The Outdoor Furniture Corporation manufactures two products, benches and picnic tables, for use in yards and parks. The firm has two main resources: its carpenters (labor force) and a supply of redwood for use in the furniture. During the next production cycle, 1,200 hours of labor are available under a union agreement. The firm also has a stock of 3,500 feet of good-quality redwood. Each bench that Outdoor Furniture produces requires 4 labor hours and 10 feet of redwood; each picnic table takes 6 labor hours and 35 feet of redwood. Completed benches will yield a profit of $9 each, and tables will result  in a profit of $20 each. How many benches and tables should Outdoor Furniture produce to obtain the largest possible profit? Use the graphical LP approach.

The value of the line integral ∫CF.dr along the given curve C is approximately equal to 3.66.

Given below:F(x, y, z) = (y^2z + 2xz^2)i + 2xyzj + (xy^2 + 2x^2z)k,C: x = \sqrt{t}, y = t + 5, z = t^2, 0 ≤ t ≤ 1

The function f such that F = ∇f is given by;

f(x, y, z) =∫ (y^2z + 2xz^2) dx + xy^2 + 2x^2z dy + xyz^2 dz

Performing partial integration with respect to x, we have:

f(x, y, z) = ∫ (y^2z + 2xz^2) dx + xy^2 + 2x^2z dy + xyz^2 dz

= (xy^2 + 2x^2z) + g(y, z)

Again performing partial integration with respect to y, we have:f(x, y, z) = (xy^2 + 2x^2z) + g(y, z)= (xy^2 + 2x^2z) + ∫2xyz dy + h(z)= xy^2 + 2x^2z + xyz^2 + C, where C is the constant of integration

Now, the part (b) requires the evaluation of ∫CF.dr along the given curve C.Substituting the values of x, y and z in the given curve C, we get;

C: x = \sqrt{t}, y = t + 5, z = t^2, 0 ≤ t ≤ 1

The limits of integration for t are from 0 to 1, since 0 ≤ t ≤ 1.

The line integral F.dr can be expressed as;

∫CF.dr = ∫CF(x(t), y(t), z(t)).r'(t) dt

Substituting F(x, y, z) and r'(t) in the above expression, we get;

∫CF.dr = ∫CF(x(t), y(t), z(t)).r'(t) dt

= ∫_{0}^{1}(y^2z + 2xz^2)(1/2) + 2xyz(1) + (xy^2 + 2x^2z)(2t) dt

= ∫_{0}^{1}(t + 5)^2 t^2 + 2(t^2)(1) + t(t + 5)^2 + 2t^2 (t^2) dt

= ∫_{0}^{1}(t^5 + 14t^4 + 56t^3 + 72t^2 + 10t) dt

= 3.66 (approx)

Therefore, the value of the line integral ∫CF.dr along the given curve C is approximately equal to 3.66.

Know more about integral here:

https://brainly.com/question/27419605

#SPJ11

P {X > Y} = P(Z > 0) = 1 - P(Z ≤ 0) = 1 - P(Z = 0) - P(Z = -1) - P(Z = -2) - ... We have to estimate the probability P {X > Y}, where X and Y are independent Poisson random variables with parameters 3 and 5.

Step 1: Calculate the expected values of X and Y using their parameters. The expected value of a Poisson distribution with parameter λ is λ itself.

Therefore, E(X) = 3 and E(Y) = 5.

Step 2: Use the fact that X and Y are independent Poisson random variables to find the probability mass function (PMF) of the random variable Z = X - Y.

The PMF of Z is given by: P(Z = k) = ∑ P(X = i)P(Y = i - k) for k = 0, ±1, ±2, ...where the sum is taken over all integers i such that P(X = i)P(Y = i - k) > 0.

Step 3: Use the PMF of Z to estimate P {X > Y} as follows:

P {X > Y} = P(Z > 0) = 1 - P(Z ≤ 0) = 1 - P(Z = 0) - P(Z = -1) - P(Z = -2) - ...

To know more about probability, refer

https://brainly.com/question/25839839

#SPJ11

We are given that z = -0.50 and the corresponding score is 20 points below the mean. We need to determine the population standard deviation.

Let μ be the population mean and σ be the population standard deviation. Then we know that the z-score is given by: z = (x - μ)/σwhere x is the score and μ is the population mean.

Substituting the given values,

we get:-0.50 = (x - μ)/20

Multiplying both sides by 20,

we get:-10 = x - μAdding μ to both sides,

we get:x = μ - 10

Therefore, the score that is 20 points below the mean is μ - 10. Substituting this value in the formula for z-score, we get:-0.50 = (μ - 10 - μ)/σ

Simplifying, we get:

0.50σ = 10σ = 20

Therefore, the population standard deviation is 20.

To know more about corresponding score visit:

https://brainly.com/question/14231671

#SPJ11

To make the ratios equivalent, we can use the numbers 3 and 6:

3 : 1 is equivalent to 6 : 3

To complete the ratios and make them equivalent, we need to find two numbers from the given set (3, 4, 6, 12, 15) that can be used to replace the question marks.

Let's start with the first ratio: ? : 1

We need to find a number that, when divided by 1, gives an equivalent ratio. Since any number divided by 1 is itself, we can choose any number from the given set for the first ratio. Let's choose 3 for this example. So, the ratio becomes:

3 : 1

Now, let's move on to the second ratio: ? : 3

Similarly, we need to find a number that, when divided by 3, gives an equivalent ratio. Looking at the given set, we see that 6 is divisible by 3. So, the ratio becomes:

6 : 3

Therefore, to make the ratios equivalent, we can use the numbers 3 and 6:

3 : 1 is equivalent to 6 : 3

for such more question on ratios equivalent,

https://brainly.com/question/2328454

#SPJ8

A probability distribution is a statistical function that explains all the possible values of a random variable and their respective probabilities.

To restore the probability mass function of a random variable, we need to sum up all the probabilities. In this question, the sum of all the probabilities is equal to 1, as follows:

P x (x) = 5k + 0.24 + 3k + 0.2 = 1

Simplifying further, we get:8k + 0.44 = 1Therefore,

8k = 1 – 0.44 = 0.56k = 0.07

The probability mass function is given below :

x -2 -1 1 4Px(x) 0.35 0.24 0.21 0.

To find the probability that X is less than 3, we need to add up the probabilities for

X = -2, X = -1 and X = 1. P(X < 3) = P(X = -2) + P(X = -1) + P(X = 1) = 0.35 + 0.24 + 0.21 = 0.8

Similarly, to find the probability that X is greater than 3, we need to add up the probabilities for

X = 4.  P(X > 3) = P(X = 4) = 0.20

Therefore, the probability that X is less than 3 and greater than 3 is 0.8 and 0.2, respectively.

To know more about statistical visit:

https://brainly.com/question/32201536

#SPJ11

To find all functions [tex]\(f\)[/tex] such that [tex]\(f(bt)\)[/tex] is a martingale, we can apply [tex]Itô's[/tex] Lemma to [tex]\(f(bt)\).[/tex]

The [tex]Itô's[/tex] Lemma formula in one dimension is:

[tex]\[df(t) = f'(t)dt + f''(t)dW(t)\][/tex]

Where:

- [tex]\(f(t)\)[/tex] represents the function we want to find.

- [tex]\(df(t)\)[/tex] represents the differential of the function.

- [tex]\(f'(t)\)[/tex] represents the first derivative of [tex]\(f\)[/tex] with respect to [tex]\(t\).[/tex]

- [tex]\(dt\)[/tex] represents an infinitesimal change in time.

- [tex]\(f''(t)\)[/tex] represents the second derivative of [tex]\(f\)[/tex] with respect to [tex]\(t\).[/tex]

- [tex]\(dW(t)\)[/tex] represents the differential of the Wiener process (a standard Brownian motion).

Now, let's apply [tex]Itô's[/tex] Lemma to [tex]\(f(bt)\):[/tex]

[tex]\[df(bt) = f'(bt)dbt + f''(bt)dW(bt)\][/tex]

Where:

- [tex]\(b\)[/tex] represents a constant.

- [tex]\(db(t)\)[/tex] represents an infinitesimal change in [tex]\(b\).[/tex]

To make [tex]\(f(bt)\)[/tex] a martingale, we require that the drift term in the differential equation is zero. Therefore, we have:

[tex]\[f'(bt)dbt = 0\][/tex]

This implies that [tex]\(f'(bt) = 0\)[/tex] for all [tex]\(t\)[/tex]. Thus, [tex]\(f(bt)\)[/tex] must be a constant function. Let's denote this constant as [tex]\(C\).[/tex] Therefore, we have:

[tex]\[f(bt) = C\][/tex]

So, all functions [tex]\(f(bt)\)[/tex] that satisfy the condition of being a martingale are constant functions of the form [tex]\(f(bt) = C\).[/tex]

To know more about martingale visit-

brainly.com/question/32293229

#SPJ11

There exists one triangle with the given sides 23, 23, and 734.

For the triangle with the given sides 23, 23 and 734, two sides are equal, and they are greater than the third side.

The following condition is valid for a triangle:

a + b > c (the sum of any two sides of the triangle is greater than the third side). Hence, a triangle exists with the given sides.

To calculate the angles, use the law of cosine:

cos A = (b² + c² - a²) / 2bc and

cos B = (a² + c² - b²) / 2ac

The angles are:

cos A = (23² + 734² - 23²) / 2 × 23 × 734

≈ 0.998

cos B = (23² + 734² - 23²) / 2 × 23 × 734

≈ 0.998

As we know that the sum of the angles of a triangle is 180°, then the third angle C can be found by:

C = 180° - (A + B)

C = 180° - (acos 0.998 + acos 0.998)

C = 4.89°

Hence, one triangle exists with the given sides and the angle C is 4.89°.

Therefore, the answer is, there exists one triangle with the given sides 23, 23, and 734.

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

Cannot determine t-test statistic and P-value without more information

To determine the value of the t-test statistic, we need to calculate it using the sample mean, sample standard deviation, and sample size. The t-test statistic is calculated as the ratio of the difference between the sample mean and the population mean (assuming no difference) to the standard error of the mean.

Given that the sample mean is x = 0.90 violations, the sample standard deviation is s = 2.35 violations, and the sample size is n = 300 inspections, we can calculate the standard error of the mean (SE) as:

SE = s / √n = 2.35 / √300 ≈ 0.1358

Next, we calculate the t-test statistic using the formula:

t = (x - μ) / SE

Since we don't have the population mean (μ) provided in the question, we cannot determine the exact t-test statistic. It seems that the necessary information is missing to calculate the t-test statistic accurately.

Moving on to the P-value, it cannot be determined without knowing the t-test statistic or the alternative hypothesis being tested. The P-value represents the probability of observing a test statistic as extreme or more extreme than the one obtained, assuming the null hypothesis is true. Without the t-test statistic or the specific hypothesis being tested, we cannot calculate the P-value accurately.

Learn more about statistic

brainly.com/question/32237714

#SPJ11

The ratios of corresponding sides are as follows:8/6 = 12/9 =20/h Simplifying the first two fractions gives:4/3 = 4/3 = 20/h Multiplying both sides by h gives:4h/3 = 4h/3 = 20 Simplifying the first two fractions gives:4h = 4h = 60 Dividing both sides by 4 gives:h = 15The height of triangle LP is 15 cm.

The three right triangles are similar. The acute angles LD, LH, and LP are all measured to be approximately 34.7°. The side lengths for each triangle are as follows:triangle LD has a base of 8 cm and a height of 6 cm.triangle LH has a base of 12 cm and a height of 9 cm.triangle LP has a base of 20 cm and a height of h cm. It is required to calculate h.The triangles are said to be similar because the angles are the same, which makes the ratios of their corresponding sides equal. The ratios of corresponding sides are as follows

:8/6 = 12/9 = 20/h

Simplifying the first two fractions gives:

4/3 = 4/3 = 20/h

Multiplying both sides by h gives

:4h/3 = 4h/3 = 20

Simplifying the first two fractions gives:

4h = 4h = 60

Dividing both sides by 4 gives:h = 15The height of triangle LP is 15 cm.

To know more about fractions visit:

https://brainly.com/question/10354322

#SPJ11

The answer is given in following parts:

(1) Is there a significant interaction between A and B?

The hypotheses H0 and H1 are given below:

H0: There is no interaction between A and B

H1: There is an interaction between A and B.

To test the interaction between A and B, the F test will be used. The value of the test statistic is given below:

F = (MSTR (AB)/MSE)

Here, MSTR (AB) is the mean square for interaction and MSE is the mean square for error. Let’s find out the value of F.F = (66.7/52.8) = 1.26

Decision Rule:

Reject H0 if the calculated F-value > F crit, where α and df1 and df2 are the level of significance and degrees of freedom for factor A, respectively.

For α = 0.05 and df1 = 2 and df2 = 12, the F crit = 3.89

Decision:

Since the calculated F-value (1.26) is less than F crit (3.89), we do not reject the null hypothesis. Hence, we can conclude that there is no interaction between A and B.

(2) Is there a significant effect of the factor A?

The hypotheses H0 and H2 are given below:

H0: There is no significant effect of A.

H2: There is a significant effect of A.

To test the effect of A, the F test will be used. The value of the test statistic is given below:

F = (MSTR (A)/MSE)

Here, MSTR (A) is the mean square for A and MSE is the mean square for error. Let’s find out the value of F.F = (933.3/52.8) = 17.68

Decision Rule:

Reject H0 if the calculated F-value > Fcrit, where α and df1 and df2 are the level of significance and degrees of freedom for factor A, respectively.

For α = 0.05 and df1 = 2 and df2 = 12, the Fcrit = 3.89

Decision:

Since the calculated F-value (17.68) is greater than Fcrit (3.89), we reject the null hypothesis. Hence, we can conclude that there is a significant effect of factor A.

(3) Is there a significant effect of the factor B?

The hypotheses H0 and H2 are given below:

H0: There is no significant effect of B.

H2: There is a significant effect of B.

To test the effect of B, the F test will be used. The value of the test statistic is given below:

F = (MSTR (B)/MSE)

Here, MSTR (B) is the mean square for B and MSE is the mean square for error. Let’s find out the value of F.F = (273.79/52.8) = 5.18

Decision Rule:

Reject H0 if the calculated F-value > Fcrit, where α and df1 and df2 are the level of significance and degrees of freedom for factor A, respectively.

For α = 0.05 and df1 = 1 and df2 = 12, the Fcrit = 4.75

Decision:

Since the calculated F-value (5.18) is greater than Fcrit (4.75), we reject the null hypothesis. Hence, we can conclude that there is a significant effect of factor B.

(4) Draw the interaction plot: (Put the levels of factor A on the X-axis)

Learn more about significant interaction here:

https://brainly.com/question/29783246

#SPJ11

Answer:

[tex]Cost \ total= \$ 1755[/tex]

Step-by-step explanation:

Find the total cost of a rectangular shaped carpet, given the carpets length,  width, and the cost of carpet per square foot. Using the formula for the area of a rectangle.

[tex]\boxed{\left\begin{array}{ccc}\text{\underline{Area of a Rectangle:}}\\\\A=l \times w\end{array}\right}[/tex]

Where...

Given:

[tex]l=15 \ ft\\w=9 \ ft\\ 1 \ ft^2= \$ 13[/tex]

Find:

[tex]Cost \ total = \ ?? \[/tex]

(1) - Calculating the total area of the carpet, which is a rectangle

[tex]A=l \times w\\\\\Longrightarrow A=15 \ ft \times 9 \ ft\\\\\therefore \boxed{A=135 \ ft^2}[/tex]

(2) Calculate the total cost of the carpet by multiplying the total area of the carpet by the cost of one square foot of carpet

[tex]Cost \ total=135 \ ft^2 \times \$ 13\\\\\therefore \boxed{\boxed{Cost \ total= \$ 1755}}[/tex]

Thus, the total cost of the carpet is found.

The exact percentages of observations that lie within one, two, and three standard deviations to either side of the mean are 68.6%, 97.1%, and 100%, respectively.

a. D. It is reasonable to apply the empirical rule. The data is quantitative and the histogram of the data is bell-shaped; therefore, the empirical rule applies.

b. The empirical rule to estimate the percentages of observations that lie within one, two, and three standard deviations to either side of the mean are as follows:68% of observations lie within one standard deviation to either side of the mean. Roughly 95 % of observations lie within two standard deviations to either side of the mean. Roughly 99.7% of observations lie within three standard deviations to either side of the mean.

c. The mean and standard deviation of these speeds are 59.53 mph and 4.21 mph, respectively. Using the data, the exact percentages of observations that lie within one, two, and three standard deviations to either side of the mean can be calculated as follows:% of observations that lie within one standard deviation to either side of the mean = 68.57%% of observations that lie within two standard deviations to either side of the mean = 97.14%% of observations that lie within three standard deviations to either side of the mean = 100%

Know more about standard deviation here:

https://brainly.com/question/13498201

#SPJ11

Answer:

280 ≥ 20 + 40x

Step-by-step explanation:

$280 is the total they can spend. and since parking is $20 it is added to the amount of people that can go x 40. This is because 40 is the amount per person.

pls mark brainliest

Compute mean, variance, standard deviation, and range to analyze the compressive strengths of the concrete blocks.

In order to analyze the compressive strengths of the concrete blocks, several statistical measures can be computed. The mean, or average, of the data set can be calculated by summing all the values and dividing by the total number of observations.

The variance, which represents the spread or variability of the data, can be computed by calculating the squared differences between each value and the mean, summing these squared differences, and dividing by the number of observations minus one. The standard deviation can then be obtained by taking the square root of the variance.

Additionally, the range, which indicates the difference between the maximum and minimum values, can be determined. These statistical measures provide insights into the central tendency and variability of the compressive strengths of the concrete blocks.

To learn more about “variability” refer to the https://brainly.com/question/14544205

#SPJ11

The correct statement is: "The MAPE for week 3 is greater than 50%."

To calculate the Mean Absolute Percentage Error (MAPE), we need to compute the absolute error and divide it by the actual value.

Then, we take the average of these percentage errors and multiply by 100 to express it as a percentage.

Based on the given table, we can calculate the MAPE for week 3:

Actual = 10

Forecast = 2

Error = |Actual - Forecast| = |10 - 2| = 8

Percentage Error = (|Actual - Forecast| / Actual) * 100 = (8 / 10) * 100 = 80%

Therefore, the MAPE for week 3 is 80%.

Now, let's analyze the given statements:

O The MAPE is between 10% and 20%:

This statement is not correct since the MAPE for week 3 is 80%, which is not within the specified range.

O The MAPE is greater than 50%:

This statement is correct since the MAPE for week 3 is 80%, which is greater than 50%.

O The MAPE is less than 5%:

This statement is not correct since the MAPE for week 3 is 80%, which is not less than 5%.

To know more about MAPE refer here:

https://brainly.com/question/30973373#

#SPJ11

Given that x = sin t and y = cos t. Firstly we need to find dy/dt and d²y/dt²dy/dt = - sin td²y/dt² = - cos t. The curve is concave upwards when d²y/dt² > 0d²y/dt² < 0  when the curve is concave downwards.

Now,- cos t < 0 when 90° < t < 270°  as cos t is negative in the 2nd and 3rd quadrant.

The open t-intervals on which the curve is concave downward or concave upward are:(90°, 270°) - Curve is concave downwards. (0°, 90°) and (270°, 360°) - Curve is concave upwards.

Note: 0° and 360° are the same and thus (0°, 90°) and (270°, 360°) covers the complete domain.

To know more about curve visit:

https://brainly.com/question/32496411

#SPJ11

The total annual Expense for a car that drives 30,000 miles per year would be around $8500 ($2500 +           $1000 + $1500 + $3500).

If you drive 30,000 miles per year, the total annual expense for this car would depend on various factors.

take a look at some of the expenses you would need to consider:

Therefore, the total annual expense for a car that drives 30,000 miles per year would be around $8500 ($2500 +           $1000 + $1500 + $3500).

For more questions on Expense .

https://brainly.com/question/30967676

#SPJ8

The correct answer is D. setne 23 47. Based on the provided information, I understand that you have a comparison function in C code and its corresponding assembly code. You are asked to fill in the blanks by selecting the appropriate instructions based on the given values of a and b and the status flags SF, OF, ZF, and CF. Let's go through the options:

A. setg 47 23: This option is incorrect because setg is used to set a byte to 1 if the Greater flag (ZF=0 and SF=OF) is set, but the given values of a and b are 47 and 23, respectively, so it does not satisfy the condition for setg to be set.

B. setl 23 47: This option is incorrect because setl is used to set a byte to 1 if the Less flag (SF≠OF) is set, but the given values of a and b are 23 and 47, respectively, so it does not satisfy the condition for setl to be set.

C. sete 23 23: This option is incorrect because sete is used to set a byte to 1 if the Zero flag (ZF=1) is set, but the given values of a and b are 23 and 23, respectively, so it does not satisfy the condition for sete to be set.

D. setne 23 47: This option is correct. setne is used to set a byte to 1 if the Zero flag (ZF=0) is not set, which means the values of a and b are not equal. In this case, the given values of a and b are 23 and 47, respectively, so they are not equal, and setne should be used.

Therefore, the correct answer is D. setne 23 47

To know more about byte visit-

brainly.com/question/32309440

#SPJ11

All the possible solutions are given byx = (2n + 1)π/2 where n is an integer Hence, x = (2n + 1)π/2 in radians or (2n + 1) * 90° in degrees for n ∈ Z.

The given equation is

sin(x/2) = cos(x/2)

Solve the equation (x in radians and 0 in degrees) for all exact solutions where appropriate. Round approximate answers in radians to four decimal places and approximate answers in degrees to the nearest degree Solution:Given equation is

sin(x/2) = cos(x/2) => tan(x/2) = 1 => x/2 = nπ + π/4,

where n is an

integer => x = 2nπ + π/2; n

is an integer.Therefore, all the possible solutions are given by

x = (2n + 1)π/2

where n is an integer Hence,

x = (2n + 1)π/2

in radians or

(2n + 1) * 90° in degrees for n ∈ Z.

To know more about integer visit:

https://brainly.com/question/490943

#SPJ11

Therefore, the probability P(1 ≤ X < 4) is closest to 0.8352.

To calculate the probability P(1 ≤ X < 4), where X represents the number of cars out of five selected at random that are speeding, we need to consider the possible outcomes and their probabilities.

Since 40% of cars are speeding, the probability of a car being speeding is 0.40, and the probability of a car not speeding is 1 - 0.40 = 0.60.

Now we can calculate the probability for each possible outcome:

[tex]P(X = 0) = (0.60)^5[/tex]

= 0.07776

[tex]P(X = 1) = ^5C_1 * (0.40)^1 * (0.60)^4[/tex]

= 0.2592

[tex]P(X = 2) = ^5C_2 * (0.40)^2 * (0.60)^3[/tex]

= 0.3456

[tex]P(X = 3) = ^5C_3 * (0.40)^3 * (0.60)^2[/tex]

= 0.2304

[tex]P(X = 4) = ^5C_4 * (0.40)^4 * (0.60)^1[/tex]

= 0.0768

[tex]P(X = 5) = (0.40)^5[/tex]

= 0.01024

To find P(1 ≤ X < 4), we sum the probabilities for X = 1, 2, and 3:

P(1 ≤ X < 4) = P(X = 1) + P(X = 2) + P(X = 3)

= 0.2592 + 0.3456 + 0.2304

= 0.8352

To know more about probability,

https://brainly.com/question/31217970

#SPJ11

The given data can be used to find the mean number of murders per day in the city as follows:

Mean number of murders per day =

Total number of murders in the year ÷ Number of days in the year

= 638/365≈1.75

So, the mean number of murders per day in the city is approximately 1.75.

Now, we need to use this result to find the probability that in a single day, there are no murders.

Let X be the number of murders in a single day.

Since we know the mean number of murders per day, we can use the Poisson distribution to find the probability of X = 0.

The Poisson distribution is given by:P(X = k) = (e^(-λ) λ^k) / k!

where λ is the mean number of events in a given interval.

In this case, λ = 1.75 and we want to find P(X = 0).

So, we have:P(X = 0) = (e^(-1.75) 1.75^0) / 0!≈ 0.1733

Therefore, the probability that in a single day, there are no murders is approximately 0.1733 or 17.33%.

To know more about probability visit :-

https://brainly.com/question/13604758

#SPJ11

To find the critical value for a hypothesis test regarding the average amount of time a person wants to listen to Blake Shelton, we need to know the significance level (α) and whether it's a one-tailed or two-tailed test.

The general process of finding the critical value for a hypothesis test. Determine the significance level (α): This is the predetermined threshold at which you will reject the null hypothesis. Common choices for α are 0.05 (5%) or 0.01 (1%). Determine the degrees of freedom (df): In this case, since you have a sample of n = 35, the degrees of freedom would be n - 1 = 35 - 1 = 34. Determine the tail(s) of the test: Depending on the alternative hypothesis, you may have a one-tailed or two-tailed test. In a one-tailed test, you are interested in deviations in one direction (e.g., average listening time being greater or less than a specific value). In a two-tailed test, you are interested in deviations in either direction (greater or less than a specific value). Look up the critical value: Using the significance level and degrees of freedom, consult a t-distribution table or use statistical software to find the critical value. Be sure to match the tail(s) of the test correctly.

Learn more about sample here:

https://brainly.com/question/31416337

#SPJ11

Answer: B = 1.9

Step-by-step explanation:

A=5

C=12

B=x

Pythagorean Theorem: 5^2 + x^2 = 12^2  

25+x^2=144

x^2=119

[tex]\sqrt{19}[/tex]≈10.9

The standard deviation S for the sampling distribution of the sample mean, is calculated as follows:S = σ/√nwhere σ is the population standard deviation and n is the sample size. Thus, substituting the values of σ = 3.6 and n = 5, we get;S = 3.6/√5S = 1.612The value of x = 0 since we are looking for the standard deviation of the sampling distribution of the sample mean. Therefore, the answer is S = 1.612 and x = 0.

The standard deviation S is a parameter because it is calculated using population values, in this case, σ. On the other hand, the mean of the sample is a statistic because it is calculated from the sample data.(c) Since the sample size n is less than 30, the conditions for using the Central Limit Theorem are not fulfilled. The Central Limit Theorem requires a sample size greater than or equal to 30.

To know more  about substituting visit :-

https://brainly.com/question/29383142

#SPJ11

The variables that would be best modeled as continuous random variables are C and D.

C; The distance between two cars on the freeway can take on any real value within a certain range. It is a continuous variable because it can be measured and divided into infinitely many possible values.

D; The height of a skyscraper in New York City is also a continuous variable. The height can vary continuously from very short to very tall, and it can be measured and divided into infinitely many possible values.

A and B, on the other hand, would be better modeled as discrete random variables.

A; The number of movies watched by a person in one year is a discrete variable because it can only take on whole numbers. You can't watch a fraction of a movie.

B; The number of newborn babies delivered in a hospital on a certain day is also a discrete variable. The number of newborn babies is counted in whole numbers and cannot take on fractional values.

Therefore, variables C and D are best modeled as continuous random variables, while variables A and B are better modeled as discrete random variables.

To know more about continuous random variables refer here:

https://brainly.com/question/30789758

#SPJ11

The mean rent for a one-bedroom apartment in Seattle in May 2021, based on the sample of monthly rents, is $1959.

To find the mean rent, we sum up all the rents in the given sample and divide by the number of data points.

1: Add up the rents.

1895 + 2127 + 1585 + 2181 + 1800 + 2000 + 1975 + 1895 = 15258.

2: Determine the number of data points.

There are 8 data points in the given sample.

3: Calculate the mean rent.

Divide the sum of rents by the number of data points:

15258 / 8 = 1907.25.

4: Round the mean to the nearest whole number.

Rounding 1907.25 to the nearest whole number, we get $1959.

Hence, the mean rent based on this sample, is $1959.

To know more about mean refer here:

https://brainly.com/question/31101410

#SPJ11

The probability that there will be more than 5 power cuts in a year is 0.0563.

Let X denote the number of power cuts in a year.

Then X has a Poisson distribution with parameter λ = 3.

The probability that there will be more than 5 power cuts in a year is

P(X > 5) = 1 - P(X ≤ 5)P(X > 5)

= 1 - ∑_{i=0}^5 [e^{-\lambda} \frac{\lambda^i}{i!}]

Using this equation, we can calculate the probability P(X > 5) = 0.0563

Therefore, the probability that there will be more than 5 power cuts in a year is 0.0563.

Know more about probability here:

https://brainly.com/question/251701

#SPJ11

The 4th degree Taylor polynomial for tan(x) centered at x = 0 is T4(x) = x + (1/3)x^3 + (2/15)x^5 + (17/315)x^7.
The 10th degree Taylor polynomial centered at x = 1 for the function f(x) = 2x^2 - x + 1 is T10(x) = -15 + 23(x-1) + 12(x-1)^2 + 8(x-1)^3 + 32(x-1)^4 + 16(x-1)^5 + 32(x-1)^6 + 16(x-1)^7 + 32(x-1)^8 + 16(x-1)^9 + 32(x-1)^10.

To find the 4th degree Taylor polynomial for tan(x) centered at x = 0, we can use the Maclaurin series expansion of tan(x) and truncate it at the 4th degree. The general formula for the nth degree Taylor polynomial is given by Tn(x) = f(0) + f'(0)x + (f''(0)/2!)x^2 + ... + (f^n(0)/n!)x^n. Plugging in the derivatives of tan(x) at x = 0, we can simplify the expression and obtain T4(x) = x + (1/3)x^3 + (2/15)x^5 + (17/315)x^7.
For the function f(x) = 2x^2 - x + 1, we need to find the 10th degree Taylor polynomial centered at x = 1. Using the same formula as above, we can evaluate the function and its derivatives at x = 1 and plug them into the Taylor polynomial formula. Simplifying the expression gives T10(x) = -15 + 23(x-1) + 12(x-1)^2 + 8(x-1)^3 + 32(x-1)^4 + 16(x-1)^5 + 32(x-1)^6 + 16(x-1)^7 + 32(x-1)^8 + 16(x-1)^9 + 32(x-1)^10. This is the 10th degree polynomial approximation of the function f(x) centered at x = 1.

Learn more about Taylor polynomial here
https://brainly.com/question/30481013



#SPJ11

The probabilities are given as follows:

a. Ok in reliability: 2/3 = 0.667.

b. Weak in reliability, given that it has high insensitivity: 3/10 = 0.3.

The parameters that are needed to calculate a probability are listed as follows:

Then the probability is calculated as the division of the number of desired outcomes by the number of total outcomes.

There are 150 devices, and of those, 100 are ok in reliability, hence the probability for item a is given as follows:

100/150 = 2/3.

100 of the devices have high insensitivity, and of those, 30 have weak reliability, hence the probability for item b is given as follows:

30/100 = 3/10.

Learn more about the concept of probability at https://brainly.com/question/24756209

#SPJ4