Answer:
Mendel, Inheritance/Heredity
Explanation:
Gregor Mendel (1822-1884) was an Austrian monk and scientist as stated in this question. He is referred to as the FATHER OF GENETICS due to his immense contributions to the principle of inheritance.
Gregor Mendel via his several works conducted on pea plants was able to demonstrate how traits passed down from parents to offsprings in a process called INHERITANCE OR HEREDITY.
Your Answer is : 1st Mendel and 2nd heredity.
Explanation:
a) The bubbles must be negatively charged.
b) The bubbles must be positively charged.
c) The bubbles must have the opposite charge to the charge on the student.
d) The bubbles must have the same charge as the charge on the student.
Answer:
C
Explanation:
like charges repel each others so if they have the same charge they will move away from each other
Consider the balanced chemical equation . How many moles of H 2O are produced when 1.0 mole of C 2H 6 reacts with excess O 2
Answer:
3.0 mol H₂O
Explanation:
Step 1: Write the balanced combustion equation
C₂H₆ + 3.5 O₂ ⇒ 2 CO₂ + 3 H₂O
Step 2: Establish the appropriate molar ratio
The molar ratio of C₂H₆ to H₂O is 1:3.
Step 3: Calculate the moles of H₂O formed from 1.0 mole of C₂H₆
1.0 mol C₂H₆ × 3 mol H₂O/1 mol C₂H₆ = 3.0 mol H₂O
How many liters of hydrogen can be produced at a pressure of 2 atm and a temperature of 298 K?
Answer: A volume of 1.16 L hydrogen is produced at a pressure of 2 atm and a temperature of 298 K.
Explanation:
Given: Mass of Mg = 2.3 g
Pressure = 2 atm
Temperature = 298 K
The reaction equation is as follows.
[tex]Mg + 2HCl \rightarrow MgCl_{2} + H_{2}[/tex]
This shows that 1 mole of Mg gives 1 mole of [tex]H_{2}[/tex].
Hence, moles of Mg for the given mass is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{2.3 g}{24.30 g/mol}\\= 0.095 mol[/tex]
Hence, 0.095 moles of Mg will give 0.095 moles of [tex]H_{2}[/tex].
Formula used to calculate volume is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into the above formula as follows.
[tex]PV = nRT\\2 atm \times V = 0.095 mol \times 0.0821 L atm/mol K \times 298 K\\V = \frac{0.095 mol \times 0.0821 L atm/mol K \times 298 K}{2 atm}\\= 1.16 L[/tex]
Thus, we can conclude that a volume of 1.16 L hydrogen is produced at a pressure of 2 atm and a temperature of 298 K.
The maximum number of electrons that can be present in an SHELL is
a) [tex]2 {n}^{2} [/tex]
b) [tex]2 {n}^{2} + 1[/tex]
c) 2n
d) none of these.
[tex]\huge\boxed{\fcolorbox{red}{blue}{ QUESTION }}[/tex]
The maximum number of electrons that can be present in an shell is
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{OPTIONS}}}}}}} [/tex]
a) [tex]2 {n}^{2} [/tex]
b) [tex]2 {n}^{2} + 1[/tex]
c) 2n
d) none of these.
[tex] \huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}[/tex]
OPTION (a)
[tex]2 {n}^{2} [/tex]
[tex] \bold { \red{ \star{ \blue{EXAMPLES}}}}[/tex]
In First shell only 2 electron can be placed .
[tex]2 {n}^{2} \\ n = 1 \: (bez \: \: no \: \: shell \: = 1) \\ so \\ 2 { n}^{2} = 2 \times {1}^{2} = 2 \: electrons[/tex]
In second shell 8 electrons can be placed
[tex]2 {n}^{2} \\ n = 1(bez \: \: no\: \: shell \: = 2) \\ 2 {n}^{2} = 2 \times {2}^{2} = 2 \times 4 = 8 \: electrons[/tex]
Wood is made mostly of cellulose and has a chemical formula of C.H.00. Which of the following equations
represents the cellulose combustion reaction?
Answer:
Option B.
C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O
Explanation:
To know which option is correct, we shall write the balanced equation for the combustion of cellulose. This is illustrated below:
C₆H₁₀O₅ + O₂ —> CO₂ + H₂O
There are 6 atoms of C on the left side and 1 atom on the right side. It can be balance by writing 6 before CO₂ as shown below:
C₆H₁₀O₅ + O₂ —> 6CO₂ + H₂O
There are 10 atoms of H on the left side and 2 atoms on the right side. It can be balance by writing 5 before H₂O as shown below:
C₆H₁₀O₅ + O₂ —> 6CO₂ + 5H₂O
There are a total of 7 atoms of O on the left side and a total of 17 atoms on the right side. It can be balance by writing 6 before O₂ as shown below:
C₆H₁₀O₅ + 6O₂ —> 6CO₂ + 5H₂O
Now, the equation is balanced.
Thus, option B gives the correct answer to the question.
How many moles of sodium carbonate in 18.06x10 to the power 22
Answer:
[tex] moles = \frac{ number \: of \: particles}{6.02 \times {10}^{23} } [/tex]
=1.806×10^22/6.02×10^23
=0.03 moles
hope this helps :)
Select the structure that corresponds
to the name:
decanoic acid
COOH
A.
B. CH3(CH2)7COOH
C. both
Answer:
b
Explanation:
Molecular formula of Decanoic Acid is C₁₀H₂₀O₂ therefore Option A is the right answer.
What is Decanoic Acid ?Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .
In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .
In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.
Hence option A is the right answer.
To know more about Decanoic Acid;
https://brainly.com/question/8729762
#SPJ2
determine the number of oxygen in 1.60 moles of sodium hydrogen phosphate
Answer:
6.40 is the answer to your question
The number of moles of oxygen in 1.60 moles of sodium hydrogen phosphate is 6.4 moles
Let's represent the chemical formula of the compound. The chemical formula of sodium hydrogen phosphate is as follows:
Chemical formula
The chemical formula of a compound is a symbolic expression use to signify the number of atoms present in a molecular substance. Therefore,
sodium hydrogen phosphate = Na₃PO₄
Therefore,
1 mole of Na₃PO₄ = 4 moles of oxygen
1.60 moles of Na₃PO₄ = ? moles of oxygen
cross multiply
number of moles of oxygen = 1.60 × 4
number of moles of oxygen = 6.4 moles
learn more on moles here: https://brainly.com/question/18395277
A gas is put into a cosed container.
The container and the gas inside it are heated.
What will happen to the pressure inside the container?
Answer:
When gases in containers are heated, their molecules increase in average speed. This means that they exert a greater force when they collide with the container walls, and also collide with the walls more frequently. The gas is therefore under greater pressure when its temperature is higher.
Cuál es el cruce para un niño donde su padre tiene el pelo rizo RR y su madre pelo lacio rr
Answer:
Rr
Explanation:
How many oxygen (O) atoms would a carbon (C) atom need to bond with to form a stable compound?
A.3
B.4
C.1
D.2
 Help ASAP only right answers only no spam don’t answer if you don’t know
Answer:
NO. 10.
performed experiments
NO. 11.
Inference
Explanation:
No 10.
in order to prove that Mary Mellon was in fact infected by typhoid proper experiments needs to be carried out.
No. 11
inference means an assumption due to the situation.
some one help please
Answer: oxnzle
Explanation:
When naming acids such as HCl, HBr, and HI, the prefix "hydro-" is added and the "ine" of the element is replaced with which of the following suffixes before the word "acid" is added?
Select one:
a. "-ic"
b. "-ate"
c. "-ite"
d. "-ide"
Answer:
a. "-ic"
Explanation:
The correct answer is a. "-ic".
For example:
For HCl, the name is Hydrochloric acid. As you can see, the suffix "-ine" of the element (originally chlorine) is changed to "-ic".Following the same logic, the name for HBr is Hydrobromic acid; and the name for HI is Hydroiodic acid.
write a short note on detection of nitrogen in the organic compound
ajdhrhahdjdjdndoxhdebdixhxb dbds ebenej
Write a Lewis structure that obeys the octet rule for each molecule or ion. Include resonance structures if necessary and assign formal charges to each atom.
Answer:
A structure that obeys the octet rule for each molecule or ion is [tex]XeO_4[/tex]
Explanation:
Here in [tex]XeO_4[/tex] , Xenon has 8 valence electrons and each oxygen atom has 6 valence electrons
Lewis structure for [tex]XeO_4[/tex] is shown below :
Here , all atoms are having their complete octet .
All the atoms in this Lewis structure is having their complete octet .
Resonance structure is not required as all atoms are same that is oxygen .
(Please Help)
1.What is the most common isotope for element X
2.Calculate the average atomic mass or element X
Answer:
1. Isotope 2 occurs most commonly
2. 39.02amu
Explanation:
1. Isotope 2 has a relative abundance of 78.68% i.e. 78.68 out of 100, hence, it is the isotope that occurs most commonly.
2. Isotope 1 = 9.67%, mass no: 38
Isotope 2 = 78.68%, mass no: 39
Isotope 3 = 11.34%, mass no: 40
Isotope 4 = 0.31%, mass no: 41
To find the average atomic mass of element X, we multiply each isotopes' relative abundance by its mass no and find the sum as follows:
We convert each percentage to decimal abundance:
Isotope 1 = 9.67% = 0.0967
Isotope 2 = 78.68% = 0.7868
Isotope 3 = 11.34% = 0.1134
Isotope 4 = 0.31% = 0.0031
(0.0967 × 38) + (0.7868 × 39) + (0.1134 × 40) + (0.0031 × 41)
3.6746 + 30.6852 + 4.536 + 0.1271
Average atomic mass = 39.02amu
Oxygen is a diatomic element.why give reason.
Answer:
Diatomic molecules contain two atoms that are chemically bonded. If the two atoms are identical, as in, for example, the oxygen molecule (O2), they compose a homonuclear diatomic molecule, while if the atoms are different, as in the carbon monoxide molecule (CO), they make up…
Explanation:
yei hoo arko aaxaina ...
True or false
The atomic number of an element is always more than the mass number of that elemenT
which organ is used to detect the product of neutralisation reaction
Answer:
Neutralization reactions occur when two reactants, an acid and a base, combine to form the products salt and water.
The organ that is used to detect the product of a neutralization reaction is the sense of taste.
When a neutralization reaction occurs between an acid and a base, it results in the formation of a salt and water. The salt produced in the reaction may have a distinct taste, depending on its chemical properties. For example, when hydrochloric acid reacts with sodium hydroxide, the products are sodium chloride and water. Sodium chloride, commonly known as table salt, has a characteristic salty taste.
Similarly, other salts formed from neutralization reactions may have different tastes. For instance, magnesium hydroxide reacting with acetic acid produces magnesium acetate, which has a slightly sweet taste. By using our taste buds, particularly on the tongue, we can detect and identify the taste of the salt formed during a neutralization reaction.
Learn more about Neutralization Reaction here:
https://brainly.com/question/23008798
#SPJ2
The carbonyl carbon in a ketone is attacked primarily by the peroxy oxygen bonded to hydrogen as opposed to the peroxy oxygen bonded to carbon because:
Answer:
This is because peroxy oxygen bonded to hydrogen can easily undergo nucleophilic protonation with the carbonyl carbon to form an alcohol
Explanation:
A ketone is a functional group that contains a carbonyl group (carbon-oxygen double bond ( R1R2-C=O).
The carbonyl carbon doubly bonded to the oxygen is electron deficient as a result of difference in electronegativity between carbon and oxygen, hence is susceptible to nucleophilic attacks
R1R2 - C = O
where R1 and R2 are organic substituents.
The peroxy oxygen that is bonded to hydrogen (H -O-O-R) is the electron-rich centre and easily attacks electron-deficient centres like the carbonyl carbon in ketones to form an alcohol.
The bond between the hydrogen attached to the peroxy oxygen is broken and the resultant hydrogen ion undergoes protonation with the oxygen of the carbonyl group to form an alcohol
R1R2 - C = O + H - O-O - R =>
R1R2- CH - OH + R - O-O-R1
Calculate the average atomic mass for element X.
(Please HELP)
One way of purifying gaseous H2 is to pass it under high pressure through the holes of a metal's crystal structure. Palladium, which adopts a cubic closest packed structure, absorbs more H2 than any other element and is one of the metals currently used for this purpose. Although the metal-hydrogen interaction is unclear, it is estimated that the density of absorbed H2 approaches that of liquid hydrogen (70.8 g/L). What volume (in L) of gaseous H2, measured at STP, can be packed into the spaces of 1 dm3 of palladium metal
Answer:
[tex]V=795.26L[/tex]
Explanation:
From the question we are told that:
Volume [tex]V=1dm^3=>1L[/tex]
Density [tex]\rho=70.8g/L[/tex]
Generally the equation for Density is mathematically given by
[tex]\rho =\frac{Mass}{Volume}[/tex]
Therefore
[tex]M=\rho*V[/tex]
[tex]M=70.8*1[/tex]
[tex]M=70.8g[/tex]
Since at STP
[tex]T=273K[/tex]
[tex]P=1atm[/tex]
[tex]Mass =70.8g[/tex]
Therefore
[tex]Moles\ of\ Hydrogen=\frac{Mass}{2g}[/tex]
[tex]Moles\ of\ Hydrogen=\frac{70.8}{2g}[/tex]
[tex]Moles\ of\ Hydrogen=35.4moles[/tex]
Generally the equation for Ideal gas is mathematically given by
[tex]PV=nRT[/tex]
Therefore
[tex]V=\frac{nRT}{P}[/tex]
[tex]V=\frac{35.4*0.0826*273}{1}[/tex]
[tex]V=795.3L[/tex]
please provide is matter about us pure all NCERT questions and answers
Answer:
I hope that's what u were lookong for :))
Explanation:
Determine the excluded volume per mole and the volume actually occupied by a mole for a gas consisting of molecules with radius 167 pm. [Note: To obtain the volume in liters, we must express the radius in decimeters (dm).] Enter your answers in scientific notation.
Answer:
Explanation:
Volume of one mole of a gas = 22.4 litre.
No of molecules in one mole of gas = 6.02 x 10²³ .
Volume of one molecule = 4/3 π R³
= 4/3 x 3.14 x ( 167 x 10⁻¹² m )³
= 19.5 x 10⁶ x 10⁻³⁶ m³
=19.5 x 10⁻³⁰ m³
= 19.5 x 10⁻³⁰ x 10³ litre .
= 19.5 x 10⁻²⁷ litre .
So volume occupied by molecules in one mole of gas
= 19.5 x 10⁻²⁷ x 6.02 x 10²³ litre
117.4 x 10⁻⁴ litre
= .01174 litre.
Excluded volume
= ( 22.4 - .01174 ) litre .
= 22.388 litre.
Hematite is a naturally occurring mineral and a common form of iron ore. The following statements describe physical and chemical changes occurring to hematite. Which statement describes a chemical change?
When the hematite particles rearrange to form a new substance", this statement describes chemical change.
What is chemical change ?A chemical change is a change of materials into another, new materials with different properties and one or more than one new substances are formed.
As a chemical changes is usually a change where a substance undergoes a chemical change and forms a new substance; which cannot be easily reversed into reactants by any simple physical methods.
In this example the hematite ore forms a new substance by an irreversible chemical change.
Hence, "The hematite particles rearrange to form a new substance", this statement describes chemical change.
Learn more about chemcial change here ;
https://brainly.com/question/23693316
#SPJ1
The electrolysis of water forms H2 and O2. 2H2O Right arrow. 2H2 O2 What is the percent yield of O2 if 10.2 g of O2 is produced from the decomposition of 17.0 g of H2O
Answer:
67.5%
Explanation:
Step 1: Write the balanced equation for the electrolysis of water
2 H₂O ⇒ 2 H₂ + O₂
Step 2: Calculate the theoretical yield of O₂ from 17.0 g of H₂O
According to the balanced equation, the mass ratio of H₂O to O₂ is 36.04:32.00.
17.0 g H₂O × 32.00 g O₂/36.04 g H₂O = 15.1 g O₂
Step 3: Calculate the percent yield of O₂
Given the experimental yield of O₂ is 10.2 g, we can calculate its percent yield using the following expression.
%yield = (exp yield / theoret yield) × 100%
%yield = (10.2 g / 15.1 g) × 100% = 67.5%
I am having trouble converting :(
Answer:
For the first question, to determine the total number of molecules of nitrogen dioxide, first make use of the molar mass of the nonpolar compound and then use that to find the total number of moles and then subsequently after make use of the ratio for the Avogadro's number to determine the total number of molecules of this compound.
For the final question, do the inverse, where we make use of the molecules of the compound and then use Avogadro's number to determine the moles of the compound and then use the same molar mass of the compound to determine the grams of the Nitrogen Dioxide.
En un estudio de contaminantes, se cuantificó que el martes anterior se tenían 40 ppm de dióxido de carbono en el ambiente estudiado. Mientras que el jueves se reportó que se tenía 0.004% de esa misma sustancia. ¿Cómo se comparan estos valores?
A.
Las concentraciones no pueden compararse debido a que tienen diferentes unidades.
B.
Las concentraciones son iguales, por lo que se deben monitorear las causas en los dos días.
C.
El jueves hay mayor concentración de contaminante, por lo que se deben tomar medidas únicamente para ese día.
D.
El martes hay mayor concentración de contaminante, por lo que se deben tomar medidas únicamente para ese día.
How many bonds can a carbon atom form?
O A. 1
B. 2
C. 4
O D. 3
