Answer:
I think CH2
Explanation:
I am not so sure
C H
×
2 1
Which one of the following is NOT the unit of wave number:
m-1
cm-1
mm-1
cm
Answer:
e
Explanation:
cm is not the unit of wave number out of the following.
What is a wave number?Definition: Total number of wave cycles present in a unit distance is termed a wave number.
Wave number is always a reciprocal of the unit of distance.Wave number is denoted by the letter 'k'.The formula for wave number is 2π/λ where λ is the wavelength. Since wave number is always reciprocal, cm is not the unit for a wave number. The higher the wave number, the higher the frequency and energy.To learn more about wave number, refer to:
https://brainly.com/question/8304265
#SPJ2
Walter buys a bus pass for $30. Every time he rides the bus,
money is deducted from the value of the pass. He rode
12 times and $24 was deducted from the value of the pass.
How much does each bus ride cost?
Answer:
2
Explanation:
$24/12 (times) = $2.00
How do you Convert 312 kelvin too 100 Fahrenheit?
How many moles are in 2.5 g of N2?
0.089
Explanation:
2.5/ 14= .178 then 0.178/ 2 again and you get 0.089
Answer:
Molar mass of nitrogen gas = (14 × 2) = 28 g
But molar mass is 1 mole
[tex]28 \: g \: are \: 1 \: mole \: of \: nitrogen \\ 2.5 \: g \: are \: \{ \frac{2.5 \times 1}{28} \} \: moles \\ \\ = { \boxed{ \boxed{0.089 \: moles}}}[/tex]
3
Using the average experimental value for the density of your unknown metal, calculate the
agine a large sample of the same metal weighed 950 pounds. Calculate as volume in cubic meters using
dimensional analysis fie, use conversion factors and show unit cancellation. Start with 950 lbs...)
Unit conversion using dimensional analysis is performed by multiplying the given unit with the conversion factor
The volume of a 2 ft.³ in cubic meters is approximately 0.056634 m³
The given mass of the sample of metal, m = 950 pounds
The units of density using the imperial units = [tex]lb_m[/tex]/ft.³
The units of the volume of the metal sample based on the above density = Cubic feet
The desired units = Cubic meters
The conversion factor for converting a unit in cubic feet to a unit in cubic meters is presented as follows
1 ft.³ = 0.0283 m³
Therefore, using dimensional analysis, the volume quantity in cubic feet is multiplied by 0.0283 m³/(1 ft.³) to convert the volume to cubic meters
Example;
Given that the volume of the metal sample 2 ft.³, we have that the volume in cubic meters is therefore;
2 ft.³ × (0.0283 m³)/(1 ft.³) ≈ 0.056634 m³
The volume of a sample of metal that is 2 ft.³ in cubic meters is ≈ 0.056634 m³
Learn more about dimensional analysis here:
https://brainly.com/question/22015862
https://brainly.com/question/17224555
The steps in every scientific investigation must_______________________.
A. follow exactly the same sequence.
B. begin with a hypothesis
C. include the development of a theory.
D. be performed in a logical sequence.
Answer:
B. begin with a hypothesis
Explanation:
heterogeneous mixture homogeneous
How are they similar?
Answer:
By definition, a pure substance or a homogeneous mixture consists of a single phase. A heterogeneous mixture consists of two or more phases. When oil and water are combined, they do not mix evenly, but instead form two separate layers. Each of the layers is called a phase.
Explanation:
How many moles of oxygen atoms are there in 1 mole of Mg(NO3)2?
Answer:6 moles
Explanation: u said atoms so O₁ = 1 mole so there is a total of 6 atoms of oxygen so 6 moles is the ans.
What are the variables used in an experiment? How are they different?
Answer:
There are many items that could be altered to test the reaction of another. These changing quantities are called variables. A variable is any factor, trait, or condition that can exist in differing amounts or types. An experiment usually has three kinds of variables: independent, dependent, and controlled.
Explanation:
What units do you use to measure mass?
inches
feet
milliliter
gram or kilogram
Answer:
gram or kilogram
Explanation:
these are the only ways for mass of the options
Answer:
unit of the mass is kilogram that the answer
What is the most stable element in the universe (in terms of binding energy)?
A. uranium
B. gold
C. iron
D. hydrogen
E. helium
F. lead
G. water
Answer:
C).Iron
Explanation:
Iron has a binding energy of 8.8MeV
Many familiar substances have common, unsystematic names. For each of the following, give the correct systematic name:
(a) saltpeter, KNO3;
(b) soda ash, Na2CO3;
(c) lime, CaO;
(d) muriatic acid, HCl;
(e) Epsom salts, MgSO4;
(f) milk of magnesia, Mg(OH)2
explain the importance of the periodic table
Answer:
the importance of the periodic table are,
To summarize, the periodic table is important because it is organized to provide a great deal of information about elements and how they relate to one another in one easy-to-use reference. The table can be used to predict the properties of elements, even those that have not yet been discovered.
Explanation:
hope its help for you
thank you
have nice day
What is the rate law?
Answer: B
Explanation:
The rate law is the mathematical equation that describes how reactant concentration changes as a function of time. A law such as "Rate = k*[A]*[B]" means that, for each liter-equivalent of the reactant(s) A, there are k liters of reactant B. The law also dictates the molarity (and thus partial pressure) for each component in solution.
plz do this i need help ill give u brailiest
1. C
2. B
3. B
4. sorry, but we cant see the pictures. thats all I can do.
-Chad
Answer:
(1) Turgor, an internalstimulus, refers to energy in a plant cell.
(2) Osmosis moves materials in and out of the plant cell from areas of low to high concentration?
(3) When a plant is hypertonic,what is happening in the plantcell, and what will the plantlook like?
→ A. The vacuole is not full and the plant is wilted.
(4) What picture at the bottom of the page represents equilibrium orbalance in a cell?
→ Sorry the picture is not given
why do you have to pay for everthing it should be free for new user for like a week
Sterling silver is 92.5% silver and 7.5% copper. Its density is 10.25 g/cm3. A sterling silver pendant is added to a graduated cylinder filled with 50.0 mL of water. The volume rises to 61.3 mL. What is the mass of copper contained in this pendant?
From the information given:
The volume of the graduated cylinder = 50.0 mLwhen a sterling silver pendant is added, the volume increases to = 61.3 mL∴
The volume of the sterling silver pendant is:
= 61.3 mL - 50.0 mL
= 11.3 mL
Since, 1 mL = 1cm³
Then;
11.3 mL = 11.3 cm³
the density of the sterling silver = 10.25 g/cm³Using the relation for Density; i.e.
[tex]\mathbf{Density = \dfrac{mass}{volume}}[/tex]
[tex]\mathbf{10.25 \ g/cm^3= \dfrac{mass}{11.3 \ cm^3}}[/tex]
mass = 10.25 g/cm³× 11.3 cm³
mass of the sterling silver = 115.825 grams
Recall that sterling silver has:
92.5% silver and;7.5% copper∴
The mass of the copper contained in the sterling silver pendant can be calculated as:
[tex]\mathbf{= \dfrac{115.825 \ g \times 7.5}{100}}[/tex]
= 8.687 grams
Therefore, we can conclude that the mass of the copper contained in the sterling silver pendant is 8.687 grams
Learn more about the relation between Density, Mass, and Volume here:
https://brainly.com/question/24386693?referrer=searchResults
A metal has a density of 11.3 g/cm^3. If a sample of this metal has a mass of 25.210 g, then its volume must be ?
Taking into account the definition of density, the volume of an object with a mass of 25.210 mL and a density of 11.3[tex]\frac{g}{cm^{3} }[/tex] is 2.23 cm³.
First of all, density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.
In other words, density is a quantity that relates the mass and volume of a substance. Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
[tex]density=\frac{mass}{volume}[/tex]
Density, according to the International System of Units, is usually expressed in kilogram per cubic meter ([tex]\frac{kg}{m^{3} }[/tex])or gram per cubic centimeter ([tex]\frac{g}{cm^{3} }[/tex]).
In this case, you know:
density= 11.3 [tex]\frac{g}{cm^{3} }[/tex]mass= 25.210 gvolume= ?Replacing in the definition of density:
[tex]11.3\frac{g}{cm^{3} }=\frac{25.210g}{volume}[/tex]
Solving:
volume× 11.3 [tex]\frac{g}{cm^{3} }[/tex]=25.210 g
[tex]volume=\frac{25.210g}{11.3\frac{g}{cm^{3} }}[/tex]
volume= 2.23 cm³
In summary, the volume of an object with a mass of 25.210 mL and a density of 11.3[tex]\frac{g}{cm^{3} }[/tex] is 2.23 cm³.
Learn more about density:
brainly.com/question/952755?referrer=searchResults brainly.com/question/1462554?referrer=searchResultsWhich of the following best describes the make up of Saturn's rings?(1 point) solid bands of sand and dust that formed from the start of the universe solid bands of sand and dust that formed from the start of the universe material from comets that have passed through Saturn's atmosphere material from comets that have passed through Saturn's atmosphere dust, rock, and ice particles that orbit due to Saturn's gravity dust, rock, and ice particles that orbit due to Saturn's gravity debris and rocks from other planets that orbit around Saturn
Answer:
Which of the following best describes the make up of Saturn's rings?(1 point) solid bands of sand and dust that formed from the start of the universe solid bands of sand and dust that formed from the start of the universe material from comets that have passed through Saturn's atmosphere material from comets that have passed through Saturn's atmosphere dust, rock, and ice particles that orbit due to Saturn's gravity dust, rock, and ice particles that orbit due to Saturn's gravity debris and rocks from other planets that orbit around Saturn
The make up of Saturn's ring are dust, rock, and ice particles that orbit due to Saturn's gravity"
Saturn is one of the 9 planets of the solar system. It is considered to be the second largest planet.
Saturn has seven large rings orbiting around it. These rings are believed to be pieces of comets, asteroids, or shattered moons that broke up before they reached the planet. And this shattered comets or asteroid are believed to be torn apart by Saturn's powerful gravity.
These comets or asteroids are made of billions of small chunks of ice and rocks which are covered or coated with other small materials such as dust particles.
Thus, the correct option that matches the above explanation is "dust, rock, and ice particles that orbit due to Saturn's gravity"
Learn more here: https://brainly.com/question/24569357
HELP! 100 points if you give a valid answer and brainliest if it's detailed!
Explanation:
The extract of plant is not done in fixed proportion
it is heterogeneous
When multiplying 602.4 m by 3.72 m, which value determines the number of significant figures in the answer? Explain.
The values that determines the number of significant figures in the answer is 3.72
In mathematics and science, a significant figure refers to any figure that contributes to the degree of accuracy of a value that is being measured.
The value having the value having the least number of significant figures in a multiplication determines the number of significant figures in the answer.
In this case, 3.72 has the least number of significant figures hence it determines the number of significant figures in the answer.
Learn more; https://brainly.com/question/13386983
Answer:
3.72
Explanation:
3.72 has the least number of significant figures which means the number of significant figures is the answer.
How can constraints be used to help define the problem?
Answer: Constraints are restrictions (limitations, boundaries) that need to be placed upon variables used in equations that model real-world situations. It is possible that certain solutions which make an equation true mathematically, may not make any sense in the context of a real-world word problem.
Explanation:
Constraints is a condition which helps in optimization that solution satisfies.
What are constraints?Constraints are logical conditions that solution to a problem of optimization must satisfy.In defining constraint, value of interest is computed using variables of decision.
There are 5 types of constraints:
1) NOT NULL constraints- They prevent null values to be entered.
2) unique constraints-ensures that each value is different from others and is not null.
3) Check constraints-It is a database rule specifying values in one or more columns.
4) foreign key constraints- It gives definition of required relationships between and within tables.
5) informative constraints-It is a constraint which is used by the SQL compiler for improving access to the data.
Learn more about constraints here:
https://brainly.com/question/15148586
#SPJ2
For most of a star's life it will use this element for it's fuel. just 1 answer
What is brady's reagent, and what is it's function?
Answer:
Brady's reagent or Borche's reagent, is prepared by dissolving 2,4-dinitrophenylhydrazine in a solution containing methanol and some concentrated sulfuric acid. This solution is used to detect ketones and aldehydes.
Answer:
It is 2,4-dinitrophenylhydrazine, it confirms presence of a carbonyl functional group [ hydrazine and ketone ]
Explanation:
[tex].[/tex]
i need help with unit conversion
Answer:
what is it?
Explanation:
you haven't said?
1. What was the evidence that a salt was produced? Explain how that evidence was achieved.
2. Where do you predict the water (H2O) that was produced has come from?
Will give brainliest :)
1.Salt is a mineral composed primarily of sodium chloride (NaCl), a chemical compound belonging to the larger class of salts; salt in the form of a natural crystalline mineral is known as rock salt or halite. Salt is present in vast quantities in seawater. The open ocean has about 35 grams (1.2 oz) of solids per liter of sea water, a salinity of 3.5%.
2.Water (chemical formula H2O) is an inorganic, transparent, tasteless, odorless, and nearly colorless chemical substance, which is the main constituent of Earth's hydrosphere and the fluids of all known living organisms (in which it acts as a solvent[1]). It is vital for all known forms of life, even though it provides no calories or organic nutrients. Its chemical formula H2O, indicates that each of its molecules contains one oxygen and two hydrogen atoms, connected by covalent bonds. The hydrogen atoms are attached to the oxygen atom at an angle of 104.45°.[2] "Water" is the name of the liquid state of H2O at standard conditions for temperature and pressure.
Explanation:
hope it is helpful for you have a nice daySomeone answer this tysm
Answer:
D: The energy of objects that are moving
Answer:
The energy of objects that are moving.
PLS MARK THE BRAINLIEST!!!
Example of movable and fixed pully.
Answer:
A good example of a fixed pulley is a flag pole: When you pull down on the rope, the direction of force is redirected by the pulley, and you raise the flag. ... Examples of movable pulleys include construction cranes, modern elevators, and some types of weight lifting machines at the gym.what happens when a burning splinter is introduced in gas jar containing carbon dioxide
Answer:
Explanation:
when a burning splinter is introduced into a jar of carbon dioxide the burning fire gets puts out due to the presence of carbon dioxide which is a colorless odorless gas that prevents the burning of fire
a wooden baseball bat is an example of
a: compound
b: element
c: heterogeneous
d: homogeneous
A wooden baseball bat is an example of a heterogeneous substance.
A heterogeneous substance is consists of compounds that are not thoroughly mixed together.
Woods are fibrous structural substances with spaces present in trees and other woody plants' stems as well as roots. They are composed of a natural composite of cellulose fibers and are contained with a lignin matrix that is capable of resisting compression.
They can use for fire, building, the manufacture of weapons and tools, furniture, as well as paperwork.
Wood is a heterogeneous, highly porous cellular material. It is made up of cells and the cell walls are made up of roughly 40% cellulose, 15% hemicellulose, and lignin of about (15–30%).
Therefore, we can conclude that a wooden baseball bat is an example of a heterogeneous substance.
Learn more about Heterogeneous substances here:
https://brainly.com/question/24172292?referrer=searchResults