g Consider a mass-spring system where the spring constant is 5 N/m and the mass on the spring is 0.5 kg. The mass is moved a distance of -0.9 m from its equilibrium position. How much work is done by the spring

Answer:

7.8% of the original volume.

Explanation:

From the given information:

Temperature [tex]T_1[/tex] = 22° C = 273 + 22 = 295° C

Pressure [tex]P_1[/tex] = 240 kPa

Temperature [tex]T_2[/tex] = 45° C

At initial temperature and pressure:

Using the ideal gas equation:

[tex]P_1V_1 =nRT_1[/tex]

making V_1 (initial volume) the subject:

[tex]V_1 = \dfrac{nRT_1}{P_1}[/tex]

[tex]V_1 = \dfrac{nR*295}{240}[/tex]

Provided the pressure maintained its rate at 240 kPa, when the temperature reached 45° C, then:

the final volume [tex]V_2[/tex] can be computed as:

[tex]V_2 = \dfrac{nR*318}{240}[/tex]

Now, the change in the volume ΔV =  V₂ - V₁

[tex]\Delta V = \dfrac{nR*318}{240}- \dfrac{nR*295}{240}[/tex]

[tex]\Delta V = \dfrac{23nR}{240}[/tex]

∴

The required fraction of the volume of air to keep up the pressure at (240) kPa can be computed as:

[tex]= \dfrac{\dfrac{23nR}{240}}{ \dfrac{295nR}{240}}[/tex]

[tex]= {\dfrac{23nR}{240}} \times { \dfrac{240}{295nR}}[/tex]

[tex]= 0.078[/tex]

= 7.8% of the original volume.

Answer:

3.05×10⁵ Nm²C⁻¹

Explanation:

According to Gauss' law,

∅' = q/e₀............... Equation 1

Where ∅' = net flux through the surface, q = net charge, e₀ = electric permittivity of the space

From the question,

Given: q = 2.7 μC = 2.7×10⁻⁶ C,

Constant: e₀ = 8.85×10⁻¹² C²/N.m²

Substituting these values into equation 1

∅' = (2.7×10⁻⁶)/(8.85×10⁻¹²)

∅' = 3.05×10⁵ Nm²C⁻¹

Answer:

A(predicts an organisms ability to adapt to its enviroment, it is not a fact that each organization can adapt)

Explanation:

Answer:

Option C. 0.73 g/cm³

Explanation:

From the question given above, the following data were obtained:

Mass = 80 g

Area (A) = 10000 cm²

Thickness = 0.11 mm

Density =?

Next, we shall convert 0.11 mm to cm. This can be obtained as follow:

10 mm = 1 cm

Therefore,

0.11 mm = 0.11 mm × 1 cm / 10 mm

0.11 mm = 0.011 cm

Thus, 0.11 mm is equivalent to 0.011 cm.

Next, we shall determine the volume of the paper. This can be obtained as follow:

Area (A) = 10000 cm²

Thickness = 0.011 cm

Volume =?

Volume = Area × Thickness

Volume = 10000 × 0.011

Volume = 110 cm³

Finally, we shall determine the density of the paper. This can be obtained as follow:

Mass = 80 g

Volume = 110 cm³

Density =?

Density = mass / volume

Density = 80 / 110

Density = 0.73 g/cm³

Therefore the density of the paper is 0.73 g/cm³

Answer:

5.04 m

Explanation:

You are told that the homeowner wants to increase their fences by 34 percent meaning Original+ 34 percent. If the original is 100 percent, then the new fence size will be 134 % of the original. You are given the original which is 3.76 meters, to find new fence size 1.34 * 3.76m to get 5.0384 meters, rounded to 5.04 m.

Answer:

5.0384m

Explanation:

% increase = 100 x (Final - Initial / | initial | )

( |~~| Bars indicate absolute value since you can't have a negative height)

Answer:

the rock speed is increased

A rock is initially at rest concerning the earth, but the speed of the rock will increase when it hits the ground.

The resistance to something rolling or moving over another solid object is called friction. Even though frictional forces can be helpful, like the traction needed to walk without slipping, they also present a considerable amount of resistance to motion. About 20% of the engine power in a car is used to combat frictional forces in the moving parts.

The primary cause of friction between metals appears to be the forces of attraction, also known as adhesion, between the contact zones of the surfaces, which are always microscopically unequal. Because of friction caused by the imperfections of the tougher surface rubbing up against the softer surface, these "welded" connections are sheared.

To know more about Friction :

https://brainly.com/question/13000653

#SPJ2

Answer:

3

Explanation:

You must first make sure the equation is balanced. This one is. Then, you simply add up the coefficients of each compound on the products side of the equation. When the coefficient is not specified, you can assume it is 1 mole. So, in this equation, there is 1 mole of CaCl₂, 1 mole of CO₂, and 1 mole of H₂O = 3 moles.

The reactant side of the equation also has three moles:

1 mole of CaCO₃ and 2 moles of HCl.

Answer:

Jupiter

Explanation:

Answer:

The answer is Jupiter.

Explanation:

Jupiter is an orange/yellow colored planet.

Answer:

Option (A) is correct.

Explanation:

A horizontal rope has a length of 5 m and a mass of 0.00145 kg. If a pulse occurs on this string, generating a wavelength of 0.6 m and a frequency of 120 Hz. The tension to which the string is subjected is

mass of string, m = 0.00145 kg

Frequency, f = 120 Hz

wavelength = 0.6 m

Speed = frequency x wavelength

speed = 120 x 0.6 = 72 m/s

Let the tension is T.

Use the formula

[tex]v =\sqrt\frac{T L}{m}\\\\72 = \sqrt\frac{T\times 5}{0.00145}\\\\T = 1.5 N[/tex]

Option (A) is correct.

Answer:

[tex]I_2=30.9A[/tex]

Explanation:

From the question we are told that:

Wire segment [tex]l_s=2.9m[/tex]

Initial Current [tex]I_1=1400A[/tex]

Force [tex]F=2.00N[/tex]

Distance of Wire [tex]d=4.50cm=>0.0450m[/tex]

Generally the equation for Force is mathematically given by

 [tex]F=\frac{\mu_0 * I_1*I_2*l_s}{2 \pi *r}[/tex]

 [tex]F=\frac{4 \pi*10^{-7} *1400 I*I_2*2.9}{2 \pi *0.0450}[/tex]

 [tex]I_2=\frac{22.5*10^-2}{2*10^{-7}*1400*2.6}[/tex]

 [tex]I_2=30.9A[/tex]

Answer:

True. A permanent magnet like the earth produces its own B field due to movement of the iron core. The earths magnetic field is the reason why we have an atmosphere and it also is the only defense against solar flares. A coil of wire or solenoid that has current have so much moving charge that the motion of the electrical charge can create a significant G b-field

Answer:

Upthrust on boat becomes lesser than Weight of boat

Explanation:

When there are more people than the capacity, The weight of the boat acting downwards increases. However, the upthrust acting on the submerged part of the boat is constant. Since Weight > Upthrust, there is a net force downwards, leading to sinking.

Answer:

Explanation:

Distillation is the separation of multiple LIQUID components based on their different BOILING POINT. As the mixture is heated and the first component SEPARATES, its PURE form travels through the distillation set-up and GOES into a different container

Answer:

Block A velocity is 23.33 m/s and the collission is not elastic.

Explanation:

a) m1v1 + m2v2 = m1v1' + m2v2'

Plug in givens

90+60=3v1'+80

solve for v1'= 23.33m/s

b) Find the initial and final kinetic energy of Block B

Ki= 1/2(4)(15)^2 + 1/2(3)(30)^2 = 1800 J

Kf= 1/2(4)(20)^2 + 1/2(3)*(23.33)^2= 1616.433J

Since Ki does not equal Kf the collision is not elastic

Power output = volts x amps

Power output = 170 volts x 0.1 amps

Power output = 18 watts

Answer:

The length of his shadow is decreasing at a rate of 1.13 m/s

Explanation:

The ray of light hitting the ground forms a right angled triangle of height H, which is the height of the building and width, D which is the distance of the tip of the shadow from the building.

Also, the height of the man, h which is parallel to H forms a right-angled triangle of width, L which is the length of the shadow.

By similar triangles,

H/D = h/L

L = hD/H

Also, when the man is 4 m from the building, the length of his shadow is L = D - 4

So, D - 4 = hD/H

H(D - 4) = hD

H = hD/(D - 4)

Since h = 2 m and D = 12 m,

H = 2 m × 12 m/(12 m - 4 m)

H = 24 m²/8 m

H = 3 m

Since L = hD/H

and h and H are constant, differentiating L with respect to time, we have

dL/dt = d(hD/H)/dt

dL/dt = h(dD/dt)/H

Now dD/dt = velocity(speed) of man = -1.7 m/s ( negative since he is moving towards the building in the negative x - direction)

Since h = 2 m and H = 3 m,

dL/dt = h(dD/dt)/H

dL/dt = 2 m(-1.7 m/s)/3 m

dL/dt = -3.4/3 m/s

dL/dt = -1.13 m/s

So, the length of his shadow is decreasing at a rate of 1.13 m/s

Hi there!

[tex]\large\boxed{\approx 35.29 C}[/tex]

Use the following formula:

E = F / C, where:

E = electric field (N/C)

F = force (N)

C = Charge (C)

Thus:

6.8 × 10⁻⁵ = 2.4 × 10⁻³ / C

Isolate for C:

C = 2.4 × 10⁻³  / 6.8 × 10⁻⁵

Solve:

≈ 35.29 C

[tex]\implies {\blue {\boxed {\boxed {\purple {\sf { \frac{1}{I} = \frac{R}{E} + \frac{r}{E} }}}}}}[/tex]

[tex]\large\mathfrak{{\pmb{\underline{\orange{Step-by-step\:explanation}}{\orange{:}}}}}[/tex]

[tex]I = \frac{ E}{ R + r} \\[/tex]

[tex] ➺\:\frac{I}{1} = \frac{E}{R + r} \\[/tex]

Since [tex]\frac{a}{b} = \frac{c}{d} [/tex] can be written as [tex]ad = bc[/tex], we have

[tex]➺ \: I \: (R + r) = E \times 1[/tex]

[tex]➺ \: \frac{1}{I} = \frac{R + r}{E} \\ [/tex]

[tex]➺ \: \frac{1}{I} = \frac{R}{E} + \frac{r}{E} \\ [/tex]

[tex]\boxed{ Hence\:proved. }[/tex]

[tex]\red{\large\qquad \qquad \underline{ \pmb{{ \mathbb{ \maltese \: \: Mystique35ヅ}}}}}[/tex]

Answer:

The simplified expression is  3.833 x 10⁷ g

Explanation:

Given expression;

3.88 x 10⁷ g  -  4.701 x 10⁵ g

The expression above is simplified as follows;

= (3.88 x 100 x 10⁵ )g  -  ( 4.701 x 10⁵) g

= (388 x 10⁵ )g -  ( 4.701 x 10⁵) g

= (388  - 4.701 ) x (10⁵ )g

= 383.299 x 10⁵ g

In standard form, the simplified expression can be expressed as;

= (3.83299 x 100 x 10⁵) g

= 3.83299 x 10⁷ g

= 3.833 x 10⁷ g

Therefore, the simplified expression is  3.833 x 10⁷ g

Answer:

Answer is LC Cirenit (seres)

Answer: 66.67 m, 44.44 s

Explanation:

Given

Velocity of flow is [tex]u=1.5\ m/s[/tex]

Mary can row with speed [tex]v=3.6\ m/s[/tex]

Width of the river [tex]y=160\ m[/tex]

Flow will drift the Mary towards east, while Mary boat will cause it to travel in North direction

time taken to cross river

[tex]\Rightarrow t=\dfrac{160}{3.6}\\\\\Rightarrow t=\dfrac{400}{9}\ s[/tex]

Flow will drift Mary by

[tex]\Rightarrow x=ut\\\\\Rightarrow x=1.5\times \dfrac{400}{9}\\\\\Rightarrow x=66.67\ m[/tex]

Velocity w.r.t shore is

[tex]\Rightarrow v_{net}=\sqrt{3.6^2+1.5^2}\\\Rightarrow v_{net}=\sqrt{15.21}\\\Rightarrow v_{net}=3.9\ m/s[/tex]

Answer:

b)

Explanation:

GCMs (general circulation models) are useful instruments for gaining a quantitative knowledge of climate processes. Physical processes in the atmosphere, cryosphere, and land surface are represented by them. They are used for modeling the global climate system's reaction to rising greenhouse gas concentrations available at the moment by utilizing spectral models based on the energy emitted by the biosphere and clouds.

Answer:

Images formed by a convex mirror are always ​virtual

Explanation:

A virtual image is always created by a convex mirror, and it is always situated behind the mirror. The picture is vertical and situated at the focus point when the item is far away from the mirror. As the thing approaches the mirror, the image follows suit and increases until it reaches the same height as the object.

OAmalOHopeO

Answer:

Let's define t = 0s (the initial time) as the moment when Car A starts moving.

Let's find the movement equations of each car.

A:

We know that Car A accelerations with a constant acceleration of 5m/s^2

Then the acceleration equation is:

[tex]A_a(t) = 5m/s^2[/tex]

To get the velocity, we integrate over time:

[tex]V_a(t) = (5m/s^2)*t + V_0[/tex]

Where V₀ is the initial velocity of Car A, we know that it starts at rest, so V₀ = 0m/s, the velocity equation is then:

[tex]V_a(t) = (5m/s^2)*t[/tex]

To get the position equation we integrate again over time:

[tex]P_a(t) = 0.5*(5m/s^2)*t^2 + P_0[/tex]

Where P₀ is the initial position of the Car A, we can define P₀ = 0m, then the position equation is:

[tex]P_a(t) = 0.5*(5m/s^2)*t^2[/tex]

Now let's find the equations for car B.

We know that Car B does not accelerate, then it has a constant velocity given by:

[tex]V_b(t) =20m/s[/tex]

To get the position equation, we can integrate:

[tex]P_b(t) = (20m/s)*t + P_0[/tex]

This time P₀ is the initial position of Car B, we know that it starts 100m ahead from car A, then P₀ = 100m, the position equation is:

[tex]P_b(t) = (20m/s)*t + 100m[/tex]

Now we can answer this:

1) The two cars will meet when their position equations are equal, so we must have:

[tex]P_a(t) = P_b(t)[/tex]

We can solve this for t.

[tex]0.5*(5m/s^2)*t^2 = (20m/s)*t + 100m\\(2.5 m/s^2)*t^2 - (20m/s)*t - 100m = 0[/tex]

This is a quadratic equation, the solutions are given by the Bhaskara's formula:

[tex]t = \frac{-(-20m/s) \pm \sqrt{(-20m/s)^2 - 4*(2.5m/s^2)*(-100m)} }{2*2.5m/s^2} = \frac{20m/s \pm 37.42 m/s}{5m/s^2}[/tex]

We only care for the positive solution, which is:

[tex]t = \frac{20m/s + 37.42 m/s}{5m/s^2} = 11.48 s[/tex]

Car A reaches Car B after 11.48 seconds.

2) How far does car A travel before the two cars meet?

Here we only need to evaluate the position equation for Car A in t = 11.48s:

[tex]P_a(11.48s) = 0.5*(5m/s^2)*(11.48s)^2 = 329.48 m[/tex]

3) What is the velocity of car B when the two cars meet?

Car B is not accelerating, so its velocity does not change, then the velocity of Car B when the two cars meet is 20m/s

4)  What is the velocity of car A when the two cars meet?

Here we need to evaluate the velocity equation for Car A at t = 11.48s

[tex]V_a(t) = (5m/s^2)*11.48s = 57.4 m/s[/tex]

Answer:

B) 1500m/s

Explanation:

Ans is 1500m/s

Answer:The SI system is based on the number 10 as well as multiples and products of 10. This makes it much easier to use, and so it has been the accepted system in scientific and technical applications. The English system is more complicated as relationships between units of the same quantity aren't uniform.

Explanation:

Answer:

The metric system is an internationally agreed decimal system of measurement while The International System of Units (SI) is the official system of measurement in almost every country in the world

Answer:

mercury and alcohol

ii) used to test temperatures

i) It is a good conductor of heat and therefore the whole liquid reaches the temperature of the surroundings quickly.

ii) It does not wet (cling to the sides of) the tube.

Alcohol:

i) Alcohol has greater value of temperature coefficient of expansion than mercury.

ii) it's freezing point is below –100°C.