>
Which statement describes an electron?
EEEE
It has a positive charge and is located in the nucleus.
O It has a positive charge and is located in orbitals around the nucleus.
It has a negative charge and is located in the nucleus.
O It has a negative charge and is located in orbitals around the nucleus.

Answer:

1900grams of boiling water

Explanation:

0,c=19

100,c=19×100

1900grams

Answer:

0.53atm = P2

Explanation:

Gas at 1.00atm and 20°C. Temperature increased to 40°C...

We can solve this question using combined gas law:

P1*V1 / T1 = P2*V2 / T2

Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state.

Compunting the values of the problem:

P1 = 1.00atm

V1 = 250mL

T1 = 20°C + 273.15 = 293.15K

P2 = ?

V2 = 500mL

T2 = 40°C + 273.15 = 313.15K

1.00atm*250mL / 293.15K = P2*500mL / 313.15K

Answer:

1. Vacuole

2. chloroplast

3. Nucleus

4. Plasma membrane - cell membrane

5. Vacuole (same as #1 ?) could be vesicle

Explanation:

Each triglyceride is different from the others on the basis of presence of fatty acids in it.

Triglycerides is a kind of fat and derivative of ester which is formed by the combination of glycerol and three fatty acids.

So in the triglyceride molecule three sub divided parts are present due to the presence of three fatty acids groups and these fatty acids will make difference in each triglyceride molecules.

Hence of fatty acids in triglyceride molecule makes it different from other.

To know more about triglyceride, visit the below link:

https://brainly.com/question/1147557

Answer:

It has different fatty acids.

Explanation:

This is a signature of triglycerides

Answer:

The number of moles of H₃PO₄ that reacted is 0.000343 moles

Note: Some data is missing. Data from the attachment is used for the calculationsinnthe explanation below.

Explanation:

The reaction is a neutralization reaction between NaOH and H₃PO₄. The equation of the reaction is given as follows:

3 NaOH + H₃PO₄ ---> Na₃PO₄ + 3 H₂O

The molarity of the NaOH solution is 0.238 mol/L.

Average volume of NaOH used during the titration to arrive to endpoint = (4.6 + 3.9 + 4.5) mL / 3 = 4.33 mL

Molarity is defined ratio of the number of moles of solute to the volume of solution. Mathematically, molarity = number of moles/volume in Litres

Number of moles of NaOH reacted = 0.238 mol/L × (4.33mL × 1 L/1000 mL)

Number of moles of NaOH = 0.00103 moles

From the equation of the reaction, 3 moles of NaOH reacts with 1 mole of H₃PO₄

0.00103 moles of NaOH will react with 0.00103 x 1/3 moles of H₃PO₄ = 0.000343 moles of H₃PO₄.

Therefore, number of moles of H₃PO₄ that reacted is 0.000343 moles

Answer:

Determining the Slope on a p-t Graph. It was learned earlier in Lesson 3 that the slope of the line on a position versus time graph is equal to the velocity of the object. ... If the object has a velocity of 0 m/s, then the slope of the line will be 0 m/s. The slope of the line on a position versus time graph tells it all.

Explanation:

#carryonlearning

Answer:

25.08 grams of O₂ are needed to react with 8.15 g of C₂H₂.

Explanation:

The balanced reaction is:

2 C₂H₂ + 5 O₂ → 4 CO₂ + 2 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of each compound is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 52 grams of C₂H₂ react with 160 grams of O₂, 8.15 grams of C₂H₂ react with how much mass of O₂?

[tex]mass of O_{2} =\frac{8.15 grams of C_{2} H_{2}*160 grams of O_{2} }{52 grams of C_{2} H_{2}}[/tex]

mass of O₂= 25.08 grams

25.08 grams of O₂ are needed to react with 8.15 g of C₂H₂.

Answer:

less than 5 centimeters because it is a nonvascular plant

Explanation:

Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).

According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.

Answer:

d

Explanation:

Answer:

Explanation:

The structural formula of 2-methyl-3-hexene is drawn in the attached image below. After then, the three possible structures were drawn and the mechanism reaction.

From the mechanism shown, methanol deprotonates methoxide proton and neutralizes the positive charge to form methoxide. This is followed by the movement of electrons that takes place from the region of higher electron density to lower electron density.

Answer:

The rate of change of T with respect to time is 0.40 K/min

Explanation:

The gas law equation is:

[tex] PV = nRT [/tex]

We can find the rate of change of T with respect to time by solving the above equation for T and derivating with respect to time:

[tex] \frac{dT}{dt} = \frac{d}{dt}(\frac{PV}{nR}) [/tex]

[tex] \frac{dT}{dt} = \frac{1}{nR}(V\frac{dP}{dt} + P\frac{dV}{dt}) [/tex]

Where:

n: is the number of moles = 10 mol

R: is the gas constant = 0.0821

V: is the volume = 13 L

P: is the pressure = 8.0 atm

dP/dt: is the variation of the pressure with respect to time = 0.13 atm/min

dV/dt: is the variation of the volume with respect to time = -0.17 L/min

Hence, the rate of change of T is:

[tex] \frac{dT}{dt} = \frac{1}{10*0.0821}(13*0.13 - 8.0*0.17) = 0.40 K/min [/tex]    

Therefore, the rate of change of T with respect to time is 0.40 K/min

I hope it helps you!    

Answer: 178mph

Explanation:

From the question given, we are informed that the speed limit on parts of the German autobahn was once set at 286 kilometers per hour (km/h). Based on the information, the speed limit in miles per hour will then be:

= 286km/h × 1000m/1km × 1mi/1609m

= 178miles per hour

Therefore, the speed limit is 178mph.

Answer:

Indicate how the concentration of each species in the chemical equation will change to reestablish equilibrium after reactant or product is added.

[tex]2CO(g) + O2(g) <=> 2CO2[/tex]

Explanation:

When the reactants concentration increases, then the equilibrium will shift towards products and when the concentration of products increases, then equilibrium will shift towards reactants.

So, increases in concentration of carbon monoxide (CO) shifts the equilibrium to favor the formation of carbondioxide.

Similarly increase in concentration of oxygen also favor the formation of product carbon dioxide.

Increase in concentration of CO2 favors the formation of CO and O2.

Decrease in product concentration also favors the formation of product.

Decrease in reactant concentration favors the formation of reactants only.

Answer:

iron

Explanation:

Explanation:

is responsible for interrupting the interaction between pectins and solvent molecules

Answer:

True

Explanation:

A hypothesis can be proven true through experimentation. For example, if you hypothesize that a balloon with helium will float in the air, and then you test this and the balloon floats, you have just proven that your original hypothesis is true.

Answer:

See explanation and image attached

Explanation:

The reaction is an E2 reaction. It is a synchronous reaction.

The base KOC(CH3)3 abstracts a proton as the bromide ion leaves in a single step.

This yields the product as shown in the image attached.

Answer:

The mass of bromine liquid that participates in  a chemical reaction=12.8 g

Explanation:

We are given that

Total number of moles of bromine liquid participate in chemical reaction=0.0800 moles

We have to find the mass of bromine liquid that participates.

Atomic mass of Br=79.9 g

1  mole of bromine liquid=2 atomic mass of bromine (Br)

1 mole of bromine liquid ([tex]Br_2[/tex]) =[tex]2\times 79.9=159.8 g[/tex]

0.0800 moles of  bromine liquid=[tex]159.8\times 0.0800[/tex] g

0.0800 moles of  bromine liquid=12.784 g

0.0800 moles of  bromine liquid[tex]\approx 12.8[/tex] g

Hence, the mass of bromine liquid that participates in  a chemical reaction=12.8 g

Answer:

By how many times would you expect Al2(SO4)3 to depress the F.P of water compared to sucrose C12H22011 ?.

Explanation:

The freezing point of a pure solvent decreases further by adding a nonvolatile solute.

This is called depression in freezing point.

When an ionic solute is dissolved then the depression in the freezing point is proportional to the number of ions present in the solution.

In aluminum sulfate, there are five ions formed as shown below:

[tex]Al_2(SO_4)_3(aq)->2Al^3^+(aq)+3SO_4^2^-(aq)[/tex]

But sucrose is a covalent compound and it does not undergo dissociation.

Hence, aluminum sulfate decreases the freezing point of water by five times compared to sucrose.

Explanation:

Answer:

[tex]Q\approx6.4~kJ[/tex]

Explanation:

Quantity of heat required by 10 gram of ice initially warm it from -5°C to 0°C:

[tex]Q_1=m.C_s.\Delta T[/tex]

here;

mass, m = 10 g

specific heat capacity of ice, [tex]C_s=2.09~J.g^{-1}.^{\circ}C^{-1}[/tex]

change in temperature, [tex]\Delta T=(5-0)=5^{o}C[/tex]

[tex]Q_1=10\times2.09\times 5[/tex]

[tex]Q_1=104.5~J[/tex]

Amount of heat required to melt the ice at 0°C:

[tex]Q_2=m.\Delta H_{fus}[/tex]

where, [tex]\Delta H_{fus}=6020~J/mol[/tex]

we know that no. of moles is = (wt. in gram) [tex]\div[/tex] (molecular mass)

[tex]Q_2=\frac{10}{18} \times 6020[/tex]

[tex]Q_2=3344.44~J[/tex]

Now, the heat required to bring the water to 70°C from 0°C:

[tex]Q_3=m.C_L.\Delta T[/tex]

specific heat of water, [tex]C_L=4.18~J/g/^oC[/tex]

change in temperature, [tex]\Delta T=(70-0)=70^oC[/tex]

[tex]Q_3=10\times 4.18\times 70[/tex]

[tex]Q_3=2926~J[/tex]

Therefore the total heat required to warm 10.0 grams of ice at -5.0°C to a temperature of 70.0°C:

[tex]Q=Q_1+Q_2+Q_3[/tex]

[tex]Q=104.5+3344.44+2926[/tex]

[tex]Q=6374.94~J[/tex]

[tex]Q\approx6.4~kJ[/tex]

Answer:

zero

Explanation:

I I think one should be so accurate with measurements and experiments

Answer:

0.203 is the mean of the concentration of the HCl solution

Explanation:

You have 5 concentrations. The most appropiate result is the mean of those results. The mean is a statistical defined as the sum of each result divided by the total amount of results. For the results of the problem, the mean is:

0.210 + 0.204 + 0.201 + 0.202 + 0.197 = 1.014 / 5 =

Answer:

Theory

Explanation:

We are given the statement;

"A helium filled balloon floats."

Now, this statement is an attempt to explain to us why balloons float. And the reason is because they are filled with helium. This is no prediction or law or observation because to find out if the balloons contain helium, there must have been experiments to confirm that.

Thus, the statement in the question is a theory.

In a flame test electrons are excited to higher energy levels and their emissions are observed. Therefore, option A is correct.

The flame test is used to visually identify the identity of an unknown metal or metalloid ion based on the properties color the salt turns in the flame of a bunsen burner.

The color of light emitted depends on the energy emitted by an electron returning to its original state.

The flame's heat converts metal ions into atoms, which become excited and emit visible light. In a flame test electrons are excited to higher energy levels and their emissions are observed.

Thus, option A is correct.

To learn more about the flame test, follow the link;

https://brainly.com/question/6357832

#SPJ1

Answer:

There are a variety of methods by which a sample's boiling point can be determined, including distillation, reflux, and by using a Thiele tube. The most straightforward method uses a Thiele tube, and has the advantage of using less than 0.5mL of material.

Distillation Method

There are simpler methods than a distillation to measure a compound's boiling point, and it is recommended to explore other options (e.g. Thiele tube) if this is the only goal. However, if materials are limited, or if a purification is planned anyhow, a distillation can be used to determine a compound's boiling point. The distillation technique is discussed in great detail in Chapter 5.

A simple distillation should suffice for most situations and at least 5mL of sample should be used in the distilling flask along with a few boiling stones or stir bar. As the bulk of the material distills, the highest temperature noted on the thermometer corresponds to the boiling point. A major source of error with this method is recording too low a temperature, before hot vapors fully immerse the thermometer bulb. 5 Be sure to monitor the thermometer periodically, especially when the distillation is active. Record the barometric pressure along with the boiling point.

Reflux Method

A reflux setup can also be used to determine a compound's boiling point. Reflux is when a liquid is actively boiling and condensing, with the condensed liquid returning to the original flask. It is analogous to a distillation setup, with the main difference being the vertical placement of the condenser.

Thiele Tube Method

There are a variety of methods by which a sample's boiling point can be determined, including distillation, reflux and by using a Thiele tube. The most straightforward method uses a Thilele tube, and has the advantage of using less than 0.5ml of material.

Answer:

55.44L of the 0.17M NaOH are required

Explanation:

Phosphoric acid, H3PO4, reacts with NaOH as follows:

H3PO4 + 3NaOH → Na3PO4 + 3H2O

Where 1 mole of H3PO4 reacts with 3 moles of NaOH

To solve this question we need to find the moles of H3PO4 in the aliquot. Using the balanced equation we can find the moles of NaOH and its volume with the concentration (0.17M) as follows:

Moles H3PO4:

15.4mL = 0.0154L * (0.204mol/L) = 0.00314 moles H3PO4

Moles NaOH:

0.00314 moles H3PO4 * (3mol NaOH / 1mol H3PO4) = 0.009425moles NaOH

Volume NaOH:

0.009425moles NaOH * (1L/0.17moles NaOH) = 0.05544L 0.17M NaOH =

Answer:

Explanation:

This is a halogenation reaction i.e substitution or replacement of a single or more than a single hydrogen atom in the organic alkane compound with the halogen(here it is chlorine).

The chlorination of 1-chloro-2,2,3,3-tetramethylpentane under UV light resulted in the formation of five (5) dichloro derivatives which are shown in the image attached below.

Also, the compounds containing a stereocenter (i.e a location within the compound composing of various substituents in which the interchangeability of these substituents has the tendency of resulting into a stereoisomer) are indicated with an asterisk in the image below.

From the image below:

compound 1 ⇒  1,1-dichloro-2,2,3,3-tetramethylpentane = 2° C

∴

The given relative reactivity rate for 2°  = 3.6x

For compound 2 ⇒  1,4-dichloro-2,2,3,3-tetramethylpentane = 2°  = 3.6x

For compound 3 ⇒ 1,5-dichloro-2,2,3,3-tetramethylpentane = 1°  = 1x

For compound 4 ⇒ 1-chloro-2-chloromethyl-2,3,3-trimethylpentane

= 1°  = 1x

For compound 5 ⇒ 1-chloro-3-chloromethyl-2,2,3-trimethylpentane

= 1°  = 1x

As such, we have:

2(3.6x) + 3(1x) = 100

7.2x + 3x = 100

10.2x = 100

x = 100/10.2

x = 9.803°

∴

For compound (1) = 3.6(9.803) = 35.3%

For compound (2) = 3.6(9.803) = 35.3%

For compound (3) = 1(9.803) = 9.803°%

For compound (4) = 1(9.803) = 9.803°%

For compound (5) = 1(9.803) = 9.803°%

Answer:

The answer is

-control rods

Answer:

B. Control Rods.... via A P E X

Answer:

When this equation is solved, the two values of the unknown are 0.0643 and -0.082

Explanation:

Given

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex] --- the actual equation

Required

The values of x

We have:

[tex]1.77 * 10^{-2} = \frac{x^2}{0.298 - x}[/tex]

Cross Multiply

[tex]1.77 * 10^{-2} * (0.298 - x)= x^2[/tex]

Multiply both sides by 100

[tex]1.77 * (0.298 - x)= 100x^2[/tex]

Open bracket

[tex]0.52746 - 1.77x= 100x^2[/tex]

Rewrite as:

[tex]100x^2 + 1.77x - 0.52746 =0[/tex]

Using quadratic formula:

[tex]x = \frac{-b \± \sqrt{b^2 - 4ac}}{2a}[/tex]

Where:

[tex]a = 100; b = 1.77; c = -0.52746[/tex]

So, we have:

[tex]x = \frac{-1.77 \± \sqrt{1.77^2 - 4*100*- 0.52746 }}{2*100}[/tex]

[tex]x = \frac{-1.77 \± \sqrt{214.1169}}{2*100}[/tex]

[tex]x = \frac{-1.77 \± 14.63}{200}[/tex]

Split

[tex]x = \frac{-1.77 + 14.63}{200}\ or\ x = \frac{-1.77 - 14.63}{200}[/tex]

[tex]x = \frac{12.86}{200}\ or\ x = \frac{-16.40}{200}[/tex]

[tex]x = 0.0643\ or\ x = -0.082[/tex]