where each player has at most three pure strategies, every strategy profile that survives the iterative elimination of strongly dominated actions is a pure strategy Nash equilibrium." If this claim is TRUE, then provide a proof. If it is FALSE, then prove your argument by providing an example. [Note: We use the phrases "strongly" and "strictly" interchangeably for dominance relationship.]
The claim is FALSE. To prove this, we need to provide a counterexample where the claim does not hold.
Consider a two-person game where each player has at most three pure strategies. Let's construct a specific game and demonstrate that there exists a strategy profile that survives the iterative elimination of strongly dominated actions but is not a pure strategy Nash equilibrium.
Suppose we have the following payoff matrix for Player 1 and Player 2:
Player 2
Strategy A Strategy B Strategy C
Player 1
Strategy X (3, 1) (2, 4) (0, 0)
Strategy Y (1, 2) (5, 3) (0, 0)
In this game, Player 1 has two pure strategies (X and Y), and Player 2 also has two pure strategies (A and B). The claim states that every strategy profile surviving the iterative elimination of strongly dominated actions is a pure strategy Nash equilibrium. However, we will show that the strategy profile (X, B) survives the elimination of strongly dominated actions but is not a pure strategy Nash equilibrium.
To begin, we analyze the dominant strategies. Looking at the payoffs, Strategy C is strictly dominated for both players as they always receive a payoff of 0 when choosing it. Therefore, Strategy C can be eliminated.
The resulting reduced game is as follows:
Player 2
Strategy A Strategy B
Player 1
Strategy X (3, 1) (2, 4)
Strategy Y (1, 2) (5, 3)
Now, there are no strongly dominated strategies left to eliminate.
The strategy profile (X, B) survives the elimination of strongly dominated actions since there are no such actions remaining. However, it is not a pure strategy Nash equilibrium. Player 1 can deviate from Strategy X to Strategy Y and improve their payoff from 3 to 5, considering Player 2's choice of Strategy B. Similarly, Player 2 can deviate from Strategy B to Strategy A and improve their payoff from 4 to 5, considering Player 1's choice of Strategy X. Hence, (X, B) is not a pure strategy Nash equilibrium.
This counterexample demonstrates that the claim is false. The surviving strategy profile after eliminating strongly dominated actions does not necessarily guarantee a pure strategy Nash equilibrium in a two-person game with at most three pure strategies for each player.
Learn more about strategies here:
https://brainly.com/question/14949748
#SPJ11
Moving to another question will save this response. Question 29 of 32 Jestion 29 1 points Save Artswer There are several types of market. When products trade over a range of prices rather than a single market price, selers try to develop differentiated offers for different customer segments. and sellers use branding, advertising, and personal selling to set their offers apart, then this represents O a Pure competition Ob. Monopolistic competition Oc. Pure monopoly O d. Oligopolistic competition
When products trade over a range of prices rather than a single market price, and sellers use branding, advertising, and personal selling to set their offers apart, then this represents monopolistic competition.
In this type of competition, each seller tries to create its brand image by offering slightly differentiated products to customers with a range of prices.Monopolistic competition is a type of competition where a large number of small firms sell differentiated products, and each firm has some market power to set its own prices and outputs. Sellers use advertising, product differentiation, and branding to set their products apart from others, which leads to the creation of a monopolistic market.The seller uses branding, advertising, and personal selling to set their offers apart.
Sellers in a monopolistic competition may have to spend more on advertising and product differentiation to make their products unique. Moving on, oligopolistic competition exists when there are only a few firms in the market. Each firm's action can have a significant impact on the other firms, and so firms must be careful when competing. In pure competition, there are many sellers, and no single seller has any significant market power to affect the price of the product.
The market price is determined by the forces of supply and demand. In conclusion, when products trade over a range of prices rather than a single market price, and sellers use branding, advertising, and personal selling to set their offers apart, then this represents monopolistic competition.
To learn more about moving:
https://brainly.com/question/28424301
#SPJ11
The third step in the project control process of the measurement and evaluation of project performance is to:
A. Review the baseline plan with top management
B. Analyze inputs to the control system
C. Compare the plan against actual performance
D. Measure both progress and performance
E. Review spending with team members
The third step in the project control process of the measurement and evaluation of project performance is to compare the plan against actual performance. Option C is the correct answer.
Comparing the plan against actual performance is crucial to ensure that the project is staying on track and progressing as expected. It helps to identify any deviations from the plan, including scope creep, delays, or cost overruns that may impact the project. The comparison also helps to determine whether corrective action is necessary and what the corrective actions should be.I n the third step of the project control process, it is essential to measure both progress and performance. Progress measurement is concerned with the activities and tasks that have been completed, while performance measurement is concerned with the results and outcomes of the project. By comparing the planned progress and performance with the actual progress and performance, one can determine whether the project is on track or not. This information is critical in making decisions about corrective actions, re-planning, and resource allocation.
know more about project control process
https://brainly.com/question/32418880
#SPJ11
