What is the name of an isotope having 29 protons and 23 neutrons? Write the elemental symbol and mass number of this isotope.

The answer is [OH⁻] = 1 x 10⁻⁴.

[OH⁻] = H₂O ÷ [H₃O⁺]

[OH⁻] = 1 x 10⁻¹⁴ / 1 x 10⁻¹⁰

[OH⁻] = 10⁻⁴

The wavelength is obtained as 122 nm. Option A

We know that from the Bohr model of the atom, an electron can move from a higher energy level to a lower energy level or from a lower energy level to a higher energy level. This is the idea of energy quantization as put forward by Neill Bohr.

The wavelength can be obtained by the use of the formula;

1/λ = RH(1/n^2initial - 1/n^2 final)

λ = wavelength of the emitted light

RH = Rydberg's constant

n intial = initial energy level

nfinal = final energy level

Thus;

1/λ = 1.09 * 10^7(1/1^2 - 1/2^2)

1/λ = 1.09 * 10^7( 1 - 0.25)

λ = 122 nm

Learn more about the wavelength:https://brainly.com/question/13533093

#SPJ1

Answer:

the half life of reaction is 2 hours which is consist half life of consist in the first order reaction has the order reaction is one

Answer:

See below

Explanation:

Calcium and chlorine are the reactants .....  they 'react' in a chemical reaction to form the compound calcium chloride .

Answer: Iron

Explanation: IRON : Iron is an element with symbol Fe and atomic number 26 2) it is the fourth most common element in earth's crust 3) It is a heavy silvery grey metal belongs to the first transition series. 4) High ductility and malleability 5) It is a good conductor.

The identity of the substance is Iron.

Learn more about periodic table on

https://brainly.com/question/2140373

#SPJ1

The answer is C which is Reading Writing

A student who prefers to study by converting lecture or written information. The learning style of the student is reading writing. Thus option c is correct.

Learning style is defined as the hypothesis that learners can be classified based on how they process information.

It can also be defined as a set of theories aimed at explaining variances in individual learning.

There are basically seven types of learning style.

Reading and writing is one of the best style of learning as by this we can memorize the things for very long time.

Thus, the learning style of the student is reading writing. Thus option c is correct.

To learn more about learning style, refer to the link below:

https://brainly.com/question/1235988

#SPJ2

https://brainly.com/question/24206619

C₁₂H₂₂O₁₁

1 )

Molar mass = 12 x 12 + 22 x 1 + 11 x 16

= 144 + 22 + 176

= 342 g

2 )

100 mL of 1.0 M will contain 1.0 x0.100 = .1 mole of sucrose

0.1 mole of sucrose = 0.1 x 342 g = 34.2 g of sucrose.

So , mass of sucrose required is 34.2 g .

3 )

100 mL of .5 M sucrose = .100 x .5 mole of sucrose

= .05 mole of sucrose

.05 mole of sucrose = .05 x 342 g = 17.1 g of sucrose .

So , mass of sucrose required is 17.1 g .

The area of the periodic table that has the most elements included within it is metals (option A).

Periodic table of elements is a tabular chart of the chemical elements according to their atomic numbers so that elements with similar properties are in the same group (column).

The periodic table encompasses chemical elements arranged horizontally and vertically. The periodic table is made up of groups and periods.

However, most of the elements on the periodic table are metals because virtually 93 elements are metals.

Therefore, the area of the periodic table that has the most elements included within it is metals.

Learn more about periodic table at: https://brainly.com/question/11155928

#SPJ1

The environmental conditions of the ocean are:

In our oceans, there are known to be a lot of environmental conditions that are known to often affect the growth, survival and also the productivity of marine organisms. These are the ones listed above.

Note that the increased concentration of chemicals, e.g.  nitrogen and phosphorus is one that can be harmful to marine life.

Hence, The environmental conditions of the ocean are:

Learn more about ocean from

https://brainly.com/question/25154137

#SPJ1

Answer:

Iron (II) Phosphate

Explanation:

The symbol of iron Fe and phosphate PO4 are reacted to form Iron Phosphate

The name of the compound Fe₃(PO₄)₂ is Iron(II) Phosphate. In this case, the iron ion is in the +2 oxidation state, and therefore, the compound is named "Iron(II) Phosphate." Hence option C is correct.

In this compound "Fe" represents the chemical symbol for iron. "3" following Fe indicates the presence of three iron atoms in the compound.

"(PO₄)" represents the phosphate ion, which consists of one phosphorus atom and four oxygen atoms. "2" following (PO₄) indicates the presence of two phosphate ions in the compound.

When naming this compound, we use Roman numerals in parentheses to indicate the oxidation state of the metal ion since iron can exist in different oxidation states.

Therefore, option C) Iron (II) Phosphate is correct.

To know more about Iron(II) Phosphate:

https://brainly.com/question/33321840

#SPJ3

Answer:

30ml

Explanation:

the acid-base solution just begins to turn pink and the pH reaches 7, indicating that the base has neutralized the acid. By reading the buret, it is found that 30 ml of NaOH was needed to neutralize the HCl.

answer = 9.96x10^-3

I hope that help you

The equilibrium constant of the reaction is 76176.

In chemistry, the equilibrium constant is used to show the extent to which we can convert reactants to products in a given chemical process. A large value of the equilibrium constant shows that most of the reactants are converted into products under the given conditions. A small value of the equilibrium constant shows that most of the reactants are not converted into products.

Thus, if we have the reactions;

(1) 1/2 X2(g) + 1/2 Y2(g) ↔ XY(g)

(2) 2XY(g) ↔ X2(g) + Y2(g)

It then follows that;

K1 = [XY]/[X2]^1/2 [Y2]^1/2

K2 =  [XY]^2/[X2] [Y2]

It is clear that;

K2 = (K1)^2

K2 = (276)^2

K2 = 76176

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

Answer:

Co2

Explanation

An organic compound includes Carbon and Hydrogen both bonded

Taking into account the definition of dilution, moles of solute (option C) is the only thing about the solution that does NOT change.

When it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.

Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

In summary, moles of solute (option C) is the only thing about the solution that does NOT change.

Learn more about dilution:

brainly.com/question/6692004

brainly.com/question/16343005

brainly.com/question/24709069

#SPJ1

Explanation:

we can use the "ideal gas law" :-

PV = nRT

p :- pressure ( pa )

V :- Volume ( m³ )

n :- amount of substance ( mol )

R :- Ideal gas constant ( 8.314 Jmol-¹ K-¹ )

T :- Temperature ( K)

Answer: Lithium - 8

Answer:

Lithium-8

Explanation:

The atom with three protons and five neutrons that has a mass number of eight is known as lithium-8.

[tex] \large \underline{ \boxed{ \tt \red{Pounds \: per \: square \: inch}}}[/tex]

[tex] \: \: \: [/tex]

( PSI ) is a measurement of pressure in the Imperial system of measurement.

[tex] \: \: \: [/tex]

hope helps ~

The likely thing which will occur when an atom of this element 1s²2s²2p6 3s¹ comes near an atom having seven valence electrons is what is referred to as electrovalent bonding.

This is also referred to as ionic bonding and involves the transfer of atoms from one element to another. This is done so as to ensure that an octet configuration is achieved.

The element 1s²2s²2p6 3s¹  is Sodium and will undergo ionic bonding with the chlorine. One valence electron is transferred from the sodium to the chlorine which makes them stable.

This is therefore the reason why electrovalent bonding will most likely between the two elements.

Read more about Electrovalent bonding here https://brainly.com/question/19819376

#SPJ1

Answer:

75 kg or 75,000 g

Explanation:

Mass is a measurement that describes the amount of matter within an object. This is a constant measurement that does not change regardless of the object's location.

As such, a person's mass would be the same at both elevations.

**Their weight, however, may change.

** 1 kg = 1,000 g

Answer:

402 kJ

Explanation:

Because the energy of the reaction is positive, the reaction is endothermic. This means energy is a reactant.

You can determine how much energy/heat is absorbed using the balanced chemical equation. You can convert the moles A using the ratio composed of the coefficient in front of A and the energy required for each reaction.

2A + B + 309 kJ ⇌ 2C + 2D

2.60 moles A             309 kJ
----------------------  x  --------------------  = 402 kJ
                                 2 moles A

The boiling point of plain water is less than the boiling point of both salt and sugar water.

Boiling point can be defined as the point when the pressure exerted by the surroundings upon a liquid is equal to the pressure exerted by the vapour of the liquid.

The boiling point of plain water is 100°C which increases upon addition of solute substances such as salt and sugar.

But salts are usually made up of ionic bonds while sugar are made up of covalent bonds. This means that more energy would be required to boil salt solution due to its ionic bonds.

Therefore, the boiling point of salt water is highest following sugar water before plain water which is the lowest.

Learn more boiling point here:

https://brainly.com/question/14008526

#SPJ1

Answer:

2 Al and 3 S

Explanation:

Al2S3 so 2 Al and 3 S

The concentration of carbon monoxide at equilibrium is 0.209 M.

CO2 = 2 mol/5 L = 0.4

H2 = 1.5 mol/5L = 0.3

Create ICE table as shown below

        CO2(g)    +     H2(g) ↔       CO(g)    +     H2O(g)

I          0.4               0.3                0                  0

C        - x                 - x                 x                   x

E        0.4 - x           0.3 - x           x                   x

Kc = [CO][H₂O] / [CO₂][H₂]

2.5 = (x²)/(0.4 - x)(0.3 - x)

x² = 2.5(0.4 - x)(0.3 - x)

x² = 2.5(0.12 - 0.7x + x²)

x²  = 0.3 - 1.75x + 2.5x²

0 = 1.5x² - 1.75x + 0.3

solve the quadratic equation using formula method;

x = 0.209

Thus, the concentration of carbon monoxide at equilibrium is 0.209 M.

Learn more about concentration here: https://brainly.com/question/17206790

#SPJ1

Answer:

1.2   ( two significant digits)

Explanation:

5.4 - 4.21        answer should only have the the number of significant digits as the number in the equation with the least number of significant digits... in this case   5.4   is only two significant digits....so the answer should only have two significant digits

5.4 - 4.21 = 1.19     round to two digits = 1.2    

Answer:

2.52 g NaCl

Explanation:

(Step 1)

To find the mass, you first need to find the moles NaCl. This value can be found using the molarity ratio:

Molarity = moles / volume (L)

After you convert mL to L, you can plug the given values into the equation and simplify to find moles.

136.9 mL / 1,000 = 0.1369 L

Molarity = moles / volume

0.315 M = moles / 0.1369 L

0.0431 = moles

(Step 2)

Now, you can use the molar mass to convert moles to grams.

Molar Mass (NaCl): 22.990 g/mol + 35.453 g/mol

Molar Mass (NaCl): 58.443 g/mol

0.0431 moles NaCl           58.443 g
------------------------------  x  -------------------  =  2.52 g NaCl
                                            1 mole

Answer:

C.) [tex]K = {[CO_{2} ]^{2} [H_2O] }[/tex]

Explanation:

The general equilibrium expression looks like this:

[tex]K = \frac{[B]^b[C]^{c} [D]^{d} }{[A]^{a}} }[/tex]

In this expression,

-----> K = equilibrium constant

-----> uppercase letters = formulas

-----> lowercase letters = balanced equation coefficients

Solids are not included in the expression, so Ca(HCO₃)₂(s) and CaO(s) should be left out. The products should be in the numerator and the reactants are in the denominator. This makes the expression:

[tex]K = \frac{[B]^b[C]^{c} [D]^{d} }{[A]^{a}} }[/tex]                                  <----- Equilibrium expression

[tex]K = {[CO_{2} ]^{c} [H_2O]^{d} }[/tex]                             <----- Insert gaseous formulas

[tex]K = {[CO_{2} ]^{2} [H_2O] }[/tex]                               <----- Insert coefficients