Santiago, the capital city of Chile, is one of the most polluted cities in South America, and the contamination of its atmosphere poses significant risks to public health. There are several sources of pollution in Santiago, but one of the most significant causes of the city's smog is the thermal inversion .
Thermal inversion refers to the atmospheric condition in which a layer of warm air overlies a layer of cooler air near the ground. Under normal conditions, warm air rises, and cooler air sinks, causing convection that helps disperse pollutants .However, in the case of a thermal inversion, the warm air layer traps the cool air and the pollutants close to the surface, preventing them from escaping.
Most of the pollution comes from transportation, and the topography of Santiago, coupled with the thermal inversion effect, makes the problem worse. Cars, buses, trucks, and other vehicles emit a variety of pollutants, including nitrogen oxides, particulate matter, and sulfur dioxide, which become trapped in the city's atmosphere. These pollutants can then lead to serious respiratory problems, such as asthma, bronchitis, and emphysema.
Therefore, Santiago has become a city that faces many environmental challenges, including pollution and climate change, which are harmful to the health and well-being of its citizens.
To know more about contamination visit :
brainly.com/question/28328202
#SPJ11
An ocean 'farm' can grow 430 gC/m2/yr seaweed. The United States would like to produce 1x10^15 gC/yr of seaweed (1,000,000,000,000,000 gC/yr). How many square km of ocean is required to grow this amount of seaweed? (you can use a calculator for this)
The amount of seaweed that the United States would like to produce is 1x10^15 gC/yr and it is given that an ocean 'farm' can grow 430 gC/m2/yr seaweed. To find how many square km of ocean is required to grow this amount of seaweed, we need to use the following formula.
To produce 1x10^15 gC/yr of seaweed, 2.32x10^18 km2 of ocean would be required. This is a massive area that is almost impossible to imagine. To put it in perspective, the total area of the Earth's surface is approximately 5.1x10^8 km2, which means that we would need more than 4.5 million Earths to grow enough seaweed to meet the United States' target.Therefore, it is clear that relying solely on ocean 'farms' to produce such a huge amount of seaweed is not a practical solution. However, seaweed cultivation can still be a useful strategy for sustainable food production and reducing carbon emissions. Seaweed is rich in nutrients, protein, and minerals, and can be used as food for humans and animals, as well as for biofuels and fertilizers.
In conclusion, while it is interesting to calculate the amount of ocean required to grow a specific amount of seaweed, it is important to consider the practicality and sustainability of such a solution. Seaweed farming can be a part of a larger strategy to address food security and climate change, but it is not a silver bullet that can solve all of our problems.
To know more about seaweed visit:
brainly.com/question/29142844
#SPJ11
The
country for this assignment is Brazil.
After doing research on your nation and making your poster, now start to think how your nation fits into the rest of the world. What are its strengths and weaknesses? What can it offer other countries
Brazil, the world's fifth largest nation, is endowed with an extensive array of natural resources, including oil, minerals, water, and timber. Brazil is the world's ninth largest economy and the largest in Latin America. Brazil has a wide range of economic strengths, including a well-established industrial base, a diversified service sector, and a dynamic agricultural sector.
Brazil's strengths and weaknesses are closely intertwined, and the country's long-term success will depend on addressing its social, political, and environmental challenges. Brazil has the potential to play a significant role in the global economy, but it will need to invest in education, healthcare, and other social services to ensure that all citizens can participate in its growth. Brazil's government will also need to address issues of corruption and political instability to build public trust and strengthen democratic institutions. Finally, Brazil must take urgent action to address environmental challenges and protect its rich biodiversity. By addressing these challenges, Brazil can become a more resilient and sustainable nation and contribute to global efforts to address climate change and other pressing issues.
In conclusion, Brazil is a nation with many strengths and weaknesses. Brazil is rich in natural resources, has a dynamic economy, and a skilled labor force. However, Brazil is also grappling with significant social, political, and environmental challenges. Brazil's success in the global economy will depend on its ability to address these challenges and build a more equitable, sustainable, and prosperous society.
To know more about extensive array of natural resources visit:
brainly.com/question/693942
#SPJ11
choose the correct answer
4. The mineralization is: a. fill the holes of the joint plane. O b. Enlarge the joint plane. c. Increases the jointing.
The correct answer is a. Fill the holes of the joint plane.
Which option describes the process of mineralization?Mineralization refers to the process by which minerals fill the voids or openings within a joint plane. It involves the deposition or precipitation of minerals, which can occur in fractures, cracks, or spaces within rocks or other geological formations. The minerals, often dissolved in water, are deposited over time, gradually filling the gaps and solidifying the rock structure.
This process plays a significant role in geological formations and can have various effects on the properties of rocks. Mineralization can strengthen the joint plane by filling the voids, thereby enhancing the overall stability and integrity of the rock mass. It can also contribute to the alteration of rock composition and structure.
In certain cases, mineralization can result in the enlargement of the joint plane. The deposition of minerals within the joint can cause the opening to expand as the minerals accumulate, leading to increased joint width.
Understanding the process of mineralization is crucial in geological studies and resource exploration. It helps in interpreting the formation and composition of rocks, as well as in identifying potential mineral deposits. Additionally, it aids in assessing the stability and behavior of rock masses in engineering and construction projects.
Learn more about Mineralization
brainly.com/question/30472865
#SPJ11
Which of the following is correct concerning Earthquake Lake in Montana?
a. the contributing factors were slope overloading and the removal of trees on the slope, and the trigger was an earthquake
b. the contributing factors were steeply incline foliation and stream undercutting, and the trigger was a volcanic eruption
c. the contributing factors were slope overloading and stream undercutting, and the trigger was an massive rain event
d. the contributing factors were steeply incline foliation and stream undercutting, and the trigger was an earthquake
Among the given options, the correct one concerning Earthquake Lake in Montana is: c). the contributing factors were slope overloading and the removal of trees on the slope, and the trigger was an earthquake.
Earthquake Lake, also known as Quake Lake, is a man-made lake located in southwestern Montana, USA. This lake was created after an earthquake with a magnitude of 7.5 Richter scale that occurred on August 17, 1959, at 11:37 pm.
The earthquake caused a massive landslide, which then blocked the Madison River and formed a natural dam. This event created a natural lake with a length of 5 miles (8 km), width of 0.25 miles (0.4 km), and a maximum depth of 190 feet (58 m).
The earthquake resulted in the death of 28 people, while the formation of the lake provided a habitat for many species of fish and aquatic animals.
Thus, the correct option concerning Earthquake Lake in Montana is c). "the contributing factors were slope overloading and the removal of trees on the slope, and the trigger was an earthquake."
Learn more about Earthquake Lake: brainly.com/question/28450034
#SPJ11
Earthquake Lake is located in southwestern Montana. It is one of the largest earthquakes ever to hit the United States, registering 7.5 on the Richter scale. It caused massive landslides and rockfalls, creating a new lake, which is also known as Quake Lake. The contributing factors were slope overloading and the removal of trees on the slope, and the trigger was an earthquake.
Thus, the correct option is a. Slope overloading and the removal of trees on the slope are contributing factors that make the ground unstable. The occurrence of an earthquake can set off a landslide if the ground is unstable. The earthquake of August 17, 1959, caused a landslide that dammed the Madison River, creating a new lake called Earthquake Lake.
To know more about Richter scale visit :
https://brainly.com/question/14028329
#SPJ11
What is the theoretical best performance a telescope can have? 1000 times the human eye Spectral lines O The blackbody curve O The speed of light Diffraction limit What is the name of our textbook? O The Cosmic Perspective O Astronomy for Dummies O Introduction to Astronomy and Cosmology Astronomy Today O This is a trick question, we aren't using a textbook in this class!
The diffraction limit is the fundamental factor that determines the theoretical best performance of a telescope. It refers to the smallest details a telescope can resolve, based on the principles of diffraction. When observing an object, the light waves passing through the aperture of a telescope spread out and interfere with each other, leading to a phenomenon called diffraction.
This phenomenon imposes a limit on the smallest angular separation between two objects that can be resolved by the telescope. The diffraction limit depends on the wavelength of light being observed and the size of the telescope's aperture. It sets the ultimate boundary for the level of detail that can be captured by a telescope, regardless of its magnifying power or other factors.
Learn more about telescope
brainly.com/question/19349900
#SPJ11
Describe some of the astronomical images. effects/difficulties we have to consider when making 12pt A Edit View Insert Format Tools Table Paragraph B IUA 2 T² v V : What is the significance of sunspots? What other Solar phenomena are they related to and how
Sunspots are one of the most significant astronomical images, which help in making accurate observations of Solar phenomena.
Sunspots are temporary phenomena on the Sun's surface that appear as dark spots compared to surrounding regions. These spots are related to solar activity and magnetic fields, which is why they are significant in astronomy. What is the significance of sunspots? Sunspots have a significant role in the study of solar activity. They help scientists to observe and monitor the solar surface and the outer atmosphere. Moreover, sunspots' study helps in understanding the Sun's magnetic fields, which play a crucial role in the formation of the solar atmosphere. Additionally, sunspots play an essential role in the study of the Sun's variability, which directly affects Earth and other planets in the solar system. What other Solar phenomena are they related to and how? Sunspots are related to several other solar phenomena, which are as follows: Coronal mass ejections (CMEs)Solar flares Geomagnetic storms Solar wind. All of these phenomena are related to solar activity and the Sun's magnetic field. Sunspots are indicators of active regions on the Sun's surface, which are often the origin of these phenomena. CMEs are massive explosions of plasma and magnetic fields that erupt from the Sun's surface. Solar flares are intense bursts of radiation that are released from active regions on the Sun's surface. Geomagnetic storms are caused by the interaction of the solar wind with the Earth's magnetic field. All of these phenomena are closely related to sunspots, which makes them significant for the study of the Sun and its impact on the solar system.
You can learn more about Sunspots at: https://brainly.com/question/13969679
#SPJ11
why is the mid atlantic ridge responsible for creating iceland
The Mid-Atlantic Ridge is responsible for creating Iceland due to the tectonic activity occurring along the ridge. The Mid-Atlantic Ridge is a divergent plate boundary where the Eurasian Plate and the North American Plate are moving away from each other. As the plates diverge, magma from the Earth's mantle rises to the surface, creating new crust and pushing the existing crust apart.
In the case of Iceland, it sits directly atop the Mid-Atlantic Ridge. The volcanic activity associated with the ridge has led to the formation of a series of underwater volcanoes along the ridge. Over time, these volcanic eruptions have built up layers of lava and volcanic material, gradually forming an island.
The continuous movement of the tectonic plates along the Mid-Atlantic Ridge causes the landmass to be pulled apart, resulting in the widening of the rift. This process leads to the creation of new crust and the formation of volcanic activity on the surface. The combination of volcanic eruptions and the spreading of the crust has contributed to the growth of Iceland over millions of years.
Iceland is known for its geothermal activity and numerous volcanoes, which are a direct result of its location on the Mid-Atlantic Ridge. The volcanic eruptions have played a crucial role in shaping the island's landscape and have contributed to the unique geological features found in Iceland.
In summary, the Mid-Atlantic Ridge creates Iceland through the ongoing tectonic activity of plate divergence, which results in volcanic eruptions and the accumulation of lava and volcanic material over time. This process has led to the formation and growth of the island as we know it today.
To know more about Geothermal visit-
brainly.com/question/2624739
#SPJ11
Describe food production in canada and population growth also describe the various sectors like tertiary ,primary and secondary sector .
At last give conclusion of this topic.
Write it in about 350 words.
please write in own language dont try to copy from internet .
thank you
Food production in Canada has been on the rise over the past few years. The country's population growth has been significant as well. With this growth, the food industry has continued to expand to keep up with the demand. The various sectors involved in food production include the primary, secondary, and tertiary sectors.
The primary sector of the food industry in Canada includes the production of raw materials such as farming, fishing, and forestry. These activities are typically carried out in rural areas of the country. The secondary sector is responsible for processing raw materials and transforming them into finished products. For example, flour mills turn wheat into flour, while meat processing plants turn animals into meat products. The tertiary sector of the food industry includes the sale and distribution of food products to consumers.
Canada's population growth has been a key driver of the growth in the food industry. The increase in the number of people has led to increased demand for food products. The government has also played a role in supporting the growth of the food industry by providing funding for research and development, as well as marketing and promotion.
To know more about growth visit:
https://brainly.com/question/28789953
#SPJ11
All of the following are true about both primary and secondary succession EXCEPT
both lead to a stable climax community.
both include a progression of changes in the community over time.
both occur in regions where soil is already present.
for both communities, fungi and vascular seedless plants are typically the first species to colonize the area.
both are colonized first by opportunistic species.
Succession is the term used to describe the sequence of species that colonize an ecosystem over time. Primary and secondary successions are the two major types of ecological succession. However, one of the following statements is false regarding both primary and secondary succession.
This statement is “both lead to a stable climax community.” Succession is a predictable and well-defined series of events that takes place in an ecosystem over time. Ecologists divide succession into two main types: primary and secondary succession.Primary succession refers to the establishment and development of an ecosystem in an area that was previously uninhabited. Pioneer species are the first to arrive in a primary succession area, which begins with a barren area. These species include lichens and mosses, which help to create soil by breaking down rocks into smaller pieces.
Once the soil has been created, herbaceous plants can begin to grow, followed by shrubs and trees. In primary succession, it takes a lot of time for a stable climax community to be established, because the environment is totally new, and there is no existing soil.Secondary succession refers to the development of an ecosystem in an area where a community that previously existed has been disrupted. It occurs when the natural vegetation is removed, such as by fire, flood, or human activity. Secondary succession is quicker than primary succession, and it begins with the soil that was left behind after the disturbance.
In secondary succession, the time it takes for a stable climax community to establish is shorter than in primary succession, and it is not entirely predictable because the environment has been disturbed, and the initial stages of the new community are dependent on the nature and extent of the previous disturbance. Both primary and secondary successions include a progression of changes in the community over time and are colonized first by opportunistic species.In conclusion, the false statement regarding both primary and secondary succession is “both lead to a stable climax community.”
To know more about describe visit:
https://brainly.com/question/18916761
#SPJ11
Question 23 of 25 4 points Which of the following effect sea level rise? Choose all that apply. Erosion causes land to sink. Sediment compaction causes land to sink. Melting glaciers and ice sheets boost the ocean's volume As ocean water warms, it expands. Previous Question Next Ques Question 24 of 25 1 point True or False: Saltwater intrusion of freshwater aquifers is not a system that is prone to tipping point behavior. Choose the best answer. O True O False
The factors that cause sea level rise are as follows melting glaciers and ice sheets boost the ocean's volume.Saltwater intrusion of freshwater aquifers is not a system that is prone to tipping point behavior is False.
Saltwater intrusion of freshwater aquifers is a system that is prone to tipping point behavior. Tipping point behavior is defined as a system's ability to recover from a certain disturbance.
A saltwater intrusion is a phenomenon that occurs when seawater migrates toward freshwater aquifers, contaminating them and lowering their quality.
A tipping point for saltwater intrusion is when the groundwater is no longer able to contain the seawater, resulting in the collapse of freshwater aquifers. Due to the absence of freshwater aquifers, the society or any habitat cannot survive.
Therefore, Saltwater intrusion of freshwater aquifers is a system that is prone to tipping point behavior.
Learn more about glaciers : brainly.com/question/6666513
#SPJ11
Sea level rise can have a major impact on coastal communities, and it is important to understand the different factors that contribute to it.
The following are some of the effects of sea level rise:Erosion causes land to sinkSediment compaction causes land to sink Melting glaciers and ice sheets boost the ocean's volumeAs ocean water warms, it expands.
Saltwater intrusion is when saltwater enters freshwater aquifers. The movement of saltwater into freshwater aquifers can cause a number of problems, including making the freshwater unusable. It is possible for saltwater intrusion to reach a tipping point where the concentration of salt in the freshwater becomes too high for it to be used.
Therefore, the given statement "Saltwater intrusion of freshwater aquifers is not a system that is prone to tipping point behavior." is False.
To know more about Erosion visit :
https://brainly.com/question/30587260
#SPJ11
Calculate the amount of radiation emitted by a blackbody with a temperature of 279 K. Round to the nearest whole number (e.g., no decimals) and input a number only, the next question asks about units. If the albedo of a planet is 0.4, and the incoming solar radiation is 352 Wm-2, how much radiation is absorbed by the planet? Round to the nearest whole number (e.g., no decimals) and input a number only, the next question asks about units. Calculate the radiative equilibrium temperature (in K) of a planet with an albedo of 0.5 and incoming solar radiation of 312. Round to the nearest whole number (e.g., no decimals) and input a number only!
The amount of radiation emitted by a blackbody with a temperature of 279 K is approximately 5836 W (rounded to the nearest whole number).
How much radiation does a blackbody with a temperature of 279 K emit?To calculate the amount of radiation emitted by a blackbody, we can use the Stefan-Boltzmann law, which states that the power radiated by a blackbody is proportional to its temperature raised to the fourth power. By plugging in the given temperature of 279 K into the equation, we can determine the amount of radiation emitted.
The Stefan-Boltzmann law equation is given by:
P = σT^4
Where:
P is the power emitted,
σ is the Stefan-Boltzmann constant (approximately 5.67 x 10^-8 Wm^-2K^-4),
T is the temperature in Kelvin.
Substituting the values into the equation:
P = (5.67 x 10^-8 Wm^-2K^-4)(279 K)^4
P = 5836 W (rounded to the nearest whole number)
Blackbody radiation is a fundamental concept in physics that describes the electromagnetic radiation emitted by an idealized object known as a blackbody. A blackbody absorbs all incident radiation and emits radiation across a wide range of wavelengths. The amount of radiation emitted by a blackbody is determined by its temperature, with higher temperatures resulting in greater radiation output.
The Stefan-Boltzmann law quantifies this relationship and states that the total power radiated by a blackbody is proportional to the fourth power of its absolute temperature. By applying the law to the given temperature of 279 K, we have determined that the amount of radiation emitted by the blackbody is approximately 5836 W.
Understanding blackbody radiation and its dependence on temperature is crucial in various fields of science, including astrophysics and thermodynamics. It allows us to study the energy exchange between objects and the surrounding environment and provides insights into the behavior of celestial bodies, such as stars and planets.
Learn more about radiation
brainly.com/question/31106159
#SPJ11
Look up the origins of state names, and list 4 that come from Native American languages. Do the same for 4 rivers and 4 mountains. Next list 4 cars with Native American names and 4 military weapons and 4 sports teams. Look in your refrigerator, cabinets, etc.- do you find any products with Native American names/images? Why does America have such a fascination, even obsession, with Native Americans (remember, today, Native Americans are about 2% of the population and Americans fought wars against its indigenous populations).
Understanding and respecting Native American cultures and their contributions is vital for promoting cultural understanding and reconciliation.
What are some examples of Native American names and influences in state names, rivers, mountains, cars, military weapons, sports teams, and products in the United States?Exploring the origins of state names, rivers, mountains, car names, military weapons, sports teams, and products with Native American names/images can involve an extensive list. However, I can provide a brief overview:
State Names from Native American Languages:Alabama: Derived from the Alabama tribe.
Massachusetts: Derived from the Massachusett tribe.
Kentucky: Derived from the Iroquoian word "Ken-tah-ten," meaning "land of tomorrow."
Oklahoma: Derived from the Choctaw words "okla" and "humma," meaning "red people."
Rivers from Native American Names:Mississippi River: Derived from the Ojibwe (Anishinaabe) word "Misi-ziibi," meaning "Great River."
Colorado River: Derived from the Spanish word for "red," referring to the river's muddy color.
Missouri River: Derived from the name of the Missouri tribe, which means "town of the large canoes."
Ohio River: Derived from the Iroquoian word "Ohi-yo," meaning "good river."
Mountains from Native American Names:Mount Katahdin: Derived from the Penobscot word "Ktaadn," meaning "The Greatest Mountain."
Mount Rainier: Named after Peter Rainier, a British naval officer, but the mountain itself has indigenous names such as Tahoma and Tacoma.
Mount Shasta: Derived from the name given by the Karuk tribe, possibly meaning "white mountain."
Mount Hood: Named after Samuel Hood, a British admiral, but it is known by its indigenous name Wy'east.
Cars with Native American Names:Jeep Cherokee: Named after the Cherokee Native American tribe.
Pontiac Aztek: Derived from the Aztec civilization of Mesoamerica.
Dodge Dakota: Named after the Dakota Native American tribe.
Chevrolet Apache: Named after the Apache Native American tribe.
Regarding military weapons, sports teams, and products with Native American names/images, it's important to note that the use of Native American names, symbols, and imagery has been a subject of controversy and debate. Some argue that it perpetuates stereotypes and cultural appropriation.
America's fascination and obsession with Native Americans can be attributed to various factors, including the romanticized portrayals of indigenous cultures in media, literature, and popular culture.
Native American history and spirituality have also intrigued many Americans. However, it's crucial to recognize that historical mistreatment, conflicts, and forced assimilation have created complex relationships between Native Americans and the larger American society.
Learn more about Native American
brainly.com/question/8678061
#SPJ11
what is the main crop in the ganges valley of south asia?
The Ganges Valley of South Asia is one of the most fertile agricultural regions in the world. This region is home to several crops, but the most important crop is rice. Other crops such as wheat, sugarcane, maize, cotton, and oilseeds are also grown in the Ganges Valley, but rice is the main crop for this region.
More than 100 words:The Ganges Valley of South Asia is one of the most fertile agricultural regions in the world. It is located in India and Bangladesh and is home to several crops. The valley is formed by the Ganges River, which is a significant source of water for the crops grown in this region.The Ganges River is a holy river in India, and it is also one of the longest rivers in the world. The Ganges River basin is home to over 400 million people and is one of the most densely populated regions globally.
The valley is an essential source of food for the local population, and it also provides a significant portion of the food that is exported from India.Rice is the main crop grown in the Ganges Valley of South Asia. Rice is a staple food in this region and is consumed in various forms, such as boiled rice, fried rice, and rice cakes. Other crops such as wheat, sugarcane, maize, cotton, and oilseeds are also grown in the Ganges Valley, but rice is the main crop for this region.Rice is a crop that requires a lot of water to grow, which is why it is grown in the Ganges Valley. The Ganges River provides the necessary water for rice cultivation, and the fertile soil in the region is ideal for growing rice.
The cultivation of rice in the Ganges Valley is done using traditional farming techniques, and the process is still carried out manually. The traditional farming techniques used in this region are environmentally friendly and help to preserve the natural resources of the region.In conclusion, the Ganges Valley of South Asia is an essential agricultural region, and rice is the main crop grown in this region. The cultivation of rice in this region provides food for the local population and is also a significant source of income through exports. Other crops such as wheat, sugarcane, maize, cotton, and oilseeds are also grown in the region, but rice is the most important crop.
To know more about Valley visit:
https://brainly.com/question/27916620
#SPJ11
the wavelength for the calcium lines in the ursa major galaxy
The wavelength of the calcium lines in the Ursa Major galaxy is 393.3 nanometers (nm) and 396.8 nm.
A spectral line is a dark or bright line seen in a spectrum caused by the absorption or emission of electromagnetic radiation at particular wavelengths by atoms or molecules. Different chemical elements emit and absorb light at different wavelengths, which is why spectral lines are utilized to identify them.
The two most prominent calcium lines in the visible spectrum are located at 393.3 nanometers (nm) and 396.8 nm, and they both fall in the violet/blue region of the spectrum.
The Ursa Major galaxy is a spiral galaxy that is located about 30 million light-years away from Earth. Calcium spectral lines in this galaxy can be used to identify the existence of calcium in the galaxy's stars and interstellar material.
While the precise wavelengths of these lines in the Ursa Major galaxy may vary depending on the specifics of the emission or absorption event, they should still be in the same general vicinity as the calcium lines on Earth at 393.3 nm and 396.8 nm.
Learn more about Ursa Major galaxy: brainly.com/question/30113064
#SPJ11
Id actually like to post a question to the history department, like ive seen people do here; however, there is no option to do so. the question is the following:
Discuss the crystallization of Islamic Law in the 8-9th centuries as part of broad political, cultural and intellectual processes of the period.
The crystallization of Islamic law in the 8th and 9th centuries was due to the broad political, cultural, and intellectual processes of the period. This was a time of great change in the Islamic world, with the emergence of new political and cultural institutions and the development of a sophisticated legal system.
At the same time, Islamic scholars were engaged in a lively intellectual exchange, debating issues of theology, law, and philosophy.One of the key factors that led to the crystallization of Islamic law during this period was the need to establish a stable legal framework for the new political institutions that were emerging. As Islamic societies became more complex, there was a growing need for a system of laws that could govern the behavior of individuals and institutions.
Another important factor was the growing influence of Islamic scholars and jurists, who played a central role in the development of Islamic law. These scholars were highly respected within Islamic society and were regarded as authorities on matters of Islamic law and theology.
To know more about crystallization visit:
https://brainly.com/question/32130991
#SPJ11
highlighting the factors that need to be considered when building a wind farm (including social, environmental, and technical factors) and, in general terms, discuss the suitability of the site for developing a wind farm.
Show and evaluate the spatial distribution of noise from the wind farm and discuss its impact and mitigation options for the surrounding area.
Show the area that will be affected by shadow flicker, explaining its effect and options for mitigation.
Provide and critique a ZVI map for the site without any buildings or trees.
Evaluate and critique the annual energy yield and capacity factor of the site.
Calculate and discuss the expected GHG emissions savings for your wind farm.
Discuss the planning and monitoring process to establish a wind farm on the site
Explain the importance of a site assessment and include the limitations of your calculations.
Explain what other necessary tools and analyses are needed to carry out further investigations.
When building a wind farm, factors such as social acceptance, environmental impact, and technical feasibility must be considered. Conducting a site assessment helps determine suitability, while mitigating noise and shadow flicker impacts. Additional tools like wind resource assessment, environmental impact assessments, and economic analysis aid in further investigations.
How to assess and develop a wind farm site?Building a wind farm requires careful consideration of various factors, including social, environmental, and technical aspects. Let's discuss each of these factors and evaluate the suitability of the site for developing a wind farm.
1. Social Factors:
- Public acceptance: Consider the views and concerns of local communities, as well as the potential benefits the wind farm can bring to the area.
- Stakeholder engagement: Involve relevant stakeholders, such as residents, businesses, and local authorities, in the decision-making process and address their concerns.
2. Environmental Factors:
- Wind resource assessment: Analyze wind data to determine the site's wind resource potential, including wind speed, direction, and turbulence levels.
- Wildlife and biodiversity: Identify any sensitive habitats, protected species, or bird migration routes that could be affected. Conduct environmental impact assessments and implement mitigation measures.
3. Technical Factors:
- Grid connection: Assess the proximity and capacity of the electrical grid to connect the wind farm and ensure adequate transmission infrastructure.
- Wind turbine selection: Choose appropriate turbine models based on the wind resource, site conditions, and project requirements.
Spatial Distribution of Noise:
Noise generated by wind turbines can be a concern for nearby residents. To evaluate and mitigate noise impacts, factors such as turbine type, rotor diameter, wind speed, and distance from the turbines to sensitive areas need to be considered. Noise modeling can be used to predict noise levels at different distances from the turbines.
Shadow Flicker:
Shadow flicker refers to the intermittent shadows cast by rotating wind turbine blades. The affected area depends on the sun's position, turbine location, and surrounding topography.
ZVI Map:
Without specific site information, it's challenging to provide a ZVI (Zone of Visual Influence) map. A ZVI map illustrates the areas where wind turbines are visible from surrounding viewpoints. It helps assess the visual impact of the wind farm. However, limitations such as topography, vegetation, and other obstructions need to be considered when creating a ZVI map.
Annual Energy Yield and Capacity Factor:
The annual energy yield of a wind farm depends on the wind resource, turbine efficiency, and capacity factor. The capacity factor represents the actual energy produced relative to the maximum possible output.
Expected GHG Emissions Savings:
To calculate the expected greenhouse gas (GHG) emissions savings, the annual energy production from the wind farm is compared to the equivalent energy that would have been produced from conventional fossil fuel sources. The GHG emissions avoided are calculated based on the emissions intensity of the displaced fossil fuel generation.
Planning and Monitoring Process:
Establishing a wind farm involves several stages, including site selection, feasibility studies, environmental assessments, permitting, financing, construction, and ongoing monitoring. The planning process typically involves collaboration with stakeholders, conducting impact assessments, obtaining permits, and addressing regulatory requirements.
Importance of Site Assessment and Limitations:
A thorough site assessment is crucial for wind farm development. It helps determine the site's suitability, technical feasibility, and potential impacts. However, limitations may arise due to the availability and quality of data, the complexity of environmental assessments, stakeholder dynamics, and unforeseen challenges during construction and operation.
Additional Tools and Analyses:
Further investigations may require the following tools and analyses:
- Wind resource assessment: Detailed on-site wind measurement campaigns, wind flow modeling, and long-term data analysis.
- Environmental impact assessment: Assessing impacts on wildlife, habitat, noise, and visual landscape using specialized studies and modeling.
- Economic analysis: Evaluating project viability, cost estimation, and financial modeling to assess the economic feasibility and return on investment.
- Social impact assessment: Conducting surveys, interviews, and community consultations to understand social, cultural, and socioeconomic implications.
Learn more about: wind farm
brainly.com/question/30356732
#SPJ11
how does colombia differ from failed states like zimbabwe and sierra leone?
Colombia is a country located in South America. It is often contrasted with other failed states in Africa, such as Zimbabwe and Sierra Leone. Colombia has experienced political violence and corruption, but it has managed to avoid complete state failure.
In the 1980s and 1990s, Colombia was one of the most violent countries in the world. Drug cartels and armed rebel groups waged war on the government and each other. Thousands of people died, and Colombia was on the verge of becoming a failed state. However, in the 2000s, the government began to take action to improve security and reduce violence.The Colombian government has worked to combat drug trafficking and organized crime. The government has also made efforts to address poverty and inequality, which have contributed to the country's instability. While Colombia is not a perfect country, it has made progress in reducing violence and improving governance.In contrast, Zimbabwe and Sierra Leone have experienced complete state failure.
In Zimbabwe, corruption and political violence have undermined the government's legitimacy. The economy has collapsed, and people struggle to find food and basic necessities. The government has been accused of widespread human rights abuses.In Sierra Leone, a civil war that lasted from 1991 to 2002 left the country in ruins. Tens of thousands of people were killed, and many more were displaced. The government has struggled to establish order and provide basic services to its citizens. Poverty and corruption remain significant problems.Colombia is different from failed states like Zimbabwe and Sierra Leone in that it has managed to avoid complete state failure. Despite the challenges the country faces, it has made progress in reducing violence and improving governance.
To know more about government visit:
https://brainly.com/question/4160287
#SPJ11
Based on von Thünen's model of rural land use in an isolated state, which statement explains the most suitable place for a farmer to purchase a large parcel of land necessary for raising livestock?
a. The ring closest to the market, because livestock are perishable goods and need to reach the market quickly.
b. The ring closest to the market, because the land is more fertile for growing feed for livestock compared to other areas.
c. The second ring, because livestock are heavy and more expensive to transport to market.
d. The third ring, because the livestock would be closer to the suburban market areas with moderate transportation costs.
e. The ring farthest from the market, because the land is less expensive and outweighs transportation costs to get the livestock to market.
The statement that explains the most suitable place for a farmer to purchase a large parcel of land necessary for raising livestock based on von Thünen's model of rural land use in an isolated state is option E, that is, the ring farthest from the market, because the land is less expensive and outweighs transportation costs to get the livestock to market.
Von Thünen's model of rural land use in an isolated state explains that as you move away from the central market area, the production of crops will become less profitable due to the cost of transportation. The model consists of concentric rings with different land uses.The first ring is the market-gardening ring. This ring is used for the production of perishable goods such as fruits, vegetables, and dairy. It is also used for intensive livestock farming.The second ring is used for woodlots and forestry.
This is where lumber and firewood are produced.The third ring is used for extensive field crops such as wheat and corn. This ring is also used for grazing cattle and sheep.The fourth ring is used for animal grazing and extensive grain crops like rye and pasture. The final ring is used for wild game and unoccupied land.In conclusion, since livestock rearing falls under extensive animal husbandry, the third and fourth rings of von Thünen's model are more suitable for a farmer to purchase a large parcel of land necessary for raising livestock. However, the most appropriate choice is the ring farthest from the market, because the land is less expensive and outweighs transportation costs to get the livestock to market.
To know more about farmer visit:
https://brainly.com/question/18390861
#SPJ11
The purpose of CP schemes is ____________________.
A. to aide models in producing convection
B. to stop models from going overboard with way more convection than is actually occurring
C. to allow me to torture you.
D. to indicate if precipitation is due to convection or not.
The purpose of CP schemes is B. to stop models from going overboard with way more convection.
The CP scheme is designed to control the behavior of the convection. Convection can be costly to simulate because of the small scales involved, which can lead to computational instability. This scheme allows you to properly calculate the vertical transport of water vapor, heat, and momentum when the convection is strong.
As a result, precipitation amounts will be more realistic, and the behavior of large-scale circulation will be properly represented. However, one should keep in mind that the CP scheme is designed to produce an approximation of convection, not a perfect representation of it. Nonetheless, it is necessary for the proper functioning of many computer models.
Therefore the correct option is B. to stop models from going overboard with way more convection than is actually occurring
Learn more about CP schemes :https://brainly.com/question/13246787
#SPJ11
If a galaxy has a redshift z=3, what fraction of the universe's current size was the universe when the light was emitted from that galaxy?
The fraction of the universe's current size when the light was emitted from a galaxy with a redshift z=3 is approximately 1/4.
What portion of the current universe's size was the universe when the light from the galaxy was emitted?Redshift is a measure of the stretching of light waves due to the expansion of the universe. It indicates how much the wavelength of light has been shifted towards longer wavelengths. In the case of a redshift z=3, it means that the wavelength of the light has been stretched by a factor of 3.
The redshift of a galaxy is related to the scale factor of the universe at the time the light was emitted. The scale factor represents the relative size of the universe at a given time compared to its current size. With a redshift z=3, the scale factor would have been approximately 1/4 of its present value when the light from the galaxy was emitted.
This means that the universe was about one-fourth of its current size when the light from the galaxy with a redshift z=3 was emitted. It provides a glimpse into the past, allowing us to understand the state of the universe at different epochs.
Understanding the redshift of galaxies and its relationship to the expansion of the universe is a fundamental concept in cosmology. The discovery of redshift by Edwin Hubble in the early 20th century played a crucial role in the development of the Big Bang theory and our understanding of the evolution of the universe.
Redshift is commonly expressed as a dimensionless quantity, denoted by the symbol z. It is calculated by dividing the observed wavelength of light emitted by an object by the wavelength of that light as measured on Earth. The resulting value indicates how much the universe has expanded since the light was emitted.
By studying the redshift of distant galaxies, astronomers can infer the age of the universe at the time the light was emitted and trace the expansion history of the cosmos. The concept of redshift allows us to peer back in time and gain insights into the early stages of the universe's formation and development.
Learn more about light waves
brainly.com/question/1349593
#SPJ11
what does it mean if an igneous rock has an aphanitic texture?
If an igneous rock has an aphanitic texture, it means that the rock has a fine-grained or microcrystalline appearance. The term "aphanitic" is derived from the Greek word "aphanes," which means invisible or not visible.
In rocks with an aphanitic texture, the mineral crystals are too small to be seen. This indicates that the rock cooled relatively quickly, preventing the individual mineral crystals from growing to a larger size. Rapid cooling inhibits crystal growth and results in the formation of numerous small crystals.
Aphanitic textures are commonly observed in extrusive or volcanic igneous rocks, which solidify on or near the Earth's surface. Due to the rapid cooling associated with volcanic eruptions or lava flows, these rocks do not have enough time for the minerals to grow into larger crystals.
Therefore, if an igneous rock has an aphanitic texture, it means that the rock has a fine-grained or microcrystalline appearance.
For more details regarding igneous rock, visit:
https://brainly.com/question/2500550
#SPJ4
"Can a community become more resilient to the effects of climate change? create a claim, evidence and reasoning to support your answer"
Claim: Yes, a community can become more resilient to the effects of climate change.
Can a community become more resilient to the effects of climate change?Evidence: Numerous studies and examples demonstrate that communities can enhance their resilience to climate change impacts. For instance, cities like Copenhagen and Rotterdam have implemented innovative infrastructure designs and urban planning strategies to address rising sea levels and storm surges. These measures include constructing flood barriers, creating green spaces, and improving drainage systems. Additionally, communities around the world have adopted renewable energy sources, implemented sustainable agricultural practices, and enhanced natural resource management to mitigate climate risks.
Reasoning: Building resilience requires proactive efforts to minimize vulnerabilities and adapt to changing conditions. By investing in climate-resilient infrastructure, implementing sustainable practices, and promoting community engagement, a community can enhance its ability to withstand and recover from climate-related events. This approach involves integrating climate change considerations into urban planning, promoting sustainable resource management, and fostering collaboration among stakeholders. By taking these steps, communities can reduce risks, protect vulnerable populations, and create a more sustainable and resilient future in the face of climate change.
Climate change poses significant challenges to communities worldwide, including extreme weather events, sea-level rise, heatwaves, and altered precipitation patterns. However, communities have the potential to increase their resilience by adopting proactive measures that address these challenges. Resilience-building initiatives can include improving infrastructure, diversifying energy sources, enhancing ecosystem services, and implementing adaptive policies. By combining these strategies with community engagement and capacity building, communities can become better equipped to withstand the impacts of climate change.
Enhancing community resilience is a multidimensional process that requires the integration of scientific knowledge, local expertise, and societal values. It involves long-term planning, risk assessment, and the identification of adaptive pathways. Community participation and collaboration are essential for ensuring that resilience strategies are inclusive, equitable, and context-specific. By empowering individuals, fostering social cohesion, and promoting knowledge sharing, communities can collectively work towards a more resilient future.
Learn more about communities
brainly.com/question/31720342
#SPJ11
the most common hazard(s) are: what tectonic/geologic settings do they form in?
The most common hazards caused by tectonic/geologic activities are earthquakes, volcanic eruptions, and tsunamis. These natural phenomena are primarily associated with plate tectonics and geologic activity in subduction zones and along fault lines.
Earthquakes are a common hazard that occurs due to the movement of tectonic plates. The majority of earthquakes occur at the boundaries of tectonic plates, including divergent, convergent, and transform boundaries. These plates move against each other, and the friction results in earthquakes. The convergence of two plates, in particular, can lead to the formation of subduction zones. When an oceanic plate is subducted under a continental plate, it can result in the formation of volcanic arcs and trenches.
Volcanic eruptions, another common hazard, are often caused by tectonic activity. The movement of plates can lead to the formation of a magma chamber, which can then result in an eruption. Volcanoes can also occur at divergent plate boundaries. Tsunamis, on the other hand, are often triggered by earthquakes. When an earthquake occurs under the ocean, it can cause a sudden displacement of water, leading to the formation of a tsunami.
The above mentioned hazards form in tectonic/geologic settings such as plate boundaries and subduction zones, where tectonic plates are either diverging, converging, or sliding past each other.
To know more about Earthquakes visit:
https://brainly.com/question/30322293
#SPJ11
When is it okay to have fish density of 0.5 lb/gallon? You have extensive experience in fish culture You have a backup generator You have lots of disposable cash You are pumping liquid oxygen into your tank or you have a backup oxygen tank.
The appropriate scenario to have a fish density of 0.5 lb/gallon is when you are pumping liquid oxygen into your tank or you have a backup oxygen tank.
Fish density is a significant factor in fish farming and is utilized to evaluate the amount of fish in a given tank. Fish density is often expressed in pounds per gallon (lb/gal) or pounds per cubic foot (lb/ft3) and is frequently a concern of aquaculturists and other fish farmers.
There are a few considerations that must be taken into account before establishing fish density in a tank. The type of fish to be grown, the age and size of the fish, the water temperature, the feed type, and the filtration systems available are all factors to consider.
The appropriate scenario to have a fish density of 0.5 lb/gallon is when you are pumping liquid oxygen into your tank or you have a backup oxygen tank. In other situations, such as when you don't have a backup generator or lots of disposable cash, it is best to keep the fish density low.
Lowering the fish density ensures that the fish have enough oxygen and that the tank does not become too polluted.
Learn more about oxygen : brainly.com/question/26073928
#SPJ11
A fish density of 0.5 lb/gallon is often considered too high and not recommended for most aquaculture operations. However, there are some situations when this level of fish density can be okay, such as when an individual has extensive experience in fish culture, a backup generator, lots of disposable cash, or is pumping liquid oxygen into the tank, or has a backup oxygen tank.
Extensive experience in fish culture: If an individual has extensive experience in fish culture, they may be able to successfully manage a fish density of 0.5 lb/gallon. They will understand the best practices for feeding, monitoring water quality, and disease prevention, which will help them to maintain a healthy fish population.
Backup generator: In the event of a power outage, a backup generator can ensure that the fish tank's aeration and filtration systems remain operational. This can help to prevent fish deaths due to a lack of oxygen or build-up of toxic ammonia.
Lots of disposable cash: A high fish density requires a lot of resources, such as more food, equipment, and water treatments. If an individual has a lot of disposable cash, they can invest in the necessary resources to support a high fish density.
Pumping liquid oxygen into the tank or having a backup oxygen tank: Oxygen is essential for fish survival, and a high fish density requires a lot of oxygen. If an individual is pumping liquid oxygen into the tank or has a backup oxygen tank, they can ensure that the fish have an adequate supply of oxygen, even in a crowded tank
To know more about aquaculture visit :
https://brainly.com/question/275198
#SPJ11
TRUE/FALSE baking of rocks surrounding an igneous intrusion is called effects.
False. Baking of rocks surrounding an igneous intrusion is called contact metamorphism. The process of metamorphism involves changing the protolith, an existing rock, into a new rock with a different mineral composition or texture.
The rock stays essentially solid during the metamorphism process, which happens at temperatures over 150 °C (300 °F), as well as often at high pressures or in the presence of chemically active fluids. Weathering and diagenesis, which are changes that occur at or near the Earth's surface, are not the same as metamorphism. Metamorphism can take many different forms, including as regional, contact, hydrothermal, shock, and dynamic metamorphism. The typical temperatures, pressures, and rates at which they occur, as well as the degree to which reactive fluids are involved, vary between these.
To know more about metamorphism
https://brainly.com/question/30244981
#SPJ11
Is the following statement about our solar system true or false? Mars orbits the Sun at less than 60% of the speed of Earth. true false.
The statement "Mars orbits the Sun at less than 60% of the speed of Earth" is false. Mars does not orbit the Sun at less than 60% of the speed of Earth. In fact, the orbital speeds of planets in our solar system depend on their distance from the Sun and obey Kepler's laws of planetary motion.
According to Kepler's laws, planets closer to the Sun have shorter orbital periods and higher orbital speeds compared to those farther away. Since Mars is further from the Sun than Earth, it has a longer orbital period, meaning it takes Mars more time to complete one orbit around the Sun compared to Earth.
However, despite the longer orbital period, Mars does not orbit the Sun at a significantly slower speed compared to Earth. The orbital speed of Mars is still considerable and influenced by its distance from the Sun. On average, Mars orbits the Sun at a speed of approximately 24 kilometers per second, while Earth orbits at an average speed of about 29.8 kilometers per second.
Therefore, it is important to note that Mars orbits the Sun at a speed that is not less than 60% of Earth's orbital speed. The specific speeds and distances can vary depending on the positions of the planets in their respective orbits, but Mars maintains a significant orbital velocity relative to Earth.
To know more about Important visit-
brainly.com/question/24051924
#SPJ11
A first-magnitude star is 100 times brighter than a sixth magnitude star, which means each difference in magnitude represents a brightness change of 2.51 times.
Compare the brightness of Star X which has an apparent magnitude (m) of +1.08 to Star Y, which has an apparent magnitude of +0.06.
BChange =
The brightness of stars is rated on a scale known as magnitude, with the lower magnitudes indicating the brightest stars and higher magnitudes representing dimmer stars.
This scale is based on a difference of 2.51 between adjacent magnitudes. A star's brightness is determined by its apparent magnitude, which is determined by its distance from Earth and the amount of light it emits. A first-magnitude star is 100 times brighter than a sixth magnitude star, which implies that each difference in magnitude represents a brightness change of 2.51 times.
Comparing the brightness of Star X with an apparent magnitude (m) of +1.08 to Star Y, with an apparent magnitude of +0.06, Star X is dimmer. The calculation will be as follows: Change = (2.51)^(m2 - m1)Change = (2.51)^(0.06 - 1.08)Change = (2.51)^(-1.02)Change = 0.398 or 0.4 (rounded to the nearest tenth)Therefore, Star X is 0.4 times the brightness of Star Y.
To know more about magnitude visit:
https://brainly.com/question/31022175
#SPJ11
choose the correct answer
3. The movement in the strike slip fault is: a. Parallel to the strike of the fault plane. b. Parallel to the dip of the fault plane. c. Parallel to the strike of the bed.
In a strike-slip fault, the movement occurs primarily along a horizontal direction parallel to the strike of the fault plane. Option a is correct.
Strike-slip faults are caused by shear stress when rocks slide past each other along a fault plane. In a strike-slip fault, the movement is parallel to the strike of the fault plane. This is in contrast to a dip-slip fault where the movement is parallel to the dip of the fault plane.
The strike-slip fault is the result of horizontal shear stress that occurs when rocks slide past each other in opposite directions on the same fault plane. The San Andreas fault in California is an example of a strike-slip fault.
Therefore, a is correct.
Learn more about strike slip fault https://brainly.com/question/30555421
#SPJ11
A strike-slip fault is a fracture in the Earth's crust where the rock on one side of the fault moves horizontally in relation to the rock on the other side. The movement along the strike-slip fault is parallel to the strike of the fault plane. Therefore, the correct answer is a) parallel to the strike of the fault plane.
A strike-slip fault is a type of fault where rocks on opposite sides of the fault move past each other parallel to the strike (the direction of the line that represents the intersection of a rock layer or fault with a horizontal plane) of the fault plane. In such faults, there is no apparent movement or vertical displacement of the rock on either side of the fault surface. Since the movement along the strike-slip fault is parallel to the strike of the fault plane, this causes a significant change in the landscape. Therefore, the correct answer is a) parallel to the strike of the fault plane.
To know more about parallel visit:
https://brainly.com/question/22746827
#SPJ11
Numerical weather predictions are labeled in UTC (sometimes abbreviated as "Z"), the time in Greenwich, England during the winter months when the United Kingdom is NOT on daylight time. Find a World Clock Time Converter to perform a time conversion. What time is it in St. Louis, MO during the winter (St. Louis is on Central Standard Time or CST) when it is 1500 UTC? Remember this answer for the next question. O 6 AM O 9 AM O Noon O 3 PM OOOO
Time is it in St. Louis, MO during winter when it is 15:00 UTC is 9 AM
To find what time is it in St. Louis, MO during winter when it is 15:00 UTC, we can use the World Clock Time Converter. St. Louis is in the Central Standard Time (CST) zone, which is 6 hours behind UTC.
Therefore, we need to subtract 6 hours from 1500 UTC to get the local time in St. Louis.1500 UTC - 6 hours = 09:00 CST or 9 AM. According to this calculation, it will be 9 AM in St. Louis, MO during winter when it is 15:00 UTC.
Therefore, the correct answer is 9 AM.
Learn more about time: brainly.com/question/26046491
#SPJ11
Numerical weather predictions are labeled in UTC (sometimes abbreviated as "Z"), the time in Greenwich, England during the winter months when the United Kingdom is NOT on daylight time. World Clock Time Converter can be used to perform a time conversion.
In order to find out what time it is in St. Louis, MO during the winter (St. Louis is on Central Standard Time or CST) when it is 1500 UTC, we need to perform a time conversion. One hour is subtracted from the time difference to account for Daylight Saving Time during the summer months.
The formula to convert UTC to CST is: Central Standard Time = UTC – 6 hours
The difference between St. Louis, MO, and Greenwich, England, is 6 hours. So to convert 1500 UTC to CST, we need to subtract 6 hours from 1500 UTC.
1500 UTC - 6 hours = 0900 CST
It is 9:00 AM in St. Louis, MO, during the winter (CST) when it is 1500 UTC. So, the correct option is 9 AM.
To know more about World Clock visit :
https://brainly.com/question/12528769
#SPJ11
How do rotation curves of spiral galaxies give evidence that dark matter exists?
Rotation curves of spiral galaxies give evidence that dark matter exists. The rotation curve of a galaxy is the curve showing how its angular velocity changes with distance from the center of the galaxy.
For a typical galaxy, its rotation curve rises linearly from the center and then flattens to a roughly constant velocity at large radii. This means that the stars in the galaxy are moving faster than would be expected based on the mass of visible matter that we can see. The curve of the rotation of galaxies, particularly spiral galaxies, provides evidence for the existence of dark matter.
The velocity of objects in the galaxy is due to the gravity exerted on them by all matter present in the galaxy. It is expected that the velocity of the objects should reduce with the distance from the center of the galaxy, as the gravity force would get weaker with increasing distance. However, the velocity of stars in the outer regions of the galaxy remains the same even if the distance from the center is increased.
This implies that there is still matter exerting a gravitational force that is yet to be detected, which we call dark matter. Dark matter is a matter that does not interact with electromagnetic radiation, so it cannot be detected directly by telescopes. However, its presence can be detected indirectly by studying the gravitational effects it has on visible matter, as well as on the rotation curves of galaxies.
This means that the observed rotation curves of spiral galaxies can only be explained by the existence of dark matter.
You can learn more about spiral galaxies at: https://brainly.com/question/474903
#SPJ11
