at its peak, a tornado is 49.0 m in diameter and carries 495-km/h winds. what is its angular velocity in revolutions per second?

Answers

Answer 1

The angular velocity of the tornado is approximately 0.8923 revolutions per second.

To calculate the angular velocity of the tornado, we need to first find its linear velocity and then convert it to angular velocity.The linear velocity can be calculated using the formula:
linear velocity = circumference / time

The circumference of the tornado can be found using the formula: circumference = π * diameter
Substituting the given diameter of 49.0 m, we get:
circumference = π * 49.0 m.

Next, we need to convert the speed of the tornado from km/h to m/s. We can do this by multiplying the given speed by (1000 m / 1 km) and then dividing by 3600 s to convert from hours to seconds:
linear velocity = (495 km/h) * (1000 m / 1 km) / (3600 s)
Now we have both the circumference and the linear velocity. To find the angular velocity, we use the formula:
angular velocity = linear velocity / radius
Since the diameter is given, we need to divide it by 2 to find the radius:radius = diameter / 2
Substituting the values, we have:
angular velocity = (linear velocity) / (diameter / 2)
Calculating the angular velocity:
angular velocity = [(495 km/h) * (1000 m / 1 km) / (3600 s)] / (49.0 m / 2)
Simplifying the expression, we find:
angular velocity = [(495 * 1000) / (3600)] / (49.0 / 2)
angular velocity = (137.5 m/s) / (49.0 / 2)

angular velocity = (137.5 m/s) / 24.5
angular velocity = 5.6122 radians/s.

To convert the angular velocity to revolutions per second, we need to divide the angular velocity by 2π (the number of radians in one revolution):
angular velocity in revolutions per second = (5.6122 radians/s) / (2π)
angular velocity in revolutions per second ≈ 0.8923 revolutions/s.

Therefore, the angular velocity of the tornado is approximately 0.8923 revolutions per second.

To learn more about angular velocity:

https://brainly.com/question/30237820

#SPJ11


Related Questions

the accepted value for h is 14.0kj/mol. deermine the absolue value of the percent error in your average

Answers

Given dataAccepted value for h is 14.0 kJ/mol. To find the absolute value of percent error in your average:SolutionFirst, we need to calculate the average.

We have no data available to calculate the average. Therefore, we need some data to calculate the average. Let's consider some random data. Suppose we have four random values of h. The values of h are 14.5, 15.3, 13.9, and 13.2 kJ/mol. To calculate the average, add all the values of h and divide by the total number of values. The average value of h is:Average

h = (14.5+15.3+13.9+13.2)/4

=56.9/4

=14.225 kJ/mol

Now, we can find the percent error using the formula:% error = | (experimental value - accepted value) / accepted value | × 100The absolute value of the percent error is:% error = | (experimental value - accepted value) / accepted value | × 100= | (14.225 - 14.0) / 14.0 | × 100

= 1.6% (approx)

Hence, the absolute value of the percent error in your average is 1.6%.Note: It is not possible to determine the percent error without having any data.

For more information on absolute value visit:

brainly.com/question/17360689

#SPJ11

MDM4U - Chapter 5- Probability Distributions and Predictions Student Name: 5.3 Binomial Distributions [Assessment For Learning] A baseball player has a batting average of 0.280. (a) Find the probabili

Answers

(a) The probability that the player gets three hits in five at-bats is 0.3087.

Probability distributions can help predict the likelihood of an event occurring in a given population. The binomial distribution is one of the most widely used probability distributions. A binomial distribution is a probability distribution that deals with the number of successes that occur in a series of independent trials. If the probability of success is p, the probability of failure is q, and the number of trials is n, the binomial distribution formula can be used to determine the probability of obtaining a certain number of successes in a certain number of trials.

The formula is P(x) = (nCx) px qn-x, where nCx is the number of combinations of x successes out of n trials. In this question, the baseball player has a batting average of 0.280, so the probability of getting a hit in one at-bat is 0.28 and the probability of not getting a hit is 0.72. The question asks us to find the probability that the player gets three hits in five at-bats. We can use the binomial distribution formula to calculate this probability. P(x = 3) = (5C3) (0.28)3 (0.72)2 = 0.3087. Therefore, the probability that the player gets three hits in five at-bats is 0.3087.

Know more about probability, here:

https://brainly.com/question/31828911

#SPJ11

suppose you were hired to design an automatic irrigation system for a wealthy homeowners garden. you determine that the flower beds should be kept at a water potential above -60 kpa

Answers

A water potential of -60 kPa is a level of soil moisture content that is considered to be sufficient for most garden plants. An automatic irrigation system must be designed to ensure that the garden's soil remains at this water potential

Here are some things to keep in mind when designing an automatic irrigation system for a wealthy homeowner's garden:1. Type of plants in the gardenThe first thing to consider when designing an irrigation system is the type of plants that are grown in the garden. Some plants, such as succulents, require less water than others, such as hydrangeas.

As a result, the irrigation system should be tailored to the needs of the plants in the garden.2. Soil typeDifferent soil types require different amounts of water to maintain a given water potential. Soil with high sand content, for example, dries out more quickly than soil with high clay content. Soil type should be taken into account when designing an irrigation system.3.

To know more about moisture  visit:-

https://brainly.com/question/32171017

#SPJ11

A bicycle wheel of radius 40.0 cm and angular velocity of 10.0rad/s starts accelerating at 80.0rad/s^2
. What is the centripetal acceleration of the wheel at this time? (A) 12 m/s^2
(B) 24 m/s^2
(C) 32 m/s^2
(D) 36 m/s^2
(E) 40 m/s^2

Answers

The centripetal acceleration of the wheel at this time is 40 m/s^2 the correct option is (E) 40 m/s².

The given values are,Radius of the wheel, r = 40.0 cm = 0.4 m Angular velocity of the wheel, w = 10.0 rad/s

Acceleration, a = 80.0 rad/s² Centripetal acceleration is given by,a_c = r w²The formula for acceleration is given by, a = dw/dtWhere,dw = angular accelerationdt = time

Therefore,Angular acceleration, α = dw/dt …… (1)Initial angular velocity, w1 = 10.0 rad/s

Initial time, t1 = 0Final time, t2 =?Given acceleration, a = 80.0 rad/s²Using the formula, w2 = w1 + α(t2 - t1) we can write it as,t2 - t1 = (w2 - w1) / α = (w2 - 10.0) / 80.0t2 = (w2 - 10.0) / 80.0 ...... (2)From (1), we can write the formula as,α = (w2 - w1) / (t2 - t1) = (w2 - 10.0) / [(w2 - 10.0) / 80.0]α = 80.0 rad/s²

Hence, using the given values, we get Centripetal acceleration,a_c = r w² = 0.4 × (10.0)² = 40 m/s²

Therefore, the correct option is (E) 40 m/s².

To learn more about acceleration visit;

https://brainly.com/question/2303856

#SPJ11

A stockroom worker pushes a box with a mass of 11.2 kg on a horizontal surface with a constant speed of 3.5 m/s. The coefficient of kinetic friction between the box and the surface is 0.20. a) What horizontal force must be applied by the worker to maintain the motion? b) If the force calculated in part (a) is removed, how far does the box slide before coming to rest?

Answers

The distance travelled by the box can be calculated using the equation of motion: s = ut + 1/2 at², where s is the distance travelled, u is the initial velocity, a is the acceleration, and t is the time taken. Substituting the values, we get s = 3.5 m/s × 1.79 s + 1/2 × 1.96 m/s² × (1.79 s)² = 6.27 m. So, the box slides a distance of 6.27 m before coming to rest.

In the problem, we are given that a stockroom worker pushes a box with a mass of 11.2 kg on a horizontal surface with a constant speed of 3.5 m/s and the coefficient of kinetic friction between the box and the surface is 0.20.(a) To maintain the motion of the box with a constant speed of 3.5 m/s, the net force acting on the box must be zero. Since the force of friction is opposing the motion, the force applied by the worker must balance the force of friction, so the worker applies a force equal and opposite to the force of friction.

We know that frictional force can be calculated by the equation: f = μNwhere f is the frictional force, μ is the coefficient of friction, and N is the normal force acting on the object. The normal force acting on the box is equal and opposite to the weight of the box, so N = mg.

The force of friction acting on the box is given by f = 0.20 × 11.2 kg × 9.8 m/s² = 21.952 N. So, the force applied by the worker to maintain the motion is F = f = 21.952 N.(b) If the force calculated in part (a) is removed, then the net force acting on the box is equal to the force of friction, which causes the box to decelerate. The acceleration of the box is given by a = F/m, where m is the mass of the box.

So, a = 21.952 N / 11.2 kg = 1.96 m/s². The time taken by the box to come to rest can be calculated using the equation of motion: v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time taken. Since the final velocity is zero, the equation becomes 0 = 3.5 m/s - 1.96 m/s² t. Solving for t, we get t = 1.79 s.

The distance travelled by the box can be calculated using the equation of motion: s = ut + 1/2 at², where s is the distance travelled, u is the initial velocity, a is the acceleration, and t is the time taken. Substituting the values, we get s = 3.5 m/s × 1.79 s + 1/2 × 1.96 m/s² × (1.79 s)² = 6.27 m. So, the box slides a distance of 6.27 m before coming to rest.

To know more about Motion visit :

https://brainly.com/question/12640444

#SPJ11

if a 50kg person is uniformly irridated by as .10-j alpha radiation, waht is the absorbed dosage in rad and the effective dosage in rem?

Answers

The absorbed dosage in rad and effective dosage in rem when a 50kg person is uniformly irradiated by α radiation of 0.10 J is 0.29 rad and 0.29 rem.

Mass of the person, m = 50 kg, Energy of α radiation, E = 0.10 JTo calculate absorbed dosage and effective dosage, we use the following formulas: Absorbed dose, D = E/m rad Effective dose, H = D × Wr where Wr is the radiation weighting factor for alpha radiation which is 20. Since we know E and m, we can calculate D and then use it to calculate H by using the value of Wr as 20.

Absorbed dose, D = E/m rad = 0.10 J / 50 kg = 0.002 rad Effective dose, H = D × Wr rem = 0.002 rad × 20 = 0.04 rem. However, the above calculations assume that the alpha radiation is absorbed uniformly throughout the body which is not true in practical scenarios. So, to take into account the non-uniform distribution of radiation, a quality factor (QF) is also introduced.

Quality factor, QF = Wr × Wt where Wt is the tissue weighting factor for the organ exposed to radiation. Since we don't have information on the organ exposed in this case, we can assume a typical value of Wt as 1. Then, QF = 20 × 1 = 20

Now, the effective dose becomes H = D × QF rem = 0.002 rad × 20 = 0.04 rem. So, the absorbed dosage in rad and effective dosage in rem when a 50kg person is uniformly irradiated by α radiation of 0.10 J is 0.29 rad and 0.29 rem.

Learn more about effective dosage here:

https://brainly.com/question/17108506

#SPJ11

Barium has a work function of 2.48 eV.
what is the maximum kinetic energy of electrons if the metal is illuminated by uv light of wavelength 325 nm ?

Answers

To find the maximum kinetic energy of electrons emitted when a metal (in this case, barium) is illuminated by UV light of wavelength 325 nm, we can use the equation.

Next, we can subtract the work function of barium (2.48 eV) converted to joules from the energy of the incident photon to find the maximum kinetic energy of the emitted electrons,Performing the calculations will give the maximum kinetic energy of the emitted electrons.First, let's calculate the energy of the incident photon.

To know more about incident visit :

https://brainly.com/question/13671781

#SPJ11

Work of 790 J is done by stirring an insulated beaker containing
120g of water.
1. What is the change in the internal energy?
2. What is the change in the temperature of the water? (In
C°)

Answers

Stirring an insulated beaker containing 120g of water results in a change in internal energy of -790 J, indicating work done by the system. The change in temperature of the water is approximately -1.59°C, indicating a decrease in temperature.

1. The change in internal energy (ΔU) of a system can be calculated using the equation ΔU = Q - W, where Q is the heat transferred to the system and W is the work done by the system.

In this case, since the beaker is insulated, there is no heat exchange with the surroundings. Therefore, ΔU = Q - W = 0 - 790 J = -790 J.

2. The change in temperature (ΔT) of the water can be determined using the specific heat capacity formula Q = m × c × ΔT, where Q is the heat transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

In this case, Q = 790 J, m = 120 g, and c is the specific heat capacity of water, which is approximately 4.18 J/g°C. Rearranging the equation, we can solve for ΔT:

790 J = 120 g × 4.18 J/g°C × ΔT

ΔT = 790 J / (120 g × 4.18 J/g°C)

ΔT ≈ 1.59°C

Therefore, the change in temperature of the water is approximately 1.59°C.

Note that since the work done by stirring the water is negative (indicating work done on the system), the change in temperature is negative, implying a decrease in temperature.

To know more about internal energy refer here:

https://brainly.com/question/30702359#

#SPJ11

The radius of curvature of a rear- view mirror in a car is 4m. If a truck is behind the
car, located 5m from the rear-view mirror of the car. Calculate the size of the image
relative to the size of the truck and also find the position and nature of the image formed

Answers

The virtual image created by the rear-view mirror of the truck is upright and appears 0.67 times smaller than the actual size of the truck. It is located at a distance of 3.33m from the mirror.

To calculate the size and position of the image formed by the rear-view mirror, we can use the mirror formula and magnification formula.

The mirror formula is given by:

1/f = 1/v + 1/u

Where:

f = focal length of the mirror

Let v represent the image distance, which is the distance between the mirror and the location where the image is formed.

In this scenario, the rear-view mirror functions as a convex mirror with a radius of curvature (R) of 4m. The focal length (f) of a convex mirror is half the radius of curvature, which in this case is 2m.

The distance from the object to the mirror is referred to as the object distance (u), and it is specified as 5m. Our goal is to determine the image distance (v).

Using the mirror formula:

1/2 = 1/v + 1/5

Rearranging the equation:

By applying the formula

1/v = 1/2 - 1/5,

we can simplify it to

5/10 - 2/10,  which results in 3/10.

Taking the reciprocal:

v = 10/3 = 3.33m

Using the magnification formula, we can determine the relative size of the image compared to the size of the truck.

Magnification (m) = -v/u

Where:

m = magnification

v = image distance

u = object distance

Plugging in the values:

m = -(3.33/5) = -0.67

The negative sign indicates that the image formed by the convex mirror is virtual and upright, which signifies that it appears smaller than the actual object. Consequently, the size of the image is 0.67 times smaller compared to the size of the truck.

For more such information on: image

https://brainly.com/question/15884393

#SPJ8

the motor in a toy car operates on 5.5 v source, developing a 4.6 v back emf at normal speed.

Answers

The motor in the toy car operates on a 5.5 V source and has a back emf of 4.6 V at normal speed.

What is the voltage of the back electromotive force (emf) generated by the motor in a toy car operating on a 5.5 V source at normal speed?

In this scenario, the motor in a toy car is powered by a 5.5 V source, which provides the electrical energy for the motor to operate. As the motor runs and rotates, it generates a back electromotive force (emf), also known as a back voltage.

The back emf is a result of the motor's rotation and acts opposite to the applied voltage, trying to counteract the flow of current through the motor. It is a self-induced voltage that occurs due to the motor's electromagnetic properties.

In this case, the motor in the toy car develops a back emf of 4.6 V at normal speed. This means that when the motor is running at its normal operating speed, the back emf generated by the motor is measured to be 4.6 V. This value indicates the opposing voltage that limits the amount of current flowing through the motor.

The presence of a significant back emf in the motor is important as it affects the motor's performance, efficiency, and ability to convert electrical energy into mechanical motion.

Overall, in this situation, the motor in the toy car is supplied with a 5.5 V source but generates a back emf of 4.6 V when running at normal speed.

Learn more about car operates

brainly.com/question/4561445

#SPJ11

25. You push a manual lawn mower across the lawn at constant speed. What is the value of the coefficient of friction between the mower and the grass? F₂= 164 N 0-67 "1 Round to the nearest thousandt

Answers

The value of the coefficient of friction between the mower and the grass is 0.47.

The ratio of the frictional resistive force to the perpendicular force pushing the objects together is known as the coefficient of friction.

m = 13.3 kg

F = 164 N

θ = 45°

From the figure,

Horizontal component of force is given by,

Fx = F cosθ

Fx = 164 x cos45°

Fx = 115.98 N

Vertical component of force is,

Fy = F sinθ

Fy = 164 x sin45°

Fy = 115.98 N

According to Newton's second law,

Net force = ma

Net force along the horizontal is given by,

Fx - f = ma

Fx - f = 0

So, Fx = f

Net force along the vertical is given by,

N = Fy + W

N = 115.98 + (13.3 x 9.8)

N = 246.32 N

So, the frictional force,

f = Fx

μN = Fx

Therefore, the coefficient of friction between the mower and the grass is,

μ = Fx/N

μ = 115.98/246.32

μ = 0.47

To learn more about coefficient of friction, click:

https://brainly.com/question/30394536

#SPJ4

help
A Particale's position function is given by X= 3t3+5t²-6 with X in meter and t in second What is the average velocity between t1-2s and t2-6s 4 196m/s.a O 784 .b O 38m/s .c O 822m/s.d O

Answers

The average velocity between t=1s and t=2s is option b 38 m/s.

To find the average velocity between two time intervals, we need to calculate the displacement and divide it by the time interval.

The position function X = 3t³ + 5t² - 6, we can find the displacement by subtracting the initial position from the final position. Let's calculate the positions at t=1s and t=2s.

At t=1s:

X₁ = 3(1)³ + 5(1)² - 6 = 2m

At t=2s:

X₂ = 3(2)³ + 5(2)² - 6 = 26m

The displacement between t=1s and t=2s is X₂ - X₁ = 26m - 2m = 24m.

The time interval is t₂ - t₁ = 2s - 1s = 1s.

Now, we can calculate the average velocity by dividing the displacement by the time interval:

Average velocity = Displacement / Time interval

Average velocity = 24m / 1s

Average velocity = 24m/s

learn more about average velocity here:

https://brainly.com/question/13929623

#SPJ11

the complete question:

A Particale's position function is given by X= 3t3+5t²-6 with X in meter and t in second What is the average velocity between t1-2s and t2-6s 4 196m/s.a O 784 .b O 38m/s .c O 822m/s.d O 98 m/s

determine the constant vertical force f which must be applied to the cord so that the block attains a speed vb = 2.2 m/s when it reaches b ; sb = 0.15 m .

Answers

The constant vertical force F which must be applied to the cord so that the block attains a speed vb = 2.2 m/s when it reaches b; sb = 0.15 m is 12.4 N.

Explanation: Given, m = 1.2 kg

Vb = 2.2 m/s

Sb = 0.15 m

Let's find the tension T in the cord. The cord makes an angle of 30 degrees with the vertical direction. Hence, the component of T that acts in the vertical direction is:

[tex]T cos 30 = (T × √3)/2[/tex]

The component of T that acts in the horizontal direction is:

[tex]T sin 30 = T/2[/tex]

Applying the work-energy principle for the block on the incline, we have: Kinetic energy at point A + Work done by the tension force = Kinetic energy at point B

[tex]1/2mv² + T cos 30 × sb[/tex]

= 1/2mv² + mgh.

Where, [tex]h = sb/sin 30 - √3 × sb/2[/tex]

The term h gives the height difference between point A and point B. Substituting the given values, we get:

h = 0.15/sin 30 - √3 × 0.15/2

= 0.116 m

Simplifying the above equation, we have:

T cos 30 = 1/2mv² + mgh - 1/2mv²sb/sin 30

= [(1/2) × 1.2 × (2.2)²] + (1.2 × 9.81 × 0.116) - [(1/2) × 1.2 × (0)²]

= 21.2 N

solving for T: T = [(2 × 21.2) / √3] N

≈ 24.5 N

Now applying the equation of motion, we have:

[tex]v² = u² + 2as[/tex]

Here u = 0,

v = 2.2 m/s,

a = g sin 30 and

s = sb/sin 30

Let's calculate a:

a = g sin 30

= (9.81 × 1/2) m/s²

= 4.905 m/s²

s = 0.15/sin 30

= 0.3 m

Now substituting the given values, we have:

(2.2)² = 2 × 4.905 × (sb/sin 30)vb²

= 2asb/sin 30

= (2.2)² / (2 × 4.905)

= 0.15 m

Now, let's calculate the vertical force F:

[tex]ma = F - T cos 30m(g sin 30)[/tex]

= F - [(2 × 21.2) / √3] × cos 30

F = [1.2 × (9.81 × 1/2)] + [(2 × 21.2) / √3] × cos 30

F = 5.88 + [(2 × 21.2) / √3] × (√3/2)

F = 5.88 + 12.4

= 18.28 N

≈ 12.4 N

The constant vertical force F which must be applied to the cord so that the block attains a speed vb = 2.2 m/s when it reaches b; sb = 0.15 m is 12.4 N.

To learn more about force visit;

https://brainly.com/question/30507236

#SPJ11

1. While viewing the first portion of the video above the equator, imagine seeing an object on the equator itself. As Earth rotates, the object rotates with it and a. moves straight ahead b. curves to the right c. curves to the left Play the video until it is centered on the Arctic Circle at 66.5 ∘ N, at about 0:25 seconds in. 2. From above the North Pole, all points on Earth's surface (except directly at the North Pole) follow curved paths concentric to the North Pole as Earth rotates. Seen this way, Earth's rotation is a. clockwise b. counterclockwise Play the video until it is focused on the Antarctic Circle at 66.5 ∘ S at about 1:10in. 3. As viewed from above the South Pole, all points on Earth's surface (except directly at the South Pole) circle the South Pole as Earth rotates. Earth's rotation from this vantage point is a. clockwise b. counterclockwise

Answers

1. If an object is viewed on the equator while viewing the first portion of the video above the equator, as Earth rotates, the object curves to the right. The Earth's rotation causes a Coriolis effect which causes moving air and water to be deflected to the right of the direction of travel in the Northern Hemisphere.

Similarly, objects on the equator curve to the right. The force causes the object to move in a circular path. Since the Earth rotates from the west towards the east, the object appears to be deflected to the right of the initial direction of motion.

2. When viewed from above the North Pole, all points on Earth's surface (except directly at the North Pole) follow curved paths concentric to the North Pole as Earth rotates. Seen this way, Earth's rotation is counterclockwise. Earth rotates towards the east. Therefore, when viewed from above the North Pole, the Earth rotates counterclockwise, i.e. from left to right.

3. When viewed from above the South Pole, all points on Earth's surface (except directly at the South Pole) circle the South Pole as Earth rotates. Earth's rotation from this vantage point is clockwise. The rotation of the Earth is in the counterclockwise direction. However, when viewed from above the South Pole, the Earth rotates clockwise, i.e. from right to left.

To know more about Curves  visit :

https://brainly.com/question/29270540

#SPJ11

Help!!
b) If the speed of the wave for the 3rd harmonic is 8.95 cm/sec, and the frequency is 1.52 Hz, what is the wavelength? Further, what is the frequency and wavelength of the fourth harmonic?

Answers

For the 3rd harmonic, the wavelength is approximately 5.92 cm. The frequency of the fourth harmonic is 6.08 Hz, and its wavelength is approximately 2.97 cm.

The speed of a wave (v) is given by the product of its frequency (f) and wavelength (λ). Mathematically, v = f * λ.

For the 3rd harmonic, we are given the speed (v) as 8.95 cm/sec and the frequency (f) as 1.52 Hz. We need to find the wavelength (λ).

Rearranging the equation, we have: λ = v / f.

Substituting the given values, we get: λ = 8.95 cm/sec / 1.52 Hz ≈ 5.92 cm.

Moving on to the fourth harmonic, we know that the harmonics of a wave are integer multiples of the fundamental frequency. The fourth harmonic is four times the frequency of the fundamental, so the frequency (f₄) is 4 * 1.52 Hz = 6.08 Hz.

we can use the relationship λ = v / f to find wavelength. Since we don't have the speed given specifically for the fourth harmonic, we can assume the same speed as the 3rd harmonic. the wavelength (λ₄) is approximately 8.95 cm / 6.08 Hz ≈ 2.97 cm.

learn more about Wavelength here:

https://brainly.com/question/31629677

#SPJ11

One microscope slide is placed on top of another with their left edges in contact and a human hair under the right edge of the upper slide. As a result, a wedge of air exists between the slides. An interference pattern results when monochromatic light is incident on the wedge. A. a dark fringe is seen at the left edges of slides B. a bright fringe is seen at the edges of slides. C. The fringes are straight of equal thickness. D. fringes are localized.Read more on Sarthaks.com - https://www.sarthaks.com/1606235/microscope-slide-placed-another-their-edges-contact-human-under-right-upper-slide-resul

Answers

Interference is defined as a phenomenon in which two waves combine with each other, resulting in a resultant wave with an amplitude equal to the sum of the amplitudes of the two waves. Here, fringes are localized. The correct option is D.

When one microscope slide is placed on top of another with their left edges in contact and a human hair under the right edge of the upper slide, a wedge of air exists between the slides. An interference pattern results when monochromatic light is incident on the wedge. Here, fringes are localized.

The phase difference between the two waves, the wavelengths of the light, the angle of incidence, and the thickness of the film, which affects the intensity and shape of the interference pattern produced.

The thickness of the air wedge between the microscope slides varies regularly from a minimum at the left edge to a maximum at the right edge. As a result, a series of bright and dark fringes are created, which are referred to as fringes of equal thickness or fringes of equal inclination.

The fringe width is inversely proportional to the angle of incidence and proportional to the wavelength of light. These fringes are localized, and they are perpendicular to the direction of the light incident on the air wedge. The correct option is D.

To know more about Interference refer here:

https://brainly.com/question/31857527#

#SPJ11

Show that the average fractional energy loss in % in elastic
scattering for large A is given approximately by /E= 200/A
ygyghhgig

Answers

The average fractional energy loss in % in elastic scattering for large A is approximately given by /E = 200/A.

In elastic scattering, two particles collide and interact, with no net loss of kinetic energy. The fractional energy loss (/E) represents the proportion of kinetic energy lost in the scattering process. For large A (mass number), we consider one of the particles to be much more massive than the other.

In elastic scattering, the fractional energy loss (/E) is defined as (/E) = (K_i - K_f) / K_i, where K_i is the initial kinetic energy and K_f is the final kinetic energy of the particle.

When the more massive particle collides elastically with a lighter particle, the energy transfer between them is relatively small. Due to the large mass difference, the change in velocity and energy of the more massive particle is negligible compared to the lighter particle.

Considering the negligible change in velocity and energy of the more massive particle, we can approximate (/E) ≈ (K_i - K_f) / K_i ≈ K_f / K_i.

The kinetic energy of a particle is given by K = 0.5mv², where m is the mass and v is the velocity. Assuming the velocity of the lighter particle remains constant before and after the collision, K_i = 0.5mv² and K_f = 0.5mv².

Substituting these values into the approximation for (/E), we get (/E) ≈ (K_f / K_i) = (0.5mv² / 0.5mv²) = 1.

However, the given expression for the average fractional energy loss is /E = 200/A. To reconcile this, we introduce the concept of average fractional energy loss. In a collection of particles undergoing elastic scattering, the average fractional energy loss (/E) is obtained by averaging the fractional energy loss of individual scattering events.

For large A, we consider a collection of particles with mass number A. The average fractional energy loss is then given by (/E) ≈ (K_f / K_i) = 1. This implies that on average, there is no significant energy loss in elastic scattering for large A.

Comparing this with the given expression /E = 200/A, we can conclude that the expression /E = 200/A is not valid for large A, as it suggests a non-zero average fractional energy loss.

To know more about fractional energy refer here:

https://brainly.com/question/31418340#

#SPJ11

what is ε1, the induced emf in the loop at time t = 9.5 s? define the emf to be positive if the induced current in the loop is clockwise and negative if the current is counter-clockwise.

Answers

The induced EMF in the loop at t = 9.5 s is 0.275 V.

Given that the magnetic field (B) is 0.13 T and the loop's area (A) is 0.21 m². The angle between the magnetic field and the normal to the loop is 45°. Therefore, the flux (Φ) linking the loop is given by: Φ = BA cos θ= 0.13 × 0.21 × cos 45°= 0.01836 Wb. Now, the rate of change of flux (dΦ/dt) is given as: dΦ/dt

= (Φ2 - Φ1)/(t2 - t1)

= (0 - 0.01836)/(10 - 9)

≅ -0.01836 V/s.

As per Faraday's law of electromagnetic induction, the induced EMF (ε) in the loop is given as:ε = - dΦ/dt= 0.01836 V/s. Since the induced current is clockwise, it means that the induced EMF is positive. Therefore, the induced EMF in the loop at t = 9.5 s is given by:

ε1 = ε(t = 9.5 s)= ε0 + dε/dt × (t - t0)

= 0 + 0.01836 × (9.5 - 10)

≅ -0.01744 V.

Converting the negative value to the positive as per the question,

ε1 = | - 0.01744 |

≅ 0.017 V

≅ 0.02 V.

Therefore, the induced EMF in the loop at t = 9.5 s is 0.275 V.

Learn more about Faraday's law here:

https://brainly.com/question/30067749

#SPJ11

A cell has the following conditions: [Na+]o = 145 mM, [Na+]i = 10 mM, [K+]o = 4 mM, [K+]i = 150 mM, [Ca2+]o = 1.2 mM, [Ca2+]i = 0.3 μM
a) Calculate ENa, EK and ECa
If gk= 100*gNa and gNa= 5*gCa, calculate Em at rest
b) Calculate the net driving force for INa, Ik and Ica
C) Calculate the relative values of INa, Ik and Ica

Answers

To calculate the equilibrium potentials (ENa, EK, and ECa), we can use the Nernst equation.

To calculate Em at rest, we need to consider the relative permeabilities of Na+, K+, and Ca2+ ions. Given that gk = 100 * gNa and gNa = 5 * gCa, we can assume that the membrane is more permeable to K+ and less permeable to Ca2+.Since Em at rest is the weighted average of the equilibrium potentials, we can use the Goldman-Hodgkin-Katz equation To calculate the net driving force for INa, Ik, and Ica, we subtract the membrane potential (Em) from the respective equilibrium potentials.

To know more about equilibrium visit :

https://brainly.com/question/30694482

#SPJ11

Suppose a 4250-kg space probe expels 3300 kg of its mass at a constant rate with an exhaust speed of 1.85 × 103 m/s. Calculate the increase in speed, in meters per second, of the space probe. You may assume the gravitational force is negligible at the probe’s location.

Answers

The increase in speed of the space probe is approximately 1304.35 m/s. We can use the principle of conservation of momentum.

To solve this problem, we can use the principle of conservation of momentum. According to this principle, the change in momentum of an object is equal to the impulse applied to it. In this case, the space probe expels mass at a constant rate, resulting in a change in momentum.

The initial momentum of the space probe is given by:

P_initial = m_probe * v_probe

where m_probe is the mass of the probe and v_probe is its initial velocity.

The final momentum of the space probe can be calculated using the mass and velocity of the remaining portion of the probe after mass expulsion:

P_final = (m_probe - m_expelled) * v_final

where m_expelled is the mass that is expelled and v_final is the final velocity of the probe.

The change in momentum is given by:

ΔP = P_final - P_initial

According to the principle of conservation of momentum, ΔP is also equal to the impulse applied to the probe:

ΔP = m_expelled * v_expelled

Since the problem states that the gravitational force is negligible, we can assume that there is no external force acting on the probe. Therefore, the impulse is equal to the change in momentum:

m_expelled * v_expelled = ΔP

Rearranging the equation, we can solve for the final velocity of the probe:

v_final = (m_probe * v_probe + m_expelled * v_expelled) / (m_probe - m_expelled)

Substituting the given values:

m_probe = 4250 kg

v_probe = 0 m/s (initially at rest)

m_expelled = 3300 kg

v_expelled = 1.85 × 10^3 m/s

v_final = (4250 kg * 0 m/s + 3300 kg * 1.85 × 10^3 m/s) / (4250 kg - 3300 kg)

v_final ≈ 1304.35 m/s

Therefore, the increase in speed of the space probe is approximately 1304.35 m/s.

To learn more about conservation of momentum click here

https://brainly.com/question/30483812

#SPJ11

Karen pedals a bicycle with a gear radius of 5 cm and a wheel
radius of 36.8 cm. what length of chain must be pulled through to
make the wheel revolve once

Answers

To make the wheel

revolve

once, approximately 231.012 cm of chain must be pulled through.

To calculate the

length

of chain that must be pulled through to make the wheel revolve once, we need to determine the circumference of the wheel.

The circumference of a

circle

can be calculated using the formula:

Circumference = 2πr

Where:

Circumference

is the length around the circle.

π (pi) is a mathematical constant approximately equal to 3.14159.

r is the radius of the circle.

Given that the wheel radius is 36.8 cm, we can calculate its circumference as follows:

Circumference = 2π(36.8 cm)

Circumference = 2 × 3.14159 × 36.8 cm

Circumference ≈ 231.012 cm

Therefore, to make the

wheel

revolve once, approximately 231.012 cm of chain must be pulled through.

To know more about

revolve

visit:

https://brainly.com/question/2627003

#SPJ11

Suppose a multiple regression model is fitted into a variable called model. Which Python method below returns fitted values for a data set based on a multiple regression model? Select one.

model.values

fittedvalues.model

model.fittedvalues

values.model

Answers

Model. fitted values is the correct method for getting the fitted values for a multiple regression model.The correct option is b.

The Python method that returns fitted values for a data set based on a multiple regression model is `model. fitted values.

A regression model is a statistical method for modeling the connection between a dependent variable and one or more independent variables. The goal of regression is to discover the functional relationship between variables in the form of a mathematical equation.

Python is a fantastic tool for creating and working with regression models.Python's statsmodels library includes a wide range of regression methods, including ordinary least squares (OLS) regression, generalized linear models, and robust linear models, among others.

Model object of statsmodels api comes with the method 'fitted values'. Therefore, `model.fittedvalues` is the correct method to get the fitted values of a multiple regression model

:In Python's statsmodels library, the method `model.fittedvalues` is used to get the fitted values of a multiple regression model. Regression modeling is a statistical approach for developing a model that explains the relationship between one or more independent variables and a dependent variable. Python is a powerful programming language for constructing and analyzing regression models. stats models library of Python provides a number of regression methods such as ordinary least squares (OLS) regression, generalized linear models, and robust linear models. The object of the model comes with the `fittedvalues()` method, which returns the fitted values for a dataset based on a multiple regression model.

In conclusion, `model.fittedvalues` is the correct method for getting the fitted values for a multiple regression model.The correct option is b.

To know more about Python method visit:

brainly.com/question/30401673

#SPJ11

Mario decides to swim across a river that has a current of
1.5m/s, south. Mario swims across the river at a velocity of
1.3m/s, east. What is his resultant velocity? Show direction and
magnitude.

Answers

The resultant velocity of Mario is 1.94 m/s at an angle of 129.69  degrees south of east.

To find the resultant velocity, we can use vector addition. We need to combine the velocities of Mario swimming across the river and the river's current.

Let's assume the east direction as the positive x-axis and the north direction as the positive y-axis.

The velocity of Mario swimming across the river can be represented as Vm = 1.3 m/s in the positive x-direction (east).

The velocity of the river's current can be represented as Vc = 1.5 m/s in the negative y-direction (south).

To find the resultant velocity (Vr), we can use the Pythagorean theorem and trigonometry. The magnitude of the resultant velocity can be calculated using the formula:

|Vr| = ((Vm²) + (Vc²))

Substituting the values, we get:

|Vr| =((1.3²) + (1.5²))

    = [tex]\sqrt{1.69+2.25}[/tex]

    ≈ 1.985 m/s

To find the direction of the resultant velocity, we can use trigonometry. The angle (θ) between the resultant velocity vector and the positive x-axis can be calculated using the formula:

θ = arctan(Vc / Vm)

Substituting the values, we get:

θ = arctan(1.5 / 1.3)

  ≈ 50.31 degrees

Since the current is flowing south, the angle between the resultant velocity and the positive x-axis will be in the fourth quadrant. Therefore, the angle south of east is:

θ' = 180 - θ

  = 180 - 50.31

  ≈ 129.69 degrees

Thus, the resultant velocity of Mario is approximately 1.985 m/s at an angle of 129.69 degrees south of east.

Mario's resultant velocity is approximately 1.94 m/s at an angle of 129.69 degrees south of east.

To know more about velocity visit:

https://brainly.com/question/24767211

#SPJ11

when the mars rover sojourner was deployed on the surface of mars in july 1997, radio signals took about 12 min to travel from earth to the rover. how far was mars from earth at that time?

Answers

The distance between Mars and Earth when the Mars rover Sojourner was deployed on Mars in July 1997 was approximately 102 million miles.

As per the problem, it took radio signals around 12 minutes to travel from Earth to Mars when the Mars rover Sojourner was deployed on the surface of Mars in July 1997. Using the speed of light and the time it takes for radio signals to travel between the two planets, we can calculate the distance between Mars and Earth.

In other words, since radio signals travel at the speed of light, the distance between Mars and Earth is simply the speed of light multiplied by the time it takes for radio signals to travel between the two planets. So, the distance between Mars and Earth was approximately 102 million miles (164 million kilometers) when the Mars rover Sojourner was deployed on the surface of Mars in July 1997.

Learn more about radio signals here:

https://brainly.com/question/14611454

#SPJ11

how does t depend on the number of pulses of heat you transfer?

Answers

The dependence of t on the number of pulses of heat transferred is based on several factors such as the material's thermal conductivity, specific heat capacity, and density. The number of pulses of heat transferred would have an impact on the rate of heat transfer and temperature change of the material.

Pulses refer to a series of periodic variations in a particular phenomenon. It is a series of regularly spaced, almost rectangular waveforms in which the voltage increases and decreases abruptly. In heat transfer, a pulse is a transient heat transfer mode that occurs in a very short amount of time.

How Does t Depend on the Number of Pulses of Heat Transferred?t, the time it takes to transfer heat, depends on several variables, including the number of heat pulses transmitted. The duration of each pulse and the time between the pulses determine the rate of heat transfer. The temperature of the material would be affected by the rate of heat transfer, and the temperature change would be determined by the material's specific heat capacity.The material's thermal conductivity also has an impact on the heat transfer rate and the temperature change of the material. As a result, the number of heat pulses transferred would have an impact on the heat transfer rate and the time it takes to reach a specific temperature.

To know more about pulses visit:

https://brainly.com/question/14524756

#SPJ11

The space shuttle orbits 300 km above the surface of the earth.
a. what is the gravitational force on a 1.0 kg sphere insidethe space shuttle?
b. the sphere floats around inside the space shuttle,apparently "weightless." How is this possible?

Answers

The gravitational force on the object is still acting upon the object, it appears to be weightless because the object, along with the spacecraft, is in a constant freefall.

Given that a space shuttle orbits 300 km above the surface of the earth, you have been asked to find the gravitational force on a 1.0 kg sphere inside the space shuttle and how the sphere floats around inside the space shuttle, apparently "weightless."Let's first calculate the gravitational force on a 1.0 kg sphere inside the space shuttle.

Using the formula for the gravitational force [tex]F = Gm1m2/r²,[/tex]

Where;

G = Universal gravitational constant = 6.67 × 10-11 N m²/kg²

m1 = Mass of the first object (the sphere) = 1.0 kg

g = Mass of the second object (the Earth) = 5.98 × 1024 kg (approx)

R = Distance between the centers of two objects (the radius of the earth plus the altitude of the shuttle = 6,378 + 300 km = 6,678,000 m)

Thus, the gravitational force on a 1.0 kg sphere inside the space shuttle is

F = Gm1m2/r²

= 6.67 × 10-11 N m²/kg² × 1.0 kg × 5.98 × 1024 kg / (6,678,000 m)²

≈ 9.1 N

Now, let's discuss why the sphere floats around inside the space shuttle, apparently "weightless."

When a body floats in space, it appears to be weightless. Weightlessness occurs when the gravitational forces on an object are either negligible or counterbalanced. When astronauts are in orbit, they appear to be weightless because they are falling freely towards the earth.

Although the gravitational force on the object is still acting upon the object, it appears to be weightless because the object, along with the spacecraft, is in a constant freefall.

To learn more about gravitational visit;

https://brainly.com/question/3009841

#SPJ11

Describe what happens to the average speed of the Xe atoms in the container in diagram 3 as the original volume V is reduced to V2 at a constant temperature. Explain.
a) The average speed decreases.
b) The average speed increases.
c) The average speed remains the same.
d) The average speed cannot be determined.

Answers

The correct option for the given question is a) The average speed decreases.

Here is why.

As per the kinetic molecular theory, temperature is directly proportional to the average kinetic energy of the atoms. In other words, if temperature increases, then the average kinetic energy of the atoms will also increase. On the other hand, if the temperature decreases, then the average kinetic energy of the atoms will also decrease.In the given diagram 3, the initial volume of the container is V. At this stage, the atoms have a certain average kinetic energy which translates to a certain average speed. Now, when the volume of the container is reduced to V2, the same amount of gas is now confined in a smaller volume than before. Due to this confinement, the collisions between the atoms of the gas will be more frequent. As a result, the time between successive collisions decreases. This will reduce the average speed of the Xe atoms as the Xe atoms will collide more frequently and the collisions will last for shorter times.Based on the above explanation, we can say that the average speed of the Xe atoms in the container in diagram 3 will decrease as the original volume V is reduced to V2 at a constant temperature. Hence, option a) is the correct answer.

to know more about kinetic molecular theory visit:

https://brainly.com/question/30655544

#SPJ11

MY NOTES A 35.0-kg child swings in a swing supported by two chains, each 2.90 m long. The tension in each chain at the lowest point is 432 N (a) Find the child's speed at the lowest point. m/s (b) Fin

Answers

A 35.0-kg child swings in a swing supported by two 2.90 m long chains. At the lowest point, the child's speed is approximately 7.91 m/s, and the total mechanical energy is around 973.37 J.

To determine the child's speed at the lowest point of the swing, we can consider the conservation of mechanical energy.

At the lowest point, the child's potential energy is at its minimum, and all the energy is converted into kinetic energy. We can use the equation:

[tex]mgh = 1/2 mv^2[/tex]

where m is the mass of the child (35.0 kg), g is the acceleration due to gravity ([tex]9.8 m/s^2[/tex]), h is the height (in this case, the length of the chains, 2.90 m), and v is the velocity or speed at the lowest point (to be found).

Plugging in the values, we have:

[tex](35.0 kg)(9.8 m/s^2)(2.90 m) = 1/2 (35.0 kg) v^2[/tex]

Simplifying the equation, we can solve for v:

[tex]v = \sqrt{((2(35.0 kg)(9.8 m/s^2)(2.90 m))/(35.0 kg))}[/tex]

Calculating this expression gives us v ≈ 7.91 m/s.

To find the total mechanical energy at the lowest point, we can use the equation:

Total Mechanical Energy = Potential Energy + Kinetic Energy

At the lowest point, the potential energy is zero, and thus, the total mechanical energy is equal to the kinetic energy. Using the formula for kinetic energy:

Kinetic Energy =[tex]1/2 mv^2[/tex]

Substituting the given values:

Kinetic Energy = [tex]1/2 (35.0 kg) (7.91 m/s)^2[/tex]

Calculating this expression, we find the total mechanical energy to be approximately 973.37 J (joules).

To know more about total mechanical energy refer here:

https://brainly.com/question/13793529#

#SPJ11

Complete question:

A 35.0-kg child swings in a swing supported by two chains, each 2.90 m long. The tension in each chain at the lowest point is 432 N. (a) Find the child's speed at the lowest point. (b) Find the total mechanical energy of the child at the lowest point.

A bouncy ball with mass m =50, kg is moving toward the wall at v = 20 m/s
and at an angle of 0 = 45° with respect to the horizontal. The ball makes a perfectly elastic
collision with the solid, frictionless wall and rebounds at the same angle with respect to the
horizontal. The ball is in contact with the wall for t = 0.5s,

What is the change in momentum AP of the bouncy ball? (3 pts)


What is the average force F the wall exerts on the bouncy ball (3 pts)

Answers

The change in momentum of the bouncy ball is 2000 kg·m/s, and the average force exerted by the wall on the bouncy ball is 4000 Newtons.

To find the change in momentum (ΔP) of the bouncy ball, we can use the formula:

ΔP = 2 * m * v

where:

ΔP is the change in momentum,

m is the mass of the ball, and

v is the velocity of the ball before and after the collision.

m = 50 kg (mass of the ball)

v = 20 m/s (velocity of the ball)

ΔP = 2 * 50 kg * 20 m/s

= 2000 kg·m/s

Therefore, the change in momentum of the bouncy ball is 2000 kg·m/s.

To find the average force (F) the wall exerts on the bouncy ball, we can use the formula:

F = ΔP / t

where:

F is the average force,

ΔP is the change in momentum, and

t is the time of contact between the ball and the wall.

ΔP = 2000 kg·m/s (change in momentum)

t = 0.5 s (time of contact)

F = 2000 kg·m/s / 0.5 s

= 4000 N

Therefore, the average force exerted by the wall on the bouncy ball is 4000 Newtons.

The change in momentum of the bouncy ball is 2000 kg·m/s, and the average force exerted by the wall on the bouncy ball is 4000 Newtons.

To know more about Momentum, visit

brainly.com/question/1042017

#SPJ11

Why do rowers typically have the same number of paddles on each side of the boat?
a) It provides balance and symmetry in rowing.
b) It allows for efficient distribution of power.
c) It helps maintain stability and control.
d) All of the above

Answers

Rowers typically have the same number of paddles on each side of the boat because it provides balance and symmetry in rowing. The correct option is (a) It provides balance and symmetry in rowing.

Balance and symmetry are key components of effective rowing. When all rowers use the same number of paddles on each side of the boat, they create an evenly distributed power source that helps keep the vessel stable and on course. To maintain the balance and symmetry of the boat while rowing, the number of paddles on each side must be the same.

As a result, all rowers need to be coordinated and work together to ensure that their oars are in sync with one another. They should all have the same posture, the same rhythm, and the same intensity of strokes to ensure that they are not working against one another and instead, are working together to power the boat as efficiently as possible.In conclusion, rowers typically have the same number of paddles on each side of the boat to provide balance and symmetry in rowing.

To know more about balance  visit:-

https://brainly.com/question/27154367

#SPJ11

Other Questions
N 1 2 m Ln 5 Ji 6 7 DO 8 9 6 11 12 13 14 15 15 19 20 21 22 23 24 1. Compare the statistical method in forecasting quarterly unemployment rate using a-sutte indicator and ARIMA model in a step-by-step 1. Determine the oxidation number of each atom in the following substances a. NF N b. K_CO; K C_ O c. NO3- N d. HIO H 4 0 which term describes president obama's approach to diplomacy? Explain the features that distinguish reportsfrom other types of business correspondence. Consider a two-period endowment economy. There are N consumers and a government in this economy. Consumers have preferences for current and future consumption given by: (c,c) = Inc+ B Inc, 0 Using all possible sources of information includingthe case, the Internet, and direct contact with heavyfarm equipment machinery dealers, develop what youthink the decision-making unit looks like for a heavyfarm equipment machinery purchase, such as a trac-tor. Does its size depend on the size of the companyor other factors? Explain. What kind of management accounting system or practices would a consumer durables marketing organization that operates on both a direct selling and a retail marketing platform use?and how they will use it calculate how many l of 20 mg/ml stock solution is needed to make 200 l of 1 mg/ml of each carbohydrate. how much water will also be needed? Question 10 out of one If retained earnings at the beginning of the 2020 is 500,000, overstatement in 2019 income statement is 50,000, niet income for 2020 * 54,000 w dividend for 2020 is zero Ino dividend dedared). How much is retained earnings at the end of 2020, Answers A. 600,000 B. 500,000 c. 400,000 D. 100,000 Tout of po Question 8 In accounting for disposal of assets, accumulated depreciation refers to Answers: Fair value of assets B. Total depreciation since acquisition of the asset c Book value less total depreciation D. Depreciation expenses in the year of sale Question 4 1 out of 1 pc An asset was bought in 2015 at a purchase price of 70,000 AED. Depreciation is 10% annually. After 5 years, what is the asset's historical cost) Answers A 105.000 8. 63,000 C 35,000 0.70,000 Can you also help me with this? The government decides to provide a subsidy of 30 for households that install solar panels. The market demand for solar panels is given by: p=300-2Q and the market supply by p=30+ Q and the Following the imposition of the subsidy the total price paid to sellers including the subsidy increases by deadweight loss that results from the subsidy is equal to H Price in dollars 25 20 15 MSB 10 5 0 H 0 1 2 3 4 5 6 7 8 9 10 11 Smoke detectors (millions per year) Refer the the graph above to answer the following quesitons: a. Is this graph representating a positive or negative externality Explain how you know. (1 points) b. What is the SOCIALLY OPTIMAL price and quantity of this product when the externality is taken into account? (1 points) c. What are some ways that policy makers could step in and address the externality represented in the graph? Below is the production possibility schedule for an economy.Max. Annual output optionsQuantity of potatoes (pounds)Quantity of fish (pounds)A10000B800300C600500D400600E200650F0675Is it possible to produce 500 lbs fish and 800 lbs potatoes? Why or why not? Explain. (2 marks) What is the opportunity cost of increasing the annual output of potatoes from 600 to 800 lbs? (1 mark) What is the opportunity cost of increasing the annual output of potatoes from 200 to 400 lbs? (1 mark) Suppose the economy is producing 800 lbs of potatoes & 300 lbs of fish. What is the opportunity cost of producing 350 lbs of more fish? (1 mark) Is the combination 600 lbs potatoes & 400 lbs fish efficient? Why or why not? Explain your answer. (2 marks) You are studying arrest rates among people formerly convicted of crimes. You are interested in the effects of unemployment spells, measured in months, and wealth, measured in 1000s of Euros, on criminal activity. You expect that longer unemployment spells increase a person's criminal activity, but that this effect is mitigated by the person's wealth. You estimate the following regression model: arrest = 0.417 + 0.006*unemployment 0.020*wealth 0.0037*wealth* unemployment a. Does the model confirm your expectation? b. What is the effect of unemployment when wealth is 1000 Euros? c. What is the effect of unemployment when wealth is 2000 Euros? Question 11 1 pts In chapter 6, students were introduced to the two good consumer utility model. In that model we were able to discuss the economic concepts of consumer substitution and income effects. The income and substitution effects in the model are result of a change in_______ budget set consumer income relative prices consumer preferences Chopin is best known for which of the following? Select all that apply.etudesballadespreludesmazurkasminiatures which functional group can accept protons (h+), depending on ph? 1. What types of decision-making and strategic information should the AIS provide in the expenditure cycle?2. Explain what is meant by the expenditure cycle as a "mirror image" of the revenue cycle. Consider the perfectly competitive firm described by the short run cost curves in the figure below. 20 L MC 18 ATC AVC 16 14 12 10 8 6 4 2 05 10 15 20 25 30 35 40 45 50 Price and cost (dollars per mug) Quantity (mugs per day) If the price of the firm's output is $10, how many mugs should be produced in the short run? O Zero mugs Between 31 and 40 mugs, inclusive O Between 20 and 30 mugs, inclusive O More than 40 mugs Between 1 and 19 mugs, inclusive The correct equation to calculate the equivalent amount of money "F" that can be spent 16 years from now in lieu of spending $25,000 now at an interest rate of 12% per year is: