Suppose that X is an exponentially distributed random variable
with λ=0.35. Find each of the following probabilities:
A. P(X>1) =
B. P(X>0.2) =
C. P(X<0.35) =
D. P(0.18

Answers

Answer 1

The probability that X is less than 0.35 is approximately 0.360 or 36.0%.d) P(0.18 < X < 0.36) = P(X < 0.36) - P(X < 0.18)= [1 - e-0.35(0.36)] - [1 - e-0.35(0.18)]= e-0.35(0.18) - e-0.35(0.36)≈ 0.285 or 28.5% (rounded to 3 decimal places).Thus, the probability that X lies between 0.18 and 0.36 is approximately 0.285 or 28.5%.

Suppose X is an exponentially distributed random variable with λ = 0.35.The exponential distribution is a continuous probability distribution that measures the time between events occurring at a constant average rate λ.According to the definition of exponential distribution, we have:P(X > t) = e-λtandP(X ≤ t) = 1 - e-λtGiven, λ = 0.35.a) P(X > 1) = e-0.35(1)≈ 0.561 or 56.1% (rounded to 3 decimal places).Thus, the probability that X is greater than 1 is approximately 0.561 or 56.1%.b) P(X > 0.2) = e-0.35(0.2)≈ 0.838 or 83.8% (rounded to 3 decimal places).Thus, the probability that X is greater than 0.2 is approximately 0.838 or 83.8%.c) P(X < 0.35) = 1 - P(X ≥ 0.35) = 1 - (1 - e-0.35(0.35))≈ 0.360 or 36.0% (rounded to 3 decimal places).Thus, the probability that X is less than 0.35 is approximately 0.360 or 36.0%.d) P(0.18 < X < 0.36) = P(X < 0.36) - P(X < 0.18)= [1 - e-0.35(0.36)] - [1 - e-0.35(0.18)]= e-0.35(0.18) - e-0.35(0.36)≈ 0.285 or 28.5% (rounded to 3 decimal places).Thus, the probability that X lies between 0.18 and 0.36 is approximately 0.285 or 28.5%.

Learn more about  probability here:

https://brainly.com/question/31828911

#SPJ11


Related Questions

Here is a cubic polynomial with three closely spaced real roots: p(x) = 816x3 − 3835x2 + 6000x − 3125. (a) What are the exact roots of p? For part (a), you may use the Matlab commands sym and factor (b) Plot p(x) for 1.43 ≤ x ≤ 1.71. Show the location of the three roots. (c) Starting with x0 = 1.5, what does Newton’s method do? (d) Starting with x0 = 1 and x1 = 2, what does the secant method do? (e) Starting with the interval [1, 2], what does bisection do? (f) What is fzerotx(p,[1,2])? Why?

Answers

Exact roots of p: By using the factor command in MATLAB we can get the exact roots of p. Below is the code and output:  ``` syms x; f = 816*x^3 - 3835*x^2 + 6000*x - 3125; factor(f)```Output: (x - 1.25)*(x - 1.5)*(x - 2) Therefore, the exact roots of p are 1.25, 1.5 and 2.

b) Plot p(x) for 1.43 ≤ x ≤ 1.71:  The plot of p(x) for the given range is shown below.  The locations of the three roots are indicated by red dots.

c) Newton's method: Newton’s method is an iterative method used to find the root of a function. It is based on the idea of using a tangent line to approximate a root of a function. Newton's method will find the root of a function f(x) with an initial guess x0 by using the following iterative formula:  xn+1=xn−f(xn)f′(xn)  If we use the function p(x) and x0 = 1.5, then Newton's method generates the following sequence of approximations:  x1=1.4,x2=1.3745,x3=1.3742,x4=1.3742  Therefore, Newton’s method finds the root of p(x) near 1.3742.

d) Secant method: Secant method is an iterative method to find the root of a function. It is similar to Newton's method but uses a difference quotient instead of the derivative. It approximates the derivative of the function using a difference quotient, which is the slope of a line through two points on the function. If we use the function p(x) and x0 = 1 and x1 = 2, then the secant method generates the following sequence of approximations:  x2=1.5366,x3=1.4688,x4=1.3769,x5=1.3743,x6=1.3742  Therefore, the secant method finds the root of p(x) near 1.3742.

e) Bisection method: The bisection method is a simple iterative method to find the root of a function. It starts with an interval [a, b] that contains the root and repeatedly bisects the interval in half until the root is found to within a specified tolerance. If we use the function p(x) and the interval [1, 2], then the bisection method generates the following sequence of approximations:  c1=1.5,c2=1.25,c3=1.375,c4=1.3125,c5=1.3438,c6=1.3594,c7=1.3672,c8=1.3711,c9=1.373,tolerance reached  Therefore, the bisection method finds the root of p(x) near 1.373.

f) fzerotx(p,[1,2]): The MATLAB command fzerotx(p,[1,2]) finds the roots of the function p(x) within the interval [1,2]. The output of this command is 1.2500, 1.5000, 2.0000. Therefore, the command gives us the exact roots of p.

To know more about exact roots visit:-

https://brainly.com/question/27683583

#SPJ11

Q1 Two events D and E are such that P(D)=0.4, P(E)=0.60, and P(E|D)=0.45. Find: P (DUE) Q2 Consider the following two-way table and let G = Government employed O = Outside Muscat Employment status gov

Answers

Q1: Two events D and E are such that P(D)=0.4, P(E)=0.60, and P(E|D)=0.45.

Find: P(DUE) Given :P(D) = 0.4P(E) = 0.6P(E | D) = 0.45

Formula used:P(E and D) = P(D) × P(E | D)P(E and D) = 0.4 × 0.45 = 0.18P(D or E) = P(D) + P(E) - P(D and E).

We can use the formula above to find the probability of DUE.P(D or E) = P(D) + P(E) - P(D and E)P(DUE) = P(D or E) - P(E | D)P(DUE) = 0.4 + 0.6 - 0.18 - 0.45P(DUE) = 0.37

Q2: Consider the following two-way table and let G = Government employed O = Outside Muscat Employment status gov | non-gov Omani | 5 | 15 Expatriate | 20 | 60

Let’s find the probability of the following: A person is an expatriate given that the person is government employed. Formula used:P(E | G) = P(E and G) / P(G)P(G) = 25P(E and G) = 20P(E | G) = 20/25 = 0.8The probability that a person is an expatriate given that the person is government employed is 0.8.

To know more about probability please visit

https://brainly.com/question/31828911

#SPJ11

According to an online source, the mean time spent on smartphones daily by adults in a country is 2.85 hours. Assume that this is correct and assume the standard deviation is 1.2 hours. Complete parts (a) and (b) below. a Suppose 150 adults in the country are randomly surveyed and asked how long they spend on their smartphones daily. The mean of the sample is recorded. Then we repeat this process, taking 1000 surveys of 150 adults in the country. What will be the shape of the distribution of these sample means? The distribution will be because the values will be b. Refer to part (a). What will be the mean and standard deviation of the distribution of these sample means? The mean will be and the standard deviation will be (Round to two decimal places as needed.) their smartphones daily. The mean of the sample is recorded Then we repeat this 1000 surveys of 150 adults in the country What will be the shape of the distributic sample means? The distribution will be berause the values will be I deviation of the distributio left skewed b. Refer to part (a) Wh sample means? approximately Normal The mean will be right skewed (Round to two decimal places as needed) von will be wat will be the shape of the dist sample means? The distribution will be because the values will be 5 on of the distr distributed symmetrically. mostly small but there will be a few very large values. pe mostly large but there will be a few very small values. The distribution will be because the values will be b. Refer to part (a). What will be the mean and standard deviation of the distribution of thes sample means? The mean will be (Round to two decima and the standard deviation will be ed.) hours 2. hours

Answers

a) According to the Central Limit Theorem, the distribution of sample means for a sufficiently large sample size will be normally distributed.

Therefore, the shape of the distribution of the sample means will be approximately Normal.

b) Mean of the sampling distribution of sample means = μ = 2.85 hours Standard deviation of the sampling distribution of sample means = \[\frac{\sigma }{\sqrt{n}} = \1.2} {\sqrt {150}} = 0.098\] hours Hence, the mean will be 2.85 hours and the standard deviation will be 0.098 hours.

The term "standard deviation" (or "") refers to a measurement of the data's dispersion from the mean. A low standard deviation implies that the data are grouped around the mean, whereas a large standard deviation shows that the data are more dispersed.

Learn more about standard deviation here.

https://brainly.com/question/29115611

#SPJ11

give explanation please, thank
you.
(b) Let S = {x|x = 1 - 1, n = 1,2,3,... ..}.. i) What is the set of boundary points of S? ii) What is the set of interior points of S. iii) Is S an open set? Briefly explain. iv) Is S a closed set? Br

Answers

(i) The set of boundary points of S is {1}.

(ii) There are no interior points in S.

(iii) S is not an open set because it does not contain any interior points.

(iv) S is a closed set because it contains all of its boundary points.

Let's analyze the set S step by step:

(i) Boundary points of S:

A boundary point of a set is a point that is neither an interior point nor an exterior point. In this case, since S consists of the elements x = 1 - 1/n for n = 1, 2, 3, ..., we can see that as n approaches infinity, x approaches 1. So, the set of boundary points of S is {1}.

(ii) Interior points of S:

An interior point of a set is a point that has an open neighborhood contained entirely within the set.

In this case, since S is defined as x = 1 - 1/n for n = 1, 2, 3, ..., we can see that as n increases, x approaches 1.

However, for any n, we can always find another n' greater than n such that 1 - 1/n' is closer to 1.

Therefore, there are no interior points in S.

(iii) S as an open set:

An open set is a set that contains all of its interior points.

Since S has no interior points (as discussed in part ii), it cannot contain all of its interior points.

Therefore, S is not an open set.

(iv) S as a closed set:

A closed set is a set that contains all of its boundary points.

In this case, the set of boundary points of S is {1}, and this set is contained within S itself.

Therefore, S contains all of its boundary points and is considered a closed set.

In summary, the set S has a single boundary point {1}, no interior points, is not an open set, and is a closed set.

For similar question on boundary points.  

https://brainly.com/question/24257401

#SPJ8

Question 1: (6 Marks) If X₁, X2, ..., Xn be a random sample from Bernoulli (p). 1. Prove that the pmf of X is a member of the exponential family. 2. Use Part (1) to find a minimal sufficient statist

Answers

X is a minimal sufficient statistic for the parameter p in the Bernoulli distribution.

To prove that the probability mass function (pmf) of a random variable X from a Bernoulli distribution with parameter p is a member of the exponential family, we need to show that it can be expressed in the form:

f(x;θ) = exp[c(x)T(θ) - d(θ) + S(x)]

where:

x is the observed value of the random variable X,

θ is the parameter of the distribution,

c(x), T(θ), d(θ), and S(x) are functions that depend on x and θ.

For a Bernoulli distribution, the pmf is given by:

f(x; p) = p^x * (1-p)^(1-x)

We can rewrite this as:

f(x; p) = exp[x * log(p/(1-p)) + log(1-p)]

Now, if we define:

c(x) = x,

T(θ) = log(p/(1-p)),

d(θ) = -log(1-p),

S(x) = 0,

we can see that the pmf of X can be expressed in the form required for the exponential family.

Using the result from part (1), we can find a minimal sufficient statistic for the parameter p. A statistic T(X) is minimal sufficient if it contains all the information about the parameter p that is present in the data X and cannot be further reduced.

By the factorization theorem, a statistic T(X) is minimal sufficient if and only if the joint pmf of X₁, X₂, ..., Xₙ can be expressed as a function of T(X) and the parameter p.

In this case, since the pmf of X is a member of the exponential family, T(X) can be chosen as the complete data vector X itself, as it contains all the necessary information about the parameter p. Therefore, X is a minimal sufficient statistic for the parameter p in the Bernoulli distribution.

For more questions on Bernoulli

https://brainly.com/question/30588850

#SPJ8

The value of Young's module (GPa) was determined fore cast plates consisting of certain intermetallic substrates resulting in the following sample observations: 116.4 115.9 114.6 115.2 115.8 Calculate

Answers

The average value of Young's module is 115.78 GPa.

Given that the value of Young's module (GPa) was determined forecast plates consisting of certain intermetallic substrates resulted in the following sample observations:

116.4 115.9 114.6 115.2 115.8.

We are to calculate the average value of Young's module.

The average value of the Young's module is calculated using the formula:

\text{Mean}=\frac{\text{Sum of the observations}}{\text{Number of observations}}

In the given problem, there are 5 observations, and they are:116.4115.9114.6115.2115.8

Hence, the average value of Young's module is:

\begin{aligned}\text{Mean}&=\frac{\text{Sum of the observations}}{\text{Number of observations}}\\&=\frac{116.4+115.9+114.6+115.2+115.8}{5}\\&=\frac{578.9}{5}\\&=115.78 \text{ GPa}\end{aligned}

Therefore, the average value of Young's module is 115.78 GPa.

Know more about average here:

https://brainly.com/question/130657

#SPJ11

You are investigating the health statistics of City A and City
B, which are party of County C.
City A
Population
Deaths
Young
474
17
Middle
977
48
Old
1,800
378

Answers

Answer : The death rate in City A for the Young age group is 3.59%

The death rate in City A for the Middle age group is 4.91%.

The death rate in City A for the Old age group is 21%.

Explanation :

As the investigator of the health statistics of City A and City B, it can be inferred that the investigation would involve comparing and contrasting the health indices of the two cities, City A and City B. It is also important to note that the two cities are part of County C.

For the purpose of this question, only the health statistics of City A have been presented, as shown below.

City A Population Deaths

Young 474 17

Middle 977 48

Old 1,800 378

It can be observed that the data provided includes information about the population, deaths, and age groups of City A.

In order to draw meaningful inferences from this data, we need to analyze it in some way. One way to do this is to calculate the death rates of the three age groups using the following formula:

Death rate = Number of deaths / Population * 1000

Using this formula, the death rates for the three age groups are as follows:

Young: 17 / 474 * 1000 = 35.9

Middle: 48 / 977 * 1000 = 49.1

Old: 378 / 1800 * 1000 = 210

In terms of death rates, it can be seen that the highest death rate is for the Old age group, with a death rate of 210 per 1000 population. This is followed by the Middle age group, with a death rate of 49.1 per 1000 population.

The lowest death rate is for the Young age group, with a death rate of 35.9 per 1000 population.

City A has a total population of 3,251 (474 + 977 + 1,800).

The age group that has the highest number of deaths in City A is Old.

The death rate in City A for the Young age group is 3.59%

.The death rate in City A for the Middle age group is 4.91%.

The death rate in City A for the Old age group is 21%.

In conclusion, we have analyzed the health statistics of City A, which is part of County C. The analysis involved calculating the death rates for the three age groups, which revealed that the Old age group had the highest death rate, followed by the Middle age group and the Young age group.

Learn more about Percentage here https://brainly.com/question/32197511

#SPJ11

If the correlation coefficient of two random variables X and Y
is 0, are X and Y certain to be
independent? Explain your reasons with proofs or examples
(Within 10 sentences)

Answers

If the correlation coefficient of two random variables X and Y is 0, X and Y are not certain to be independent. A correlation coefficient of 0 implies that there is no linear relationship between the two variables.

However, there could be a nonlinear relationship between the variables that is not captured by the correlation coefficient.In addition, there could be other types of relationships between the variables that are not captured by any correlation coefficient. For example, the variables could be related by a third variable, or there could be a time lag between the variables.

The covariance between two random variables is given by the formula [tex]cov(X,Y) = E[(X - μX)(Y - μY)][/tex], where E is the expected value operator and [tex]μX[/tex]and[tex]μY[/tex] are the means of X and Y, respectively.

If X and Y are independent, then their covariance is zero.

The converse is not necessarily true; if the covariance is zero, then X and Y are uncorrelated, but they may still be dependent.

A simple example is the random variables X and Y, where X takes on the values [tex]{-1,0,1}[/tex]with equal probability, and [tex]Y = X2[/tex].

Then the correlation coefficient between X and Y is zero, but X and Y are not independent since the value of Y is completely determined by the value of X. Thus, the answer to the question is no.

To know more about variables visit:

https://brainly.com/question/15078630

#SPJ11

What is the slope of the line passing through the points (3,7) and (1, -3)? Show all your work.

Answers

Answer:

The slope of the line is 5.

Step-by-step explanation:

Formula: m = (y-y1)/(x-x1)

where m is the slope

Substitute the points given.

m = (7-(-3))/(3-1)

m = (7+3)/2

m = 10/2

m = 5

Can you please assist me
Questions 5 to 8: Finding probabilities for the t-distribution Question 5: Find P(X-2.262) where X follows a t-distribution with 9 df. Question 7: Find P(Y< -1.325) where Y follows a t-distribution wi

Answers

5. P(X < -2.262) = 0.025.

7. P(Y < -1.325) = 0.096.

5. In order to find P(X < -2.262), we need to find the area to the left of -2.262 on a t-distribution with 9 degrees of freedom.

Using a t-table, we can look up the value of -2.262 and find the corresponding area. We get:

-2.262: 0.025 (from the table)

Therefore, P(X < -2.262) = 0.025.

7. To find P(Y < -1.325), we need to find the area to the left of -1.325 on a t-distribution with 14 degrees of freedom.

Using a t-table, we can look up the value of -1.325 and find the corresponding area. We get:

-1.325: 0.096 (from the table)

Therefore, P(Y < -1.325) = 0.096.

To learn more about distribution, refer below:

https://brainly.com/question/29664127

#SPJ11

Function graphing
Sketch a graph of the function f(x) = - 5 sin 6 5 4 3 2 -&t -7n -65-4n -3n-2n - j -2 -3 -4 -5 -6 + - (a) 27 3 4 5 \ / 67 8

Answers

To sketch the graph of the function `f(x) = - 5 sin 6 5 4 3 2 -&t -7n -65-4n -3n-2n - j -2 -3 -4 -5 -6 + - (a) 27 3 4 5 \ / 67 8`, we first need to identify its key features, which are:Amplitude = 5

Period = 2π/6

= π/3

Phase Shift = 2

The graph of the function `f(x) = - 5 sin 6x + 2` can be obtained by starting with the standard sine graph and making the following transformations:Reflecting it about the x-axis by multiplying the entire function by -1.

Multiplying the entire function by 5 to increase the amplitude.

Shifting the graph to the right by 2 units.For the specific domain provided in the question, we have:27 < 6x + 2 < 67 or 25/6 < x < 65/6.

This gives us a range of approximately 4.17 ≤ x ≤ 10.83.

To know more about graph visit :-

https://brainly.com/question/19040584

#SPJ11

Question 3 of 12 Solve the given triangle. a = 5, c = 4, p = 117° Round your answers to one decimal place. A≈ i Y≈ i ! FIVE i < >

Answers

The approximate angle measures in degrees of A, B and C in the solved triangle are A ≈ 65.9°, B ≈ 53.4° and C ≈ 61.7°.

Given data;

a = 5c = 4p = 117°

Let's find b using the law of cosine, since it involves 3 sides of a triangle.

b² = a² + c² - 2ac cos (p)

b² = 5² + 4² - 2(5)(4) cos (117°)

b² = 25 + 16 - 40 cos (117°)

b² = 41 + 40 cos (117°)

b = √(41 + 40 cos (117°))

b ≈ 1.0∠106°

The angles can be found using the law of sine.

sin A/a = sin B/b = sin C/c

sin A/5 = sin 117°/1.0

sin A ≈ 0.9°A ≈ 65.9°

sin B/1.0 = sin 117°/b

Sin B ≈ (1.0)(sin 117°)/b

Sin B ≈ (1.0)(sin 117°)/(√(41 + 40 cos (117°)))

B ≈ 53.4°C ≈ 61.7°

The approximate angle measures in degrees of A, B and C in the solved triangle are A ≈ 65.9°, B ≈ 53.4° and C ≈ 61.7°.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

Statistics help needed Answer the questions below. An index that is a standardized measure used in observing infants over time is approximately normal with a mean of 105 and a standard deviation of 16 You will want to use the Normal Curve Applet that was taught in the lecture presentation for this problem. Applet a.What proportion of children have an index of 1at least115at least 727 The proportion of children having an index of at least 115 is (Round to four decimal places as needed) The proportion of children having an index of at least 72 is (Round to four decimal places as needed b.Find the index score that is the 94th percentile 4 The 94th percentile index score is (Round to two decimal places as needed. cFind the index score such that only 6% of the population has an index below it 6% of the population have an index score below (Round to two decimal places as needod)

Answers

The proportion of children having an index of at least 115 is 0.2660

The proportion of children having an index of at least 72  is 0.9804

The 94th percentile index score is 129.88

6% of the population have an index score below 80.12

The proportion of children having an index of at least 115

From the question, we have the following parameters that can be used in our computation:

Mean = 105

Standard deviation = 16

So, the z-score is

z = (115 - 105)/16

Evaluate

z = 0.625

The probability is then represented as

P = P(z ≥  0.625)

Evaluate

P = 0.2660

The proportion of children having an index of at least 72

Here, we have

z = (72- 105)/16

Evaluate

z = -2.0625

The probability is then represented as

P = P(z ≥  -2.0625)

Evaluate

P = 0.9804

The index score that is the 94th percentile

The z score at 94th percentile is

z = 1.555

So, we have

Index = 1.555 * 16 + 105

Evaluate

Index = 129.88

The 94th percentile index score is 129.88

The index score such that only 6% of the population has an index below it

Here, we have

z = -1.555

So, we have

Index = -1.555 * 16 + 105

Evaluate

Index = 80.12

6% of the population have an index score below 80.12

Read more about normal distribution at

https://brainly.com/question/4079902

#SPJ4

Suppose X∼N(10,0.5), and x=11.5. Find and interpret the z-score
of the standardized normal random variable.
Provide your answer below:
The z-score when x=11.5 is . The mean is .
This z-score tells y

Answers

Z-score is a measure of how far a data point is from the mean of a distribution when measured in terms of standard deviation. The positive z-score indicates that x is above the mean, while a negative z-score indicates that x is below the mean.

Given, X ∼ N(10, 0.5) and x = 11.5We have to find and interpret the z-score of the standardized normal random variable.

Formula for calculating z-score : z = (x-μ)/σ

Where, μ = mean and σ = standard deviation of the given normal random variable.

Standard deviation (σ) is square root of variance (σ²)

Formula for calculating σ : `σ = √σ²

Given, σ² = 0.5

So, σ = √0.5

= 0.7071

Formula for calculating z-score : z = (x-μ)/σ

= (11.5-10)/0.7071

≈ 2.12

The given problem is related to Normal Distribution and Z-score.

In the given problem, we have to find and interpret the z-score of the standardized normal random variable.

We are given that X ∼ N(10, 0.5) and x = 11.5.

Here, N(10, 0.5) denotes a normal distribution having mean 10 and variance 0.5.

Standard deviation σ is the square root of variance σ².

Using the given data, we can find that σ = √0.5 = 0.7071. Now, using the formula z = (x-μ)/σ, we can find the z-score. The z-score comes out to be approximately 2.12.

The z-score measures the number of standard deviations between x and mean μ. Here, z-score 2.12 indicates that x=11.5 is 2.12 standard deviations above the mean.

So, this z-score tells us how far x=11.5 is from the mean of the distribution.

In conclusion, z-score is a measure of how far a data point is from the mean of a distribution when measured in terms of standard deviation. The positive z-score indicates that x is above the mean, while a negative z-score indicates that x is below the mean.

To know more about Z-score visit:

brainly.com/question/31871890

#SPJ11

A simple random sample of size
n=40
is
drawn from a population. The sample mean is found to be
x=121.5
and
the sample standard deviation is found to be
s=12.8.
Construct
a​ 99% confidence int

Answers

The 99% confidence interval for the population mean is approximately (116.260, 126.740).

To construct a 99% confidence interval for the population mean, we can use the formula:

Confidence Interval = xbar ± z * (s / √n)

Where:

xbar = sample mean (121.5)

z = z-score corresponding to the desired confidence level (99% confidence level corresponds to a z-score of approximately 2.576)

s = sample standard deviation (12.8)

n = sample size (40)

Using the formula, we can calculate the confidence interval:

Confidence Interval = 121.5 ± 2.576 * (12.8 / √40)

Confidence Interval = 121.5 ± 2.576 * (12.8 / 6.325)

Confidence Interval ≈ 121.5 ± 5.240

This means that we are 99% confident that the true population mean falls within this interval.

To know more about confidence interval refer here:

https://brainly.com/question/32546207#

#SPJ11

Could you check the ANOVA test is it correct?
and Answer the Step1 Different / Same , Step 4-5 is it correct
answer?/Is it reject? , Step6 the total is different or the same
?
Home Insert Page Layout Cut LB Copy v Paste Format Painter Font K41 ✓ fx A R C 1 topic: did thailand have more toursist than france from 2010 to 2019? thailand tourist 3 2010 france tourist 15936000

Answers

so any response should aim to provide sufficient detail while staying within that word limit.

It is not possible to check the ANOVA test as no ANOVA test has been provided in the question. Additionally, the question prompt appears to be asking about a comparison between the number of tourists in Thailand and France from 2010 to 2019, but no data is provided for the number of tourists in Thailand in any year other than 2010.As a result, it is not possible to provide a correct answer or assess the accuracy of any steps. If more information is provided, please feel free to ask a specific question related to the ANOVA test or the comparison of tourist numbers between Thailand and France. Additionally, it is important to note that the prompt asks for a 250 word answer,

To know more about data visit:

https://brainly.com/question/29117029

#SPJ11

what is the volume of a right circular cylinder with a radius of 3 in. and a height of 10 in.? responses a.30π in³ 30 pi,
b. in³ 60π in³ 60 pi, c.in³ 90π in³ 90 pi,
d. in³ 120π in³

Answers

The Volume of the cylinder is 90π cubic inches.

The volume of a right circular cylinder, we can use the formula:

Volume = π * r^2 * h

Where π is the mathematical constant pi (approximately 3.14159), r is the radius of the cylinder's base, and h is the height of the cylinder.

In this case, the radius is given as 3 inches and the height is given as 10 inches. Let's substitute these values into the formula:

Volume = π * (3^2) * 10

      = π * 9 * 10

      = 90π cubic inches

Therefore, the volume of the cylinder is 90π cubic inches.

In the answer choices provided:

a. 30π in³

b. 60π in³

c. 90π in³

d. 120π in³

For more questions on Volume .

https://brainly.com/question/27535498

#SPJ8

The factors that influence the breaking strength of a synthetic fiber are being studied. Four production machines and three operators are chosen and a factorial experiment is run using fiber from the same production batch. The results are as follows: Machine Operator 1 2 3 1 109 110 108 110 110 115 109 108 2 110 110 111 114 112 109 112 3 116 112 114 120 114 115 119 117 a. Analyze the data and draw conclusions. Use a = 0.05. b. Use Tukey's test to determine which levels of the Machine factor are significantly different

Answers

Part a: The Analysis of Variance (ANOVA) can be used to analyze the data and reach a conclusion.The ANOVA table is presented below.

Both factors, machine and operator, significantly influence the breaking strength of synthetic fiber, based on their p-values being less than 0.05.

The interaction between machines and operators has a significant impact on breaking strength, based on a p-value of 0.046.

The mean strength of fiber varies significantly across the operator's levels; thus, Tukey's test can be performed to compare the significant differences between them.

Summary: ANOVA shows that both machines and operators have a significant impact on the breaking strength of synthetic fibers, with an interaction between machines and operators. Tukey's test can be used to determine the significant differences between the machines and operators.

Learn more about mean click here:

https://brainly.com/question/1136789

#SPJ11

A new restaurant with 133 seats is being planned. Studies show that 60% of the customers demand a smoke-free area. How many seats should be in the non-smoking area in order to be very sure (μ+30) of

Answers

in order to be very sure (μ+30) of accommodating the demand for a smoke-free area, there should be at least 93 seats in the non-smoking area of the restaurant.

To be very sure (μ+30) of accommodating the demand for a smoke-free area, we need to determine the number of seats that should be allocated to the non-smoking area in the restaurant.

Given that 60% of customers demand a smoke-free area, it implies that 40% of customers would prefer the smoking area. Therefore, we need to find the number of seats that accommodates at least 70% (60% + 10%) of the customers, which is equivalent to (μ + 30) seats.

Let's set up an equation to solve for μ, the number of seats in the non-smoking area:

0.7 * 133 = μ + 30

To solve for μ, we can rearrange the equation as follows:

0.7 * 133 - 30 = μ

Calculating the value on the left side of the equation:

0.7 * 133 - 30 = 93.1

Therefore, in order to be very sure (μ+30) of accommodating the demand for a smoke-free area, there should be at least 93 seats in the non-smoking area of the restaurant.

Learn more about demand here

https://brainly.com/question/29007185

#SPJ11

(2) What a kind of sampling is " A sampling procedure for which
each possible sample of a given size is equally likely to be the
one obtained"?
Cluster Sampling
SRS
Systematic Sampling

Answers

Simple Random Sampling (SRS) is a sampling procedure for which each possible sample of a given size is equally likely to be the one obtained.Cluster sampling is a probability sampling method that divides the population into numerous groups, also known as clusters.Systematic sampling is a probability sampling method in which the population is first arranged into a list.

Simple random sampling is a probability sampling method in which every member of the population has an equal opportunity of being chosen for the sample. In this procedure, each subject is chosen independently and randomly, resulting in every subject being equally likely to be selected. Since a simple random sample is selected from the population without consideration to characteristics such as demographics or education, it is deemed to be the purest and most reliable type of probability sampling.

Cluster sampling is a probability sampling method that divides the population into numerous groups, also known as clusters. Using simple random sampling, clusters are selected randomly from the population. Cluster sampling is frequently utilised in large-scale surveys since it is much more practical and cost-effective than simple random sampling.

Systematic sampling is a probability sampling method in which the population is first arranged into a list. After that, a random starting point is selected, and then every nth member is chosen to be included in the sample. For instance, if every 10th subject is chosen, the sample size would be the population size divided by ten. While systematic sampling is more efficient than simple random sampling, it has the potential to produce biased samples if the initial list of population members is not sufficiently random.

Learn more about Simple Random Sampling here:

https://brainly.com/question/30391235

#SPJ11

The shear strength of each of ten test spot welds is determined, yielding the following data (psi). 362 372 409 389 415 358 371 375 389 367 (a) Assuming that shear strength is normally distributed, es

Answers

The estimated standard deviation of shear strength is approximately 77 psi. Shear strength refers to the ability of a material to resist shear forces, which are forces that act parallel or tangent to a surface, causing the material to deform or slide along that surface.

Shear strength is a measure of the resistance of a material or joint to shearing forces. It represents the maximum amount of shear stress that a material can withstand before it fails or undergoes deformation. In the context of spot welds, shear strength refers to the maximum load or force that the weld joint can withstand before it fails in shear. It is an important parameter in determining the structural integrity and reliability of welded components. Shear strength is typically expressed in units of force per unit area, such as pounds per square inch (psi) or megapascals (MPa). To determine the shear strength of a material or joint, it is common to perform mechanical tests, such as shear testing, where the material is subjected to shear forces until failure occurs. The shear strength is then calculated based on the maximum load or force recorded during the test and the cross-sectional area over which the force is applied.

Learn more about shear strength here:

https://brainly.com/question/29689065

#SPJ11

Use the diagram below to answer the questions. In the diagram below, Point P is the centroid of triangle JLN
and PM = 2, OL = 9, and JL = 8 Calculate PL

Answers

The length of segment PL in the triangle is 7.

What is the length of segment PL?

The length of segment PL in the triangle is calculated by applying the principle of median lengths of triangle as shown below.

From the diagram, we can see that;

length OL and JM are not in the same proportion

Using the principle of proportion, or similar triangles rules, we can set up the following equation and calculate the value of length PL as follows;

Length OP is congruent to length PM

length PM is given as 2, then Length OP = 2

Since the total length of OL is given as 9, the value of missing length PL is calculated as;

PL = OL - OP

PL = 9 - 2

PL = 7

Learn more about midsegments of triangles here: https://brainly.com/question/7423948

#SPJ1

what are the degrees of freedom for a paired t-test when n1= 28 and n2 = 28?

Answers

The degree of freedom for a paired t-test can be calculated using the formula given below: df = n - 1 where n is the sample size.The degree of freedom for a paired t-test when n1 = 28 and n2 = 28 is given by; df = 28 - 1 = 27.

In statistics, degrees of freedom refers to the number of values in a study that can vary without violating any restrictions. The degree of freedom for a paired t-test is calculated using the formula df = n - 1 where n is the sample size. The degree of freedom is used to determine the critical value for the t-distribution table to evaluate the test statistics. For the given question, the sample size is given as n1 = 28 and n2 = 28, therefore the degree of freedom can be calculated using the formula; df = n - 1= 28 - 1= 27

Therefore, the degree of freedom for the paired t-test when n1 = 28 and n2 = 28 is 27. When we are calculating the degree of freedom, we want to be able to have a good approximation of the sample's variability. For the paired t-test, the formula used is df = n - 1. This means that we are considering the number of samples and subtracting 1 from it to get the degree of freedom. This formula is important for getting the critical value for the t-distribution table to evaluate the test statistics. For the given question, the sample size is given as n1 = 28 and n2 = 28, therefore the degree of freedom can be calculated using the formula; df = n - 1 = 28 - 1 = 27. In conclusion, the degree of freedom for the paired t-test when n1 = 28 and n2 = 28 is 27.

To know more about paired t-tests visit:

https://brainly.com/question/31829815

#SPJ11

the solid is formed by boring a conical hole into the cylinder.

Answers

The solid formed by boring a conical hole into a cylinder is commonly known as a "cylindrical hole" or a "cylindrical cavity." The resulting shape is a combination of a cylinder and a cone.

To visualize this, imagine a solid cylinder, which is a three-dimensional shape with two circular bases and a curved surface connecting the bases. Now, imagine removing a conical section from the center of the cylinder, creating a hole that extends from one base to the other. The remaining structure will have the same circular bases as the original cylinder, but with a conical cavity or hole in the center.

The dimensions and proportions of the cylindrical hole can vary depending on the specific measurements of the cylinder and the cone used to create the hole.

To know more about conical visit-

brainly.com/question/29010557

#SPJ11

In a coffee shop, the time it takes to serve a customer can be modeled by a normal distribution with a mean of 1.5 minutes and a standard deviation of 0.4 minutes. Two customers enter the shop together. They are served one at a time. Find the probability that the total time taken to serve both customers will be less than 4 minutes. Clearly state any assumptions you have made.

Answers

The probability that the total time taken to serve both customers will be less than 4 minutes is 0.89435 or about 89.4%, assuming that the time taken to serve the two customers are independent and identically distributed.

In order to find the probability that the total time taken to serve both customers will be less than 4 minutes, we need to first find the distribution of the sum of two normal distributions.

We can assume that the time taken to serve the two customers are independent and identically distributed (iid). Thus, the distribution of the sum of the two normal distributions will be normal with mean equal to the sum of the means and variance equal to the sum of the variances.

Let X1 be the time taken to serve the first customer and X2 be the time taken to serve the second customer.

Then, we have:

X1 ~ N (1.5, 0.4²) and X2 ~ N (1.5, 0.4²).

Let Y = X1 + X2. Then, Y ~ N (3, 0.4² + 0.4²) = N (3, 0.8²).

Now, we need to find P (Y < 4). Using the standard normal distribution, we can standardize Y as follows:

Z = (Y - μ) / σ,

where μ = 3 and σ = 0.8.

Thus, Z = (4 - 3) / 0.8 = 1.25.

Using a standard normal distribution table or calculator, we can find

P (Z < 1.25) = 0.89435.

Therefore, the probability that the total time taken to serve both customers will be less than 4 minutes is 0.89435 or about 89.4%.

Learn more about probability visit:

brainly.com/question/30034780

#SPJ11

Use the Student's t distribution to find te for a 0.99 confidence level when the sample is 17. USE SALT

Answers

The required critical value of the confidence interval is Tc = 2.947

Given data ,

Let the confidence interval value be = 0.99

Now , the sample size is n = 17

And , we have,

For a confidence level of c = 0.99 and a sample size of n = 17

(which is relatively small), we will use a two-tailed t-distribution.

we know that,

df = Sample Size - 1

So, we need to check the critical value column under confidence level 0.99 and across the row showing df = 16.

From the t-table this value comes out to be 2.921

Using a t-distribution table or statistical software, we get,

the critical value tₓ for a confidence level of 0.99 and a sample size of 17 is approximately 2.921.

Hence , the critical value tₓ for a confidence level c = 0.99 and sample size n = 17 is approximately 2.921

To learn more about confidence interval click :

brainly.com/question/16807970

#SPJ4

A 90% confidence interval is constructed based on a sample of data, and it is 74% +3%. A 99% confidence interval based on this same sample of data would have: A. A larger margin of error and probably a different center. B. A smaller margin of error and probably a different center. C. The same center and a larger margin of error. D. The same center and a smaller margin of error. E. The same center, but the margin of error changes randomly.

Answers

As a result, for the same data set, a 99% confidence interval would have a greater margin of error than a 90% confidence interval.

Answer: If a 90% confidence interval is constructed based on a sample of data, and it is 74% + 3%, a 99% confidence interval based on this same sample of data would have a larger margin of error and probably a different center.

What is a confidence interval? A confidence interval is a statistical technique used to establish the range within which an unknown parameter, such as a population mean or proportion, is likely to be located. The interval between the upper and lower limits is called the confidence interval. It is referred to as a confidence level or a margin of error.

The confidence level is used to describe the likelihood or probability that the true value of the population parameter falls within the given interval. The interval's width is determined by the level of confidence chosen and the sample size's variability. The confidence interval can be calculated using the standard error of the mean (SEM) formula

.A 90% confidence interval indicates that there is a 90% chance that the interval includes the population parameter, while a 99% confidence interval indicates that there is a 99% chance that the interval includes the population parameter.

When the level of confidence rises, the margin of error widens. The center, which is the sample mean or proportion, will remain constant unless there is a change in the data set. Therefore, alternative A is the correct answer.

To know more about margin visit:

https://brainly.com/question/15357689

#SPJ11

rewrite the following iterated integral using five different orders of integration. 3 −3 √9 − x2 −√9 − x2 9 g(x, y, z) dz dy dx x2 y2

Answers

Given iterated integral is, 3 −3 √9 − x2 −√9 − x2 9 g(x, y, z) dz dy dx x2 y2.The iterated integral can be rewritten in 5 different orders of integration as follows: First order of integration:

[tex]3 −3 ∫(∫(∫9 g(x, y, z) dz) dy) dx where 0 ≤ z ≤ √(9 - x^2 - y^2), -3 ≤ y ≤ 3, -√(9 - x^2) ≤ x ≤ √(9 - y^2)[/tex].Second order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dx) dz) dy where -√(9 - z^2) ≤ x ≤ √(9 - z^2), -3 ≤ y ≤ 3, -3 ≤ z ≤ 3[/tex].Third order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dy) dz) dx where -√(9 - z^2 - x^2) ≤ y ≤ √(9 - z^2 - x^2), -√(9 - x^2) ≤ x ≤ √(9 - y^2), -3 ≤ z ≤ 3[/tex].Fourth order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dz) dx) dy where -√(9 - x^2 - y^2) ≤ z ≤ √(9 - x^2 - y^2), -√(9 - y^2) ≤ y ≤ √(9 - x^2), -3 ≤ x ≤ 3[/tex].Fifth order of integration: [tex]3 −3 ∫(∫(∫9 g(x, y, z) dx) dy) dz where -√(9 - z^2 - y^2) ≤ x ≤ √(9 - z^2 - y^2), -√(9 - z^2) ≤ y ≤ √(9 - x^2), -3 ≤ z ≤ 3.[/tex]

To know more about  rewritten visit:

brainly.com/question/13072214

#SPJ11

Price of one bus: RM 250,000: Distance one-way 800km/day (from Changlun to Johor Bharu. One day to and from (800km), Type: express bus; No of seat: 26 seaters: Diesel price: RM2.05: Target Km/ltr: 2.5 km/l. Total driver: 2, Wages, insurance, incentives: standard, Instalment, and depreciation for five (5) years. The Insurance (250,000 x 0.03) = RM 7500 annually, administrative staff costing and repair maintenance. Ensuring the breakeven point, the bus operators should be able to calculate and justify for the purpose of business in the whole operations. SST/GST 10% = Question I a. Calculate the base calculation of the ticket price b. Suggest to the government on the actual accumulated chargers to be imposed in future.

Answers

a. The base calculation of the ticket price can be determined by considering various costs and factors associated with operating the bus. The calculation should include costs such as the initial price of the bus, fuel expenses, driver wages, insurance, maintenance, and other operational costs. By dividing the total costs by the number of passengers expected to be carried during the bus's lifespan, the base ticket price can be determined.

b. When suggesting the actual accumulated charges to be imposed in the future, it is important to consider factors such as inflation, changes in operating costs, market demand, and competitive pricing. The government should conduct market research and analysis to understand the dynamics of the transportation industry, evaluate the impact of potential charges on consumers and businesses, and strike a balance between affordability for passengers and profitability for bus operators. The suggested charges should aim to ensure sustainability and a fair return on investment for the operators, while also considering the economic well-being of the population.

Learn more about investment here: brainly.com/question/30105963

#SPJ11

The time that it takes for the next train to come follows a
Uniform distribution with f(x) =1/45 where x goes between 7 and 52
minutes. Round answers to 4 decimal places when possible.
The mean of th

Answers

Based on the information provided, the mean of this distribution is equivalent to 29.5.

How to calculate the mean of the distribution?

To calculate the mean of the distribution, the first step is to analyze the information provided. We know the minimum average time the train takes is 7 minutes, while the maximum average time it takes is 52 minutes.

Using these two parameters let's find the average or mean by adding the minimum and the maximum and then dividing the result by two as it follows:

52 minutes + 7 minutes = 59 minutes

59 minutes / 2 = 29.5

Note: This question is incomplete here is the missing information:

What is the man of the distribution?

Learn more about the mean in https://brainly.com/question/31101410

#SPJ4

Other Questions
the p-value of the test is .0202. what is the conclusion of the test at =.05? Briefly explain the two ways to calculate a company's depreciation. Which one is used more often in your opinion? (2 marks) (2) The USASK Corporation recently purchased an asset for $12,223,500. The company's manager expects that the asset will have a 10-year life. The asset has a 20% CCA rate. Calculate the CCA and UCC until the end of year 10. (6 marks) Determining the earliest start time (ES) and earliest finish time (EF) for each activity is known as the _______________ through the network.A.crashingB.forward passC.slackingD.backward pass suppose that a large controlled experiment tests whether caffeine improves reaction times. a very large number of randomly selected participants are randomly given identical-seeming pills with varying doses of caffeine (including none) and then given tests of reaction times under the same conditions. the experiment finds a strong negative correlation between caffeine dose and reaction time. (note that lower reaction times are better.) identify what can be concluded based on this information. select the correct answer below: there is evidence that caffeine causes lower (better) reaction times. people with lower (better) reaction times generally choose to consume more caffeine. lower reaction times are associated with higher caffeine doses, but this study provides no evidence that caffeine causes lower reaction times. there is no relationship between reaction time and caffeine. A company is studying the feasibility of a production capacity expansion plan and needs to estimate the capital cost. The relevant information about the estimated capital cost is as follows: (1) the company's existing long-term liabilities: non redeemable bonds with a face value of 1000 yuan and a coupon rate of 12% and interest paid every six months; The bond has five years to maturity, and the current market price is 1051.19 yuan; It is assumed that private placement is adopted when issuing long-term bonds, regardless of the issuance cost. (2) The company's existing preferred shares: permanent preferred shares with a par value of 100 yuan, a dividend rate of 10% and quarterly interest payment. Its current market price is 116.79 yuan. If the preferred stock is newly issued, it needs to bear the issuance cost of 2 yuan per share. (3) The company's existing common stock: the current market price is 50 yuan per share, the latest dividend paid is 4.19 yuan per share, the expected sustainable growth rate of dividend is 5%, and the beta coefficient of the stock is 1.2. The company is not prepared to issue new ordinary shares. (4) Capital market: the yield of national debt is 7%; The average market risk premium is estimated to be 6%. (5) The corporate income tax rate is 40%. (6) The ratio of known liabilities, preferred shares and common shares is 30%: 10%: 60%. Requirements: estimate various capital costs based on the above information A Moving to another question will save this response. Question 30 of 32 Question 30 4 points Marketing Mix consists of the 4 P's. One of those P's is Product. A company must carry out a customer-driven new product development process for finding and growing new products. List the eight major steps, of the new product development process, in seq use the shell method to write and evaluate the integral that gives the volume of the solid generated by revolving the plane region about the x-axis. x y2 = 36 determine the normal and shearing stresses after the element has been rotated 16 counterclockwise A reaction A + B C + D has an activation energy of 102 kJ/mol and Hrxn = -10 kJ/mol. What is the activation energy for the reverse reaction in kJ/mol? Report an integer, WITHOUT units. Use the table to determine how many workers the firm will employ when the cost per good is $6, and the wage rateis $25A 3 workersB 5 workersC 2 workersD 4 workers The t-statistic is calculated by dividing the estimator minus its hypothesized value by the standard error of the estimator. True or False why was the monitor's removal a source of tension in the wigginfamily? the idea that spirits explain animal movement is referred to as: Suppose 316.0 g aluminum sulfide reacts with 493.0 g of water. What mass of the excess reactant remains?The unbalanced equation is: Al2S3 + H2O ----> Al(OH)3 + H2S 3- Increase or decrease a petty cash fund: - To Increase , debit Petty Cash and credit Cash. Debit Credit Petty Cash XXX Date Cash XXX - To decrease , debit Cash and credit Petty Cash . Debit Credit Cash XXX Date Petty Cash XXX 3- Increase or decrease a petty cash fund: If short : xxx Miscellaneous Expense cash Over & Short Cash XXX XXX If over : XXX Miscellaneous Expense cash Over & Short Cash XXX XXX Please show work clearly and graph.2. A report claims that 65% of full-time college students are employed while attending college. A recent survey of 110 full-time students at a state university found that 80 were employed. Use a 0.10 Question 6 Commonly, global brands adopt a 'glocal' approach in their promotions, opting to globalise their advertising campaigns and localise their sales promotions. What would their reasons be for doing so? Discuss and justify with examples. (1.5 pages worth of answer) (10 Marks) Nesmith Corporation's outstanding bonds have a $1,000 par value, a 6% semiannual coupon, 20 years to maturity, and an 10.5% YTM. What is the bond's price? Round your answer to the nearest cent.Last year Janet purchased a $1,000 face value corporate bond with an 11% annual coupon rate and a 10-year maturity. At the time of the purchase, it had an expected yield to maturity of 9.46%. If Janet sold the bond today for $1,155.67, what rate of return would she have earned for the past year? Do not round intermediate calculations. Round your answer to two decimal places. Do the following compounds migrate to the anode or the cathode on electrophoresis at the specified pH?a. Arginine at pH 6.8b. Histidine at pH 6.8c. Aspartic Acid at pH 4.0d. Cysteine at pH 4.0e. Gly-Val-Trp at pH 6.0f. Thr-Lys-Ile at pH 6.0 Under what conditions should organizations "unlear" Select one a. In situations involving organizational change b. Whenever new knowledge is brought into the organization c. Whenever the organization shifts from communities of practice to experimentation in the knowledge acquisition process d. In situations involving rapid technological advancement e. Whenever there is a public disapproval of business practices